summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2024-07-24ipa: rkisp1: ccm: Fix ccm metadata outputStefan Klug
Only the first three entries of the matrix were set. Fix that. Fixes: cbfdfa42cacc ("ipa: rkisp1: algorithms: Add crosstalk algorithm") Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-24ipa: rkisp1: awb: Unconditionally fill metadataStefan Klug
When the colour temperature estimation gets skipped, the metadata isn't populated. Fix that by filling the metadata early in the function. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-24ipa rkisp1: Remove temperatureK from FrameContextStefan Klug
The frame context is used to store data used for processing that frame. It is later used to either act as input for other algorithms or to fill the metadata. For the colour temperature this is not needed, as the meatadata shall not contain the value that was active when the image was processed, but the value that was calculated based on the statistics for that image. This is no functional change. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-24ipa: rkisp1: awb: Clamp gains to machine limitsStefan Klug
When the color gains are set manually it is possible to specify a gain that wrapped the hardware limits. It would also be possible to further tune the floating point limits, but that is an error prone approach. So the limits are imposed on the integers, just before writing to the hardware. This noticeably reduces some oscillations in the awb regulation. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-24libipa: camera_sensor_helper: Add OV5675 black levelDaniel Semkowicz
Add black level value for OV5675 camera sensor. According to datasheet, default value is 0x10, 10 bits width. However, Linux kernel driver initializes black level target value to 0x40. Set the value to the same as in kernel driver, but scaled to 16 bits. Signed-off-by: Daniel Semkowicz <dse@thaumatec.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-06ipa: rkisp1: Install all tuning filesRobert Mader
We have all these neat tuning files. Unfortunately we forgot to install many of them. Signed-off-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-07-04ipa: rkisp1: blc: Drop [[maybe_unused]] attributeLaurent Pinchart
The context parameter of the BlackLevelCorrection::init() function is used. Drop the [[maybe_unused]] attribute. Fixes: 50c28e135100 ("ipa: rkisp1: blc: Query black levels from camera sensor helper") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-03ipa: rkisp1: Move ov4689 and ov5640 black levels into sensor helpersStefan Klug
Move black levels for tuning files that contained a BLC block into the camera sensor helpers. ov4689.yaml had 66@12bit while the datasheet states 64@12bit. Use the value from the datasheet (scaled to 16bit). ov5640.yaml had 256@12bit while the datasheet states 16@10bit. Looking at the commit message the 256 most likely stems from the imx219 tuning file and 16@10bit is the same as the 64@12bit from the ov4689. This seems more likely and is therefore used. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-03ipa: rkisp1: data: Update tuning files for imx219 and imx258Stefan Klug
The black levels for imx219 and imx258 are now contained in the camera sensor helpers. Remove them from the tuning file for the imx219. Add a BLC entry to the imx258 tuning file. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-03ipa: rkisp1: blc: Report sensor black levels in metadataStefan Klug
Add sensor black levels to the metadata of the rkisp1 pipeline. Additionally enable raw support for this algorithm and add it to uncalibrated.yaml, so that black levels get reported when capturing tuning images. This is a bit of a hack, because no actual black level correction is taking place in raw mode, but it is the easiest way to get blacklevel reported for raw streams. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-03ipa: rkisp1: blc: Query black levels from camera sensor helperStefan Klug
As the camera sensor helper now has the ability to provide the black level, use it. Black levels can still be overwritten by the tuning file, but the direction is to remove them from the tuning files and move them into the sensor helpers. Additionally interpret all values based on 16bits. The conversion to the scale required by the hardware is done in process(). It ensures all the values inside libcamera are the same scale and is in preparation for the i.MX8MP where black levels are based on a 20bit scale. Note that this breaks existing tuning files. The tuning files distributed with libcamera will be fixed in a later patch. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-03ipa: rkisp1: Move camHelper into IPAContextStefan Klug
To be able to query the black levels, the black level correction algorithm needs access to the camera sensor helper. Allow this by moving the camHelper_ member from IPARkISP1 into IPAContext. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-03ipa: libipa: Add black levels to camera sensor helperStefan Klug
For a proper tuning process we need to know the sensor black levels. In most cases these are fixed and not reported by the kernel driver. Store them inside the sensor helpers for later retrieval by the algorithms. Add black level value corresponding to the data pedestal for three initial sensors as documented in the datasheets. More should be added, eventually filling the gaps for all supported sensors. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-28libcamera: Fix maybe-uninitialized errorStefan Klug
