summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi
AgeCommit message (Collapse)Author
2021-07-14ipa: raspberrypi: Remove unused MetadataPtrJean-Michel Hautbois
The Metadata class defines a shared_ptr named MetadataPtr. It is not used anywhere in the source code, so remove it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2021-07-12ipa: raspberrypi: Make variable names consistentNaushir Patuck
s/DefaultAnalogueGain/defaultAnalogueGain/ s/DefaultExposureTime/defaultExposureTime/ Change these for consistency with the other static const variables. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Increase the default max frame duration to 250sNaushir Patuck
With the recent change to allow long exposures on the imx477, the existing 100s limit was not adequate. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Allow long exposure modes for imx477.Naushir Patuck
Update the imx477 CamHelper to use long exposure modes if needed. This is done by overloading the CamHelper::GetVBlanking function to return a frame length (and vblank value) computed using a scaling factor when the value would be larger than what the sensor register could otherwise hold. CamHelperImx477::Prepare is also overloaded to ensure that the "device.status" metadata returns the right value if the long exposure scaling factor is used. The scaling factor is unfortunately not returned back in metadata. With the current imx477 driver, we can achieve a maximum exposure time of approx 127 seconds since the HBLANK control is read-only. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add frame_length to DeviceStatusNaushir Patuck
Store the frame length into the DeviceStatus struct. The value is extracted from embedded data when available, or calculated from the VBLANK value passed from DelayedControls otherwise. Update imx477 and imx219 CamHelper classes to extract the frame length from the embedded data buffer. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add an operator<< to struct DeviceStatusNaushir Patuck
Add an operator<< overload to log all fields in DeviceStatus, and remove the manual logging statements in the IPA and CamHelper. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add a constructor struct DeviceStatusNaushir Patuck
The constructor sets all fields to 0. This replaces the memset(0) and default value initialisation usage in the agc and lux controllers respectively. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Make device_status.h C++ only header, and update commentsNaushir Patuck
This header file is no longer C compatible, so remove the extern "C" declaration. Replace C++ style comments with C style based on libcamera guidelines. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-11libcamera: buffer: Rename buffer.h to framebuffer.hLaurent Pinchart
libcamera names header files based on the classes they define. The buffer.h file is an exception. Rename it to framebuffer.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-02ipa: raspberrypi: Drop unneeded [[maybe_unused]]Laurent Pinchart
The [[maybe_unused]] in the IMX477 camera helper isn't needed. This had been pointed out by Naush during review, but I failed to update the code before pushing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2021-06-30ipa: raspberrypi: Generalise the SMIA metadata parserNaushir Patuck
Instead of having each CamHelper subclass the MdParserSmia, change the implementation of MdParserSmia to be more generic. The MdParserSmia now gets given a list of registers to search for and helper functions are used to compute exposure lines and gain codes from these registers. Update the imx219 and imx477 CamHelpers by using this new mechanism. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-30ipa: raspberrypi: Use a unique_ptr for the metadata parserNaushir Patuck
The derived CamHelper class now allocates a metadata parser object through a unique_ptr that is passed to the base class constructor. This automates the lifetime management of the parser object. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28libcamera: ipa: raspberrypi: Add support for ov9281 sensorDavid Plowman
The necessary tuning file and CamHelper is added for the ov9281 sensor. The ov9281 is a 1280x800 monochrome global shutter sensor. To enable it, please add dtoverlay=ov9281 to the /boot/config.txt file and reboot the Pi. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28libcamera: ipa: raspberrypi: Demote warnings about lack of AWB resultsDavid Plowman
Warnings about the lack of AWB status results are demoted to being just "Debug". With monochrome sensors becoming more common this would otherwise overwhelm the console output, and in practice nothing is really lost as it is normally very evident if AWB is failing to run. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-25libcamera/base: Validate internal headers as privateKieran Bingham
Headers which must not be exposed as part of the public libcamera API should include base/private.h. Any interface which includes the private.h header will only be able to build if the libcamera_private dependency is used (or the libcamera_base_private dependency directly). Build targets which are intended to use the private API's will use the libcamera_private to handle the automatic definition of the inclusion guard. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move span to base libraryKieran Bingham
