| Age | Commit message (Collapse) | Author |
|---|
|
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1)
that uses queueRequest() to pass in the request controls to
IPA.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Queuing of request (i.e. passing of controls to the IPA)
and filling of the parameters buffer are two separate operations.
Treat them as such by splitting them into two functions in
the rkisp1 IPA interface.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The original use of RPi::Stream::reset() was to clear the external flag state
and free/clear out the framebuffers for the stream. However, the latter is now
done through PipelineHandlerRPi::configure(). Rework
PipelineHandlerRPi::configure() to call RPi::Stream::setExternal() instead of
RPi::Stream::reset() to achieve the same thing.
Repurpose RPi::Stream::reset() to instead reset the state of the buffer handling
logic, where all internally allocated buffers are put back into the queue of
available buffers. As such, rename the function to RPi::Stream::resetbuffers().
This resetbuffers() is now called from PipelineHandlerRPi::start(), allowing the
pipeline handler to correctly deal with start()/stop()/start() sequences and
reusing the buffers allocated on the first start().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently, all framebuffer allocations get freed and cleared on a stop in
PipelineHandlerRPi::stopDevice(). If PipelineHandlerRPi::start() is then called
without an intermediate PipelineHandlerRPi::configure(), it will re-allocate and
prepare all the buffers again, which is unnecessary.
Fix this by not freeing the buffer in PipelineHandlerRPi::stopDevice(), but
insted doing it in PipelineHandlerRPi::configure(), as the buffers might have
to be resized.
Add a flag to indicate that buffer allocations need to be done on the next
call to PipelineHandlerRPi::start().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This function used to clear the camera buffers does not belong in the
PipelineHandlerRPi class as it only access members of the RPiCameraData,
so move it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2DeviceFormat structure for the ISP Output 1 node was a copy of what is
used ISP Output 0 node, but with the size changed. However, the plane size and
stride values were not updated. So there is a possibility that the buffer might
be over-sized for the requested resolution.
Fix this by only copying the relevant fields from the ISP Output 0
V4L2DeviceFormat structure, and let the device driver size the planes as needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The RkISP1Path::generateConfiguration() function limits the maximum
resolution to the sensor resolution, to avoid upscaling. It however
doesn't take the sensor aspect ratio into account, which leads to a
maximum (and default) resolution of 1920x1920 when using the self path
with a sensor that has a higher resolution.
Fix it by constraining the minimum and maximum resolutions to match the
sensor's aspect ratio.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPARkISP1Interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of operations to dedicated functions:
ActionV4L2Set => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadata => metdataReady
EventSignalStatBuffer => processStatsBuffer()
EventQueueRequest => queueRequest()
The lexical of IPARkISP1::metadataReady() will now conflict with the
metadataReady Signal being introduced in this patch as part of the
interface change. Hence, rename IPARkISP1::metadataReady() to
IPARkISP1::prepareReady() to prevent the conflict.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When configuring the pipeline we want to share the controls for any
VCM device against the sensor too - pass them to the lensControls
member of configInfo
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraLens class implements a function named "setFocusPostion".
There is a typo here, fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We must calculate the initial scaler crop when the camera is
configured, otherwise the metadata will report this rectangle as being
all zeroes.
Because the calculation is identical to that performed later in handling
the scaler crop control, we factor it into a small helper function,
RPiCameraData::scaleIspCrop.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Simplify the image and embedded buffer matching logic by removing the assumption
that we require a buffer match between the two streams. Instead, if an image
buffer does not match with an embedded data buffer, simply use the ControlList
provided by DelayedControls for the sensor parameters.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If Stream::returnBuffer() gets passed an internally allocated buffer, it now
simply re-queues it back to the device. With this change, the pipeline handler
code can be simplified slightly as it does not need multiple code paths for
internally allocated and non-internally allocated buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
external
Remove the code that marks the Embedded Data stream as external with the Unicam
Image (RAW) stream. This was needed for legacy reasons when matching image and
embedded buffers, but is not needed any more.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ISP input stream currently only allocates a single slot in the
V4L2VideoDevice cache as it follows the number of buffers allocated for use.
