| Age | Commit message (Collapse) | Author |
|---|
|
As explained in the coding style document, usage of std::abs() is
preferred over abs() or fabs() as it picks the correct function based on
the argument type. Replace calls to abs() and fabs() with std::abs() in
the Raspberry Pi algorithms.
This fixes a reported warning from clang:
../src/ipa/rpi/controller/rpi/awb.cpp:508:6: error: using integer absolute value function 'abs' when argument is of floating point type [-Werror,-Wabsolute-value]
if (abs(denominator) > eps) {
^
../src/ipa/rpi/controller/rpi/awb.cpp:508:6: note: use function 'std::abs' instead
if (abs(denominator) > eps) {
^~~
std::abs
Reported-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a user is taking control of exposure and gain, setting them
manually, we set the AGC "stable region" to zero. This means that any
user changes, however small, will be applied, and they won't be
regarded as "too small to bother with".
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Unlike in C where they have been standardized since C99, variable-length
arrays in C++ are an extension supported by gcc and clang. Clang started
warning about this with -Wall in version 18:
src/libcamera/ipc_unixsocket.cpp:250:11: error: variable length arrays in C++ are a Clang extension [-Werror,-Wvla-cxx-extension]
250 | char buf[CMSG_SPACE(num * sizeof(uint32_t))];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
One simple option is to disable the warning. However, usage of VLAs in
C++ is discouraged by some, usually due to security reasons, based on
the rationale that developers are often unaware of unintentional use of
VLAs and how they may affect the security of the code when the array
size is not properly validated.
This rationale may sound dubious, as the most commonly proposed fix is
to replace VLAs with vectors (or just arrays dynamically allocated with
new() wrapped in unique pointers), without adding any size validation.
This will not produce much better results. However, keeping the VLA
warning and converting the code to dynamic allocation may still be
slightly better, as it can prompt developers to notice VLAs and check if
size validation is required.
For these reasons, convert all VLAs to std::vector. Most of the VLAs
don't need extra size validation, as the size is bound through different
constraints (e.g. image width for line buffers). An arguable exception
may be the buffers in IPCUnixSocket::sendData() and
IPCUnixSocket::recvData() as the number of fds is not bound-checked
locally, but we will run out of file descriptors before we could
overflow the buffer size calculation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The gcc used in my current buildroot (Version 12.3) errors out with
-Wmaybe-uninitialized. Fix that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Multiple local functions are defined in the global namespace without the
static keyword. This compiles fine for now, but will cause a missing
declaration warning when we enable them. To prepare for that, move the
function declaration to an anonymous namespace.
While at it, for consistency, include an existing static function in the
namespace and drop the static keyword.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Now that deserializing a Pwl object from YAML data is possible using the
YamlObject::get() function, replace all usage of Pwl::readYaml() to
prepare for its removal.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On Raspberry Pi 4
|
|
To reduce code duplication, use the Pwl class from libipa. This also
removes the Pwl class from the Raspberry Pi IPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for the following HDR modes in the Raspberry Pi IPA:
- Night mode
- Single exposure mode
- Multi-exposure (merged and unmerged)
The algorithm is updated to expect the HDR short channel to meter
explicitly for highlights. This means that it will not in general
under-expose the short channel more than is actually necessary.
When images don't have much saturation, it's good to detect this so
that some of the boost we want to apply to the dark areas can be
implemented as regular gain. This means we can then adjust the tone
curve less, leading to less flat looking images.
The impact on the HDR algorithm is then that this determines how we
build tonemaps dynamically. The highlights are more-or-less correct
now, so we have to build a power-type curve that gives us the
appropriately configured targets in the lower part of the histogram.
We allow the tuning file to supply the maximum spatial gain value,
rather than the whole curve (though it can supply this if it
wants). Some parameter defaults are tweaked to be generally better
across the range of our cameras.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Replace manual implementations of the utils::to_underlying() helper with
calls to the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
This allows the IPA to get reasonable default colour gains before AWB
has run. This is particularly important on the PiSP platform where
these numbers are helpful in programming the Front End statistics
block in advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to discover the correct black level values even
before any frames have been processed. This is important on the PiSP
platform where the front end black level blocks must be programmed in
advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't assert when taking the weighted mean of a zero-width or
zero-weight interval; return its upper bound. That is certainly
correct in the zero-width case, and plausible otherwise.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Advertise hardware constraints on the pixel processing rate through the
Controller::HardwareConfig structure. When calculating the minimum line
length during a configure() operation, ensure that we don't exceed this
constraint.