Move span, and adjust the Doxygen exclusion as well. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move extended base functionalityKieran Bingham
Move the functionality for the following components to the new base support library: - BoundMethod - EventDispatcher - EventDispatcherPoll - Log - Message - Object - Signal - Semaphore - Thread - Timer While it would be preferable to see these split to move one component per commit, these components are all interdependent upon each other, which leaves us with one big change performing the move for all of them. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move utils to the base libraryKieran Bingham
Move the utils functionality to the libcamera/base library. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-22ipa: raspberrypi: Fix possible buffer overrun in metadata parsingNaushir Patuck
The SMIA metadata parser could possibly read one byte past the end of the buffer as the buffer size test ran after the read operation. Fix this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Non-functional formatting fixes to md_parser_smia.cppNaushir Patuck
Adjust source formatting to closer match libcamera guidelines: - Remove unused header files. - Switch to C style comments. - Adjust whitespace for readability. - Remove retcode local variable usage. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Rename md_parser.cpp to md_parser_smia.cppNaushir Patuck
The file implements the MdParserSmia class, so change the file name to reflect this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Set default values for member variables of MdParserNaushir Patuck
Set some sensible default values for member variables of the MdParser class. Remove buffer_size_bytes_ along with some related asserts as this class now uses libcamera::Span for buffer handling, and buffer_size_bytes_ is unused. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Non-functional formatting fixes to md_parser.hppNaushir Patuck
Adjust source formatting to closer match libcamera guidelines: - Switch to C style comments. - Add whitespace for readability. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch the AGC/Lux code to use utils::DurationNaushir Patuck
Convert the core AGC and Lux controller code to use utils::Duration for all exposure time related variables and calculations. Convert the exposure/shutter time fields in AgcStatus and DeviceStatus to use utils::Duration. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch AgcAlgorithm API to use utils::DurationNaushir Patuck
Switch the AgcAlgorithm API functions to use utils::Duration for all time based variables. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch ipa and cam_helper to use utils::DurationNaushir Patuck
Switch the ipa and cam_helper code to use libcamera::utils::Duration for all time based variables. This improves code readability and avoids possible errors when converting between time bases. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-27controls: Split FrameDurations into FrameDuration and FrameDurationLimitsPaul Elder
We need a separate control to report the nominal frame duration, but it's also useful to report the min/max frame duration values that will be used. Split the FrameDurations control into FrameDuration and FrameDurationLimits respectively to support both of these. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-24ipa: ipc: Rename CameraSensorInfo to IPACameraSensorInfoUmang Jain
This matches the naming convention for IPA IPC. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: mojom: Move CameraSensorInfo struct exclusively to IPA IPCUmang Jain
CameraSensorInfo structure is designed to pass in camera sensor related information from pipeline-handler to IPA. Since the pipeline-handler and IPA are connected via mojom IPC IPA interface, the interface itself provides a more suitable placement of CameraSensorInfo, instead of camera_sensor.h (which is a libcamera internal header ultimately, at this point). As CameraSensorInfo is already defined in core.mojom, it is just a matter of removing [skipHeader] tag to allow code-generation of CameraSensorInfo. Finally, update header paths to include CameraSensorInfo definition from IPA interfaces instead of "libcamera/internal/camera_sensor.h". Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11meson: Replace obselete join_paths() with '/' operatorUmang Jain
Since meson v0.49.0, join_paths() is equivalent to '/' hence, drop and replace it with '/' short-hand in meson files. This commit does not introduce any functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-11ipa: raspberrypi: Rate-limit the controller algorithmsNaushir Patuck
The controller algorithms currently run on every frame provided to the IPA by the pipeline handler. This may be undesirable for very fast fps operating modes where it could significantly increase the computation cycles (per unit time) without providing any significant changes to the IQ parameters. The added latencies could also cause dropped frames. Pass the FrameBuffer timestamp to the IPA through the controls. This timestamp will be used to rate-limit the controller algorithms to run with a minimum inter-frame time given by a compile time constant, currently set to 16.66ms. On startup, we don't rate-limit the algorithms until after the number of frames required for convergence. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add a Merge method to RPiController::MetadataNaushir Patuck
