summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi
AgeCommit message (Collapse)Author
2023-04-12ipa: raspberrypi: agc: Add "shadows" constraint modeDavid Plowman
The "shadows" constraint mode actually exists in a number of tuning files, but had been omitted from the list of supported modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the focus reporting codeNaushir Patuck
Use the generalised focus statistics structure to compute the centre window focus FoM value. This avoids needed to hard-code a specific grid size. Remove the focus reporting algorithm as the functionality is duplicated by this bit of IPA code. Remove focus_status.h as it is no longer needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the autofocus algorithmNick Hollinghurst
Remove any hard-coded assumptions about the target hardware platform from the autofocus algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. Additionally, PDAF statistics are represented by a generalised region statistics structure to be device agnostic. These changes also require the autofocus algorithm to initialise region weights on the first frame's prepare()/process() call rather than during initialisation. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the agc algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the AGC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. This change replaces all hard-coded arrays with equivalent std::vector types. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Make RegionStats::get() always return a Region structNaushir Patuck
Update the overloaded RegionStats::get() and RegionStats::getFloating() member functions to return a Region struct for consistency. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the contrast algorithmNaushir Patuck
Generalise the contrast algorithm code by removing any hard-coded assumptions about the target hardware platform. Instead, the algorithm code creates a generic Pwl that gets returned to the IPA, where it gets converted to the bcm2835 hardware specific lookup table. As a drive-by, remove an unused mutex. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: alsc: Use a better type name for sparse arraysDavid Plowman
The algorithm uses the data type std::vector<std::array<double, 4>> to represent the large sparse matrices that are XY (X, Y being the ALSC grid size) high but with only 4 non-zero elements on each row. Replace this slightly long type name by SparseArray<double>. No functional changes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: alsc: Replace std::vectors by Array2D classDavid Plowman
The Array2D class is a very thin wrapper round std::vector that can be used almost identically in the code, but it carries its 2D size with it so that we aren't passing it around all the time. All the std::vectors that were X * Y in size (X and Y being the ALSC grid size) have been replaced. The sparse matrices that are XY * 4 in size have not been as they are somewhat different, are used differently, require more code changes, and actually make things more confusing if everything looks like an Array2D but are not the same. There should be no change in algorithm behaviour at all. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the ALSC algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the ALSC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. The ALSC calculations use run-time allocated arrays/vectors on every frame. Allocating these might add a non-trivial run-time penalty. Replace these dynamic allocations with a set of reusable pre-allocated vectors during the init phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Add hardware configuration to the controllerNaushir Patuck
Add a new Controller::HardwareConfig structure that captures the hardware statistics grid/histogram sizes and pipeline widths. This ensures there is a single centralised places for these parameters. Add a getHardwareConfig() helper function to retrieve these values for a given hardware target. Update the statistics populating routine in the IPA to use the values from this structure instead of the hardcoded numbers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi Store the target string in the controllerNaushir Patuck
The target string may be used by algorithms to determine the running hardware target. Store the target string provided by the camera tuning files in the controller state. Add a getTarget() member function to retrieve this string. Validate the correct hardware target ("bcm2835") during the IPA initialisation phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Fix default frame durations calculationNaushir Patuck
Fix a bug in the default frame durations calculation where the min/max values are swapped round. This is a rarely travelled code path, so has not actually caused a reported failure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Ensure shutter speed and gain are clipped in the AGCNaushir Patuck
Make a copy of the CameraMode structure on a switch mode call. This replaces the existing lastSensitivity_ field. Limit the AGC gain calculations to the minimum value given by the CameraMode structure. The maximum value remains unclipped as any gain over the sensor maximum will be made up by digital gain. Rename clipShutter to limitShutter for consistency, and have the latter limit the shutter speed to both upper and lower bounds. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Use the new sensor limits fields in CameraModeNaushir Patuck
Use the new analogue gain and shutter speed limit fields in the ipa code when reporting back the control value limits and calculating the analogue gain code to use. This also replaces the now unused (and removed) maxSensorGainCode_ field. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Add sensor mode limits to CameraModeNaushir Patuck
Add fields in the CameraMode structure to capture the mode specific limits for analogue gain and shutter speed. For convenience, also add fields for minimum and maximum frame durations. Populate these new fields when setting up the CameraMode structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21ipa: raspberrypi: Fix crash under LTODave Jones
