| Age | Commit message (Collapse) | Author |
|---|
|
The datasheet states that the low 7 bits are fraction bits.
real_gain = GainCode/128
For example, 0x080 is 1x gain, 0x100 is 2x gain.
It means that we should have m0=1 and c1=128.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Extend the CameraSensorHelper factory with support for an
OV13858 sensor as found in the Soraka Chromebook.
The datasheet states that low 7 bits are fraction bits, so the gain is
calculated as gainCode=128*gain.
According to the formula, it means m0=1 and c1=128.
m1 then has to be 0, and c0=0.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Metadata class defines a shared_ptr named MetadataPtr. It is not
used anywhere in the source code, so remove it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
s/DefaultAnalogueGain/defaultAnalogueGain/
s/DefaultExposureTime/defaultExposureTime/
Change these for consistency with the other static const variables.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the recent change to allow long exposures on the imx477, the existing 100s
limit was not adequate.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the imx477 CamHelper to use long exposure modes if needed.
This is done by overloading the CamHelper::GetVBlanking function to return a
frame length (and vblank value) computed using a scaling factor when the value
would be larger than what the sensor register could otherwise hold.
CamHelperImx477::Prepare is also overloaded to ensure that the "device.status"
metadata returns the right value if the long exposure scaling factor is used.
The scaling factor is unfortunately not returned back in metadata.
With the current imx477 driver, we can achieve a maximum exposure time of approx
127 seconds since the HBLANK control is read-only.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Store the frame length into the DeviceStatus struct. The value is extracted
from embedded data when available, or calculated from the VBLANK value passed
from DelayedControls otherwise.
Update imx477 and imx219 CamHelper classes to extract the frame length from the
embedded data buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an operator<< overload to log all fields in DeviceStatus, and remove the
manual logging statements in the IPA and CamHelper.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor sets all fields to 0. This replaces the memset(0) and default
value initialisation usage in the agc and lux controllers respectively.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This header file is no longer C compatible, so remove the extern "C"
declaration.
Replace C++ style comments with C style based on libcamera guidelines.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A few lines needed to be wrapped under 80 lines.
Remove some unneeded documentation and minor typos.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The [[maybe_unused]] in the IMX477 camera helper isn't needed. This had
been pointed out by Naush during review, but I failed to update the code
before pushing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Instead of having each CamHelper subclass the MdParserSmia, change the
implementation of MdParserSmia to be more generic. The MdParserSmia now gets
given a list of registers to search for and helper functions are used to compute
exposure lines and gain codes from these registers.
Update the imx219 and imx477 CamHelpers by using this new mechanism.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The derived CamHelper class now allocates a metadata parser object through a
unique_ptr that is passed to the base class constructor. This automates the
lifetime management of the parser object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The necessary tuning file and CamHelper is added for the ov9281 sensor.
The ov9281 is a 1280x800 monochrome global shutter sensor. To enable
it, please add
dtoverlay=ov9281
to the /boot/config.txt file and reboot the Pi.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Warnings about the lack of AWB status results are demoted to being
just "Debug". With monochrome sensors becoming more common this would
otherwise overwhelm the console output, and in practice nothing is
really lost as it is normally very evident if AWB is failing to run.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order for the CameraSensorHelper to be instantiated, we need to find
its factory using the camera sensor model name stored in
IPASettings::sensorModel. As we don't need to do it at each configure
call (the sensor is not changing in-between), implement the init call in
IPAIPU3 to do that.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For various sensor operations, it may be needed to do sensor specific
computations, like analogue gain or vertical blanking.
This commit introduces a new camera sensor helper in libipa which aims
to solve this specific issue.
It is based on the MIPI alliance Specification for Camera Command Set
and implements, for now, only the analogue "Global gain" mode.
Setting analogue gain for a specific sensor is not a straightforward
operation, as one needs to know how the gain is calculated for it.
Three helpers are created in this patch: imx219, ov5670 and ov5693.
Adding a new sensor is pretty straightforward as one only needs to
implement the sub-class for it and register that class to the
CameraSensorHelperFactory.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Headers which must not be exposed as part of the public libcamera API
should include base/private.h.
Any interface which includes the private.h header will only be able to
build if the libcamera_private dependency is used (or the
libcamera_base_private dependency directly).
Build targets which are intended to use the private API's will use the
libcamera_private to handle the automatic definition of the inclusion
guard.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move span, and adjust the Doxygen exclusion as well.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The File abstraction is a base helper and not part of the libcamera
API. Move it to to allow usage by users of the base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the utils functionality to the libcamera/base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
std::chrono::Duration is provided quite conveniently by
libcamera::utils::Duration wrapper. Port IPAIPU3 to use that
for duration-type entities (such as exposure time), such that
it becomes consistent with rest of the codebase.
The commit doesn't introduce any functional changes.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The SMIA metadata parser could possibly read one byte past the end of the
buffer as the buffer size test ran after the read operation. Fix this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPAs are loaded from a defined location set as IPA_MODULE_DIR.
Furthermore, configuration files for both libcamera and IPAs are loaded
from paths defined during the meson configuration.
To make it easy to identify these locations for a given configuration,
present them as a 'paths' section in the meson summary.
This adds a summary section to meson in the form:
Paths
LIBCAMERA_DATA_DIR : "/usr/share/libcamera"
LIBCAMERA_SYSCONF_DIR : "/etc/camera/libcamera"
IPA_PROXY_DIR : "/usr/libexec/libcamera"
IPA_CONFIG_DIR : "/etc/camera/libcamera/ipa:/usr/share/libcamera/ipa"
IPA_MODULE_DIR : "/usr/lib/x86_64-linux-gnu/libcamera"
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Adjust source formatting to closer match libcamera guidelines:
- Remove unused header files.
