Age | Commit message (Collapse) | Author |
|
The end semicolons with LOG_DEFINE_CATEGORY,
LOG_DECLARE_CATEGORY and REGISTER_PIPELINE_HANDLER are
unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the buffer copy removed from all pipelines for raw capture
rename StillCaptureRaw to Raw to better describe the role.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Be more precise in commenting why the ImgU shall not be configured
if only the RAW stream is requested.
As an example, if the ImgU gets unecessary configured:
cam -srole=viewfinder -c2 -C -> WORKS
cam -srole=stillraw -c2 -C -> WORKS
cam -srole=viewfinder -c2 -C -> Failed to queue buffer 0: Invalid argument
Since commit ("libcamera: ipu3: Fix RAW+YUV capture") the ImgU
configuration procedure also correctly implements the assumption that at
least one of the YUV output is being operated. If that's not the case,
as in the RAW-only capture use case, the code tries to access a
non-existing configuration. One more reason to exit early if no YUV
stream is requested.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Since the re-implementation of the IPU3 pipeline handler
configuration procedure, the main output is always assigned in
case any YUV stream is requested.
Remove a dead code block that checks for the main output to be
valid.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When requesting one RAW stream and one YUV stream the
StreamConfiguration assigned to the RAW stream is the first one
added to the CameraConfiguration, while the YUV stream gets assigned to
the main output.
At configure() time the viewfinder output needs to be configured with
the same format as the main output, but since the introduction of RAW
capture support, the pipeline has not been updated and still assumes
the main output configuration is the first one in the
CameraConfiguration. This causes the viewfinder to be configured
with the same format as the raw stream, breaking capture operations.
Before this commit the following command fails and the ImgU does not
produce frames:
cam -srole=stillraw -srole=viewfinder -c2 -C
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a field to the CameraConfiguration (including the necessary
documentation) to represent a 2D transform requested by the
application. All pipeline handlers are amended to coerce this to the
Identity, marking the configuration as "adjusted" if something
different had been requested.
Pipeline handlers that support Transforms can be amended subsequently.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When calculating the pipeline configuration for the IPU3 platform,
libcamera tries to be smart and select the smallest sensor frame
resolution large enough to accommodate the stream sizes
requested by the application.
While this makes a lot of sense, in practice optimizing the
selected sensor resolution makes the pipeline configuration calculation
process fail in multiple occasions, or results in stalls during capture.
As a trivial example, capturing with cam with the following command
line results in a stall:
$ cam -swidth=1280,height=720 -swidth=640,height=480 -c1 -C
Likewise, the Android HAL supported format enumeration fails in
reporting smaller resolutions as supported when used with the OV5670
sensor.
320x240:
DEBUG IPU3 ipu3.cpp:192 CIO2 configuration: 648x486-SGRBG10_IPU3
ERROR IPU3 imgu.cpp:408 Failed to calculate pipe configuration
ERROR IPU3 ipu3.cpp:299 Failed to calculate pipe configuration: unsupported resolutions.
640x480:
DEBUG IPU3 ipu3.cpp:192 CIO2 configuration: 320x240-SGRBG10_IPU3
ERROR IPU3 imgu.cpp:408 Failed to calculate pipe configuration
ERROR IPU3 ipu3.cpp:299 Failed to calculate pipe configuration: unsupported resolutions.
Furthermore the reference xml files used for the IPU3 camera
configuration on the ChromeOS platform restricts the number of sensor
resolution to be used for the OV5670 sensor to 2 from the 6 supported by
the driver [1].
The selection criteria of the correct CIO2 mode are not specified, and
for the time being, as a workaround, always use the sensor maximum
resolution at the expense of frame rate and bus bandwidth to allow the
pipeline to successfully support smaller modes for the OV5670 sensor and
solve pipeline stalls when capturing with both sensors.
[1] See the <sensor_modes> enumeration in:
https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+/master/baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/gcss/graph_settings_ov5670.xml
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that libcamera is using C++17 and requires gcc 7 or newer, we can
use the implicit std::queue constructor. Simplify the code accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that libcamera uses C++17, the C++ standard library provides
std::clamp(). Drop our custom utils::clamp() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit 15df621fb9a7 ("libcamera: ipu3: Configure ImgU with the computed
parameters") added an empty "imgu." file by mistake. Remove it.