When compiled with LTO (the default on Ubuntu), the global static objects camHelpers and algorithms cause a crash in raspberrypi_ipa_proxy at runtime as they're not allocated by the time the registration routines execute. This is a fairly crude fix which just converts the global static objects into local static objects inside an equivalently named function. Signed-off-by: Dave Jones <dave.jones@canonical.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: imx296: Minor tuning updatesDavid Plowman
Some updates to the tuning for the imx296 sensors. For the colour variant: * Minor change to the AWB curve, making things a little less green. * Updated CCMs that reduce colour saturation to a more accurate level. Thanks to Dr. Rolf Henkel for these measurements and calculations. * Sharpening has been toned down quite a lot. * rpi.focus algorithm added so that the focus measure can be accessed. The sharpening and focus changes are applied to the mono version of the sensor too as we expect similar characteristics. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: agc: Fix overflow in Y value calculationDavid Plowman
The maxVal variable in the computeInitialY function needs to be a uint64_t, otherwise the subsequent multiplications in the function can overflow on relatively high resolution images (when the counts in the regions go over 16 bits). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: Better heuristics for calculating Unicam timeoutNaushir Patuck
The existing mechanism of setting a timeout value simply uses the maximum possible frame length advertised by the sensor mode. This can be problematic when, for example, the IMX477 sensor can use a frame length of over 600 seconds. However, for typical usage the frame length will never go over several 100s of milliseconds, making the timeout very impractical. Store a list of the last 10 frame length values requested by the AGC. On startup, and at the end of every frame, take the maximum frame length value from this list and return that to the pipeline handler through the setCameraTimeoutValue() signal. This allows the timeout value to better track the actual sensor usage. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: ipa: raspberrypi: Change Unicam timeout handlingNaushir Patuck
Add an explicit helper function setCameraTimeout() in the pipeline handler to set the Unicam timeout value. This function is signalled from the IPA to set up an appropriate timeout. This replaces the maxSensorFrameLengthMs value parameter returned back from IPARPi::start(). Adjust the timeout to be 5x the maximum frame duration reported by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Normalise region sums to 16-bitsNaushir Patuck
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to know this bit-depth when computing the Y value for the image. Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all region sums to 16-bits when filling the Statistics structure. AWB and ALSC are agnostic about pipeline depth, so do not need changing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Use the generic statistics structure in the algorithmsNaushir Patuck
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to shared_ptr<RPiController::Statistics>. This removes any hardware specific header files and structures from the algorithms source code. Add a new function in the Raspberry Pi IPA to populate the generic statistics structure from the values provided by the hardware in the bcm2835_isp_stats structure. Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the generic statistics structure appropriately in their calculations. Additionally, remove references to any hardware specific headers and defines in these source files. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: awb: Delay release of the statistics bufferNaushir Patuck
Release the statistics buffer after running the through the AWB calculations. Only the "counted" statistics are copied out to a local structure, so keeping the statistics buffer allows the algorithm to see the "uncounted" statistics as well. This is currently handled by hard-coding the total number of statistics regions regions based on the structure definition in the bcm2835_isp_stats structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: histogram: Add a constructor for an empty histogramNaushir Patuck
Add a default constructor to the RPiController::Histogram class that creates an empty histogram. Since this is a cumulative histogram, push a value of 0 into the first (and only) bin to signify this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Generalise statisticsNaushir Patuck
At present, the controller algorithms access the bcm2835_isp_stats structure, which is hardware specific. It would be desirable to abstract out the statistics structure to remove hardware specific headers from the algorithms source files. Define a new templated RegionStats class that encompasses region based statistics generated by the ISP. For the VC4 ISP, this can be used to hold RGB sums and focus FoM values. Define a new Statistics structure that holds all the VC4 ISP statistics output. This includes AGC histograms, AGC/AWB region sums and focus FoM regions. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add support for the Sony IMX708 sensorNick Hollinghurst
Add support for Raspberry Pi Camera 3 modules (Sony IMX708 camera sensor) to the Raspberry Pi IPA. These modules are available in either normal or wide angle lens, both with IR or no IR cut options, giving a total for 4 variants. Provide IQ tuning files for all four variants. The IMX708 camera helper additionally parses PDAF and HDR histogram data that is provided in the embedded data stream from Unicam. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add lens position to DeviceStatusNaushir Patuck
