| Age | Commit message (Collapse) | Author |
|---|
|
The function gauss_seidel2_SOR() makes use of a function scoped iterator
'i', for several loops, and has a precedence of re-using the function
scoped iterator declaration in the majority of cases, except the first
where it is declared in the loop scope before the function scope, and
later which aliases a new declaration.
Re-use the existing iterator variable for consistency, and to prevent
variable aliasing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To be consistent with the other pipeline handlers that don't prefix
their IPA protocol header with ipa_, rename ipa_vimc.h to vimc.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is the unnecessary semicolon after ipaCreate() in
raspberrypi.cpp. This removes it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
~IPAVimc() checks if fd != 0, but it should check if fd != -1.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set span_r and span_b to -1 so that when they are passed to Pwl::Eval()
they won't cause access to uninitialized memory.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
I presume this code is supposed to set bin_x and bin_y, and not bin_y
two times. This caused use of uninitialized variable later when bin_x
was used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the recent change to use C++17, the following code changes can be
made:
- Use C++17 [[fallthough]] attribute instead of /* Fall through */.
- Swap boost::any to std::any.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Change variable names to camel case to be consistent with the rest of
the source files. Remove #define consts and replace with constexpr.
Add some newlines to make the code more readable.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts resolved]
[Kieran: Fix checkstyle line under 80 chars]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All IPA related types/params are now moved to the RPi namespace.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts fixed]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This avoids a namespace clash with the RPi namespace used by the ipa and
pipeline handlers, and cleans up the syntax slightly.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update ALSC (Auto Lens Shading Correction) to handle correctly the
user transform now passed in the camera mode.
The user transform is applied directly in the sensor so the image
statistics already incorporate it, and the adaptive algorithm is
entirely agnostic towards it, so all we have to do is flip the
calibrated tables to match. (These tables will have been calibrated
without the user transform.)
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit plumbs the user transform from the Raspberry Pi pipeline
handler through to the IPA. Note that the transform is actually
handled in the sensor (by setting the h/v flip bits), so the IPAs need
to understand the orientation of the image they receive.
Once in the IPA we add it to the CameraMode description, so that it
becomes automatically available to all the individual control
algorithms.
The IPA configure method has to be reordered just a little so as to
fill in the transform in the camera mode before calling SwitchMode.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Refresh the RkISP1 user-space header to match the latest state in the
media-tree [1]. This requires update of symbol names in the RkISP1 IPA
but there is no functional change.
Unfortunately the upstream header has a few problems that needs to be
fixed before it can be used.
1. The SPDX header does not satisfy the Linux scripts/headers_install.sh
so the installation step have to be done manually (dropping _UAPI
prefix from header include guard). Issue is reported upstream.
2. The BIT() macro is used in the header but unfortunately this macro
is not accessible in user-space headers. Fix this by reverting back
to open code setting the bit without macro. Fix submitted upstream
and acked by maintainer.
1. d7a81a5b07313535 ("media: staging: rkisp1: uapi: remove __packed")
2. [PATCH v2] staging: rkisp1: uapi: Do not use BIT() macro
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Do not depend on other headers to pull in the V4L2 controls header.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Move the GPLv2 utilities used for generating public and private keys to
the utilities subtree.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Handle the case where a FrameBuffer that has been externally allocated
(i.e. not through the v4l2 video device) is passed into a Request.
We must store the buffer pointer in the stream internal buffer list to
identify when used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA now signals up front how many frames it wants the pipeline
handler to drop. This makes it easier to handle up-coming changes to the
buffer handling for import/export buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The standard way in C++17 to specify that a function or function
argument may be unused it to specify the [[maybe_unused]] attribute.
Replace manual void casts to silence compiler warnings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
We build libcamera with -Wno-unused-parameter and this doesn't cause
much issue internally. However, it prevents catching unused parameters
in inline functions defined in public headers. This can lead to
compilation warnings for applications compiled without
-Wno-unused-parameter.
To catch those issues, remove -Wno-unused-parameter and fix all the
related warnings with [[maybe_unused]].
