| Age | Commit message (Collapse) | Author |
|---|
|
As the sensor's analogue gain range is known, drop the arbitrary
maximum limit for the sensor analogue gain.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The addition of the CameraSensorHelperImx327 class was not correctly
inserted in alphabetical sort order.
Move it to the correct location.
Fixes: 7d5b38e2ef41 ("libipa: camera_sensor_helper: Add IMX327 helper")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not advertise colour related controls (i.e. [A]WB, colour saturation)
in the ControlInfoMap of available controls returned out to the
application.
Silently ignore these controls in the control handler in case applications
don't use the advertised ControlInfoMap to validate controls.
As a drive-by fix, don't advertise controls::ColourCorrectionMatrix in
the ControlInfoMap as it is not handled by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the noise profile and reference lux level with newly taken
calibration pictures. Remove GEQ/cross-talk processing block as this is
a mono sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for the Sony IMX327, which is added to the kernel with
commit 2d41947ec2c0 ("media: i2c: imx290: Add support for imx327
variant"). It is basically a derivate of the IMX290, therefore also
derive the helper.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the sensor's analogue gain range is known (read-out in
IPARkISP1::configure()), drop the limiting hard-coded range.
This enables better performance in low-light conditions for sensors with
a higher gain (e.g. the imx327).
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When iterating over enabled pipelines and IPA modules, libcamera
descends into subdirectories in a recursive manner, which involves
nested loops. Both the outer and inner loops use the same loop variable
named 'pipeline'. As the outer loop uses the variable after descending
into the inner directory, it ends up using an incorrect value. Fix it by
moving all use of the variable before the subdir() call, and add a
comment that warns about the issue to avoid reintroducing it.
Fixes: e8526c0c2bc6 ("ipa: meson: Allow nested IPA directory structures")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Create a new PipelineHandlerBase class that handles general purpose
housekeeping duties for the Raspberry Pi pipeline handler. Code the
implementation of new class is essentially pulled from the existing
pipeline/rpi/vc4/raspberrypi.cpp file with a small amount of
refactoring.
Create a derived PipelineHandlerVc4 class from PipelineHandlerBase that
handles the VC4 pipeline specific tasks of the pipeline handler. Again,
code for this class implementation is taken from the existing
pipeline/rpi/vc4/raspberrypi.cpp with a small amount of
refactoring.
The goal of this change is to allow third parties to implement their own
pipeline handlers running on the Raspberry Pi without duplicating all of
the pipeline handler housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The region weights for the the AGC zones are handled by the AGC
algorithm. Apply them directly in the IPA (vc4.cpp) to the statistics
that we pass to the AGC.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new IpaBase class that handles general purpose housekeeping
duties for the Raspberry Pi IPA. The implementation of the new class
is essentially pulled from the existing ipa/rpi/vc4/raspberrypi.cpp file
with a minimal amount of refactoring.
Create a derived IpaVc4 class from IpaBase that handles the VC4 pipeline
specific tasks of the IPA. Again, code for this class implementation is
taken from the existing ipa/rpi/vc4/raspberrypi.cpp with a
minimal amount of refactoring.
The goal of this change is to allow third parties to implement their own
IPA running on the Raspberry Pi without duplicating all of the IPA
housekeeping tasks.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Restructure the IPA mojom interface to be more consistent in the use
of the API. Function parameters are now grouped into *Params structures
and results are now returned in *Results structures.
The following pipeline -> IPA interfaces have been removed:
signalQueueRequest(libcamera.ControlList controls);
signalIspPrepare(ISPConfig data);
signalStatReady(uint32 bufferId, uint32 ipaContext);
and replaced with:
prepareIsp(PrepareParams params);
processStats(ProcessParams params);
signalQueueRequest() is now encompassed within prepareIsp().
The following IPA -> pipeline interfaces have been removed:
runIsp(uint32 bufferId);
embeddedComplete(uint32 bufferId);
statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls);
and replaced with the following async calls:
prepareIspComplete(BufferIds buffers);
processStatsComplete(BufferIds buffers);
metadataReady(libcamera.ControlList metadata);
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current IPA build files require a flat directory structure for the
IPAs. Modify the build files to remove this restriction and allow a
directory structure such as:
src/ipa
|- raspberrypi
|- common
|- cam_helpers
|- controller
|- vc4
|- rkisp1
|- ipu3
where each subdir (e.g. raspberrypi/common, raspberrypi/cam_helper) has
its own meson.build file. Such a directory structure will be introduced
for the Raspberry Pi IPA in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the imx258 and ov8858
sensors found on Pine64 PinephonePro devices.
The tuning file contain LSC tables extracted from the Rockchip Android
BSP the PinephonePro ships with.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add to the RkISP1 data configuration files for the ov2685 and ov5695
sensor found on Google DRU "Scarlett" tablet.
