Age | Commit message (Collapse) | Author |
|
Rename the IPA interface namespace to ipa::RPi for consistency with
the libcamera::RPi namespace label.
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit addresses a couple of tidy-ups after the IPAInterface
rework:
- Rename ConfigStaggeredWrite -> ConfigSensorParams
- Rename setIsp -> setIspControls
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the recent IPAInterface changes, the signal handlers
statsMetadataComplete(), runISP() and embeddedComplete() would run
unconditionally when called. They should only run when state != Stopped.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Fixes: e201cb4f5450 ("libcamera: IPAInterface: Replace C API with the new C++-only API")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove everything related to the C API, including ipa_context,
ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant
documentation.
ipaCreate() provided by IPA implementations, and createInterface()
provided by IPAModule (wrapper around IPA implementation) both now
return a C++ object IPAInterface instead of struct ipa_context.
Although IPAInterfaceWrapper is the only component of libipa, the
skeleton and build files for libipa are retained.
After converting the C API to the C++-only API, make all pipeline
handlers and IPAs use the new API.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
This is a combination of 21 commits:
---
libcamera: IPAModule: Replace ipa_context with IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate_() and createInterface()
return IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: ipa_context_wrapper: Remove ipa_context_wrapper
Since ipa_context has been replaced with custom IPAInterfaces, it is not
longer needed. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: remove ipa_context and functions from documentation
Remove all the documentation related to ipa_context and the C IPA API,
as well as the documentation about the functions in the IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAInterface: Remove all functions from IPAInterface
Now that all the functions in the IPA interface are defined in the data
definition file and a specialized IPAInterface is generated per pipeline
handler, remove all the functions from the base IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: make ipaCreate return IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate return IPAinterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
ipa: remove IPAInterfaceWrapper
As every pipeline has its own proxy, IPAInterfaceWrapper is no
longer necessary. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
libcamera: IPAProxy: Remove stop() override
Since stop() is part of the IPA interface, and the IPA interface is now
generated based on the data definition file per pipeline, this no longer
needs to be overrided by the base IPAProxy. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme
IPAProxy is changed in two major ways:
- Every pipeline has its own proxy, to support each pipeline's IPA
interface
- IPAProxy implementations always encapsulate IPA modules, and switch
internally for isolation or threaded
The IPAProxy registration mechanism is removed, as each pipeline will
have its own proxy, so the pipeline can pass the specialized class name
of the IPAProxy to the IPAManager for construction.
IPAManager is changed accordingly to support these changes:
- createIPA is a template function that takes an IPAProxy class, and
always returns an IPAProxy
- IPAManager no longer decides on isolation, and simply creates an
IPAProxy instance while passing the isolation flag
Consequently, the old IPAProxy classes (IPAProxyThread and
IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use
the new IPAManager interface, and to construct a ProcessManager as no
single global instance is created anymore.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
---
libcamera: IPAProxy: Add isolate parameter to create()
Since IPAProxy implementations now always encapsulate IPA modules, add a
parameter to create() to signal if the proxy should isolate the IPA or not.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline
Now that each pipeline handler has its own IPAProxy implementation, make
the IPAManager fetch the IPAProxy based on the pipeline handler name.
Also, since the IPAProxy is used regardless of isolation or no
isolation, remove the isolation check from the proxy selection.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAManager: add isolation flag to proxy creation
When the IPA proxy is created, it needs to know whether to isolate or
not. Feed the flag at creation of the IPA proxy.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Make createIPA return proxy directly
Since every pipeline knows the type of the proxy that it needs, and
since all IPAs are to be wrapped in a proxy, IPAManager no longer needs
to search in the factory list to fetch the proxy factory to construct a
factory. Instead, we define createIPA as a template function, and the
pipeline handler can declare the proxy type when it calls createIPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy: Remove registration mechanism
Implementations of IPA proxies use a registration mechanism to register
themselves with the main IPA proxy factory. This registration declares
static objects, causing a risk of things being constructed before the
proper libcamera facilities are ready. Since each pipeline handler has
its own IPA proxy and knows the type, it isn't necessary to have a proxy
factory. Remove it to alleviate the risk of early construction.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread
We have now changed the proxy from per-IPC mechanism to per-pipeline.