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that libcamera uses C++17, the C++ standard library provides
std::clamp(). Drop our custom utils::clamp() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that we stop the asynchronous thread on a SwitchMode, we would do
better to regenerate all the tables if the new camera mode crops in a
significantly different way to the old one. A few minor tweaks make
sense along with this:
* Reset the lambda values when we reset everything. It wouldn't make
sense to re-start with the old mode's values.
* Use the last recorded colour temperature to generate new tables rather
than any default value.
* Set the frame "phase" counter to ensure the adaptive procedure will
run asap.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
This fixes a bug where the luminance correction table was not being
resampled according to the camera mode, in the same way as the colour
tables. This could be noticeable if any camera modes crop
aggressively.
This resampling can be done "up front" in the SwitchMode, as we have
only a single fixed luminance table. In order to protect the
recalculation of the table from the asynchronous thread (which reads
it) I've elected to wait for that thread to go idle (though I doubt it
would have mattered much). As a by-product of stopping the thread, it
no longer needs its own copy of the camera mode (async_camera_mode_).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix up a few locations where we call notify_one() with the lock
held. In particular, restartAsync does not need to be called with the
lock held for its entire duration.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the libcamera framework, SwitchMode (which overwrites the
camera_mode) cannot run concurrently with Prepare (which uses it).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implements, for the Raspberry Pi platform, the returning of the CCM
(Colour Correction Matrix) used by the pipeline in the libcamera
metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove use of vcsm allocations and replace with dma heap allocations.
The pipeline handler now passes the fd of the allocation over to the IPA
instead of the raw pointer.
Also use libcamera::FileDescriptor for fd lifetime management.
This commit must be built alongside the accompanying BCM2835 ISP kernel
driver changes at https://github.com/raspberrypi/linux/pull/3715.
Otherwise a mismatch will cause undefined behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG
frame action to send the sensor staggered write configuration to the
pipeline handler when the IPA is configured. Replace this ad-hoc
mechanism by passing the corresponding data back from the IPA to the
pipeline handler through the configure() response. This allows
synchronous handling of the response on the pipeline handler side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The IPAInterface::configure() function now accepts custom configuration
data. Use it to pass the lens shading table instead of using a custom
IPA event. This will allow starting the IPA when starting the camera,
instead of pre-starting it early in order to process the lens shading
table allocation event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The camera sensor orientation is now handled by the pipeline handler.
Drop hardcoded per-sensor orientations from the IPA.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Switch FocusStatus::num to unsigned int for convenience.
Fill in libcamera::controls::FocusFoM with the average of the middle two
regions (across a 4x3 grid) FoM statistics from the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For control algorithms like focus, this is needed to return out the
the current frame focus statistics. For other algorithms, there is no
functional change.
Signed-off-By: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previously, output of the focus measure could not be enabled without
recompiling (because of the RPI_LOGGING_ENABLE macro). This uses the
libcamera logging mechanism instead, so can be enabled/disabled at
runtime.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a typo in the word "unknown".
Suggested-by: IOhannes m zmölnig <umlaeute@debian.org>
Signed-off-by: Andrej Shadura <andrewsh@debian.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Adds FocusStatus to the image metadata, containing contrast measurements
across the image. Optionally also prints a contrast measure to the
console, to aid in manual adjustment of the lens. Note that it is not an
actual auto-focus algorithm that can drive a lens!
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This simply wires up the libcamera sharpness control in the Raspberry
Pi IPAs so that it controls the strength of the Raspberry Pi sharpness
control algorithm.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The sharpness control is, loosely speaking, a gain applied to
the amount of sharpening added to an image. We also report the
sharpness setting used back to the caller in metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
No need for it to be std::atomic as SwitchMode runs synchronously with
Prepare.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
mode changes
This commit causes the AGC to recalculate its camera exposure/gain
values when the camera mode changes. For example it's possible
that the exposure profile could be changed by the application so
the division between exposure time and analogue gain may be
different.
The other underlying reason (and which this commit accomplishes too)
is that the sensor's line timing may change in a new mode, and because
V4L2 drivers store a number of exposure _lines_, the resulting _time_
will "change under our feet". So we have to go through the process of
recalculating the correct number of lines and writing this back to the
sensor with every mode switch, regardless of anything else.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit adds a Metadata parameter to the SwitchMode method
enabling it to return camera and other settings to the caller
(usually the configure method, just after the camera mode has been
selected).
