| Age | Commit message (Collapse) | Author |
|---|
|
Add a virtual IpaBase::platformStart() member function that is called
at the end of IpaBase::start(). For the IpaVc4 derived class, this
function does nothing, but will be used in the PiSP derived class to
reset internal state on startup.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We avoid skipping the IPAs while frameCount_ is less than
dropFrameCount_, indicating that these frames will not be sent to the
application. This means that when these numbers are equal then this is
the first frame the application will get, so again, we must avoid
skipping the IPAs. Consequently the test here must avoid the case of
equality.
Fixes: 51533fecae8d ("ipa: rpi: Fix frame count logic when running algorithms")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA stores a list of the last 10 frame lengths applied to the
sensor for determining the timeout to use. This list gets reset on
start(), but there is a path through the code that accesses this list
in configure() which happens earlier, causing a logical error.
Fix this by constructing the list with 10 initial values of 0s.
Bug: https://github.com/raspberrypi/libcamera/issues/64
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The frame counter test to determine if we run the IPA algorithms has a
logic bug where it treats dropFrameCount_ and mistrustCount_ as frame
numbers, not counts of frames (which it is). The implication is that
startup convergence and initial settings take one extra frame to apply.
Fix this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the json file parsing failed due to a malformed file, the root
pointer would be null. This was not tested and caused a segfault when
trying to use the pointer to retrieve the version key.
Fix this by bailing out early if the parser returns a null pointer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Whenever we run Agc::process(), we store the most recent total
exposure requested for each channel.
With these values we can apply the channel constraints after
time-filtering the requested total exposure, but before working out
how much digital gain is needed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
A channel constraint is somewhat similar to the upper/lower bound
constraints that we use elsewhere, but these constraints apply between
multiple AGC channels. For example, it lets you say things like "don't
let the channel 1 total exposure be more than 8x that of channel 0",
and so on. By using both an upper and lower bound constraint, you
could fix one AGC channel always to be a fixed ratio of another.
Also read a vector of them (if present) when loading the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The switchMode, prepare and process methods are updated to implement
multi-channel AGC correctly:
* switchMode now invokes switchMode on all the channels (whether
active or not).
* prepare must find what channel the current frame is, and run on
behalf of that channel.
* process updates the most recent DeviceStatus and statistics for the
channel of the frame that has just arrived, but generates updated
values working through the active channels in round-robin fashion.
One minor detail in process is that we don't want to change the
DeviceStatus metadata of the current frame, so we now pass this to the
AgcChannel's process method, rather than letting it find the
DeviceStatus in the metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This commit does the basic reorganisation of the code in order to
implement multi-channel AGC. The main changes are:
* The previous Agc class (in agc.cpp) has become the AgcChannel class
in (agc_channel.cpp).
* A new Agc class is introduced which is a wrapper round a number of
AgcChannels.
* The basic plumbing from ipa_base.cpp to Agc is updated to include a
channel number. All the existing controls are hardwired to talk
directly to channel 0.
There are a couple of limitations which we expect to apply to
multi-channel AGC. We're not allowing different frame durations to be
applied to the channels, nor are we allowing separate metering
modes. To be fair, supporting these things is not impossible, but
there are reasons why it may be tricky so they remain "TBD" for now.
This patch only includes the basic reorganisation and plumbing. It
does not yet update the important methods (switchMode, prepare and
process) to implement multi-channel AGC properly. This will appear in
a subsequent commit. For now, these functions are hard-coded just to
use channel 0, thereby preserving the existing behaviour.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a new helper function Histogram::interBinMean() that essentially
replaces the existing Histogram::interQuantileMean() logic but working on
bins instead.
Rework the interQuantileMean() to call into interBinMean() with the
appropriate convertion from quatiles to bins.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
StatisticsPtr is a shared pointer, so the use of std::make_unique to
create it was a bit confusing. Use std::make_shared instead.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Agc::process() function returns an AgcStatus object in the
metadata as before, but Agc::prepare() is changed to return the values
it computes in a separate AgcPrepareStatus object (under the new tag
"agc.prepare_status").
The "digitalGain" and "locked" fields are moved from AgcStatus to
AgcPrepareStatus.
This will be useful going forward as we can be more flexible about the
order in which prepare() and process() are called, without them
trampling on each other's results.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We now time-filter the exposure before sorting out how much digital
gain is required. This is actually a little more natural and
simplifies the code. It also prepares us for some future work where
this arrangement will be helpful.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrpyi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
prepare() doesn't use the AWB status, so fetching it in process() is
probably better. This change is preparatory to other changes, where we
may find ourselves calling process() without having called prepare()
previously.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The imx290 produces a single unusable frame on startup and mode switch.
This is signalled to the IPA in the mode switch case, but not the
startup case. Fix this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The FocusFom metadata was no longer being reported back because the
"focus.status" metadata was never being created.
