summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2024-05-08ipa: libipa: Add AgcMeanLuminance base classDaniel Scally
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in very large part; following the Rpi IPA's algorithm in spirit with a few tunable values in that IPA being hardcoded in the libipa ones. Add a new base class for AgcMeanLuminance which implements the same algorithm and additionally parses yaml tuning files to inform an IPA module's Agc algorithm about valid constraint and exposure modes and their associated bounds. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add ExposureModeHelperPaul Elder
Add a helper for managing exposure modes and splitting exposure times into shutter and gain values. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Allow creation of empty HistogramDaniel Scally
For convenience's sake allow the creation of empty Histograms so they can be embedded within other Classes and filled out with data at some later point in time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX415 sensor propertiesAlexander Stein
Provide the Sony IMX415 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX415 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX335 sensor propertiesKieran Bingham
Provide the Sony IMX335 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX335 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX283 sensor propertiesKieran Bingham
Provide the IMX283 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX283 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-04-16libcamera: software_isp: Apply black level compensationMilan Zamazal
Black may not be represented as 0 pixel value for given hardware, it may be higher. If this is not compensated then various problems may occur such as low contrast or suboptimal exposure. The black pixel value can be either retrieved from a tuning file for the given hardware, or automatically on the fly. The former is the right and correct method, while the latter can be used when a tuning file is not available for the given hardware. Since there is currently no support for tuning files in software ISP, the automatic, hardware independent way, is always used. Support for tuning files should be added in future but it will require more work than this patch. The patch looks at the image histogram and assumes that black starts when pixel values start occurring on the left. A certain amount of the darkest pixels is ignored; it doesn't matter whether they represent various kinds of noise or are real, they are better to omit in any case to make the image looking better. It also doesn't matter whether the darkest pixels occur around the supposed black level or are spread between 0 and the black level, the difference is not important. An arbitrary threshold of 2% darkest pixels is applied; there is no magic about that value. The patch assumes that the black values for different colors are the same and doesn't attempt any other non-primitive enhancements. It cannot completely replace tuning files and simplicity, while providing visible benefit, is its goal. Anything more sophisticated is left for future patches. A possible cheap enhancement, if needed, could be setting exposure + gain to minimum values temporarily, before setting the black level. In theory, the black level should be fixed but it may not be reached in all images. For this reason, the patch updates black level only if the observed value is lower than the current one; it should be never increased. The purpose of the patch is to compensate for hardware properties. General image contrast enhancements are out of scope of this patch. Stats are still gathered as an uncorrected histogram, to avoid any confusion and to represent the raw image data. Exposure must be determined after the black level correction -- it has no influence on the sub-black area and must be correct after applying the black level correction. The granularity of the histogram is increased from 16 to 64 to provide a better precision (there is no theory behind either of those numbers). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: ipa: Add Soft IPAAndrey Konovalov
Define the Soft IPA main and event interfaces, add the Soft IPA implementation. The current src/ipa/meson.build assumes the IPA name to match the pipeline name. For this reason "-Dipas=simple" is used for the Soft IPA module. Auto exposure/gain and AWB implementation by Dennis, Toon and Martti. Auto exposure/gain targets a Mean Sample Value of 2.5 following the MSV calculation algorithm from: https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf Use CameraSensorHelper to convert the analogue gain code read from the camera sensor into real analogue gain value. In the future this makes it possible to use faster AE/AGC algorithm. Right now the CameraSensorHelper lets us use the full range of analogue gain values. If there is no CameraSensorHelper for the camera sensor in use, a warning log message is printed. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Marttico <g.martti@gmail.com> Signed-off-by: Marttico <g.martti@gmail.com> Co-developed-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-03-06ipa: rpi: cam_helper: Extend embedded data parsing to RAW14 modesNick Hollinghurst
Fix embedded data byte-skipping for 14-bit modes (4 out of 7 bytes carry register data), and allow 14-bit modes in IMX708 PDAF parsing. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-02-27libcamera: Use utils::to_underlying()Laurent Pinchart
Replace manual implementations of the utils::to_underlying() helper with calls to the function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2024-02-23ipa: rkisp1: Support the i.MX8MP ISP versionPaul Elder