Fixes: 15df621fb9a7 ("libcamera: ipu3: Configure ImgU with the computed parameters")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Stream pointer just acts as a key in the Request object. There is no
good use-case to modify a stream from a pointer retrieved from the
Request, make it const. This allows pipeline handlers to better express
that the Stream pointer is retrieved in a Request should just be treated
as a key.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename Camera::name() to camera::id() to better describe what it
represents, a unique and stable ID for the camera. While at it improve
the documentation for the camera ID to describe it needs to be stable
for a camera between resets of the system.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the CameraSensor ID as the camera name in pipelines that uses a
CameraSensors, this is done in preparation of turning the camera name
into an ID. The CameraSensor ID meets the requirements that will be put
on camera ID.
Before this change example of camera names:
* OF based systems
ov5695 7-0036
ov2685 7-003c
* ACPI based systems
ov13858 8-0010
ov5670 10-0036
* VIMC
VIMC Sensor B
After this change the same cameras are:
* OF based systems
/base/i2c@ff160000/camera@36
/base/i2c@ff160000/camera@36
* ACPI based systems
\_SB_.PCI0.I2C2.CAM0
\_SB_.PCI0.I2C4.CAM1
* VIMC
platform/vimc.0 Sensor B
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
GCC5 does not provide prototypes for the math library functions defined
in the math.h header for the std:: namespace.
Include the C++ <cmath> header in place of <math.h> as it defines
overloads for the std::abs and std::fmod function.
This goes intentionally against the libcamera coding guidelines, and
is reported as warning by checkpatch.py.
Fixes: 968ab9bad0ed ("libcamera: ipu3: imgu: Calculate ImgU pipe configuration")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ImgUDevice::configureInput() function does not only configure the
input format but applies rectangles to the IF, BDS and GDC components.
Rename it to ImgUDevice::configure().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instrument the ImgUDevice::configureInput() function to use the provided
pipe configuration parameters to configure the IF, BDS and GDC
rectangles.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Collect the desired ImgU pipe configuration while assigning
streams in the pipeline handler validate() function and ask the
ImgUDevice class to calculate the pipe configuration parameters.
If the requested pipe configuration results in a non-valid
configuration, return an error from the validate() function.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instrument the ImgU component to dynamically calculate the image
manipulation pipeline intermediate sizes.
To correctly configure the ImgU it is necessary to program the IF, BDS
and GDC sizes, which are currently fixed to the input frame size.
The procedure used to calculate the intermediate sizes has been ported
from the pipe_config.py python script, available at:
https://github.com/intel/intel-ipu3-pipecfg
at revision:
61e83f2f7606 ("Add more information into README")
Define two structures (ImgUDevice::Pipe and ImgUDevice::PipeConfig)
to allow the pipeline handler to supply and retrieve configuration
parameters from the ImgU.
Finally, add a new operation to the ImgUDevice that calculates
the pipe configuration parameters based on the requested input and
output sizes.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3CameraConfiguration::camera_ shared pointer is not used.
Remove it.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3CameraConfiguration::streams_ field was used to keep an
association between the StreamConfiguration and the assigned streams
before CameraConfiguration::setStream() was called at configure() time.
The stream assignment was based on the order in which elements were
inserted in the vector, implementing a fragile association between
streams and their intended configurations.
As it is now possible to assign streams at validation time, there is no
need to keep that association in place, and the streams_ vector is now
unused.
Remove it and the associated accessor method from the
IPU3CameraConfiguration class.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Remove the adjustStream() and assignStream() methods, and perform stream
adjustment and assignment while iterating the StreamConfiguration
items.
The adjustStream() implementation had some arbitrary assumption, like
the main output having to be as large as the sensor resolution, and did
not take into account the different alignment requirements between the
main output and the viewfinder output.
The assignStream() implementation also assumes only full-size streams
can be produced by the main output, and having it as a separate function
prevents adjusting streams according to which output they are assigned.
Blend the two implementation in a single loop and perform the required
stream adjustment and assignment in one go.
