summaryrefslogtreecommitdiff
path: root/src/qcam/main_window.h
AgeCommit message (Collapse)Author
2020-08-14libcamera: request: Declare a using directive for map of buffersNiklas Söderlund
Declare a using directive for the map of Stream to FrameBuffer. Update all users of Request::buffers() to use the new usage directive. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-17qcam: main_window: Introduce initial hotplug supportUmang Jain
Hook up various QCam UI bits with hotplug support introduced in previous commits. This looks good-enough as first steps to see how the hotplugging functionality is turning out to be from application point-of-view. One can still think of few edge case nuances not yet covered under this implementation especially around having only one camera in the system and hotplugging/hot-unplugging it. Hence, those are intentionally kept out of scope for now. It might require some thinking on how to handle it on application level having additional time on hand. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-03qcam: Pass request metadata to DNG writerLaurent Pinchart
The DNG writer will use the metadata to populate DNG tags. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-02qcam: Add RAW capture supportNiklas Söderlund
Add a toolbar button that captures RAW data to disk. The button is only enabled if the camera is configured to provide a raw stream to the application. Only when the capture action is triggered will a request with a raw buffer be queued to the camera. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-02qcam: Allow for a second raw stream to be configuredNiklas Söderlund
Allow a second stream to be configured for raw capture. This change only adds support for configuring and allocating buffers for the second stream. Later changes are needed to queue the allocated buffers to the camera when the user wishes to capture a raw frame. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-01qcam: Make use of StreamKeyValueParserNiklas Söderlund
Use the StreamKeyValueParser helper to parse stream configuration from the command line. This extends qcam to accept role hints and pixel format in addition to a size. Currently only one viewfinder stream is supported, add a check to keep this behavior. Going forward this restriction will be lifted to support more then one stream. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-04-30qcam: main_window: Make cameraCombo_ privateUmang Jain
This commit introduces no functional changes. This is required so that the combo-box list can be managed conveniently from various private functions in subsequent commit. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-24qcam: viewfinder: Make the viewfinder hold a reference to a bufferLaurent Pinchart
The viewfinder is currently expected to render frames to the screen synchronously in the display() function, or at least to copy data so that the buffer can be queued in a new request when the function returns. This prevents optimisations when the capture format is identical to the display format. Make the viewfinder take ownership of the buffer, and notify of its release through a signal. The release is currently still synchronous, this will be addressed in a subsequent patch. Rename the ViewFinder::display() function to render() to better describe its purpose, as it's meant to start the rendering and not display the frame synchronously. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: viewfinder: Move multi-planar check into viewfinderLaurent Pinchart
The lack of support for multiplanar buffers comes from the viewfinder. Move the corresponding check from MainWindow. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: viewfinder: Add MappedBuffer to store memory mapping informationLaurent Pinchart
The new MappedBuffer structure replaces the std::pair<> used in the mapped buffers map, and allows passing data to the ViewFinder::display() function in a more structured way. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: main_window: Document functions and reorganize member dataLaurent Pinchart
The qcam application is our reference implementation of a libcamera GUI application. Document the code of the MainWindow class to make it easier to follow, and reorganize the member data in logical groups for clarity. No code change. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: main_window: Replace start and stop actions with a toggle actionLaurent Pinchart
The main window toolbar contains a start button and a stop button. This allows starting an already started camera (which is currently not handled and results in an error) or stopping an already stopped camera. Replace the two actions with a single start/stop toggle action, preventing UI misuse and reducing confusion. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: main_window: Move capture event processing to main threadLaurent Pinchart
To avoid blocking the camera manager for a long amount of time, move capture event processing to the main thread. Captured buffers are added to a queue and an event is posted to the main window to signal availability of a buffer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-03-24qcam: main_window: Move request queuing to a separate functionLaurent Pinchart
Requests are requeued synchronously from the completion handler. To prepare for delayed requeuing, move the queuing to a separate function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-02-14qcam: Provide save image functionalityKieran Bingham
Implement a save image button on the toolbar which will take a current viewfinder image and present the user with a QFileDialog to allow them to choose where to save the image. Utilise the QImageWriter to perform the output task. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-02-14qcam: Provide initial icon buttons "Play/Stop"Kieran Bingham
Provide Quit, Play, Stop icons. Create a Qt resource to compile icons into the binary and present them on the toolbar. Update the Quit button with a 'cross', and implement Play/Stop buttons. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-02-14qcam: Introduce a toolbar and camera switchingKieran Bingham
Implement a quit button, and a list of cameras. Selecting a different camera from the Toolbar will stop the current stream, and start streaming the chosen camera device if it can be acquired. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-02-14qcam: Store CameraManager as class memberKieran Bingham