Additionally, the scaling of the focus FoMs was over-zealous, rounding
just about everything down to zero.
Fixes: ac7511dc4c59 ("ipa: raspberrypi: Generalise the focus reporting code")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Altered the color matrices for the tuning files for various
cameras in order to make them more color accurate.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
We handle the flicker modes by passing the correct period to the
AEC/AGC algorithm which already contains the necessary code.
The "Auto" mode, as well as reporting the detected flicker period via
the "AeFlickerDetected" metadata, are unsupported for now.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Colour shading should be turned off for the mono variant of the IMX296
sensor. To do this, set all the colour gain coefficients to 1.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <daivd.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The imx708 must drop a single frame on startup - but only when in HDR
mode. Non-HDR modes do not need to drop frames. Fix the logic in
hideFramesModeSwitch() which currently unconditionally advertises to
drop one frame.
Unfortunately there is no clear way to tell if the sensor is in the HDR
mode. So for now, look the resolution and framerate to deduce this.
Additionally ensure we override hideFramesStartup() and return the same
number as hideFramesModeSwitch().
Bug: https://github.com/raspberrypi/libcamera-apps/issues/524
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In commit 0ee9339331c6, a default metering/exposure/constraint mode is
used if a control sets a mode that is not listed in the camera tuning
file.
Setting a default mode may be undesirable in these cases, so instead
keep the agc mode unchanged. This also matches the behaviour for other
IPA controls where no changes are made in error conditions.
Fixes: 0ee9339331c6 ("ipa: rpi: agc: Gracefully handle missing agc modes")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
If a metering/exposure/constraint mode is not listed in the sensor
tuning file, and a control for the missing mode is set on the agc, we
terminate the application with a fatal log message.
Instead of this fatal termination, log a warning message and switch to
the appropriate default mode so that the application continues running.
Bug: https://github.com/raspberrypi/libcamera/issues/59
Bug: https://github.com/ayufan/camera-streamer/issues/67
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the char array strings in struct AgcStatus with std::string
objects. This simplifies the string handling in the source code.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some sensor tuning files were missing the short and/or long exposure
mode profiles. Add the missing items to the relevant files.
As a drive-by, rename the "sport" exposure profile to "short" for the
IMX290 tuning.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On the first ipa->configure() call, set the lens position (if a lens is
present) to the default position. Typically this would be the hyperfocal
position based on the tuning data.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In addition to sensor controls, return lens controls from
IpaBase::configure() back to the pipeline handler. If there are lens
controls present in the ControlList, action them in the pipeline handler
as part of the configure routine.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit a3178dd0391f ("ipa: rkisp1: agc: drop hard-coded analogue gain range")
removed both minimum and maximum limits for the analogue gain value.
However, as some sensors can potentially have a minimum gain lower than
1.0, restore the check for the minimum limit.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the sensor's analogue gain range is known, drop the arbitrary
maximum limit for the sensor analogue gain.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The addition of the CameraSensorHelperImx327 class was not correctly
inserted in alphabetical sort order.
Move it to the correct location.
Fixes: 7d5b38e2ef41 ("libipa: camera_sensor_helper: Add IMX327 helper")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not advertise colour related controls (i.e. [A]WB, colour saturation)
in the ControlInfoMap of available controls returned out to the
application.
Silently ignore these controls in the control handler in case applications
don't use the advertised ControlInfoMap to validate controls.
As a drive-by fix, don't advertise controls::ColourCorrectionMatrix in
the ControlInfoMap as it is not handled by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the noise profile and reference lux level with newly taken
calibration pictures. Remove GEQ/cross-talk processing block as this is
a mono sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for the Sony IMX327, which is added to the kernel with
commit 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327
variant"). It is basically a derivate of the IMX290, therefore also
derive the helper.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the sensor's analogue gain range is known (read-out in
IPARkISP1::configure()), drop the limiting hard-coded range.
This enables better performance in low-light conditions for sensors with
a higher gain (e.g. the imx327).
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When iterating over enabled pipelines and IPA modules, libcamera
descends into subdirectories in a recursive manner, which involves
nested loops. Both the outer and inner loops use the same loop variable
named 'pipeline'. As the outer loop uses the variable after descending
into the inner directory, it ends up using an incorrect value. Fix it by
moving all use of the variable before the subdir() call, and add a
comment that warns about the issue to avoid reintroducing it.
Fixes: e8526c0c2bc6 ("ipa: meson: Allow nested IPA directory structures")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Create a new PipelineHandlerBase class that handles general purpose
housekeeping duties for the Raspberry Pi pipeline handler. Code the
implementation of new class is essentially pulled from the existing
pipeline/rpi/vc4/raspberrypi.cpp file with a small amount of
refactoring.
