summaryrefslogtreecommitdiff
path: root/src/ipa/rkisp1/algorithms
AgeCommit message (Collapse)Author
2024-06-11pipeline: rkisp1: cproc: Fix default value handlingStefan Klug
Default control values were not applied to activeState. This had no negative side effects in the first place, as the hardware defaults were used. The issue became visible, when only one of the controls was set at runtime. In that case the params for the other values were overwritten with 0 (reset value of activeState) resulting in a black image. While at it, only add the controls to the controls map if the algorithm is contained in the tuning file. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-11ipa: rkisp1: Add GammaOutCorrection algorithmStefan Klug
Add a gamma algorithm for the rkisp1. It defaults to a gamma of 2.2 which closely resembles sRGB. No seperate sRGB mode was implemented because the pwl that models the gamma curve is so coarse that there is basically no difference between srgb and gamma=2.2. The default can be overridden within the tuning file or set at runtime using the gamma control. The gamma algorithm is not enabled by default. This will be done in future tuning file updates. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-05-09ipa: rkisp1: agc: Fix histogram constructionPaul Elder
This histogram reported by the rkisp1 hardware is 20 bits, where the upper 16 bits are meaningful integer data and the lower 4 bits are fractional and meant to be discarded. Remove these 4 bits when construction the histogram. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08ipa: rkisp1: Remove bespoke Agc functionsDaniel Scally
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc we can remove the bespoke functions from the IPA's class. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminanceDaniel Scally
Now that we have a AgcMeanLuminance class that centralises our AEGC algorithm, derive the RkISP1's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicities sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-02-23ipa: rkisp1: Fix histogram weights configurationLaurent Pinchart
The histogram weights are initialized to hardcoded 1's for each histogram grid cell. The code uses the wrong variable for the grid size, resulting in some weights having a 0 value. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: Store hardware parameters in IPA contextLaurent Pinchart
Versions of the ISP differ in the processing blocks they include, as well as in the implementation of some of those blocks. In particular, they have different numbers of histogram bins oe AE statistics cells. The algorithms take these differences into account by checking the ISP version reported by the driver. These checks are currently scattered in multiple places. Centralize them in the IPARkISP1::init() function, and store the version-dependent hardware parameters in the IPA context, accessible by all algorithms. While at it, drop the IPASessionConfiguration::hw member that stores the revision number, unused by the algorithms. It can be added back laer to the IPAHwSettings structure if needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-02-23ipa: rkisp1: agc: Wrap variable length C arrays in spansLaurent Pinchart
The RkISP1 statistics structure contains multiple arrays whose length varies depending on the hardware revision. Accessing those arrays is error-prone, wrap them in spans at the top level to reduce risks of out-of-bound accesses. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2023-06-06ipa: rkisp1: agc: Restore minimum analogue gain limitJacopo Mondi
Commit a3178dd0391f ("ipa: rkisp1: agc: drop hard-coded analogue gain range") removed both minimum and maximum limits for the analogue gain value. However, as some sensors can potentially have a minimum gain lower than 1.0, restore the check for the minimum limit. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-19ipa: rkisp1: agc: drop hard-coded analogue gain rangeBenjamin Bara
As the sensor's analogue gain range is known (read-out in IPARkISP1::configure()), drop the limiting hard-coded range. This enables better performance in low-light conditions for sensors with a higher gain (e.g. the imx327). Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-06ipa: rkisp1: lsc: Fix integer division errorJacopo Mondi
The RkISP1 implementation of the LensShadingCorrection algorithm has been made adaptive to the scene color temperature in commit 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm"). The LSC algorithm interpolates the correction factors using the table's reference color temperatures. When calculating the interpolation coefficients, an unintended integer division makes both coefficient zeros resulting in a completely black image. Fix this by type casting to double one of the division operands. Fixes: 14c869c00fdd ("ipa: rkisp1: Take into account color temperature during LSC algorithm") Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2023-01-25ipa: rkisp1: Raise maximum analogue gainMikhail Rudenko
Omnivision OV4689 sensor driver exposes maximum analogue gain of 16x. Raise kMaxAnalogueGain to 16.0, so that the full gain range can be used. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2022-11-25ipa: rkisp1: agc: Support raw captureLaurent Pinchart