However, this is wrong as the ISP input stream imports buffers from Unicam
image stream. As a consequence of this, only one cache slot was used during
runtime for the ISP input stream, and if multiple buffers were to be queued
simultaneously, the queue operation would return a failure.
Fix this by passing the same number of RAW buffers available from the Unicam
image stream. Additionally, double this count in the cases where buffers could
be allocated externally from the application.
Bug: https://github.com/raspberrypi/libcamera-apps/issues/236
Bug: https://github.com/raspberrypi/libcamera-apps/issues/238
Bug: https://github.com/raspberrypi/libcamera-apps/issues/240
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a typo in a logging message.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamerasrc gstreamer component does seem to not allow stream resolutions
that are not advertised by PipelineHandler::generateConfiguration(). This has
been raised in a bug report [1].
Fix this behavior by advertising a SizeRange from the minimum ISP resolution, up
to the sensor resolution from PipelineHandlerRPi::generateConfiguration().
[1] https://bugs.libcamera.org/show_bug.cgi?id=105
Fixes: f16acb275c85 ("pipeline: raspberrypi: Restrict the advertised maximum ISP output resolution")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the sensor is defined to list mbus codes using its native
(untransformed) Bayer order, the method of obtaining it can be
simplified. We don't have to try and reset the flips, we just use the
value directly from the sensor.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Switch the "no buffers available" log message from Info to Debug so that it does
not get output by default.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the sensor exposes the V4L2_CID_NOTIFY_GAINS control, assume it
means the sensor wants to be told the latest colour gains.
We store whether the control exists and if so its default value, to
save us checking for it on every frame.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change will allow the pipeline handler to enumerate and control Video
Mux or Bridge devices that may be attached between sensors and a particular
Unicam instance. Cascaded mux or bridge devices are also handled.
A new member function RPiCameraData::enumerateVideoDevices(), called from
PipelineHandlerRPi::registerCamera(), is used to identify and open all mux and
bridge subdevices present in the sensor -> Unicam link.
Relevant links are enabled/disabled and pad formats correctly set in
PipelineHandlerRPi::configure() before the camera is started.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Enumerate the sensor device entities in PipelineHandlerRPi::match() and loop
over PipelineHandlerRPi::registerCamera() for each sensor found. This will
allow the pipeline handler to register multiple cameras attached to a single
Unicam instance with a Video Mux device.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Entity::link member has an ambiguous name. Rename it to sourceLink
to clarify that it stores the link on the source pad.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Raspberry Pi pipeline handler now sets color spaces correctly.
In generateConfiguration() it sets them to reasonable default values
based on the stream role.
validate() now calls validateColorSpaces() to ensure that the
requested color spaces are sensible, before proceeding to check what
the hardware can deliver.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds a ColorSpace field to the V4L2SubdeviceFormat so that we can
set and request particular color spaces from V4L2.
This commit simply adds the field and fixes some occurrences of brace
initializers that would otherwise be broken. A subsequent commit will
pass and retrieve the value correctly to/from V4l2 itself.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since a queue of waiting Requests has been introduced, not all Requests
queued to the PipelineHandler are immediately queued to the device.
As a Camera can be stopped at any time, it is required to complete the
waiting requests after the ones queued to the device had been completed.
Introduce a pure virtual PipelineHandler::stopDevice() function to be
implemented by pipeline handlers and make the PipelineHandler::stop()
function call it before completing pending requests.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Limit the advertised ISP output sizes available to the sensor resolution in
PipelineHandlerRPi::generateConfiguration(). The user is free to configure a
larger resolution than this, and this will work. However, this stops strange
behavior in applications that use the V4L2 compatability layer to run, and
request the largest possible advertised resolution, which is much larger than
the sensor resolution.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Demote a couple of lines of logging to Debug level to reduce the verbosity of
the log output during startup.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the new utils::abs_diff() function where appropriate to replace
manual implementations.