The gcc used in my current buildroot (Version 12.3) errors out with -Wmaybe-uninitialized. Fix that. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-06-26ipa: rpi: Define local functions in anonymous namespaceLaurent Pinchart
Multiple local functions are defined in the global namespace without the static keyword. This compiles fine for now, but will cause a missing declaration warning when we enable them. To prepare for that, move the function declaration to an anonymous namespace. While at it, for consistency, include an existing static function in the namespace and drop the static keyword. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2024-06-24ipa: libipa: matrix: Fix incorrect symbol namespaceLaurent Pinchart
The matrixVlidateYaml() function is declared in the libcamera::ipa:: namespace, but defined in the libcamera:: namespace. This causes a dynamic linking error at runtime. Fix it by moving the function definition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-24ipa: rkisp1: agc: Rename frame context update variable to updateMeteringLaurent Pinchart
The frame context agc.update variable is used to indicate if the ISP histogram metering parameters need to be updated. Rename it to updateMetering to make usage more explicit. Suggested-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-18ipa: libipa: pwl: Drop readYaml() functionLaurent Pinchart
All users of the Pwl::readYaml() function have been removed. The function is not used, and is deprecated in favour of YamlObject::get(). Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-18ipa: rpi: controller: Replace Pwl::readYaml() with YamlObject::get()Laurent Pinchart
Now that deserializing a Pwl object from YAML data is possible using the YamlObject::get() function, replace all usage of Pwl::readYaml() to prepare for its removal. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On Raspberry Pi 4
2024-06-17ipa: rkisp1: agc: Move AeEnable control to the AGC algorithmLaurent Pinchart
The AGC algorithm implements the AeEnable control at runtime. Move the declaration of the control from the IPA module to the algorithm. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Correctly clamp maximum shutter speedLaurent Pinchart
The sensor's maximum shutter speed is clamped by the maximum frame duration specified in requests. If the requested maximum frame duration is lower than the sensor's minimum shutter speed, the Agc::process() function will pass a minimum value higher than the maximum to the setLimits() function, resulting in an assertion failure. Fix it by clamping the value to both the lower and the upper bounds. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Rename maxShutterSpeed to maxFrameDurationLaurent Pinchart
The AGC active state and frame context both contain a variable named maxShutterSpeed. The variable is used to limit the maximum shutter speed when computing the exposure time and gains, but stores the maximum frame duration, not clamped by the sensor's maximum shutter speed. Rename it to maxFrameDuration. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Use mode from frame context to calculate new EVLaurent Pinchart
The effective exposure value for each frame is split into shutter time, analog gain and digital gain based on the AGC constraint mode and exposure mode. The algorithm uses the modes from the active state, which tracks the latest queued request, instead of the frame context, which tracks the value of the controls requested for that frame. Fix it by using the correct modes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Simplify predivider calculationLaurent Pinchart
The condition if (std::pow(std::floor(root), 2) < factor) predivider = static_cast<uint8_t>(std::ceil(root)); else predivider = static_cast<uint8_t>(std::floor(root)); can only be false when the factor's root is an integer. In that case, std::ceil(root) and std::floor(root) will be equal. The computation can thus be simplified by always rounding up. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Don't update histogram parameters unnecessarilyLaurent Pinchart
The ISP histogram parameters depends on the AE metering mode, but not on the other AE algorithm controls. The exposure mode, constraints mode and frame duration limits influence the behaviour of the algorithm, but not the histogram computation parameters. Update the histogram parameters only when AE metering mode changes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Make size argument to computeHistogramPredivider constLaurent Pinchart
The Agc::computeHistogramPredivider() function doesn't need to modify its size parameter. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: Document all AGC parameters in IPAFrameContextLaurent Pinchart
The IPAFrameContext AGC documentation is lagging behind the implementation and misses many variables. Document them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: rkisp1: Document all AGC parameters in IPAActiveStateLaurent Pinchart
The IPAActiveState AGC documentation is lagging behind the implementation and misses many variables. Document them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: libipa: agc_mean_luminance: Include missing headerLaurent Pinchart
agc_mean_luminance.h uses utils::Duration, include the corresponding header. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-06-17ipa: libipa: agc_mean_luminance: Fix enumerator namesLaurent Pinchart
Enumerators in libcamera start with an upper case letter. Fix the AgcConstraint::Bound enumerators. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-06-17ipa: rkisp1: agc: Fix initialization without metering modesLaurent Pinchart