If we do exceed the hardware constraints, increase the modes's minimum
line length so the pixel processing rate falls below the hardware limit.
If this is not possible, throw a loud error message in the logs.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We make a few small improvements to the code:
* The arrayToSet method is prevented from overwriting the end of the
array if there are too many values in the input table. If you supply
a table, it will force you to put the correct number of elements in
it.
* The arrayToSet and setStrength member functions are turned into
static functions. (There may be a different public setStrength
member function in future.)
* When no tables at all are given, the configuration is flagged as
being disabled, so that we can avoid copying tables full of zeroes
around. As a consequence, the pipeline handler too will disable this
hardware block rather than run it needlessly. (Note that the tuning
tool will put in a completely empty "rpi.cac" block if no CAC tuning
images are supplied, benefiting from this behaviour.)
* The initialise member function is removed as it does nothing.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change where time-filtering is done before sorting out the
digital gain means that the target exposure without digital gain is no
longer set, breaking the 'AeLocked' calculation.
We can use the regular (full) target exposure instead.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain")
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The algorithm computes R/G and B/G colour ratio statistics which we
should not allow to go to zero because there is clearly no gain you
could apply to R or B to equalise them. Instead flag such regions as
having "insufficient data" in the normal manner.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to be able to do things like enable/disable AGC for all the
channels, so most of the AGC controls are updated to be applied to all
channels. There are a couple of exceptions, such as setting explicit
shutter/gain values, which apply only to channel 0.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
AWB writes this out during prepare, so we may as well read it in AGC
prepare as well. Reading it in process is wrong on the PiSP platform
because process runs before prepare, so the AWB status won't be there
(on vc4 it made no difference).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
"Fast desaturation" is a technique that can help the AGC algorithm to
desaturate images more quickly when they are very
over-exposed. However, it uses digital gain to do this which can
confuse our HDR techniques. Therefore make it optional.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This was being re-read in order to determine what LSC gains had been
applied. We can just retrieve these numbers from the prevAsyncResults_
instead.
This will also enable other future algorithms to manipulate the LSC
tables in the alsc.status, without it breaking the core ALSC algorithm
here.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can perform some of the local contrast adjustment using global
gains in the LSC table. We can vary the amount of gain according to
the measured brightness of that image region.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Whenever the AGC active channels are changed, start with the first
channel listed. This allows applications to rely on a particular channel
being generated first. For example, multi-exposure HDR always wants the
short channel first.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The code was inadvertently overwriting the caller's StatisticsPtr,
meaning that subsequent algorithms would get the wrong image
statistics when AGC channels changed.
This could be fix using std::ref, though I find the C-style pointer
fix easier to understand!
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some use cases may require stronger, or different, denosie settings to
others. For example, the way frames are accumulated during single
exposure HDR means that we may want stronger denoise.
This commit adds such support for different configurations that can be
defined in the tuning file.
Older tuning files, or files where there is only a single
configuration, load only the "normal" denoise configuration.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The enableCe() function enables or disables adaptive contrast
enhancement and the restoreCe() function sets it back to its normal
state (which is what was read from the tuning file).
In future, algorithms like HDR might want to take over tonemapping
functions, so any dynamic behaviour here would upset them.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a small "stable region" parameter (defaulting to 2%) within which
the AGC will not adjust the exposure it requests. It allows
applications to configure the AGC to avoid continual micro-adjustments
of exposure values if they are somehow sensitive to it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add new CAC, HDR, Saturation and Tonemapping algorithms.
Add a new Denoise algorithm that handles spatial/temporal/colour denoise
through one interface. With this change, the old SDN algorithm is now
considered deprecated and a warning message will be displayed if it is
enabled.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Prepare the AWB algorithm to support the PiSP hardware. The key change
is to factor in the LS correction in the AWB zone statistics. This is
different from VC4 where the LS correction happens before statistics
gathering.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Prepare the ALSC algorithm to support the PiSP hardware. The key change
is to avoid factoring out the WB correction in the AWB zone statistics.
Add the ALSC correction to the global metadata so that AWB can use it to
factor the gains back in for the AWB calculations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry to Controller::HardwareConfig describing the PiSP hardware
for the IPA and controller algorithms to use.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new boolean field (statsInline) to Controller::HardwareConfigMap.
This field indicates where the statistics are generated in the hardware
ISP pipeline. For statsInline == true, statistics are generated before
the frame is processed (e.g. the PiSP case), and statsInline == false
indicates statistics are generated after the frame is processed (e.g.
the VC4 case).