Create a derived PipelineHandlerVc4 class from PipelineHandlerBase that
handles the VC4 pipeline specific tasks of the pipeline handler. Again,
code for this class implementation is taken from the existing
pipeline/rpi/vc4/raspberrypi.cpp with a small amount of
refactoring.
The goal of this change is to allow third parties to implement their own
pipeline handlers running on the Raspberry Pi without duplicating all of
the pipeline handler housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The region weights for the the AGC zones are handled by the AGC
algorithm. Apply them directly in the IPA (vc4.cpp) to the statistics
that we pass to the AGC.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new IpaBase class that handles general purpose housekeeping
duties for the Raspberry Pi IPA. The implementation of the new class
is essentially pulled from the existing ipa/rpi/vc4/raspberrypi.cpp file
with a minimal amount of refactoring.
Create a derived IpaVc4 class from IpaBase that handles the VC4 pipeline
specific tasks of the IPA. Again, code for this class implementation is
taken from the existing ipa/rpi/vc4/raspberrypi.cpp with a
minimal amount of refactoring.
The goal of this change is to allow third parties to implement their own
IPA running on the Raspberry Pi without duplicating all of the IPA
housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Restructure the IPA mojom interface to be more consistent in the use
of the API. Function parameters are now grouped into *Params structures
and results are now returned in *Results structures.
The following pipeline -> IPA interfaces have been removed:
signalQueueRequest(libcamera.ControlList controls);
signalIspPrepare(ISPConfig data);
signalStatReady(uint32 bufferId, uint32 ipaContext);
and replaced with:
prepareIsp(PrepareParams params);
processStats(ProcessParams params);
signalQueueRequest() is now encompassed within prepareIsp().
The following IPA -> pipeline interfaces have been removed:
runIsp(uint32 bufferId);
embeddedComplete(uint32 bufferId);
statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls);
and replaced with the following async calls:
prepareIspComplete(BufferIds buffers);
processStatsComplete(BufferIds buffers);
metadataReady(libcamera.ControlList metadata);
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current IPA build files require a flat directory structure for the
IPAs. Modify the build files to remove this restriction and allow a
directory structure such as:
src/ipa
|- raspberrypi
|- common
|- cam_helpers
|- controller
|- vc4
|- rkisp1
|- ipu3
where each subdir (e.g. raspberrypi/common, raspberrypi/cam_helper) has
its own meson.build file. Such a directory structure will be introduced
for the Raspberry Pi IPA in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the imx258 and ov8858
sensors found on Pine64 PinephonePro devices.
The tuning file contain LSC tables extracted from the Rockchip Android
BSP the PinephonePro ships with.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the ov2685 and ov5695
sensor found on Google DRU "Scarlett" tablet.
The tuning files contain LSC tables extracted from the Google Chrome
Android HAL configuration files, available at
src/overlays/overlay-scarlet/media-libs/cros-camera-hal-configs-scarlet/files/IQ/
at revision "stabilize-14790.B".
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The "shadows" constraint mode actually exists in a number of tuning
files, but had been omitted from the list of supported modes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Clarify IPA's acronym by specifying what "IPA" stands for as part of the
ipa namespaces' "brief" doxygen-generated description. This allows
visitors to the docs to immediately have an idea of the purpose of the
IPA namespace at a glance. Because of the prevalence and importance of
the IPA namespace and functionality, the fact that it stands for "Image
Processing Algorithm" should be accessible to even casual perusers of
the docs.
Signed-off-by: Gabby George <gabbymg94@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Files opened internally in libcamera without the O_CLOEXEC file will
remain open upon a call to one of the exec(3) functions. As exec()
doesn't destroy local or global objects, this can lead to various side
effects. Avoid this by opening file descriptors with O_CLOEXEC for all
internal files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the generalised focus statistics structure to compute the centre
window focus FoM value. This avoids needed to hard-code a specific
grid size.
Remove the focus reporting algorithm as the functionality is duplicated
by this bit of IPA code. Remove focus_status.h as it is no longer needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the autofocus algorithm. Instead, use the "target" string provided
by the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
Additionally, PDAF statistics are represented by a generalised region
statistics structure to be device agnostic.
These changes also require the autofocus algorithm to initialise
region weights on the first frame's prepare()/process() call rather
than during initialisation.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the AGC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
This change replaces all hard-coded arrays with equivalent std::vector
types.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update the overloaded RegionStats::get() and RegionStats::getFloating()
member functions to return a Region struct for consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generalise the contrast algorithm code by removing any hard-coded
assumptions about the target hardware platform. Instead, the algorithm
code creates a generic Pwl that gets returned to the IPA, where it gets
converted to the bcm2835 hardware specific lookup table.
As a drive-by, remove an unused mutex.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