While at it fix a header ordering issue in
src/libcamera/pipeline/raspberrypi/raspberrypi.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Return the available sensor PixelFormats and sizes from generateConfiguration()
if the StreamRole is set to StreamRole::Raw. The existing code returns the
PixelFormats and sizes for all other StreamRole types.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This introduces a way to set controls immediately for a capture
in ipu3 pipeline handler. It enables to apply a test pattern mode
per frame.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraSensor stores TestPatternModes as an int32_t. This prevents
the compiler from verifying the usage against the defined enum types.
Fix references to the TestPatternMode to store the value as the
TestPatternModeEnum type which is defined by the control generator.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
If there is no lens detected by the system, then we will not be able to
set the control, so we can skip processing of the list.
Furthermore, if the IPA has not set a V4L2_CID_FOCUS_ABSOLUTE control,
then a warning will be printed as the lensControls.get() will not
succeed.
Break out of the control parsing when there is no CameraLens
device, or if there is no absolute focus control set by the IPA.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For consistency with UniqueFD, rename the fd() function to get().
Renaming UniqueFD::get() to fd() would have been another option, but was
rejected to keep as close as possible to the std::shared_ptr<> and
std::unique_ptr<> APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages a file descriptor owned by DmaHeaps for a dma handle by
UniqueFD. Furthermore, DmaHeaps::alloc() creates a new file
descriptor and the returned file descriptor is owned by a caller.
This also clarifies it by changing the returned value to UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The FileDescriptor class is a generic helper that matches the criteria
for the base library. Move it there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow IPA to apply controls to the lens device.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a raw stream is specified, the bit depth and packing requested
should influence our choice of camera mode to match (if possible).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The code was reducing the number of raw stream buffers allocated when
the application is providing some of its own. However, it was not
taking account of the fact that the application cannot supply embedded
data buffers, so it must always allocate a reasonable minimum number
of these buffers (possibly more than the number of raw stream buffers)
to prevent frame drops.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The pipeline handler populates a new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the IPA is initialized, it will need to know the sensor model
used in order to properly call CameraSensorHelper for the analogue gain.
Modify the init definition in the pipeline handler and in the IPA as
well as the mojo interface to pass the IPASettings.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When acquiring the media device, it is not necessary to match all entity names,
so remove it. Aditionally, we do not need to keep the MediaEntity pointers for
the Unicam and ISP devices stored within the PipelineHandlerRPi class. Instead
these can be stored locally in PipelineHandlerRPi::match().
PipelineHandlerRPi::registerCamera() now returns an int error code instead of a
boolean for pass/fail.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Split out PipelineHandlerRPi::match() so that media device enumeration and
acquisition is separated from camera registration. The former logic remains
in PipelineHandlerRPi::match(), whereas the latter logic is moved into a new
PipelineHandlerRPi::registerCamera() member function.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
PixelFormatInfo::info() would log a warning message if the PixelFormat was
invalid when called from the isRaw() function. Add a validity test in isRaw()
to avoid this warning message.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a stream is marked as external, double the number of V4L2BufferCache slots
that are allocated. This is to account for additional buffers that may be
allocated directly by the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For simplicity, the pipeline handler currently look at the maximum number of
buffers set in the StreamConfiguration by the user and allocate the same number
of internal buffers for all device nodes. This would likely overallocate buffers
for some nodes. Rework this logic to try and minimise overallcations without
compromising performance.
The key change is to mostly decouple the number of internal buffers allocated
from number of buffers requested by the user through the StreamConfiguration.
For ISP nodes, we only ever need 1 set of internal buffers, as the hardware runs
synchronous with the requests and IPA.
For Unicam nodes, allocate a minimum for 4 buffers (exported + internal), but
also require at least 2 internal buffers to minimise frame drops.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This function does not modify the pixFmt parameter, so use a const qualifier.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have the exposure time calculated, report it in the
controls::ExposureTime and don't use the pipeline handler for it
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