Intialise a local copy of the CameraManager instance to ease access to the CameraManager which is frequently utilised. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12qcam: Cache buffer memory mappingNiklas Söderlund
With the buffer allocator in use it's possible to cache the dmabuf memory mappings when starting the camera instead of mapping and unmapping them each time. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: Switch to FrameBuffer interfaceNiklas Söderlund
Switch to the FrameBuffer interface where all buffers are treated as external buffers and are allocated outside the camera. Applications allocating buffers using libcamera are switched to use the FrameBufferAllocator helper. Follow-up changes to this one will finalize the transition to the new FrameBuffer interface by removing code that is left unused after this change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-19libcamera: camera: Remove explicit stream to buffer map in requestCompleted ↵Niklas Söderlund
signal The stream to buffer map in the requestCompleted signal is taken directly from the request which is part of the same signal. Remove the map as it can be fetched directly from the request. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-10-25qcam: Don't ask for a camera when only one existsKieran Bingham
If there is only one camera exposed by libcamera, there is little value in asking the user to choose it. Automatically select it, and remove the need to ask the user to select 'ok' from a Dialog box. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-08-19qcam: Pass camera manager to MainWindow classLaurent Pinchart
Pass the CameraManager instance from the main() function to the MainWindow class instead of accessing it through CameraManager::instance(). This prepares for the removal of the CameraManager::instance() method. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-17libcamera: qcam: Allow specifying sizes on command lineJacopo Mondi
Add a '-s|--size' option to qcam to allow selecting the stream resolution using a command line option. If the sizes are not supported by the camera, they get automatically adjusted and the user notified via an output message. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Add an accessor to the BufferMemoryLaurent Pinchart
Buffer instances reference memory, which is modelled internally by a BufferMemory instance. Store a pointer to the BufferMemory in the Buffer class, and populate it when the buffer is queued to the camera through a request. This is useful for applications to access the buffer memory in the buffer or request completion handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Split memory information to BufferMemoryLaurent Pinchart
The Buffer class is a large beast the stores information about the buffer memory, dynamic metadata related to the frame stored in the buffer, and buffer reference data (in the index). In order to implement buffer import we will need to extend this with dmabuf file descriptors, making usage of the class even more complex. Refactor the Buffer class by splitting the buffer memory information to a BufferMemory class, and repurposing the Buffer class to reference a buffer and to store dynamic metadata. The BufferMemory class becomes a long term storage, valid and stable from the time buffer memory is allocated to the time it is freed. The Buffer class, on the other hand, becomes transient, is created on demand when an application requires a buffer, is given to a request, and is deleted when the request completes. Buffer and BufferMemory don't need to be copied, so their copy constructor and assignment operators are deleted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-04qcam: Update window title with FPSKieran Bingham
Provide an average FPS in the QCam title bar to show the current rate of frame processing. The QCam compilation is updated to process the Qt MoC headers to support signals and slots accordingly. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-04qcam: Add the version string to the titleKieran Bingham
Provide the version string reported by the libcamera library on the qcam test utility. This helps confirm the exact version of the library that is being used while testing. The version string is stored in the MainWindow so that it can be reused without reconstructing. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-04qcam: Move static timestamp to MainWindowKieran Bingham
The 'last' buffer timestamp is stored as a static. Rename the variable to a more descritive 'lastBufferTime' and move it to the class instance. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23libcamera: camera: Return a pointer from generateConfiguration()Laurent Pinchart
To prepare for specialising the CameraConfiguration class in pipeline handlers, return a pointer to a camera configuration instead of a reference from Camera::generateConfiguration(). The camera configuration always needs to be allocated from the pipeline handler, and its ownership is passed to the application. For symmetry, change Camera::configure() to take a CameraConfiguration pointer instead of a reference. This aligns with our coding practice of passing parameters that are modified by the callee by pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: camera: Rename configureStreams() and streamConfiguration()Laurent Pinchart
Rename the configureStreams() and streamConfiguration() methods to configure() and generateConfiguration() respectively in order to clarify the API. Both methods deal with CameraConfiguration objects, and are thus not limited to streams, even if a CameraConfiguration currently contains streams only. While at it, remove the qcam MainWindow::configureStreams() method that is declared but never defined or used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-09libcamera: Switch to CameraConfigurationNiklas Söderlund
Implement the camera configuration thru out the library, tests, cam and qcam tools. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-03-29qcam: Add Qt-based GUI applicationLaurent Pinchart
qcam is a sample camera GUI application based on Qt. It demonstrates integration of the Qt event loop with libcamera. The application lets the user select a camera through the GUI, and then captures a single stream from the camera and displays it in a window. Only streams in YUYV formats are supported for now. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>