Support raw capture by allowing manual control of the exposure time and analogue gain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25ipa: rkisp1: Add support for manual gain and exposurePaul Elder
Add support for manual gain and exposure in the rkisp1 IPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-11-25ipa: rkisp1: Support raw capture in IPA operationsLaurent Pinchart
The RkISP1 can capture raw frames by bypassing the ISP. In that mode, the ISP will not produce statistics nor consume parameters. Most algorithms will thus be unable to run, with one exception: the AGC will still be able to configure the sensor exposure time and analog gain in manual mode. To prepare for this, add the ability to disable algorithms for the duration of the capture session based on the camera configuration. Individual algorithms report whether they support raw formats at construction time, and the IPA module disables algorithms in configure() based on the stream configurations. Disabled algorithms are skipped during the capture session in the processStatsBuffer() operation. As the ISP doesn't produce statistics, don't try to access the stats buffer. There is no need for similar logic in fillParamsBuffer() as that operation won't be called for raw capture. All algorithms report not supporting raw capture by default. Raw support in AGC will be added separately. The feature is implemented in the RkISP1 module without any support from libipa at this point to avoid designing a generic API based on a single user. This may be changed in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-12ipa: rkisp1: Take into account color temperature during LSC algorithmFlorian Sylvestre
Add coefficients sets in the YAML tuning file to allow using different set depending of the image color temperature (provided by AWB algorithm). During processing, LSC algorithm computes coefficients by doing a linear interpolation between the two closer set. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-09ipa: rkisp1: Move shutter speed and analogue gain limits from agc to sensorLaurent Pinchart
The limits for the shutter speed and analogue gain are stored in IPASessionConfiguration::agc. While they're related to the AGC, they are properties of the sensor, and are stored in the session configuration by the IPA module, not the AGC algorithm. Move them to the IPASessionConfiguration::sensor structure where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-09ipa: Sort algorithm operations based on calling orderLaurent Pinchart
Reorder functions in the base ipa::Algorithm and its derived classes to match the calling order: queueRequest(), prepare() and process(). This makes the code flow easier to read. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-03ipa: rkisp1: Compute LSC algorithm parameter during configureFlorian Sylvestre
LSC gradient parameters are currently computed during prepare() phase. Because these parameters can be computed only one time and stay constant for each frame after, move the computation to the configure() function. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2022-10-24ipa: rkisp1: Fill AGC and AWB metadataLaurent Pinchart
Fill the frame metadata in the AGC and AWB algorithm's prepare() function. Additional metadata for other algorithms will be addressed later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-24ipa: Pass metadata to Algorithm::process() functionLaurent Pinchart
Extend the Algorithm::process() function with a metadata control list, to be filled by individual algorithms with frame metadata. Update the rkisp1 and ipu3 IPA modules accordingly, and drop the dead code in the IPARkISP1::prepareMetadata() function while at it. This only creates the infrastructure, filling metadata in individual algorithms will be handled separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-10ipa: rkisp1: Drop use of utils::defoptLaurent Pinchart
utils::defopt causes compilation issues on gcc 8.0.0 to gcc 8.3.0, likely due to bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86521 that was fixed in gcc 8.4.0. gcc 8.3.0 may be considered old (libcamera requires gcc-8 or newer), but it is shipped by Debian 10 that has LTS support until mid-2024. As no workaround has been found to fix compilation on gcc 8.3.0 while still retaining the functionality of utils::defopt, stop using it in the RkISP1 IPA module. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-01ipa: rkisp1: Remove initialized_ flags from algorithmsLaurent Pinchart
Multiple algorithms have an initialized_ flag that they set to true at the end of the init() function, and check at the beginning of prepare() to skip preparation. This serves no real purpose, as the flag can only be false if init() fails, in which case the IPA module initialization as a whole will fail. Drop the initialized_ flags. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-09-28ipa: rkisp1: awb: Remove bias from gain calculationLaurent Pinchart
