| Age | Commit message (Collapse) | Author |
|---|
|
When the current exposure value is calculated, it is cached and used by
filterExposure(). Use private filteredExposure_ and pass currentExposure
as a parameter.
In order to limit the use of filteredExposure_, return the value from
filterExposure().
While at it, remove a stale comment.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
With the controller algorithms running at 60fps, there are some dropped frames
when running at very high famerates. Reducing this to 30fps eliminates all these
drops without any noticeable changes to the image quality.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We now handle disabling ("pausing") AWB in the same way as
AEC/AGC. Instead of letting the pause flag be set so that the code
never runs at all, we instead fix the manual settings to the current
values (but continue to be called).
The algorithm does not restart any calculations in this state, but
continues to add AWB metadata to every frame. Therefore certain other
algorithms that want to know it (CCM and ALSC, for example) can still
find it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Increase the maximum allowable gain from 6.0 to 8.0 in the normal and short
exposure profiles for all camera sensors. Increase this limit to 12.0 for the
long exposure profiles for sensors where this has been defined.
The 6.0x value was somewhat arbitrarily chosen, and does limit the total
exposure in dark conditions.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Limit the gain code to the maximum value reported by the sensor controls
when sending to DelayedControls. The AGC algorithm will handle a lower
gain used by the sensor, provided it knows the actual gain used. This
change ensures that DelayedControls will never report an unclipped gain
used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the new utils::abs_diff() function where appropriate to replace
manual implementations.
While at it fix a header ordering issue in
src/libcamera/pipeline/raspberrypi/raspberrypi.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
For consistency with UniqueFD, rename the fd() function to get().
Renaming UniqueFD::get() to fd() would have been another option, but was
rejected to keep as close as possible to the std::shared_ptr<> and
std::unique_ptr<> APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The FileDescriptor class is a generic helper that matches the criteria
for the base library. Move it there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The non-static class member "numCells_" is not initialized in the
constructor. Fix it.
Reported-by: Coverity CID 365801
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Report value of sensor's gain pertaining to the current request
completion, as that is the gain value the request completed with.
The Agc algorithm processes the gain value for incoming next request
hence it should not be reported in request's metadata.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a new parameter buffer needs to be queued, we need to specify which
algorithm is activated or not in the ISP. Add a simple prepare function
in AGC for that, which may later evolve to take the exposure locking
into account. For that function to be called, we also need to add the
loop on the algorithms in IPARkISP1::queueRequest.
We no longer disable the AE algorithm based on the controls::AeEnable,
which will be handled in a different manner later.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have IPAContext and Algorithm, we can implement a simple AGC
based on the IPU3 one. It is very similar, except that there is no
histogram used for an inter quantile mean. The RkISP1 is returning a 5x5
array (for V10) of luminance means. Estimating the relative luminance is
thus a simple mean of all the blocks already calculated by the ISP.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ISP can use 25 or 81 cells depending on its revision. Remove the
cached value in IPARkISP1 and use IPASessionConfiguration to store it
and pass it to AGC later.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The pipeline handler populates a new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that libipa offers a templated class for Algorithm, use it in
RkISP1.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The algorithms are using the same function names with specialized
parameters. Instead of duplicating code, introduce a libipa Algorithm
class which implements a base class with template parameters in libipa,
and use it in each IPA.
As we now won't need an algorithm class for each IPA, move the
documentation to libipa, and make it agnostic of the IPA used. While at
it, fix the IPU3::Algorithm::Awb documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Before using any algorithm, we want the IPAContext to be ready for
those. Introduce the IPAContext following the existing design from
IPA::IPU3. Each algorithm will then introduce the needed fields.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the AGC will run, it will use analogue gains as double values. We
will need those values to be converted to apply the control. Introduce
CameraSensorHelper and call it at init().
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The driver is responsible for setting the proper limits for its
controls.
The IMX219 has an analogue gain of 1.0 when the gain code is set to 0,
therefore we can not clamp to a minimum gain code of 1.
Rework this for both IPU3 and RkISP1, for both Exposure and Gain
controls.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the IPA is initialized, it will need to know the sensor model
used in order to properly call CameraSensorHelper for the analogue gain.
Modify the init definition in the pipeline handler and in the IPA as
well as the mojo interface to pass the IPASettings.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The equation is badly reported in the CameraSensorHelper, as m1 and c0
are inverted. Correct it to have a proper gain calculation.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the urls in the README file for building/running libcamera on the
Raspberry Pi platforms.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The shutter speed limits and analogue gains limits are in the agc
structure in IPASessionConfiguration. They are badly mentioned as being
part of the grid structure, fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The relative luminance is calculated using an iterative process to
account for saturation in the sensor, as multiplying pixels by a gain
doesn't increase the relative luminance by the same factor if some
regions are saturated. Relative luminance estimation doesn't apply a
saturation, which produces a value that doesn't match what the sensor
will output, and defeats the point of the iterative process. Fix it.
Fixes: f8f07f9468c6 ("ipa: ipu3: agc: Improve gain calculation")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The inter-quantile mean is a value that is computed as part of the AGC
run. It doesn't need to be stored in a member variable. Return it from
measureBrightness(), which makes the flow of data easier to follow.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The "current" prefix in the currentYGain variable name is confusing:
- In Agc::estimateLuminance(), the variable contains the gain to be
applied to the image, which is neither a "current" gain nor a "Y"
gain. Rename it to "gain".