The tuning files contain LSC tables extracted from the Google Chrome
Android HAL configuration files, available at
src/overlays/overlay-scarlet/media-libs/cros-camera-hal-configs-scarlet/files/IQ/
at revision "stabilize-14790.B".
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The "shadows" constraint mode actually exists in a number of tuning
files, but had been omitted from the list of supported modes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Clarify IPA's acronym by specifying what "IPA" stands for as part of the
ipa namespaces' "brief" doxygen-generated description. This allows
visitors to the docs to immediately have an idea of the purpose of the
IPA namespace at a glance. Because of the prevalence and importance of
the IPA namespace and functionality, the fact that it stands for "Image
Processing Algorithm" should be accessible to even casual perusers of
the docs.
Signed-off-by: Gabby George <gabbymg94@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Files opened internally in libcamera without the O_CLOEXEC file will
remain open upon a call to one of the exec(3) functions. As exec()
doesn't destroy local or global objects, this can lead to various side
effects. Avoid this by opening file descriptors with O_CLOEXEC for all
internal files.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the generalised focus statistics structure to compute the centre
window focus FoM value. This avoids needed to hard-code a specific
grid size.
Remove the focus reporting algorithm as the functionality is duplicated
by this bit of IPA code. Remove focus_status.h as it is no longer needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the autofocus algorithm. Instead, use the "target" string provided
by the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
Additionally, PDAF statistics are represented by a generalised region
statistics structure to be device agnostic.
These changes also require the autofocus algorithm to initialise
region weights on the first frame's prepare()/process() call rather
than during initialisation.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the AGC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
This change replaces all hard-coded arrays with equivalent std::vector
types.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update the overloaded RegionStats::get() and RegionStats::getFloating()
member functions to return a Region struct for consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generalise the contrast algorithm code by removing any hard-coded
assumptions about the target hardware platform. Instead, the algorithm
code creates a generic Pwl that gets returned to the IPA, where it gets
converted to the bcm2835 hardware specific lookup table.
As a drive-by, remove an unused mutex.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The algorithm uses the data type std::vector<std::array<double, 4>> to
represent the large sparse matrices that are XY (X, Y being the ALSC
grid size) high but with only 4 non-zero elements on each row.
Replace this slightly long type name by SparseArray<double>.
No functional changes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Array2D class is a very thin wrapper round std::vector that can be
used almost identically in the code, but it carries its 2D size with
it so that we aren't passing it around all the time.
All the std::vectors that were X * Y in size (X and Y being the ALSC
grid size) have been replaced. The sparse matrices that are XY * 4 in
size have not been as they are somewhat different, are used
differently, require more code changes, and actually make things more
confusing if everything looks like an Array2D but are not the same.
There should be no change in algorithm behaviour at all.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the ALSC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
The ALSC calculations use run-time allocated arrays/vectors on every
frame. Allocating these might add a non-trivial run-time penalty.
Replace these dynamic allocations with a set of reusable pre-allocated
vectors during the init phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new Controller::HardwareConfig structure that captures the
hardware statistics grid/histogram sizes and pipeline widths. This
ensures there is a single centralised places for these parameters.
Add a getHardwareConfig() helper function to retrieve these values for a
given hardware target.
Update the statistics populating routine in the IPA to use the values
from this structure instead of the hardcoded numbers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The target string may be used by algorithms to determine the running
hardware target.
Store the target string provided by the camera tuning files in the
controller state. Add a getTarget() member function to retrieve this
string.
Validate the correct hardware target ("bcm2835") during the IPA
initialisation phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix a bug in the default frame durations calculation where the min/max
values are swapped round. This is a rarely travelled code path, so has
not actually caused a reported failure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make a copy of the CameraMode structure on a switch mode call. This
replaces the existing lastSensitivity_ field.
Limit the AGC gain calculations to the minimum value given by the
CameraMode structure. The maximum value remains unclipped as any gain
over the sensor maximum will be made up by digital gain.
Rename clipShutter to limitShutter for consistency, and have the latter
limit the shutter speed to both upper and lower bounds.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the new analogue gain and shutter speed limit fields in the ipa
code when reporting back the control value limits and calculating the
analogue gain code to use. This also replaces the now unused (and
removed) maxSensorGainCode_ field.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add fields in the CameraMode structure to capture the mode specific
limits for analogue gain and shutter speed. For convenience, also add
fields for minimum and maximum frame durations.
Populate these new fields when setting up the CameraMode structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide a CameraSensorHelper for the OV2685, along with the
corresponding camera sensor properties.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide a CameraSensorHelper for the OV5647 as used in the Raspberry Pi
Camera Module v1.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When compiled with LTO (the default on Ubuntu), the global static
objects camHelpers and algorithms cause a crash in raspberrypi_ipa_proxy
at runtime as they're not allocated by the time the registration
routines execute.