The per-IPC mechanism proxies are thus no longer needed; remove them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
tests: ipa_interface_test: Update to use new createIPA
Update the IPA interface test to use the new createIPA function from
IPAManager. Also create an instance of ProcessManager, as no single
global instance is created automatically anymore. Update meson.build to
to depend on the generated IPA interface headers.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: PipelineHandler: Remove IPA from base class
Since pipeline handlers now have their own IPA interface types, it can no
longer be defined in the base class, and each pipeline handler
implementation must declare it and its type themselves. Remove it from
the base class.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
ipa: raspberrypi: Add mojom data definition file
Add a mojom data definition for raspberrypi pipeline handler's IPAs.
This simplifies the API between the raspberrypi pipeline handler and the
IPA, and is not a direct translation of what was used before with
IPAOperationData.
Also move the enums from raspberrypi.h to raspberrypi.mojom
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: raspberrypi: Use new data definition
Now that we can generate custom functions and data structures with mojo,
switch the raspberrypi pipeline handler and IPA to use the custom data
structures as defined in the mojom data definition file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: vimc: Support the new IPC mechanism
Add support to vimc pipeline handler and IPA for the new IPC mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
---
libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism
Add support to the rkisp1 pipeline handler and IPA for the new IPC
mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism
Add support to ipu3 pipeline handler and IPA for the new IPC mechanism.
[Original version]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Fixed commit message and small changes]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for fast colour denoise, set the low resolution ISP
output stream (Output1) to a 1/4 resolution of the application requested
stream (Output0). This only happens if the application has not requested
an additional YUV or RGB stream.
We also constrain this 1/4 resolution to at most 1200 pixels in the
largest dimension to avoid being too taxing on memory usage and system
bandwidth.
Also switch the default StreamRole::VideoRecording to YUV420 to allow
fast colour denoise to run.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor the high/low resolution stream format and output selection
routine. This change is in preparation of adding 1/4 resolution output
for fast colour denoise.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPA_RESULT_SENSOR_PARAMS
Fixup logic when handling IPA_RESULT_SENSOR_PARAMS where we must always
overwrite the parameters if provided by IPA. In the current codebase,
this only happens once on startup, so there is no effective functional
difference. But this change allows the option for the IPA to request new
sensor parameters per-mode if required.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the enum values to indicate pipeline handler -> IPA actions
(IPA_CONFIG_*) and IPA -> pipeline handler return results (IPA_RESULT_*).
Additionally, provide more descriptive names for these values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a static member function to get the corresponding BayerFormat from a
given V4L2PixelFormat. The motivation behind this patch is to align the
overall structure of the BayerFormat class with other parts of the code
base, such as the V4L2PixelFormat class.
The downside of this change is a slightly worse time complexity, but
the upside is a smaller codebase and lower memory consumption. As the
function is probably not used very frequently, I tend to favor the
mentioned upsides.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the libcamera core helper DelayedControls instead of the local
StaggeredCtrl. The new helper is modeled after the StaggeredCtrl
implementation and behaves the same.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for setting V4L2_CID_VBLANK appropriately when setting
V4L2_CID_EXPOSURE. This will allow adaptive framerates during
viewfinder use cases (e.g. when the exposure time goes above 33ms, we
can reduce the framerate to lower than 30fps).
The minimum and maximum frame durations are provided via libcamera
controls, and will prioritise exposure time limits over any AGC request.
V4L2_CID_VBLANK is controlled through the staggered writer, just like
the exposure and gain controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no need to pass the Camera pointer to queueRequest(),
completeBuffer() and completeRequest() as the Request also passed
contains the same information. Remove the Camera argument to avoid
situations where the information in the Request and the argument differ.
