| Age | Commit message (Collapse) | Author |
|---|
|
Apply to calculateBDS() function the content of commit 243d134 ("Fix
some bug for some resolutions") from
https://github.com/intel/intel-ipu3-pipecfg.git.
The calculated BDS sizes are filtered by height and not only by width
anymore.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
As reported in https://bugs.libcamera.org/show_bug.cgi?id=32
allowing resolutions < IF_CROP_MAX leads to a not manageable number
configurations to be tested, slowing down the ImgU pipe configuration
to a point which is not acceptable for production devices.
Filter all resolutions < IF_CROP_MAX to maintain the run-time complexity
acceptable and remove the safety check that was meant to avoid overflows
when computing the IF rectangle sizes.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=32
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Apply the last three hunks of commit 243d134 ("Fix some bug for some
resolutions") from https://github.com/intel/intel-ipu3-pipecfg.git
to the BDS calculation procedure.
The BDS calculation is now perfomed by scaling both width and height,
and repeated by scaling width first.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Range-based for loops are handy and widely preferred in C++, but are
limited in their ability to replace for loops that require access to a
loop counter. The enumerate() function solves this problem by wrapping
the iterable in an adapter that, when used as a range-expression, will
provide iterators whose value_type is a pair of index and value
reference.
The iterable must support std::begin() and std::end(). This includes all
containers provided by the standard C++ library, as well as C-style
arrays.
A typical usage pattern would use structured binding to store the index
and value in two separate variables:
std::vector<int> values = ...;
for (auto [index, value] : utils::enumerate(values)) {
...
}
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
With the recent change to merge existing Request metadata with the
ControlList provided by the IPA in commit fcfb1dc02a6b ("libcamera:
raspberry: Report sensor timestamp"), we can now write the
controls::ScalerCrop value at the start of the pipeline instead of at
the end.
This change simplifies the logic slightly, and allows us to write all
metadata items to the Request in one place.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Write the controls::SensorTimestamp value in the Request metadata when
the request is popped from the queue ready to run the pipeline. This
ensures that the timestamp is written to the correct Request item,
which may not be at the top of the queue when the Unicam buffer dequeue
occurs.
Fixes: fcfb1dc02a6b ("libcamera: raspberry: Report sensor timestamp")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Since meson v0.49.0, join_paths() is equivalent to '/' hence,
drop and replace it with '/' short-hand in meson files.
This commit does not introduce any functional changes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The controller algorithms currently run on every frame provided to the
IPA by the pipeline handler. This may be undesirable for very fast fps
operating modes where it could significantly increase the computation
cycles (per unit time) without providing any significant changes to the
IQ parameters. The added latencies could also cause dropped frames.
Pass the FrameBuffer timestamp to the IPA through the controls. This
timestamp will be used to rate-limit the controller algorithms to run
with a minimum inter-frame time given by a compile time constant,
currently set to 16.66ms. On startup, we don't rate-limit the algorithms
until after the number of frames required for convergence.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
change
The Raspberry Pi pipeline handler does not update the sensor format
using CameraSensor::setFormat(), so it must manually force the update of
the associated ControlInfoMap.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The minimum and maximum vblanking can change when a new format is
applied to the sensor subdevice, so be sure to retrieve up-to-date
values.
The V4L2Device acquires the new updateControlInfo() method to perform
this function, and which the CameraSensor calls automatically if its
setFormat method is used to update the sensor.
However, not all pipeline handlers invoke the setFormat method
directly, so the new method must be made publicly available for
pipeline handlers to call if they need to.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Register static properties in the CameraSensor class by inspecting the
camera sensor properties database.
Static properties are overridden by properties retrieved from
the kernel interface at run-time if any overlap between the two
sets occurs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a database of camera sensor properties, which contains
information on the camera sensor which are not possible, or desirable,
to retrieve from the device at run time.
The camera sensor database is accessed through a static function and
is indexed using the camera sensor model as reported by
properties::Model.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlList merge operation is protected with an ASSERT to guarantee
that the two lists are compatible.