This is a fairly crude fix which just converts the global static objects
into local static objects inside an equivalently named function.
Signed-off-by: Dave Jones <dave.jones@canonical.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some updates to the tuning for the imx296 sensors.
For the colour variant:
* Minor change to the AWB curve, making things a little less green.
* Updated CCMs that reduce colour saturation to a more accurate level.
Thanks to Dr. Rolf Henkel for these measurements and calculations.
* Sharpening has been toned down quite a lot.
* rpi.focus algorithm added so that the focus measure can be accessed.
The sharpening and focus changes are applied to the mono version of
the sensor too as we expect similar characteristics.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The maxVal variable in the computeInitialY function needs to be a
uint64_t, otherwise the subsequent multiplications in the function
can overflow on relatively high resolution images (when the counts in
the regions go over 16 bits).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The existing mechanism of setting a timeout value simply uses the
maximum possible frame length advertised by the sensor mode. This can be
problematic when, for example, the IMX477 sensor can use a frame length
of over 600 seconds. However, for typical usage the frame length will
never go over several 100s of milliseconds, making the timeout very
impractical.
Store a list of the last 10 frame length values requested by the AGC. On
startup, and at the end of every frame, take the maximum frame length
value from this list and return that to the pipeline handler through the
setCameraTimeoutValue() signal. This allows the timeout value to better
track the actual sensor usage.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an explicit helper function setCameraTimeout() in the pipeline
handler to set the Unicam timeout value. This function is signalled from
the IPA to set up an appropriate timeout. This replaces the
maxSensorFrameLengthMs value parameter returned back from
IPARPi::start().
Adjust the timeout to be 5x the maximum frame duration reported by the
IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The RkISP1 implementation of the LensShadingCorrection algorithm has been
made adaptive to the scene color temperature in commit 14c869c00fdd ("ipa:
rkisp1: Take into account color temperature during LSC algorithm").
The LSC algorithm interpolates the correction factors using the
table's reference color temperatures. When calculating the interpolation
coefficients, an unintended integer division makes both coefficient
zeros resulting in a completely black image.
Fix this by type casting to double one of the division operands.
Fixes: 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to
know this bit-depth when computing the Y value for the image.
Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all
region sums to 16-bits when filling the Statistics structure. AWB and ALSC are
agnostic about pipeline depth, so do not need changing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to
shared_ptr<RPiController::Statistics>. This removes any hardware specific header
files and structures from the algorithms source code.
Add a new function in the Raspberry Pi IPA to populate the generic statistics
structure from the values provided by the hardware in the bcm2835_isp_stats
structure.
Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the
generic statistics structure appropriately in their calculations. Additionally,
remove references to any hardware specific headers and defines in these source
files.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Release the statistics buffer after running the through the AWB calculations.
Only the "counted" statistics are copied out to a local structure, so keeping
the statistics buffer allows the algorithm to see the "uncounted" statistics as
well.
This is currently handled by hard-coding the total number of statistics regions
regions based on the structure definition in the bcm2835_isp_stats structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a default constructor to the RPiController::Histogram class that creates
an empty histogram. Since this is a cumulative histogram, push a value of 0 into
the first (and only) bin to signify this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
At present, the controller algorithms access the bcm2835_isp_stats structure,
which is hardware specific. It would be desirable to abstract out the statistics
structure to remove hardware specific headers from the algorithms source files.
Define a new templated RegionStats class that encompasses region based
statistics generated by the ISP. For the VC4 ISP, this can be used to hold
RGB sums and focus FoM values.
Define a new Statistics structure that holds all the VC4 ISP statistics output.
This includes AGC histograms, AGC/AWB region sums and focus FoM regions.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for Raspberry Pi Camera 3 modules (Sony IMX708 camera sensor) to the
Raspberry Pi IPA. These modules are available in either normal or wide angle
lens, both with IR or no IR cut options, giving a total for 4 variants. Provide
IQ tuning files for all four variants.
The IMX708 camera helper additionally parses PDAF and HDR histogram data that
is provided in the embedded data stream from Unicam.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the current frame's lens position (in dioptres) to the DeviceStatus
structure. This value is obtained from the AfAlgorithm::getLensPosition()
member function. Return this lens position back to the pipeline handler to
store in the metadata field of the request.
As a drive-by, fixup some inaccurate comments in the DeviceStatus structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the first version of the Raspberry Pi autofocus algorithm. This
implementation uses a hybrid of contrast detect autofocus (CDAF) and phase
detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to
having less "hunting" behavior.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the results returned from the autofocus algorithm by updating lens
actuator position to the desired value. Update the Request metadata with the
algorithm status to provide back to the application.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add handlers for all autofocus related libcamera controls. Translate these
controls to the RPiController autofocus algorithm API.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