The red and blue gains are computed by dividing the green mean by the red and blue means respectively. An offset of 1 is added to the dividers to avoid divisions by zero. This introduces a bias in the gain values. Fix it by clamping the divisors to a minimum of 1.0 instead of adding an offset. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Freeze AWB when means are too smallLaurent Pinchart
When the RGB means are too small, gains and color temperature can't be meaningfully calculated. Freeze the AWB in that case, using the previously calculated values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Clamp gains to prevent divisions by zeroLaurent Pinchart
The gain values are currently clamped to the range [0.0, 3.996] used by the hardware. A zero value makes little sense, as it would completely remove the contribution of the corresponding color channel from the AWB accumulators, but worse, would lead to divisions by zero when calculating the raw means in subsequent iterations. Prevent this by setting the minimum gain value to 1/256. While at it, clamp the gain values before filtering them, to improve the stability of the control loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Prevent RGB means from being negativeLaurent Pinchart
Due to hardware rounding errors in the YCbCr means, the calculated RGB means may be negative. This would lead to negative gains, messing up calculation. Prevent this by clamping the means to positive values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Log means, gains and temperature in debug messageLaurent Pinchart
Extend the debug message in Awb::process() to log the means and color temperature in addition to the gains. This is useful for debugging the algorithm behaviour. While at it, set the showpoint flag to print a fixed number of digits after the decimal point, making logs more readable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Add support for RGB meansQuentin Schulz
RkISP actually supports two modes for color means, RGB and YCbCr. The variables where the means are stored are identically named regardless of the color means mode that's been selected. Since the gains are computed in RGB mode, a conversion needs to be done when the mode is YCbCr, which is unnecessary when RGB mode is selected. This adds support for RGB means mode too, by checking at runtime which mode is selected at a given time. The default is still set to YCbCr mode for now. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Use frame context to fix gains calculationsLaurent Pinchart
The AWB statistics are computed after the ISP applies the colour gains. This means that the red, green and blue means do not match the data coming directly from the sensor, but are multiplied by the colour gains that were used for the frame on which the statistics have been computed. The AWB algorithm needs to take this into account when calculating the colour gains for the next frame. Do so by dividing the means by the gains that were applied to the frame, retrieved from the frame context. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: filter: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: dpf: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: cproc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state and frame context to store data in the right place. The active state stores two distinct categories of information: - The consolidated value of all algorithm controls. Requests passed to the queueRequest() function store values for controls that the application wants to modify for that particular frame, and the queueRequest() function updates the active state with those values. The active state thus contains a consolidated view of the value of all controls handled by the algorithm. - The value of parameters computed by the algorithm when running in auto mode. Algorithms running in auto mode compute new parameters every time statistics buffers are received (either synchronously, or possibly in a background thread). The latest computed value of those parameters is stored in the active state in the process() function. The frame context also stores two categories of information: - The value of the controls to be applied to the frame. These values are typically set in the queueRequest() function, from the consolidated control values stored in the active state. The frame context thus stores values for all controls related to the algorithm, not limited to the controls specified in the corresponding request, but consolidated from all requests that have been queued so far. For controls that can be specified manually or computed by the algorithm depending on the operation mode (such as the colour gains), the control value will be stored in the frame context in queueRequest() only when operating in manual mode. When operating in auto mode, the values are computed by the algorithm and stored in the frame context in prepare(), just before being stored in the ISP parameters buffer. The queueRequest() function can also store ancillary data in the frame context, such as flags to indicate if (and what) control values have changed compared to the previous request. - Status information computed by the algorithm for a frame. For instance, the colour temperature estimated by the algorithm from ISP statistics calculated on a frame is stored in the frame context for that frame in the process() function. The active state and frame context thus both contain identical members for most control values, but store values that have a different meaning. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-09-28ipa: rkisp1: agc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The frame context is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Use frame number passed to Algorithm::prepare()Laurent Pinchart