There is no functional change and no public API change as the interface
is only used between the Camera and PipelineHandler.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraSensor instance stored in RPiCameraData::sensor_ is allocated
dynamically and never deleted. Fix the memory leak by storing it in a
std::unique_ptr<>.
Fixes: 740fd1b62f67 ("libcamera: pipeline: Raspberry Pi pipeline handler")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
configure
The number of frames to drop (not display) is passed back now from the
start method, not configure. This means applications have a chance to
set fixed exposure/gain before starting the camera and this can affect
the frame drop count that is returned.
Note how we need to be able to tell the very first time we start the
camera from subsequent restarts, hence addition of the "firstStart_"
flag.
Both the IPA implementation file and the pipeline handler need
matching modifications.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Camera::start
The ScalerCrop control is handled by the pipeline handler, not the
IPA, so must be handled explicitly in the Camera::start method. The
ScalerCrop code used when processing requests has been factored out to
make it easy to reuse.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Forward any controls passed into the pipeline handler to the IPA.
The IPA then sets up the Raspberry Pi controller with these settings
appropriately, and passes back any V4L2 sensor controls that need
to be applied.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change allows controls passed into PipelineHandler::start to be
forwarded onto IPAInterface::start(). We also add a return channel if the
pipeline handler must action any of these controls, e.g. setting the
analogue gain or shutter speed in the sensor device.
The IPA interface wrapper isn't addressed as it will soon be replaced by
a new mechanism to handle IPC.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Applications now have the ability to pass in controls that need to be
applied on startup, rather than doing it through Request where there might
be some frames of delay in getting the controls applied.
This commit adds the ability to pass in a set of libcamera controls into
the pipeline handlers through the pipeline_handler::start() method. These
controls are provided by the application through the camera::start()
public API.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the IPA fails during configuration, return an error flag to the
pipeline handler and fail the use case gracefully.
At present, the IPA configuration can fail for the following reasons:
- The sensor is not recognised, and fails to open a CamHelper object.
- The pipeline handler did not pass in controls for the ISP and sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the recent change in the bayer/embedded buffer matching code,
a condition would make the bayer buffer be requeued back to the device,
even though it could potentially be queued for matching. This would
cause unnecessary frame drops as sync would be lost.
The fix is to ensure the bayer buffer only gets requeued if the embedded
data buffer queue is not empty, i.e. the buffer truly is orphaned.
Additionally, we do this test before deciding to flush any of the two
queues of all their buffers.
Fixes: 909882b (pipeline: raspberrypi: Rework bayer/embedded data buffer matching)
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is a condition that would cause the buffers to never be in sync
when we using only a single buffer in the bayer and embedded data streams.
This occurred because even though both streams would get flushed to resync,
one stream's only buffer was already queued in the device, and would end
up never matching.
Rework the buffer matching logic by combining updateQueue() and
tryFlushQueue() into a single function findMatchingBuffers(). This would
allow us to flush the queues at the same time as we match buffers, avoiding
the the above condition.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a MappedFrameBuffer to mmap embedded data buffers for the pipeline
handler to use in the cases where the sensor does not fill it in. This
avoids the need to mmap and unmap on every frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2DeviceFormat class now has default initializers for all members,
explicit initialization isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The method calls setFormat(), stores the return value, but then does not
do anything with the return value. I presume it is meant to fail and
return the error.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
During configure() we update the ScalerCropMaximum to the correct
value for this camera mode and work out the minimum crop size allowed
by the ISP.
Whenever a new ScalerCrop request is received we check it's valid and
apply it to the ISP V4L2 device. When the IPA returns its metadata to
us we add the ScalerCrop information, rescaled to sensor native
pixels.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Initialise it to show we support its use, however, set it to all
zeroes to indicate that it's not meaningful yet.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove variable shadowing within the pipeline handler implementations.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DEFINE_CATEGORY,
LOG_DECLARE_CATEGORY and REGISTER_PIPELINE_HANDLER are
unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the recent change to use C++17, the following code changes can be
made:
- Use C++17 [[fallthough]] attribute instead of /* Fall through */.