When no metering modes are specified in the tuning file, the AGC initialzation fails with [0:00:46.148508875] [209] ERROR RkISP1Agc agc.cpp:46 'AeMeteringMode' parameter not found in tuning file which results in a camera initialization failure. Fix it by downgrading the error into a warning, and continuing the AGC initialization with the default metering mode. Fixes: 35233938ee5d ("ipa: rkisp1: agc: Read histogram weights from tuning file") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-17ipa: libipa: vector: Add matrix-vector multiplicationPaul Elder
Add an operation for multiplying a matrix with a vector. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17ipa: rkisp1: algorithms: Add crosstalk algorithmPaul Elder
Add an algorithm module to the rkisp1 IPA for crosstalk correction. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17ipa: libipa: Add MatrixInterpolator classPaul Elder
Add a class to encapsulate the functionality of fetching a matrix based on an integer key, and interpolating if there is no exact match. This is expected to be used by both color correction matrices / crosstalk correction as well as lens shading correction. A cache is included only for exact matches of the key. The caller is expected to decide the tolererance for rounding. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17ipa: libipa: Add Matrix classPaul Elder
Add a class to represent a Matrix object and operations for adding matrices, multipling a matrix by a scalar, and multiplying two matrices. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-16ipa: libipa: pwl: Specialize YamlObject getterLaurent Pinchart
Implement a specialization of the YamlObject::Getter structure to support deserializing ipa::Pwl objects from YAML data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: pwl: Add a constructor that moves a Point vectorLaurent Pinchart
The Pwl::Pwl(const std::vector<Point> &) constructor is inefficient as it makes a copy of the given points vector. Add a second constructor that takes an rvalue reference to a points vector to provide move semantics. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: pwl: Add a size() functionLaurent Pinchart
Add a size() function to the Pwl class to return the number of points in the piecewise linear function. This is useful, for instance, to validate that all points added with append() or prepend() have been taken into account. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: pwl: Make the empty() function inlineLaurent Pinchart
The Pwl::empty() function is a one-liner that can be easily optimized by the compiler given the chance. Make it inline. While at it, move the function documentation block to match the class declaration order. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: pwl: Suffix \param with directionLaurent Pinchart
Suffix the Doxygen \param commands with the direction for all parameters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: vector: Drop readYaml() functionLaurent Pinchart
Now that YAML deserialization of Vector instances is supported through YamlObject::get(), remove the Vector::readYaml() function. It turns out not to be used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-16ipa: libipa: vector: Specialize YamlObject getterLaurent Pinchart
Implement a specialization of the YamlObject::Getter structure to support deserializing ipa::Vector objects from YAML data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-06-14ipa: rkisp1: agc: Plumb mode-selection and frame duration controlsPaul Elder
Plumb controls for setting metering mode, exposure mode, constraint mode, and frame duration limits. Also report them as available controls, as well as in metadata. While at it, add the missing #include for tuple, as a std::tie is used. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-14ipa: rkisp1: agc: Read histogram weights from tuning filePaul Elder
Add support to the rkisp1 AGC to read histogram weights from the tuning file. As controls for selecting the metering mode are not yet supported, for now hardcode the matrix metering mode, which is the same as what the AGC previously hardcoded. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-06-13ipa: rkisp1: cproc: Drop incorrect [[maybe_unused]]Stefan Klug
A few function parameters are marked with [[maybe_unused]] but are actually used. Drop the attribute. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-13ipa: rkisp1: cproc: Merge identical functionsStefan Klug
convertContrast() and convertSaturation() are equal. Merge them into one. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-13ipa: rkisp1: cproc: Use anonymous namespace to limit symbol visibilityStefan Klug
Use a anonymous namespace instead of the static keyword to limity symbol visibility. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-13libcamera: libipa: camera_sensor: Define AR0521 helper functions inlineLaurent Pinchart
All CameraSensorHelper subclasses define their member functions inline, except for the CameraSensorHelperAr0521 class. Inline the gainCode() and gain() functions to match the other classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-12ipa: rkisp1: goc: Avoid use of auto for short typeLaurent Pinchart
Replace one occurrence of the auto type qualifier with the explicit type it represents to increase readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-12ipa: rkisp1: goc: Mark default gamma table as static constexprLaurent Pinchart
The values for the default gamma table are stored in an array that is never modified. Mark it as static constexpr to facilitate optimizations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>