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the missing try_lock() member function to RPiController::Metadata.
This will allow RPiController::Metadata to be used as a template
parameter in std::scoped_lock.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the json file parsing failed due to a malformed file, the root
pointer would be null. This was not tested and caused a segfault when
trying to use the pointer to retrieve the version key.
Fix this by bailing out early if the parser returns a null pointer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Whenever we run Agc::process(), we store the most recent total
exposure requested for each channel.
With these values we can apply the channel constraints after
time-filtering the requested total exposure, but before working out
how much digital gain is needed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
A channel constraint is somewhat similar to the upper/lower bound
constraints that we use elsewhere, but these constraints apply between
multiple AGC channels. For example, it lets you say things like "don't
let the channel 1 total exposure be more than 8x that of channel 0",
and so on. By using both an upper and lower bound constraint, you
could fix one AGC channel always to be a fixed ratio of another.
Also read a vector of them (if present) when loading the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The switchMode, prepare and process methods are updated to implement
multi-channel AGC correctly:
* switchMode now invokes switchMode on all the channels (whether
active or not).
* prepare must find what channel the current frame is, and run on
behalf of that channel.
* process updates the most recent DeviceStatus and statistics for the
channel of the frame that has just arrived, but generates updated
values working through the active channels in round-robin fashion.
One minor detail in process is that we don't want to change the
DeviceStatus metadata of the current frame, so we now pass this to the
AgcChannel's process method, rather than letting it find the
DeviceStatus in the metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This commit does the basic reorganisation of the code in order to
implement multi-channel AGC. The main changes are:
* The previous Agc class (in agc.cpp) has become the AgcChannel class
in (agc_channel.cpp).
* A new Agc class is introduced which is a wrapper round a number of
AgcChannels.
* The basic plumbing from ipa_base.cpp to Agc is updated to include a
channel number. All the existing controls are hardwired to talk
directly to channel 0.
There are a couple of limitations which we expect to apply to
multi-channel AGC. We're not allowing different frame durations to be
applied to the channels, nor are we allowing separate metering
modes. To be fair, supporting these things is not impossible, but
there are reasons why it may be tricky so they remain "TBD" for now.
This patch only includes the basic reorganisation and plumbing. It
does not yet update the important methods (switchMode, prepare and
process) to implement multi-channel AGC properly. This will appear in
a subsequent commit. For now, these functions are hard-coded just to
use channel 0, thereby preserving the existing behaviour.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a new helper function Histogram::interBinMean() that essentially
replaces the existing Histogram::interQuantileMean() logic but working on
bins instead.
Rework the interQuantileMean() to call into interBinMean() with the
appropriate convertion from quatiles to bins.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The Agc::process() function returns an AgcStatus object in the
metadata as before, but Agc::prepare() is changed to return the values
it computes in a separate AgcPrepareStatus object (under the new tag
"agc.prepare_status").
The "digitalGain" and "locked" fields are moved from AgcStatus to
AgcPrepareStatus.
This will be useful going forward as we can be more flexible about the
order in which prepare() and process() are called, without them
trampling on each other's results.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We now time-filter the exposure before sorting out how much digital
gain is required. This is actually a little more natural and
simplifies the code. It also prepares us for some future work where
this arrangement will be helpful.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrpyi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
prepare() doesn't use the AWB status, so fetching it in process() is
probably better. This change is preparatory to other changes, where we
may find ourselves calling process() without having called prepare()
previously.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In commit 0ee9339331c6, a default metering/exposure/constraint mode is
used if a control sets a mode that is not listed in the camera tuning
file.
Setting a default mode may be undesirable in these cases, so instead
keep the agc mode unchanged. This also matches the behaviour for other
IPA controls where no changes are made in error conditions.
Fixes: 0ee9339331c6 ("ipa: rpi: agc: Gracefully handle missing agc modes")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
If a metering/exposure/constraint mode is not listed in the sensor
tuning file, and a control for the missing mode is set on the agc, we
terminate the application with a fatal log message.
Instead of this fatal termination, log a warning message and switch to
the appropriate default mode so that the application continues running.
Bug: https://github.com/raspberrypi/libcamera/issues/59
Bug: https://github.com/ayufan/camera-streamer/issues/67
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the char array strings in struct AgcStatus with std::string
objects. This simplifies the string handling in the source code.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The region weights for the the AGC zones are handled by the AGC
algorithm. Apply them directly in the IPA (vc4.cpp) to the statistics
that we pass to the AGC.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