As streams are now assigned at validate() time, remove the same
operation from the configure() function.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a const version of the CIO2Device::sensor() method, that retrieves
a const pointer to the sensor_ class member, to be called by users
which only own a const reference to a CIO2Device class instance.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3 pipeline handler supports 2 processed RGB/YUV streams
and one RAW stream. Validate that the requested stream combination is
supported in the pipeline handler validate() implementation and return
an error in case it's not.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Size struct constructor defaults the width and height to 0.
Remove the empty braced-list initialization as it is not required.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report StreamFormats associated to each StreamConfiguration generated
by the IPU3 pipeline handler.
The StreamFormats are generated differently for RAW and processed
streams, with the former using the sensor enumerated resolutions and
the latter using a continuous range of sizes constructed by matching the
sensor capabilities with the platform constraints.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The validate function overwrites the generated StreamConfiguration with
the one reported by the CIO2 unit when inspecting the RAW stream
configuration.
As we prepare to add StreamFormats to the IPU3 StreamConfiguration,
assigning to the CIO2 generated configuration would delete the
StreamFormats.
Fix this by updating relevant fields only in order to keep the
assigned StreamFormats.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add two methods to the CIO2Device class to retrieve all the supported
PixelFormats and sizes.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Inspect the return status of validate() in the IPU3 pipeline handler
generateConfigurtion() implementation. If the generated configuration is
not valid, return a an empty configuration to the application.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Remove stream assignment from the IPU3 pipeline handler
generateConfiguration() implementation.
The function aims to provide a suitable default for the requested use
cases. Defer stream assignment to validation and only initialize sizes
and formats.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The mbusCodesToInfo map actually maps media bus codes to PixelFormat
instances. Rename the map according to its actual function and while at
it drop the 'static' keyword as the map is already defined in an
anonymous namespace.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
SizeRange is defined as a class while Size and Rectangle are defined as
struct. This is confusing for users in forward declarations. Simplify it
by turning both structures into classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rectangle, unlike Size, has no constructor, requiring the users to
explicitly initialize the instances. This is error-prone, add
constructors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a helper instead of local code to retrieve all keys from a map.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the new Size::isNull() function through the code base to replace
manual checks. While the new code isn't equivalent, as isNull() checks
that both width and height are zero, it catches the same conditions in
practice.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Do not proxy the signal in the CI2Device when there is no need for it,
remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's confusing to read the code and understand that a request is only
completed before being processed by the ImgU if it only contains a
single RAW buffer. Add a boolean variable with a explanatory name to
make this clearer, no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the Size::isNull() helper instead of using local code.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix wrong parameter indent in generateConfiguration() function
implementation.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3 pipeline handler that does not support receiving an empty list
of roles at generateConfiguration() time. This contradicts the camera
API which allows application to generate empty CameraConfiguration to
be later manually filled.
Fix this by returning an empty CameraConfiguration if the list of
requested roles is empty. While at it, align the style with the other
pipeline handlers.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Improve the error message emitted when multiple raw streams are
requested.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of manually deleting the video and subdevices in the destructor
use std::unique_ptr.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The struct ImgUOutput now only contains one member that is in use, the
video device. Remove the struct and use the video device directly
instead.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pipeline specific subclass of the pipeline is empty, remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The active_ flag is only used inside one function, remove the global
flag and handle it inside the single function.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Do not keep the duplicated ImgUDevice::ImgUOutput information in both
the stream and camera data classes. Remove it from the stream and only
access it from the camera data class.
Which stream is which can instead be checked by comparing it to the
known streams in camera data. This match how streams are checked in
other parts of the code making the pipeline more coherent.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the IPU3 pipeline only provided streams to applications that came
from the ImgU it made sense to have a generic function to configure all
the different outputs. With the addition of the RAW stream this begins
to be cumbersome to read and make sense of in the PipelineHandlerIPU3
code. Replace the generic function that takes a specific argument for
which sink to configure with a specific function for each sink.
This makes the code easier to follow as it's always clear which of the
ImgU sinks are being configured without knowing the content of a
generically named variable. It also paves the way for future
improvements.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Mark all variables and functions that are only used internally as
private.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The numerical index of the imgu is only used to create its name in
string form. There is no need to keep it around after that, remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation of refactoring the IPU3 pipeline handler breakout the
ImgUDevice into its own .cpp and .h file, no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|