Handle the RKISP1_V_IMX8MP version in the rkisp1 IPA. This enables basic support of the i.MX8MP, excluding the processing blocks specific to the new ISP version. Those will be supported later. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: Fix histogram weights configurationLaurent Pinchart
The histogram weights are initialized to hardcoded 1's for each histogram grid cell. The code uses the wrong variable for the grid size, resulting in some weights having a 0 value. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: Store hardware parameters in IPA contextLaurent Pinchart
Versions of the ISP differ in the processing blocks they include, as well as in the implementation of some of those blocks. In particular, they have different numbers of histogram bins oe AE statistics cells. The algorithms take these differences into account by checking the ISP version reported by the driver. These checks are currently scattered in multiple places. Centralize them in the IPARkISP1::init() function, and store the version-dependent hardware parameters in the IPA context, accessible by all algorithms. While at it, drop the IPASessionConfiguration::hw member that stores the revision number, unused by the algorithms. It can be added back laer to the IPAHwSettings structure if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: agc: Wrap variable length C arrays in spansLaurent Pinchart
The RkISP1 statistics structure contains multiple arrays whose length varies depending on the hardware revision. Accessing those arrays is error-prone, wrap them in spans at the top level to reduce risks of out-of-bound accesses. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-01-12libipa: camera_sensor_helper: Mark createInstance() with overrideLaurent Pinchart
The CameraSensorHelperFactory::createInstance() function overrides a virtual function from CameraSensorHelperFactoryBase. The function declaration doesn't mark it with the override keyword. This could cause issues in the future if the base class' function changes, as the compiler will not issue any warning in that case. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: data: Update tuning files for HDRDavid Plowman
All the Raspberry Pi official camera tuning files are updated for HDR. As stated previously, there is no mechanism in the hardware for combining images so all this does is enable multi-channel AGC to produce short and long exposure frames. It will be up to the application to deal with them. The changes are identical in every tuning file. 1. The existing AGC tuning is duplicated twice so that we have 3 AGC channels. 2. The first is left alone (the default AGC channel), the second is tweaked to under-expose significantly (ev -3) and the final one is tweaked to over-exposure slightly (ev +0.5) 3. Control parameters are provided to the "rpi.hdr" algorithm to associate these AGC channels correctly with the HDR modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Implement HDR controlDavid Plowman
Sufficient plumbing is added so that the HDR mode control can be used to engage HDR modes on platforms that support them. On the vc4 platform, this allows multi-channel AGC to run, though there is no image merging. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: vc4: Add OV64A40 tuning filesLee Jackson
Provide the OV64A40 tuning files for the Arducam Omnivision camera module to operate on the VC4 ISP architecture on Raspberry Pi 4 and below. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09libipa: camera_sensor_helper: Add OV64A40 helperJacopo Mondi
Add a CameraSensorHelper for the OV64A40 camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Provide a Camera Helper for the OV64A40Jacopo Mondi
Support the OV64A40 sensor with a camera helper to manage the gain model, light sensitivity, and control delays. Signed-off-by: Lee Jackson <lee.jackson@arducam.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: vc4: Implement the StatsOutputEnable vendor controlNaushir Patuck
Implement the StatsOutputEnable control for the VC4 IPA. When set, this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput metadata control. To get this working, IpaBase::libcameraMetadata_ is moved from a private to a protected member variable. This makes it accessable to the VC4 derived IPA class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: awb: Add an initialValues methodDavid Plowman
This allows the IPA to get reasonable default colour gains before AWB has run. This is particularly important on the PiSP platform where these numbers are helpful in programming the Front End statistics block in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: black_level: Add an initialValues methodDavid Plowman
This allows the IPA to discover the correct black level values even before any frames have been processed. This is important on the PiSP platform where the front end black level blocks must be programmed in advance. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-09ipa: rpi: Allow the mean of an empty histogram intervalNick Hollinghurst
Don't assert when taking the weighted mean of a zero-width or zero-weight interval; return its upper bound. That is certainly correct in the zero-width case, and plausible otherwise. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-01-05ipa: rpi: Add hardware line rate constraintsNaushir Patuck
