| Age | Commit message (Collapse) | Author |
|---|
|
Only the first three entries of the matrix were set. Fix that.
Fixes: cbfdfa42cacc ("ipa: rkisp1: algorithms: Add crosstalk algorithm")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the colour temperature estimation gets skipped, the metadata isn't
populated. Fix that by filling the metadata early in the function.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The frame context is used to store data used for processing that frame.
It is later used to either act as input for other algorithms or to fill
the metadata. For the colour temperature this is not needed, as the
meatadata shall not contain the value that was active when the image was
processed, but the value that was calculated based on the statistics for
that image. This is no functional change.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the color gains are set manually it is possible to specify a
gain that wrapped the hardware limits. It would also be possible to
further tune the floating point limits, but that is an error prone
approach. So the limits are imposed on the integers, just before writing
to the hardware. This noticeably reduces some oscillations in the awb
regulation.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add black level value for OV5675 camera sensor.
According to datasheet, default value is 0x10, 10 bits width.
However, Linux kernel driver initializes black level target value
to 0x40. Set the value to the same as in kernel driver, but scaled
to 16 bits.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We have all these neat tuning files. Unfortunately we forgot to install
many of them.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The context parameter of the BlackLevelCorrection::init() function is
used. Drop the [[maybe_unused]] attribute.
Fixes: 50c28e135100 ("ipa: rkisp1: blc: Query black levels from camera sensor helper")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Move black levels for tuning files that contained a BLC block into
the camera sensor helpers.
ov4689.yaml had 66@12bit while the datasheet states 64@12bit. Use the
value from the datasheet (scaled to 16bit).
ov5640.yaml had 256@12bit while the datasheet states 16@10bit. Looking
at the commit message the 256 most likely stems from the imx219 tuning
file and 16@10bit is the same as the 64@12bit from the ov4689. This
seems more likely and is therefore used.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The black levels for imx219 and imx258 are now contained in the camera
sensor helpers. Remove them from the tuning file for the imx219. Add a
BLC entry to the imx258 tuning file.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add sensor black levels to the metadata of the rkisp1 pipeline.
Additionally enable raw support for this algorithm and add it to
uncalibrated.yaml, so that black levels get reported when capturing
tuning images. This is a bit of a hack, because no actual black level
correction is taking place in raw mode, but it is the easiest way to get
blacklevel reported for raw streams.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the camera sensor helper now has the ability to provide the black
level, use it. Black levels can still be overwritten by the tuning
file, but the direction is to remove them from the tuning files and move
them into the sensor helpers.
Additionally interpret all values based on 16bits. The conversion to the
scale required by the hardware is done in process(). It ensures all the
values inside libcamera are the same scale and is in preparation for the
i.MX8MP where black levels are based on a 20bit scale. Note that this
breaks existing tuning files. The tuning files distributed with
libcamera will be fixed in a later patch.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To be able to query the black levels, the black level correction
algorithm needs access to the camera sensor helper. Allow this by moving
the camHelper_ member from IPARkISP1 into IPAContext.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
For a proper tuning process we need to know the sensor black levels. In
most cases these are fixed and not reported by the kernel driver. Store
them inside the sensor helpers for later retrieval by the algorithms.
Add black level value corresponding to the data pedestal for three
initial sensors as documented in the datasheets. More should be added,
eventually filling the gaps for all supported sensors.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The gcc used in my current buildroot (Version 12.3) errors out with
-Wmaybe-uninitialized. Fix that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Multiple local functions are defined in the global namespace without the
static keyword. This compiles fine for now, but will cause a missing
declaration warning when we enable them. To prepare for that, move the
function declaration to an anonymous namespace.
While at it, for consistency, include an existing static function in the
namespace and drop the static keyword.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The matrixVlidateYaml() function is declared in the libcamera::ipa::
namespace, but defined in the libcamera:: namespace. This causes a
dynamic linking error at runtime. Fix it by moving the function
definition.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The frame context agc.update variable is used to indicate if the ISP
histogram metering parameters need to be updated. Rename it to
updateMetering to make usage more explicit.
Suggested-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All users of the Pwl::readYaml() function have been removed. The
function is not used, and is deprecated in favour of YamlObject::get().
Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that deserializing a Pwl object from YAML data is possible using the
YamlObject::get() function, replace all usage of Pwl::readYaml() to
prepare for its removal.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On Raspberry Pi 4
|
|
The AGC algorithm implements the AeEnable control at runtime. Move the
declaration of the control from the IPA module to the algorithm.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The sensor's maximum shutter speed is clamped by the maximum frame
duration specified in requests. If the requested maximum frame duration
is lower than the sensor's minimum shutter speed, the Agc::process()
function will pass a minimum value higher than the maximum to the
setLimits() function, resulting in an assertion failure. Fix it by
clamping the value to both the lower and the upper bounds.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC active state and frame context both contain a variable named
maxShutterSpeed. The variable is used to limit the maximum shutter speed
when computing the exposure time and gains, but stores the maximum frame
duration, not clamped by the sensor's maximum shutter speed. Rename it
to maxFrameDuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The effective exposure value for each frame is split into shutter time,
analog gain and digital gain based on the AGC constraint mode and
exposure mode. The algorithm uses the modes from the active state, which
tracks the latest queued request, instead of the frame context, which
tracks the value of the controls requested for that frame. Fix it by
using the correct modes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The condition
if (std::pow(std::floor(root), 2) < factor)
predivider = static_cast<uint8_t>(std::ceil(root));
else
predivider = static_cast<uint8_t>(std::floor(root));
can only be false when the factor's root is an integer. In that case,
std::ceil(root) and std::floor(root) will be equal. The computation can
thus be simplified by always rounding up.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ISP histogram parameters depends on the AE metering mode, but not on
the other AE algorithm controls. The exposure mode, constraints mode and
frame duration limits influence the behaviour of the algorithm, but not
the histogram computation parameters. Update the histogram parameters
only when AE metering mode changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Agc::computeHistogramPredivider() function doesn't need to modify
its size parameter. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAFrameContext AGC documentation is lagging behind the
implementation and misses many variables. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAActiveState AGC documentation is lagging behind the
implementation and misses many variables. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
agc_mean_luminance.h uses utils::Duration, include the corresponding
header.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Enumerators in libcamera start with an upper case letter. Fix the
AgcConstraint::Bound enumerators.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When no metering modes are specified in the tuning file, the AGC
initialzation fails with
[0:00:46.148508875] [209] ERROR RkISP1Agc agc.cpp:46 'AeMeteringMode' parameter not found in tuning file
which results in a camera initialization failure. Fix it by downgrading
the error into a warning, and continuing the AGC initialization with the
default metering mode.
Fixes: 35233938ee5d ("ipa: rkisp1: agc: Read histogram weights from tuning file")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an operation for multiplying a matrix with a vector.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an algorithm module to the rkisp1 IPA for crosstalk correction.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a class to encapsulate the functionality of fetching a matrix based
on an integer key, and interpolating if there is no exact match. This is
expected to be used by both color correction matrices / crosstalk
correction as well as lens shading correction.
A cache is included only for exact matches of the key. The caller is
expected to decide the tolererance for rounding.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a class to represent a Matrix object and operations for adding
matrices, multipling a matrix by a scalar, and multiplying two matrices.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement a specialization of the YamlObject::Getter structure to
support deserializing ipa::Pwl objects from YAML data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Pwl::Pwl(const std::vector<Point> &) constructor is inefficient as
it makes a copy of the given points vector. Add a second constructor
that takes an rvalue reference to a points vector to provide move
semantics.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a size() function to the Pwl class to return the number of points in
the piecewise linear function. This is useful, for instance, to validate
that all points added with append() or prepend() have been taken into
account.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Pwl::empty() function is a one-liner that can be easily optimized by
the compiler given the chance. Make it inline.
While at it, move the function documentation block to match the class
declaration order.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Suffix the Doxygen \param commands with the direction for all
parameters.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that YAML deserialization of Vector instances is supported through
YamlObject::get(), remove the Vector::readYaml() function. It turns out
not to be used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement a specialization of the YamlObject::Getter structure to
support deserializing ipa::Vector objects from YAML data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Plumb controls for setting metering mode, exposure mode, constraint
mode, and frame duration limits. Also report them as available controls,
as well as in metadata.
While at it, add the missing #include for tuple, as a std::tie is used.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support to the rkisp1 AGC to read histogram weights from the tuning
file. As controls for selecting the metering mode are not yet supported,
for now hardcode the matrix metering mode, which is the same as what the
AGC previously hardcoded.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
A few function parameters are marked with [[maybe_unused]] but are
actually used. Drop the attribute.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
convertContrast() and convertSaturation() are equal. Merge them into
one.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a anonymous namespace instead of the static keyword to limity symbol
visibility.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All CameraSensorHelper subclasses define their member functions inline,
except for the CameraSensorHelperAr0521 class. Inline the gainCode() and
gain() functions to match the other classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace one occurrence of the auto type qualifier with the explicit type
it represents to increase readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The values for the default gamma table are stored in an array that is
never modified. Mark it as static constexpr to facilitate optimizations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