- In Agc::computeExposure(), the variable contains the gain computed by
the relative luminance method, so rename it to "yGain".
While at it, rename variables to match the libcamera coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC computes the average relative luminance of the frame and calls
the value "normalized luma", "brightness" or "initialY". The latter is
the most accurate term, as the relative luminance is abbreviated Y, but
the "initial" prefix isn't accurate.
Standardize the vocabulary on "relative luminance" in code and comments,
abbreviating it to Y when needed.
While at it, rename variables to match the libcamera coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The kMaxLuminance constant is badly named, it's not a maximum luminance,
but the maximum integer value output by the AWB statistics engine for
per-channel averages. The constant is used in a single place, hardcoding
the value is actually more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation)
the gain to apply on the exposure value was only using the histogram.
Now that the global brightness of the frame is estimated too, we don't
need to remove part of the saturated pixels from the equation anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can report the controls::AnalogueGain metadata now that AGC is
updating it correctly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the exposure time calculated, report it in the
controls::ExposureTime and don't use the pipeline handler for it
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We use the line duration several times in the IPAIPU3. Instead of
recalculating it each time, cache the value as a utils::Duration.
ExposureTime and FrameDuration units are in micro-seconds, cast the
Duration accordingly.
As sensorInfo is no longer used in updateSessionConfiguration remove the
reference to it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that the color temperature is updated per-frame, use the value and
set the corresponding controls::ColourTemperature.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The AWB estimates the color temperature, but it is not used at all. It
can be useful for debug purpose at least, but also for lux estimation
later, to be able to know the temperature estimated for a given frame.
Add a new member to the IPAFrameContext::awb for this purpose, and
update the value in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The minimum and maximum exposure are stored in lines. Replace it by
values in time to simplify the calculations.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Previously, the exposure value was calculated based on the estimated
shutter time and gain applied. Now that we have the real values for the
current frame, use those before estimating the next one and rename the
variable accordingly.
As the exposure value is updated in the beginning of the computation,
there is no need to initialize effectiveExposureValue anymore in the
configure call, and it can be a local variable and not a class variable
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When an image is partially saturated, its brightness is not increasing
linearly when the shutter time or gain increases. It is a big issue with
a backlight as the algorithm is fading to darkness right now.
Introduce a function to estimate the brightness of the frame, based on
the current exposure/gain and loop on it several times to estimate it
again and approach the non linear function.
Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When we compute the new gain, we use the iqMean_ and estimate an
exposure value gain to apply. Return early when the gain is less than
1%.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the real exposure applied at each frame, remove the
early return based on a frame counter and compute the gain for each
frame.
Introduce a number of startup frames during which the filter speed is
1.0, meaning we apply instantly the exposure value calculated and not a
slower filtered one. This is used to have a faster convergence, and
those frames may be dropped in a future development to hide the
convergance process from the viewer.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the histogram is calculated, we check if a cell is saturated or not
before cumulating its green value. This is wrong, and it can lead to an
empty histogram in case of a fully saturated frame.
Use a constant to limit the amount of pixels within a cell before
considering it saturated. If at the end of the loop we still have an
empty histogram, then make it a fully saturated one.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=84
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pipeline handler populates the new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Make those values the frameContext::sensor values for the frame when the
EventStatReady event is received.
AGC also needs to use frameContext.sensor as its input values and
frameContext.agc as its output values. Modify computeExposure by passing
it the frameContext instead of individual exposure and gain values.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
IPU3Event and IPU3Action use single ControlList for both libcamera and
V4L2 controls, and it's content could be either one based on the
context. Extend IPU3Event and IPU3Action for sensor V4L2 controls, and
preserve the original one for only libcamera Controls to make the
content of an event more specific.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
[Jean-Michel: remove lensControls from the original patch]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPU3 IPA has three events which are handled from the pipeline
handler.
The events are received in the sequence, EventProcessControls,
EventFillParams, and finally EventStatReady, while the code lists these
in a different order.
Update the flow of IPAIPU3::processEvent() to match the expected
sequence of events, to help support the reader in interpreting the flow
of events through the IPA.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The necessary tuning file and CamHelper is added for the imx519 sensor.
The imx519 is a 16MP rolling shutter sensor. To enable
it, please add
dtoverlay=imx519
to the /boot/config.txt file and reboot the Pi.
Signed-off-by: Lee Jackson <info@arducam.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In case the maximum exposure received from the sensor is very high, we
can have a very high shutter speed with a small analogue gain, and it
may result in very slow framerate. We are not really supporting it for
the moment, so clamp the shutter speed to an arbitrary value of 60ms.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPAFrameContext uses unnamed structures to group items. Doxygen
doesn't seem to support this properly, documentation isn't properly
generated and warnings are output during compilation. Suppress the
warning with a workaround that still results in incorrect generated
documentation until Doxygen gets fixed.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[JMH: Fix doxygen variable usage]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
While the stop() function does not currently perform any action, it forms
part of the IPA interface and is a public function in the class.
Promote it to a full (but basic) function implementation and begin the
documentation accordingly so that there is an appropriate stub to
perform stop operations if they come up.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