In future this will allow the Raspberry Pi IPAs to take those settings
(such as exposure and analogue gain) and program them directly into
the camera or ISP before the camera is even started.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add missing SPDX headers to miscellaneous small files. Use CC0-1.0 for
meson.build, .gitignore and the small include/linux/README, and licenses
matching the corresponding component for other files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA headers are installed into $prefix/include/libcamera/ipa/, but
are located in the source tree in include/ipa/. This requires files
within libcamera to include them with
#include <ipa/foo.h>
while a third party IPA would need to use
#include <libcamera/ipa/foo.h>
Not only is this inconsistent, it can create issues later if IPA headers
need to include each other, as the first form of include directive
wouldn't be valid once the headers are installed.
Fix the problem by moving the IPA headers to include/libcamera/ipa/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera internal headers are located in src/libcamera/include/.
The directory is added to the compiler headers search path with a meson
include_directories() directive, and internal headers are included with
(e.g. for the internal semaphore.h header)
#include "semaphore.h"
All was well, until libcxx decided to implement the C++20
synchronization library. The __threading_support header gained a
#include <semaphore.h>
to include the pthread's semaphore support. As include_directories()
adds src/libcamera/include/ to the compiler search path with -I, the
internal semaphore.h is included instead of the pthread version.
Needless to say, the compiler isn't happy.
Three options have been considered to fix this issue:
- Use -iquote instead of -I. The -iquote option instructs gcc to only
consider the header search path for headers included with the ""
version. Meson unfortunately doesn't support this option.
- Rename the internal semaphore.h header. This was deemed to be the
beginning of a long whack-a-mole game, where namespace clashes with
system libraries would appear over time (possibly dependent on
particular system configurations) and would need to be constantly
fixed.
- Move the internal headers to another directory to create a unique
namespace through path components. This causes lots of churn in all
the existing source files through the all project.
The first option would be best, but isn't available to us due to missing
support in meson. Even if -iquote support was added, we would need to
fix the problem before a new version of meson containing the required
support would be released.
The third option is thus the only practical solution available. Bite the
bullet, and do it, moving headers to include/libcamera/internal/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ipa-sign-install.sh script, run when installing libcamera, signs all
IPA modules present in the module directory. This would result in
third-party modules being signed if any are present in the directory.
Fix it by explicitly passing the list of IPA modules to the
ipa-sign-install.sh script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
Add the Raspberry Pi pipeline handler and IPA as targets in the
meson build system.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and
associated libraries.
All code is licensed under the BSD-2-Clause terms.
Copyright (c) 2019-2020 Raspberry Pi Trading Ltd.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Using find_program() to locate scripts part of the source tree causes
meson to print messages at setup time for each of those scripts:
Program ipa-sign.sh found: YES (/home/user/src/libcamera/src/ipa/ipa-sign.sh)
This pollutes the meson setup log with useless messages, as we know the
scripts are present. Use files() instead to avoid this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Commit 7206035ee609 ("libcamera: Regenerate IPA module signatures at
install time") replaced installation of the IPA module signatures with
an install script that signs all modules. While doing so, it
inadvertently also disabled generation of the signature at build time by
default. This breaks running libcamera binaries from the build
directory. Fix it.
Fixes: 7206035ee609 ("libcamera: Regenerate IPA module signatures at install time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When the IPA modules are installed, meson strips the DT_RPATH and
DT_RUNPATH from the binaries. This invalidates the signatures. Disable
installation of the .sign files and add an installation script to
regenerate them directly in the target directory. The .sign files still
need to be created at build time to support running IPA modules from the
build tree.
Two alternative approaches have been considered:
- meson could be taught a new target argument to preserve binary
compatibility by skipping any operation that modifies files. This has
been proposed in the #mesonbuild IRC channel. While this could be
interesting in the longer term, we need to fix the issue now.
- The module signatures could be computed on selected sections only.
While skipping the .dynamic section when signing may not cause
security issues, it would make signature generation and verification
more complex, and wasn't deemed worth it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