Now that the Algorithm::prepare() function takes a frame number, we can use it to replace the IPAActiveState::frameCount member. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Rename frameContext to activeStateKieran Bingham
The RkISP1 IPA module creates a single instance of its IPAFrameContext structure, effectively using it more as an active state than a per-frame context. To prepare for the introduction of a real per-frame context, move all the members of the IPAFrameContext structure to a new IPAActiveState structure. The IPAFrameContext becomes effectively unused at runtime, and will be populated back with per-frame data after converting the RkISP1 IPA module to using a frame context queue. The IPAActiveState structure will slowly morph into a different entity as individual algorithm get later ported to the frame context API. While at it, fix a typo in the documentation of the Agc::computeExposure() function that incorrectly refers to the frame context instead of the global context. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: libipa: algorithm: queueRequest(): Pass frame contextKieran Bingham
IPA modules have access to incoming Request's controls list and need to store them in the frame context at queueRequest() time. Pass the frame context to the Algorithm::queueRequest() function. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-09-28ipa: libipa: algorithm: process(): Pass frame numberKieran Bingham
Pass the frame number of the current frame being processed. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: libipa: algorithm: prepare(): Pass frame and frame ContextKieran Bingham
Pass the current frame number, and the current FrameContext for calls to prepare. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-27ipa: libipa: Pass a reference instead of pointer to Algorithm::process()Laurent Pinchart
Frame contexts will become the core component of IPA modules, always available to functions of the algorithms. To indicate and prepare for this, turn the frame context pointer passed to Algorithm::process() into a reference. The RkISP1 IPA module doesn't use frame contexts yet, so pass a dummy context for now. While at it, drop an unneeded [[maybe_unused]] from Agc::process() and add a missing parameter documentation for the frameContext argument to Awb::process(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-30ipa: rkisp1: lsc: Use double instead of float to accumulate vector of doublesMarvin Schmidt
clang-tidy's bugprone-fold-init-type check warns about this: > ../src/ipa/rkisp1/algorithms/lsc.cpp:61:14: warning: folding type 'double' into type 'float' might result in loss of precision [bugprone-fold-init-type] > float sum = std::accumulate(sizes.begin(), sizes.end(), 0.0f); > ^ Fixes: b3e96411d8a9 ("ipa: rkisp1: Add support of Lens Shading Correction control") Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-21ipa: rkisp1: Add support of Denoise Pre-Filter controlFlorian Sylvestre
The denoise pre-filter algorithm is a bilateral filter which combines a range filter and a domain filter. The denoise pre-filter is applied before demosaicing. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for LSC algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the lsc struct in IPASessionConfiguration which indicates if the LSC hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for AWB algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the awb struct in IPASessionConfiguration which indicates if the AWB hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-19ipa: rkisp1: Add manual color gainsPaul Elder
Add support for manually controlling the color gains on the rkisp1 IPA. To that end, add and plumb the AwbEnable and ColourGains controls. As per-frame controls aren't supported yet in the rkisp1 IPA, simply apply and perform checks on the controls immediately. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of ColorProcessing controlFlorian Sylvestre
Add ColorProcessing algorithm that is in charge to manage brightness, contrast and saturation controls. These controls are currently based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Filter controlFlorian Sylvestre
Denoise and Sharpness filters will be applied by RkISP1 during the demosaicing step. The denoise filter is responsible for removing noise from the image, while the sharpness filter will enhance its acutance. Add filter algorithm with denoise and sharpness values based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Defect Pixel Cluster Correction controlFlorian Sylvestre
The Defect Pixel Cluster Correction algorithm is responsible to minimize the impact of defective pixels. The on-the-fly method is actually used, based on coefficient provided by the tuning file. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>