summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2020-06-25ipa: rpi: Add "focus" algorithmDavid Plowman
Adds FocusStatus to the image metadata, containing contrast measurements across the image. Optionally also prints a contrast measure to the console, to aid in manual adjustment of the lens. Note that it is not an actual auto-focus algorithm that can drive a lens! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Plumb in the libcamera sharpness controlDavid Plowman
This simply wires up the libcamera sharpness control in the Raspberry Pi IPAs so that it controls the strength of the Raspberry Pi sharpness control algorithm. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Add sharpness strength controlDavid Plowman
The sharpness control is, loosely speaking, a gain applied to the amount of sharpening added to an image. We also report the sharpness setting used back to the caller in metadata. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Make sharpening mode_factor an ordinary doubleDavid Plowman
No need for it to be std::atomic as SwitchMode runs synchronously with Prepare. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Recalculate camera exposure/gain when camera ↵David Plowman
mode changes This commit causes the AGC to recalculate its camera exposure/gain values when the camera mode changes. For example it's possible that the exposure profile could be changed by the application so the division between exposure time and analogue gain may be different. The other underlying reason (and which this commit accomplishes too) is that the sensor's line timing may change in a new mode, and because V4L2 drivers store a number of exposure _lines_, the resulting _time_ will "change under our feet". So we have to go through the process of recalculating the correct number of lines and writing this back to the sensor with every mode switch, regardless of anything else. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Allow SwitchMode method to return camera settingsDavid Plowman
This commit adds a Metadata parameter to the SwitchMode method enabling it to return camera and other settings to the caller (usually the configure method, just after the camera mode has been selected). In future this will allow the Raspberry Pi IPAs to take those settings (such as exposure and analogue gain) and program them directly into the camera or ISP before the camera is even started. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09libcamera: Add missing SPDX headers to miscellaneous small filesLaurent Pinchart
Add missing SPDX headers to miscellaneous small files. Use CC0-1.0 for meson.build, .gitignore and the small include/linux/README, and licenses matching the corresponding component for other files. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-16libcamera: Move IPA headers from include/ipa/ to include/libcamera/ipa/Laurent Pinchart
The IPA headers are installed into $prefix/include/libcamera/ipa/, but are located in the source tree in include/ipa/. This requires files within libcamera to include them with #include <ipa/foo.h> while a third party IPA would need to use #include <libcamera/ipa/foo.h> Not only is this inconsistent, it can create issues later if IPA headers need to include each other, as the first form of include directive wouldn't be valid once the headers are installed. Fix the problem by moving the IPA headers to include/libcamera/ipa/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move internal headers to include/libcamera/internal/Laurent Pinchart
The libcamera internal headers are located in src/libcamera/include/. The directory is added to the compiler headers search path with a meson include_directories() directive, and internal headers are included with (e.g. for the internal semaphore.h header) #include "semaphore.h" All was well, until libcxx decided to implement the C++20 synchronization library. The __threading_support header gained a #include <semaphore.h> to include the pthread's semaphore support. As include_directories() adds src/libcamera/include/ to the compiler search path with -I, the internal semaphore.h is included instead of the pthread version. Needless to say, the compiler isn't happy. Three options have been considered to fix this issue: - Use -iquote instead of -I. The -iquote option instructs gcc to only consider the header search path for headers included with the "" version. Meson unfortunately doesn't support this option. - Rename the internal semaphore.h header. This was deemed to be the beginning of a long whack-a-mole game, where namespace clashes with system libraries would appear over time (possibly dependent on particular system configurations) and would need to be constantly fixed. - Move the internal headers to another directory to create a unique namespace through path components. This causes lots of churn in all the existing source files through the all project. The first option would be best, but isn't available to us due to missing support in meson. Even if -iquote support was added, we would need to fix the problem before a new version of meson containing the required support would be released. The third option is thus the only practical solution available. Bite the bullet, and do it, moving headers to include/libcamera/internal/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-13ipa: Only sign IPA modules that are being installedLaurent Pinchart
The ipa-sign-install.sh script, run when installing libcamera, signs all IPA modules present in the module directory. This would result in third-party modules being signed if any are present in the directory. Fix it by explicitly passing the list of IPA modules to the ipa-sign-install.sh script. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org>