- Switch to C style comments.
- Adjust whitespace for readability.
- Remove retcode local variable usage.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The file implements the MdParserSmia class, so change the file name to reflect
this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Set some sensible default values for member variables of the MdParser
class.
Remove buffer_size_bytes_ along with some related asserts as this class
now uses libcamera::Span for buffer handling, and buffer_size_bytes_ is
unused.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Adjust source formatting to closer match libcamera guidelines:
- Switch to C style comments.
- Add whitespace for readability.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPU3 IPA interface does not define a return value from configure().
This prevents errors from being reported back to the pipeline handler
when they occur in the IPA.
Update the IPU3 IPA interface and add return values to the checks in
IPAIPU3::configure() accordingly
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ipu3_agc.h forward-declares the IPACameraSensorInfo structure, but
incorrectly declares it as a class. This causes a compilation error with
clang:
include/libcamera/ipa/core_ipa_interface.h:24:1: error: 'IPACameraSensorInfo' defined as a struct here but previously declared as a class; this is valid, but may result in linker errors under the Microsoft C++ ABI [-Werror,-Wmismatched-tags]
struct IPACameraSensorInfo
^
../../src/ipa/ipu3/ipu3_agc.h:21:1: note: did you mean struct here?
class IPACameraSensorInfo;
^~~~~
struct
Fix it.
Fixes: 384a53d3cdf7 ("ipa: ipu3: Calculate line duration from IPACameraSensorInfo")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Convert the core AGC and Lux controller code to use
utils::Duration for all exposure time related variables and
calculations.
Convert the exposure/shutter time fields in AgcStatus and DeviceStatus
to use utils::Duration.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the AgcAlgorithm API functions to use utils::Duration for all
time based variables.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the ipa and cam_helper code to use libcamera::utils::Duration for
all time based variables. This improves code readability and avoids
possible errors when converting between time bases.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Frame duration is hard-coded for CTS as per [1]. Ideally, to accurately
calculate the frame duration, it needs the VBLANK value from every
frame's exposure. However, this particular bit is yet to be implemented
in IPAIPU3.
Meanwhile, we can at least head in the right direction by not hard
coding the value, instead using the default VBLANK value as reported
by the sensor. Update the existing \todo, to use the derived VBLANK
value as and when it's available from each frame exposure.
[1] 6c5f3fe6ced7 ("ipa: ipu3: Set output frame duration metadata")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
IPACameraSensorInfo members will be needed at various places in the
IPAIPU3 class, in subsequent commits. Hence, it seems trivial to copy
this structure for wider availability throughout the class.
This commit does not introduce any functional changes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Squash \todo by calculating line duration from IPACameraSensorInfo,
now passed in, to IPU3Agc::initialise().
Since line duration is now calculated from real values, store it as a
private member in IPU3Agc class. As a further step, replace the
associated global constant, kMaxExposureTime, with a private IPU3Agc
class member as well, and assign its value correspondingly in
IPU3Agc::initialise(), similar to previous precedence.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
A custom gamma LUT is used, but the table is not calculated at startup,
resulting in an all 0's frame.
Use the drfault LUT specified in the Linux kernel as a first estimation.
Reported-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The sensor frame duration should be set by the IPA. Hardcode it for now.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
We need a separate control to report the nominal frame duration, but
it's also useful to report the min/max frame duration values that will
be used. Split the FrameDurations control into FrameDuration and
FrameDurationLimits respectively to support both of these.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass in frame timestamps from IPU3 pipeline handler to IPU3 IPA via
IPU3Event. Frame timestamps are helpful to IPA algorithms to
convergence, by setting them via IPA stats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There can be multiple IPAs per pipeline-handler or platform.
They can live in-tree or externally linked. It is up to the vendor
whether to use in-tree IPA for a platform or provide it externally.
In the case of IPAs being external, building in-tree IPAs might be
futile hence, provide a clear and explicit mechanism to choose whether
to build the in-tree IPA for the platform or not.
By default, all in-tree IPAs are built when a matching Pipeline handler
is also enabled.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAConfigInfo is a consolidated data structure passed from IPU3
pipeline-handler to IPU3 IPA. The structure can be extended with
additional parameters to accommodate the requirements of multiple
IPU3 IPA modules.
Adapt the in-tree IPU3 IPA to use IPAConfigInfo as well.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This matches the naming convention for IPA IPC.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraSensorInfo structure is designed to pass in camera sensor related
information from pipeline-handler to IPA. Since the pipeline-handler
and IPA are connected via mojom IPC IPA interface, the interface
itself provides a more suitable placement of CameraSensorInfo,
instead of camera_sensor.h (which is a libcamera internal header
ultimately, at this point).
As CameraSensorInfo is already defined in core.mojom, it is just
a matter of removing [skipHeader] tag to allow code-generation
of CameraSensorInfo.
Finally, update header paths to include CameraSensorInfo definition
from IPA interfaces instead of "libcamera/internal/camera_sensor.h".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since meson v0.49.0, join_paths() is equivalent to '/' hence,
drop and replace it with '/' short-hand in meson files.
This commit does not introduce any functional changes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The controller algorithms currently run on every frame provided to the
IPA by the pipeline handler. This may be undesirable for very fast fps
operating modes where it could significantly increase the computation
cycles (per unit time) without providing any significant changes to the
IQ parameters. The added latencies could also cause dropped frames.
Pass the FrameBuffer timestamp to the IPA through the controls. This
timestamp will be used to rate-limit the controller algorithms to run
with a minimum inter-frame time given by a compile time constant,
currently set to 16.66ms. On startup, we don't rate-limit the algorithms
until after the number of frames required for convergence.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new Merge method to the Metadata class. This will merge all unique
key/value pairs from a source metadata map to the destination map.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