Unfortunately this assertion fails when we run IPAs in an isolated case
as while the lists are compatible, the isolated IPA has a unique
instance of the id map. This breaks the pointer comparison, and the
assertion fails with a false positive.
Remove the assertion, leaving only a todo in it's place as this breaks
active users of the library.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=31
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Report the sensor's timestamp in the Request metadata by using the
Unicam::Image buffer timestamp as an initial approximation.
The buffer's timestamp is recorded at DMA-transfer time, and it does not
theoretically matches the 'start of exposure' definition, but when used
to compare two consecutive frames it gives an acceptable estimation of
the sensor frame period duration.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When a Request is completed upon receiving the IPA produced metadata,
the metadata associated with the Request are over-written, deleting
the information set at output buffer completion, such as the
SensorTimestamp.
This commit applies to the RaspberryPi pipeline handler the same change
applied to IPU3 in commit 2ee3dd57e2fc ("libcamera: ipu3: Merge IPA
metadata controls").
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
I got fooled by the documentation of setRequest() implying that the
function is meant to be called by pipeline handlers only, which it is
used in the Request class at Request::addBuffer() and Request::reuse()
time.
Rework the documentation to report that.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the sensor's timestamp in the Request metadata using the
completed buffer timestamp.
The buffer's timestamp reports the video capture buffer processing time,
and it does not theoretically matches the 'start of exposure'
definition.
VIMC being a testing platform and the test driver completes the buffers
for each media entity connected in the pipeline one after the other, the
current solution is acceptable for the pipeline.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the sensor's timestamp in the Request metadata using the
completed buffer timestamp.
The buffer's timestamp is recorded at DMA-transfer time, and it does not
theoretically matches the 'start of exposure' definition. Record this with
a \todo entry.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the sensor's timestamp in the Request metadata using the
completed buffer timestamp.
The buffer's timestamp is recorded at DMA-transfer time, and it does not
theoretically matches the 'start of exposure' definition. Record this with
a \todo entry.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When a Request is completed upon receiving the IPA produced metadata,
the metadata associated with the Request are over-written, deleting
the information set at output buffer completion, such as the
SensorTimestamp.
This commit applies to the RkISP1 pipeline handler the same change
applied to IPU3 in commit 2ee3dd57e2fc ("libcamera: ipu3: Merge IPA
metadata controls").
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the sensor's timestamp in the Request metadata using the
completed buffer timestamp.
The UVC driver reports timestamps of SOE event through metadata, for
which there is no support in the current pipeline implementation.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When a Request is completed upon receiving the IPA produced metadata,
they should be merged with the metadata set by the pipeline handler
before reporting them to applications.
Use ControlList::merge() to collect the IPA produced controls to the
request's metadata.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the sensor's timestamp in the Request metadata by using the
CIO2 buffer timestamp as an initial approximation.
The buffer's timestamp is recorded at DMA-transfer time, and it does not
theoretically matches the 'start of exposure' definition, but when used
to compare two consecutive frames it gives an acceptable estimation of
the sensor frame period duration.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Destage the 'SensorTimestamp' control, which is used by pipeline
handlers to report the time when the first active line of the sensor's
pixel array is exposed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a new ControlList::merge() function to merge two control lists by
copying in the values in the list passed as parameters.
This can be used by pipeline handlers to merge metadata they populate
with metadata received from an IPA.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[reimplement the function by not using std::unordered_map::merge()]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a check, that makes sure that the given FrameBuffer is associated
to a RkISP1FrameInfo instance. The current code tries to access the
frame info without checking if it actually exists.
Fixes: 0eb65e14e ("libcamera: pipeline: rkisp1: Attach to an IPA")
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
V4L2Device::updateControls() takes two arguments, raw array and
its size, for the v4l2_ext_control values. This replaces it with
libcamera::Span.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The original code uses Variable-Length-Array, which is not
officially supported in C++. This replaces the array with
std::vector.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The original code uses Variable-Length-Array, which is not officially
supported in C++. This replaces the array with std::vector.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When the CIO2 returns a cancelled buffer, we will not queue buffers
to the IMGU.