2020-05-13licenses: License all meson files under CC0-1.0Laurent Pinchart
In an attempt to clarify the license terms of all files in the libcamera project, the build system files deserve particular attention. While they describe how the binaries are created, they are not themselves transformed into any part of binary distributions of the software, and thus don't influence the copyright on the binary packages. They are however subject to copyright, and thus influence the distribution terms of the source packages. Most of the meson.build files would not meet the threshold of originality criteria required for copyright protection. Some of the more complex meson.build files may be eligible for copyright protection. To avoid any ambiguity and uncertainty, state our intent to not assert copyrights on the build system files by putting them in the public domain with the CC0-1.0 license. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Show Liu <show.liu@linaro.org>
2020-05-11libcamera: raspberrypi: Add components to meson buildNaushir Patuck
Add the Raspberry Pi pipeline handler and IPA as targets in the meson build system. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-11libcamera: ipa: Raspberry Pi IPANaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and associated libraries. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-11meson: Use files() instead of find_program() for internal scriptsLaurent Pinchart
Using find_program() to locate scripts part of the source tree causes meson to print messages at setup time for each of those scripts: Program ipa-sign.sh found: YES (/home/user/src/libcamera/src/ipa/ipa-sign.sh) This pollutes the meson setup log with useless messages, as we know the scripts are present. Use files() instead to avoid this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-30libcamera: Build IPA module signatures by defaultLaurent Pinchart
Commit 7206035ee609 ("libcamera: Regenerate IPA module signatures at install time") replaced installation of the IPA module signatures with an install script that signs all modules. While doing so, it inadvertently also disabled generation of the signature at build time by default. This breaks running libcamera binaries from the build directory. Fix it. Fixes: 7206035ee609 ("libcamera: Regenerate IPA module signatures at install time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-04-29libcamera: Regenerate IPA module signatures at install timeLaurent Pinchart
When the IPA modules are installed, meson strips the DT_RPATH and DT_RUNPATH from the binaries. This invalidates the signatures. Disable installation of the .sign files and add an installation script to regenerate them directly in the target directory. The .sign files still need to be created at build time to support running IPA modules from the build tree. Two alternative approaches have been considered: - meson could be taught a new target argument to preserve binary compatibility by skipping any operation that modifies files. This has been proposed in the #mesonbuild IRC channel. While this could be interesting in the longer term, we need to fix the issue now. - The module signatures could be computed on selected sections only. While skipping the .dynamic section when signing may not cause security issues, it would make signature generation and verification more complex, and wasn't deemed worth it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28libcamera: ipa: Add support for CameraSensorInfoJacopo Mondi
Add support for camera sensor information in the libcamera IPA protocol. Define a new 'struct ipa_sensor_info' structure in the IPA context and use it to perform translation between the C and the C++ API. Update the IPAInterface::configure() operation to accept a new CameraSensorInfo parameter and port all users of that function to the new interface. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28ipa: vimc: Validate configuration file in init()Laurent Pinchart
Make sure we can open the configuration file passed to the init() function, and return an error otherwise. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: vimc: Add a dummy configuration file to the vimc IPALaurent Pinchart
The file will be used to test the corresponding APIs. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: Pass IPA initialization settings to IPAInterface::init()Laurent Pinchart
Add a new IPASettings class to pass IPA initialization settings through the IPAInterface::init() method. The settings currently only contain the name of a configuration file, and are expected to be extended later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28libcamera: ipa_proxy: Provide suport for IPA configuration filesLaurent Pinchart
IPA modules may require configuration files, which may be stored in different locations in the file system. To standardize file locations between all IPAs and pipeline handlers, provide a helper function to locate a configuration file by searching in the following directories: - All directories specified in the LIBCAMERA_IPA_CONFIG_PATH environment variable ; or - In the source tree if libcamera is not installed ; otherwise - In standard system locations (etc and share directories). When stored in the source tree, configuration files shall be located in a 'data' subdirectory of their respective IPA directory. More locations, or extensions to the mechanism, may be implemented later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-28ipa: Name IPA modules after their source directoryLaurent Pinchart