Advertise hardware constraints on the pixel processing rate through the Controller::HardwareConfig structure. When calculating the minimum line length during a configure() operation, ensure that we don't exceed this constraint. If we do exceed the hardware constraints, increase the modes's minimum line length so the pixel processing rate falls below the hardware limit. If this is not possible, throw a loud error message in the logs. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-12-07meson: Tag all installed filesLaurent Pinchart
Meson uses tags to sort installed files in categories, and makes it possible to install a subset of the files using the '--tags' argument to 'meson install'. This is typically used by distributions to split the runtime, development and documentation files into separate packages. By default, meson tries to guess the correct tag for installed files, but can't always do so properly. Mark the install targets that meson can't guess with the correct install_tag. As the feature has been introduced in meson 0.60, bump the minimum meson version. The latest LTS release of all major distributions that libcamera currently targets ship a recent enough meson version. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-11-30ipa: rpi: cac: Minor code improvements and tidyingDavid Plowman
We make a few small improvements to the code: * The arrayToSet method is prevented from overwriting the end of the array if there are too many values in the input table. If you supply a table, it will force you to put the correct number of elements in it. * The arrayToSet and setStrength member functions are turned into static functions. (There may be a different public setStrength member function in future.) * When no tables at all are given, the configuration is flagged as being disabled, so that we can avoid copying tables full of zeroes around. As a consequence, the pipeline handler too will disable this hardware block rather than run it needlessly. (Note that the tuning tool will put in a completely empty "rpi.cac" block if no CAC tuning images are supplied, benefiting from this behaviour.) * The initialise member function is removed as it does nothing. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30ipa: rpi: agc: Fix bug where AeLocked was never getting setDavid Plowman
The recent change where time-filtering is done before sorting out the digital gain means that the target exposure without digital gain is no longer set, breaking the 'AeLocked' calculation. We can use the regular (full) target exposure instead. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain") Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-30libcamera: controls: Use vendor tags for draft controls and propertiesNaushir Patuck
Label draft controls and properties through the "draft" vendor tag and deprecate the existing "draft: true" mechanism. This uses the new vendor tags mechanism to place draft controls in the same libcamera::controls::draft namespace and provide a defined control id range for these controls. This requires moving all draft controls from control_ids.yaml to control_ids_draft.yaml. One breaking change in this commit is that draft control ids also move to the libcamera::controls::draft namespace from the existing libcamera::controls namespace. This is desirable to avoid API breakages when adding new libcamera controls. So, for example, the use of controls::NOISE_REDUCTION_MODE will need to be replaced with controls::draft::NOISE_REDUCTION_MODE. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-11-22ipa: rpi: alsc: Do not allow zero colour ratio statisticsDavid Plowman
The algorithm computes R/G and B/G colour ratio statistics which we should not allow to go to zero because there is clearly no gain you could apply to R or B to equalise them. Instead flag such regions as having "insufficient data" in the normal manner. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-10-24ipa: rpi: agc: Make AGC controls affect all channelsDavid Plowman
We need to be able to do things like enable/disable AGC for all the channels, so most of the AGC controls are updated to be applied to all channels. There are a couple of exceptions, such as setting explicit shutter/gain values, which apply only to channel 0. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: agc: Fetch AWB status in the prepare methodDavid Plowman
AWB writes this out during prepare, so we may as well read it in AGC prepare as well. Reading it in process is wrong on the PiSP platform because process runs before prepare, so the AWB status won't be there (on vc4 it made no difference). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: vc4: Move denoise control handling into the VC4 derived IPANaushir Patuck
Since noise control handling differs between the VC4 and PiSP IPAs, move the current denoise control handler from ipa base into the vc4 IPA derived class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: agc: Allow AGC channels to avoid using "fast desaturation"David Plowman
"Fast desaturation" is a technique that can help the AGC algorithm to desaturate images more quickly when they are very over-exposed. However, it uses digital gain to do this which can confuse our HDR techniques. Therefore make it optional. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: alsc: Do not re-read the alsc.status metadataDavid Plowman
This was being re-read in order to determine what LSC gains had been applied. We can just retrieve these numbers from the prevAsyncResults_ instead. This will also enable other future algorithms to manipulate the LSC tables in the alsc.status, without it breaking the core ALSC algorithm here. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-24ipa: rpi: hdr: Add the ability to alter the LSC tableDavid Plowman