- Swap boost::any to std::any.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The code in pipeline_handler::start() that applies the flips were in a
block that was conditional on the RPi::IPA_CONFIG_STAGGERED_WRITE return
result. This should be applied unconditionally.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the buffer copy removed from all pipelines for raw capture
rename StillCaptureRaw to Raw to better describe the role.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Change variable names to camel case to be consistent with the rest of
the source files. Remove #define consts and replace with constexpr.
Add some newlines to make the code more readable.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts resolved]
[Kieran: Fix checkstyle line under 80 chars]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All IPA related types/params are now moved to the RPi namespace.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts fixed]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename RPi::RPiStream -> RPi::Stream and RPi::RPiDevice -> RPi::Device.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit plumbs the user transform from the Raspberry Pi pipeline
handler through to the IPA. Note that the transform is actually
handled in the sensor (by setting the h/v flip bits), so the IPAs need
to understand the orientation of the image they receive.
Once in the IPA we add it to the CameraMode description, so that it
becomes automatically available to all the individual control
algorithms.
The IPA configure method has to be reordered just a little so as to
fill in the transform in the camera mode before calling SwitchMode.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Raspberry Pi pipeline handler allows all transforms except those
involving a transpose. The user transform is combined with any
inherent rotation of the camera, and the camera's H and V flip bits
are set accordingly.
Note that the validate() method has to work out what the final Bayer
order of any raw streams will be, before configure() actually applies
the transform to the sensor. We make a note of the "native"
(untransformed) Bayer order when the system starts, so that we can
deduce transformed Bayer orders more easily.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a field to the CameraConfiguration (including the necessary
documentation) to represent a 2D transform requested by the
application. All pipeline handlers are amended to coerce this to the
Identity, marking the configuration as "adjusted" if something
different had been requested.
Pipeline handlers that support Transforms can be amended subsequently.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
before configure()"
This reverts commit 1e8c91b65695449c5246d17ba7dc439c8058b781.
Now that we shall be implementing application-defined 2D transforms
it's no longer possible to set the sensor orientation so early on. We
have to wait until we have the CameraConfiguration object as that's
where the application puts its choice of transform.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the case where a FrameBuffer that has been externally allocated
(i.e. not through the v4l2 video device) is passed into a Request.
We must store the buffer pointer in the stream internal buffer list to
identify when used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
By using a set container, we can easily insert/remove buffer ids that have
been mmaped by the IPA. This will be required to track buffers allocated
externally and passed to the pipeline handler through a Request.
Move the IPA buffer mapping code into a function to remove duplicated
code.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
By using a map container, we can easily insert/remove buffers from the
buffer list. This will be required to track buffers allocated externally
and passed to the pipeline handler through a Request.
Replace the buffer index tracking with an id generated internally by the
stream object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The FrameBuffer cookie may be set by the application, so this cannot
be set by the pipeline handler as well. Revert to using a simple index
into the buffer list to identify buffers passing to and from the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The counter was not incremented, so multiple streams would only pass the
last stream config to the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Stop using v4l2_videodevice::allocateBuffer() for internal buffers and
instead export/import all buffers. This allows the pipeline to return
any stream buffer requested by the application as zero-copy.
Advertise the Unicam Image stream as the RAW capture stream now.
The RPiStream object now maintains a new list of buffers that are
available to queue into a device. This is needed to distinguish between
FrameBuffers allocated for internal use vs externally provided buffers.
When a Request comes in, if a buffer is not provided for an exported
stream, we re-use a buffer from this list.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
For the zero-copy RAW capture feature, the RPiStream will have to be
modified. Remove the const qualifier in anticipation of the future
commits for this feature.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Increase the number of expected RAW buffers in the stream configuration
to 2. This will avoid dropping Unicam frames when exporting RAW streams.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
No functional changes, only added some more trace points.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA now signals up front how many frames it wants the pipeline
handler to drop. This makes it easier to handle up-coming changes to the
buffer handling for import/export buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Put RPiStream into the RPi namespace and add a new log category (RPISTREAM).
Reorder methods into logical groups for readability.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|