The IPAModuleInfo::name field is currently a free-formed string that has little use. Tighten its usage rules to make it suitable for building file system paths to IPA-specific resources by matching the directory name of the IPA module. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-16libcamera: Make IPA module signing optionalLaurent Pinchart
The IPA module signing mechanism relies on openssl to generate keys and sign the module. If openssl is not found on the system, the build will fail. Make the dependency optional by detecting openssl, and skip generation of signatures if openssl isn't found. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-04-14libcamera: ipa: Remove IPAModuleInfo license fieldLaurent Pinchart
The IPAModuleInfo license field isn't needed anymore now that modules are cryptographically signed. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-04-14libcamera: Add IPA module signing infrastructureLaurent Pinchart
Add infrastructure to generate an RSA private key and sign IPA modules. The signatures are stored in separate files with a .sign suffix. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-04-14ipa: vimc: Remove isolated VIMC IPA moduleLaurent Pinchart
The isolated VIMC module isn't used in any test. Remove it to prepare for the rework of IPA module isolation. The feature can be added back later alongside corresponding tests if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-04-14ipa: Add start() and stop() operationsNiklas Söderlund
Add two new operations to the IPA interface to start and stop it. The intention is that these functions shall be used by the IPA to perform actions when the camera is started and stopped. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-03-25libcamera: Make pipeline handlers selectable at compile timeLaurent Pinchart
Add a 'pipelines' project option that specifies which pipeline handlers to compile in. The corresponding IPA modules are automatically selected. The default is to compile all pipeline handlers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-03-25ipa: Move vimc to a subdirectoryLaurent Pinchart
Give a subdirectory to all IPA modules to make the structure of the source tree more consistent. This will also simplify the implementation of IPA module selection at build time. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-14libcamera: Switch from utils::make_unique to std::make_uniqueLaurent Pinchart
Now that we're using C++-14, drop utils::make_unique for std::make_unique. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-14meson.build: Switch to C++14Laurent Pinchart
C++14 is a minor release that doesn't introduce major new concepts or paradigms compared to C++11, but brings two useful changes for us: - std::make_unique allows dropping our custom implementation in utils. - Functions returning constexpr are not assumed to be const anymore, which is needed to create a standard-conformant span implementation. All the g++ and clang++ versions we support and test (g++-5 onwards and clang++6 onwards) support C++14. However, due to a defect in the original C++14 specification, solved in N4387 ([1]), compilation would fail on g++-5 due to the use of std::map::emplace() with a non-copyable value type. It turns out we can easily fix it by switching to the explicit piecewise emplace() overload. There is thus really nothing holding back the switch. Let's do it, and update the coding style accordingly. [1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4387 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-12ipa: Switch to FrameBuffer interfaceNiklas Söderlund
Switch the IPA interfaces and implementations to use the Framebuffer interface. - The IPA interface is switched to use the simpler FrameBuffer::Plane container when carrying dmabuf descriptions (fd and length) over the pipeline/IPA boundary. - The RkISP1 IPA implementation takes advantage of the new simpler and safer (better control over file descriptors) FrameBuffer interface. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-20ipa: Allow short-circuiting the ipa_context_opsLaurent Pinchart
When an IPA module is loaded without isolation and implements the IPAInterface internally, going through ipa_context_ops is a waste of time. Add an operation to retrieve the IPAInterface, and use it directly in the IPAContextWrapper. For debugging purpose, make it possible to forcing usage of the C API by defining the LIBCAMERA_IPA_FORCE_C_API environment variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-11-20ipa: Switch to the plain C APIJacopo Mondi
Switch IPA communication to the plain C API. As the IPAInterface class is easier to use for pipeline handlers than a plain C API, retain it and add an IPAContextWrapper that translate between the C++ and the C APIs. On the IPA module side usage of IPAInterface may be desired for IPAs implemented in C++ that want to link to libcamera. For those IPAs, a new IPAInterfaceWrapper helper class is introduced to wrap the IPAInterface implemented internally by the IPA module into an ipa_context, ipa_context_ops and ipa_callback_ops. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-11-20ipa: Pass ControlInfoMap references to IPAInterface::configure()Laurent Pinchart
The IPAInterface::configure() operation receives a map of ControlInfoMap instances. Pass const references instead to avoid copies when not required (the callee can still make manual copies), and to allow for the future serialization layer to keep references to the original object. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-11-08libcamera: Remove unneeded semicolonsLaurent Pinchart
Comply with the coding style by removing lots of unneeded semicolons. Fix a few other coding style violations on the lines touched by those fixes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-10-23libcamera: Standardise on C compatibility headersLaurent Pinchart