Add a new Merge method to the Metadata class. This will merge all unique key/value pairs from a source metadata map to the destination map. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add move/copy ctors and operators to Metadata classNaushir Patuck
Add a default, move and copy constructor as well as a move operator implementation RPiController::Metadata class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Switch to std::scoped_lock in the Metadata classNaushir Patuck
Replace std::lock_guard with std::scoped_lock. When locking a single mutex, both are functionally the same. When locking two mutexes in the operator= overload, the scoped_lock uses a deadlock avoidance algorithm to avoid deadlock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Reformat RPiController::Metadata class headerNaushir Patuck
Rearrange header includes to be in alphabetical order. Add whitespace to class definition to match libcamera coding guidelines. Fix a typo in the comment showing an example of scoped locks. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Store dropped frame count in a member variableNaushir Patuck
Store the number of dropped frames on startup in a member variable. This will be used in a subsequent change for rate limiting the controller algorithms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Use CamHelpers to generalise sensor embedded data parsingDavid Plowman
CamHelpers get virtual Prepare() and Process() methods, running just before and just after the ISP, just like Raspberry Pi Algorithms. The Prepare() method is able to parse the register dumps in embedded data buffers, and can be specialised to perform custom processing when necessary. The IPA itself only needs to call the new Prepare() and Process() methods. It must fill in the DeviceStatus from the controls first, in case the Prepare() method does not supply its own values. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Make sensor embedded data parser use Span classDavid Plowman
Improve MdParser::Parse() by taking a Span, pointing to const data that it should not change, as its input buffer. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-27ipa: cam_helper: Correct a wrong choice of termSebastian Fricke
Sensors provide embedded data buffers and not metadata buffers, replace the incorrect term with the correct one. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-27ipa: cam_helper_imx219: Rework commentSebastian Fricke
Fix two typos and improve the sentence. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-15ipa: raspberrypi: cam_helper: Remove duplicate wordsSebastian Fricke
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-29ipa: raspberrypi: Fix typo and improve wordingSebastian Fricke
s/Return the validated limits out though metadata./ Return the validated limits via metadata./ Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28ipa: raspberrrypi: Remove duplicate commentSebastian Fricke
The exact same comment is used two times within 5 lines. Remove one of them as it is redundant. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::configure()Naushir Patuck
Rename ConfigInput to IPAConfig to be more consistent with the naming, and remove ConfigInput::op, as it is never used. Replace ConfigOutput with a ControlList type, as that is the only return type from ipa::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::start()Naushir Patuck
Separate out the in and out parameters in ipa::start() as they are not the same. This function now takes in a ControlList and returns out a struct StartConfig which holds a ControlList and drop frame count for the pipeline handler to action. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Remove unused member variableNaushir Patuck
The lastMode_ member variable is now unused, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Move the controller initialise to ipa::init()Naushir Patuck
The controller initialise is a one-off operation, so move it from ipa::configure() to ipa::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23pipeline: ipa: raspberrypi: Open the CamHelper on ipa::init()Naushir Patuck
Move the opening of the CamHelper from ipa::configure() to ipa::init(). This allows the pipeline handler to get the sensor specific parameters in pipeline_handler::match() where the ipa is initialised. Having the sensor parameters available earlier will allow selective use of the embedded data node in a future change. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-14ipa: raspberrypi: Add support for imx327-based SE327M12 moduleDavid Plowman
This patch adds support for the Soho Enterprises SE327M12 module. The sensor is an imx327 which therefore uses the imx290 kernel driver and CamHelper. To use this module and camera tuning, place the following in the /boot/config.txt file: dtoverlay=imx290,clock-frequency=37125000 and then the existing imx290.json file must be over-written with se327m12.json Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Use direct return value for configure()Paul Elder
Now that we support returning int directly in addition to other output parameters, improve the configure() function in the raspberrypi IPA interface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-18 04:17:13 +0000