We can perform some of the local contrast adjustment using global gains in the LSC table. We can vary the amount of gain according to the measured brightness of that image region. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: When AGC channels are changed, start with the 1st channelNaushir Patuck
Whenever the AGC active channels are changed, start with the first channel listed. This allows applications to rely on a particular channel being generated first. For example, multi-exposure HDR always wants the short channel first. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Avoid overwriting caller's statistics pointerDavid Plowman
The code was inadvertently overwriting the caller's StatisticsPtr, meaning that subsequent algorithms would get the wrong image statistics when AGC channels changed. This could be fix using std::ref, though I find the C-style pointer fix easier to understand! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: denoise: Support different denoise configurationsDavid Plowman
Some use cases may require stronger, or different, denosie settings to others. For example, the way frames are accumulated during single exposure HDR means that we may want stronger denoise. This commit adds such support for different configurations that can be defined in the tuning file. Older tuning files, or files where there is only a single configuration, load only the "normal" denoise configuration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: contrast: Allow adaptive contrast enhancement to be disabledDavid Plowman
The enableCe() function enables or disables adaptive contrast enhancement and the restoreCe() function sets it back to its normal state (which is what was read from the tuning file). In future, algorithms like HDR might want to take over tonemapping functions, so any dynamic behaviour here would upset them. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: agc: Add an AGC stable regionDavid Plowman
Add a small "stable region" parameter (defaulting to 2%) within which the AGC will not adjust the exposure it requests. It allows applications to configure the AGC to avoid continual micro-adjustments of exposure values if they are somehow sensitive to it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add new algorithms for PiSPNaushir Patuck
Add new CAC, HDR, Saturation and Tonemapping algorithms. Add a new Denoise algorithm that handles spatial/temporal/colour denoise through one interface. With this change, the old SDN algorithm is now considered deprecated and a warning message will be displayed if it is enabled. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare AWB for PiSP supportNaushir Patuck
Prepare the AWB algorithm to support the PiSP hardware. The key change is to factor in the LS correction in the AWB zone statistics. This is different from VC4 where the LS correction happens before statistics gathering. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Prepare ALSC for PiSP supportNaushir Patuck
Prepare the ALSC algorithm to support the PiSP hardware. The key change is to avoid factoring out the WB correction in the AWB zone statistics. Add the ALSC correction to the global metadata so that AWB can use it to factor the gains back in for the AWB calculations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add PiSP definitions to the Controller hardware descriptionNaushir Patuck
Add an entry to Controller::HardwareConfig describing the PiSP hardware for the IPA and controller algorithms to use. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add statsInline to the Controller hardware descriptionNaushir Patuck
Add a new boolean field (statsInline) to Controller::HardwareConfigMap. This field indicates where the statistics are generated in the hardware ISP pipeline. For statsInline == true, statistics are generated before the frame is processed (e.g. the PiSP case), and statsInline == false indicates statistics are generated after the frame is processed (e.g. the VC4 case). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add try_lock() to RPiController::MetadataNaushir Patuck
Add the missing try_lock() member function to RPiController::Metadata. This will allow RPiController::Metadata to be used as a template parameter in std::scoped_lock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18mojom: pipeline: ipa: rpi: Add fields for PiSP objectsNaushir Patuck
Add the PiSP Frontend and Backend SharedMemObject file descriptors to the ipa::init() call. This will allow the pipeline handler to pass these objects to the IPA after construction. Add a flag to indicate if buffer swaps are needed when starting the ISP for the stitch block. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-18ipa: rpi: Add IpaBase::platformStart() member functionNaushir Patuck
Add a virtual IpaBase::platformStart() member function that is called at the end of IpaBase::start(). For the IpaVc4 derived class, this function does nothing, but will be used in the PiSP derived class to reset internal state on startup. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-05ipa: rpi: Avoid skipping IPAs on the first frame after the drop framesDavid Plowman
We avoid skipping the IPAs while frameCount_ is less than dropFrameCount_, indicating that these frames will not be sent to the application. This means that when these numbers are equal then this is the first frame the application will get, so again, we must avoid skipping the IPAs. Consequently the test here must avoid the case of equality. Fixes: 51533fecae8d ("ipa: rpi: Fix frame count logic when running algorithms") Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>