Now that our usage of C compatibility header is documented, use them consistently through the source code. While at it, group the C and C++ include statements as defined in the coding style, and fix a handful of #include ordering issues. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-15libcamera: v4l2_controls: Remove V4L2ControlList classLaurent Pinchart
The V4L2ControlList class only provides a convenience constructor for the ControlList, which can easily be moved to the ControlList class and may benefit it later (to construct a ControlList from controls supported by a camera). Move the constructor and remove V4L2ControlList. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-10-15libcamera: controls: Merge ControlInfoMap and V4L2ControlInfoMapLaurent Pinchart
The ControlInfoMap and V4L2ControlInfoMap classes are very similar, with the latter adding convenience accessors based on numerical IDs for the former, as well as a cached idmap. Both features can be useful for ControlInfoMap in the context of serialisation, and merging the two classes will further simplify the IPA API. Import all the features of V4L2ControlInfoMap into ControlInfoMap, turning the latter into a real class. A few new constructors and assignment operators are added for completeness. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-10-15libcamera: v4l2_controls: Replace V4L2ControlInfo with V4L2ControlRangeLaurent Pinchart
The V4L2ControlInfo class only stores a ControlRange. Make it inherit from ControlRange to provide a convenience constructor from a struct v4l2_query_ext_ctrl and rename it to V4L2ControlRange. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-10-13libcamera: ipa: Merge controls and v4l2controls in IPAOperationDataLaurent Pinchart
Now that the V4L2ControlList is merely a helper to construct a ControlList for V4L2 controls, without any data member, all controls can be transferred between pipeline handlers and IPAs using ControlList only. Remove the v4l2controls member for IPAOperationData and use the control member instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-13libcamera: v4l2_device: Replace V4L2ControlList with ControlListLaurent Pinchart
The V4L2Device class uses V4L2ControlList as a controls container for the getControls() and setControls() operations. Having a distinct container from ControlList will makes the IPA API more complex, as it needs to explicitly transport both types of lists. This will become even more painful when implementing serialisation and deserialisation. To simplify the IPA API and ease the implementation of serialisation and deserialisation, replace usage of V4L2ControlList with ControlList in the V4L2Device (and thus CameraSensor) API. The V4L2ControlList class becomes a thin wrapper around ControlList that slightly simplifies the creation of control lists for V4L2 controls, and may be removed in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-13libcamera: controls: Support accessing controls by numerical IDLaurent Pinchart
The ControlList class has template get() and set() methods to get and set control values. The methods require a reference to a Control instance, which is only available when calling them with a hardcoded control. In order to support usage of ControlList for V4L2 controls, as well as serialisation and deserialisation of ControlList, we need a way to get and set control values based on a control numerical ID. Add new contains(), get() and set() overload methods to do so. As this change prepares the ControlList to be used for other objects than camera, update its documentation accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-13libcamera: controls: Default ControlList validator argument to nullptrLaurent Pinchart
The ControlList constructor takes a validator pointer that can be null. Set its default value to nullptr to simplify code in users of ControlList. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-11ipa: rkisp1: Avoid unnecessary copyLaurent Pinchart
Use const references in a for loop to avoid an unnecessary copy. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-10-11libcamera: ipa: rkisp1: Add basic control of auto exposureNiklas Söderlund
Add an IPA which controls the exposure time and analog gain for a sensor connected to the rkisp1 pipeline. The IPA supports turning AE on and off and informing the camera of the status of the AE control loop. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-10-11libcamera: ipa: Extend to support IPA interactionsNiklas Söderlund
The IPA interface needs to support interactions with the pipeline; add interfaces to control the sensor and handling of request ISP parameters and statistics. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-10-08ipa: vimc: Add support for tracing operationsJacopo Mondi
Add support to the dummy VIMC IPA for tracing operation by using a FIFO channel that will be used by the IPA Interface test to verify communications with the IPA. At the moment only add support for the init() operation as it's the only defined one. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-10-08ipa: meson: Give IPAs access to internal libcamera APIsJacopo Mondi
Open source IPA implementations can benefit from usage of libcamera internal APIs. Allow this by compiling against the internal headers and linking against libcamera. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-10-08ipa: vimc: Rename ipa_dummy to ipa_vimcJacopo Mondi
The DummyIPA is actually a test IPA module for the virtual media controller driver VIMC. Rename it accordingly to its usage. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>