These buffers should be explicitly marked as cancelled to ensure
the application knows there is no valid metadata or frame data
provided in the buffer.
Provide a cancel() method on the FrameBuffer to allow explicitly
cancelling a buffer.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The RkISP1FrameInfo structure associated data sent to the IPA and is
essential for handling events.
If it can not be found, this is a fatal error which must be fixed.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The FrameInfo structure associates the data sent to the IPA
and is essential for handling events.
If it can not be found, this is a fatal error which must be fixed.
While we're changing the line, also correct a spelling error for
'Information'.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the camera manager calls stop on a pipeline, it is expected that
the pipeline handler guarantees all requests are returned back to the
application before the camera has stopped.
Ensure that this guarantee is met by providing an accessor on the
pipeline handler to validate that all pending requests are removed.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The LIBCAMERA_D_PTR() and LIBCAMERA_O_PTR() macros do not require an
argument, but the version of the macro consumed by Doxygen does.
Fix this by removing the klass parameter from both macros in their
documentation version.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The LIBCAMERA_DECLARE_PRIVATE() macro, used by the library classes
that inherit from libcamera::Extensible in order to implement the
PIMPL pattern, expands to:
public: \
class Private; \
friend class Private;
The 'klass' argument is not used and it might confuse developers as
it might hint that the class that defines the pattern's implementation
can be freely named, while it is actually hardcoded to 'Private'.
Drop the argument from the macro definition.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hanlin Chen <hanlinchen@google.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
s/embedded/bayer/
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ipa_->init() method can fail if the IPA can't load correctly.
This should be caught by the pipeline handler to prevent continuing
with an invalid IPA.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraSensor class is noisy enough in reporting the missing
sensor driver features.
Demote an error message about defaulting the active sensor area when
retrieving the camera sensor info to a warning.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the __FILE__ and __LINE__ values passed to the _log() function
with default parameters, taking their values from the __builtin_FILE()
and __builtin_LINE() functions. This moves handling of the file and line
from the preprocessor to the compiler, which is generally preferred as
it increases type safety.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The _log() functions, as well as the LogMessage constructor, exist in
two versions, one that takes a log category, and one that doesn't. The
latter uses the default log category. This can be simplified by passing
a LogCategory pointer to _log(), which can then be null for the default
category, and moving the retrieval of the default log category from the
LogMessage constructor to the _log() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There's no CameraConfiguration::valid(), the correct function is
CameraConfiguration::validate().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
|
|
Previously when a frame got cancelled, the frameInfo flags
metadataProcessed and paramDequeued wouldn't get set, meaning that the
request wasn't able to be completed and cancelled.
Make sure that these flags are set when the frame gets cancelled so that
the request can be cancelled.
This issue happened while running lc-compliance.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
frameInfo
Assert that there are no queued requests before clearing the frameInfo,
otherwise a SEGFAULT can occur.
This issue happened while running lc-compliance.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA should be stopped before stopping the streams in order to avoid
a "No BufferCache available to queue" issue.
This issue happened while running lc-compliance.
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When seting up the pipeline, the latest entity in the queue is
taken but the oldest one is poped. This is a mistake. Fix it.
Fixes: 4671911df040 ("pipeline: simple: Use breadth-first search to setup media pipeline")
Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The documentation for requestSequence_ was not added when the sequence
number was implemented.
Provide it.
Fixes: d874b3e34173 ("libcamera: request: Provide a sequence number")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation for the ProxyState and tracking variable was not added
when the IPA was extended with a state machine.
Add it.
Fixes: 70238ceca5b2 ("utils: ipc: proxy: Track IPA with a state machine")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fixes: e9b47217b44c ("libcamera: camera_manager: Introduce signals when a camera is added or removed")
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/This method enter/This method enters/
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Android Camera HAL 3 API used in ChromeOS has a ChromeOS own
extension, for example, crop_rotate_scale_degrees in
camera3_stream. As those extensions are not available on Android
platforms, introduce a OS_CHROMEOS macro that can be used to
compile CrOS-specific code conditionally. The macro is defined
if and only if android_platform is 'cros'.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