Add the current frame's lens position (in dioptres) to the DeviceStatus structure. This value is obtained from the AfAlgorithm::getLensPosition() member function. Return this lens position back to the pipeline handler to store in the metadata field of the request. As a drive-by, fixup some inaccurate comments in the DeviceStatus structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: First version of autofocus algorithm using PDAFNick Hollinghurst
Provide the first version of the Raspberry Pi autofocus algorithm. This implementation uses a hybrid of contrast detect autofocus (CDAF) and phase detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to having less "hunting" behavior. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus algorithm resultsNick Hollinghurst
Handle the results returned from the autofocus algorithm by updating lens actuator position to the desired value. Update the Request metadata with the algorithm status to provide back to the application. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus controlsNick Hollinghurst
Add handlers for all autofocus related libcamera controls. Translate these controls to the RPiController autofocus algorithm API. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Include autofocus controls in the IPA ControlInfoMapNaushir Patuck
Add all the autofocus controls handled by the IPA into the ControlInfoMap if a controllable lens actuator is present. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Reorder header file inclusionNaushir Patuck
Reorder the libcamera/request header file inclusion to match the libcamera guidelines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add autofocus algorithm interface headersNick Hollinghurst
Add a new AfAlgorithm class that defines the interface for the Raspberry Pi autofocus algorithm. Add an AfStatus structure that returns the results of the autofocus algorithm back to the IPA. Add a structure for PDAF statistics provided by supported sensors for use with an autofocus algorithm. This structure is currently based on the IMX708's PDAF "Type 1" statistics. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Validate lens controlsNaushir Patuck
Pass the available lens controls to the IPA through the configure() function. Validate that the V4L2_CID_FOCUS_ABSOLUTE does exist. If it doesn't, log a warning message, and do not advertise focus related controls from the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Replace entityControlsNaushir Patuck
Replace the legacy entityControls map passed into ipa::configure() with explicit fields for sensor and ISP controls. This removes any ambiguity over which set of controls corresponds with specific integer keys. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Remove unused streamConfigNaushir Patuck
Remove the streamConfig parameter from the ipa::configure() call, it is never used. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Check if lens actuator is availableNaushir Patuck
Check if a lens actuator is available by the presense of the lens driver entity in the pipeline handler. Pass this result to the IPA on init. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-22ipa: raspberrypi: Fix permissions on imx477_scientific.jsonLaurent Pinchart
The imx477_scientific.json file was added to the source tree with incorrect executable permission. Fix it. Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-19ipa: raspberrypi: Add a "scientific" tuning for the IMX477Naushir Patuck
Add a tuning file for the IMX477 more suited to scientific applications. The key differences from the original tuning file are: - Disable ALSC block completely - Pure rec709 gamma curve, and no contrast enhance - New CT curve and CCMs based on the illumination spectrum of a black body radiator up to about 3600 K and the CIE illuminant D for higher color temperatures. Further details on the changes can be found at: https://forums.raspberrypi.com/viewtopic.php?t=343449 All credit for these changes go to Dr. Rolf Henkel. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: imx477: Update tuning file for the latest camera modulesDavid Plowman
The latest camera modules have a very slightly different IR filter, so the tuning file is slightly revised to give best results with both old and new camera modules. The original tuning file is retained as imx477_v1.json in case anyone should wish to continue using it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: Fix bug in IPA frame drop logicNaushir Patuck
Fix a bug in the IPA frame dropping (for rate control) logic, where the metadata for the current context was copied from itself (i.e. a no-op), instead of being copied from the previous context. This bug does not occur in normal conditions, only when running with a low exposure time and unconstrained framerate, which happens in a particular picamera2 test. Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: ipa: raspberrypi: Use IPA cookiesNaushir Patuck
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to the pipeline handler through the setDelayedControls signal. This cookie is used to index the RPiController::Metadata object to be used for the frame. The IPA cookie is then returned from DelayedControls when the frame with the applied controls has been returned from the sensor, and eventually passed back to the IPA from the signalIspPrepare signal. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Use an array of RPiController::Metadata objectsNaushir Patuck
Allow the IPA to cycle through an array of RPiController::Metadata objects, one per prepare()/process() invocation, when running the controller algorithms. This allows historical metadata objects to be retained, and subsequently passed into the controller algorithms on future frames. At present, only a single index into this array is used. This change provides a route to fixing a problem with the AGC algorithm, where if a manual shutter/gain is requested, the algorithm does not currently retain any context of the total exposure that it has calculated. As a result, the wrong digital gain would be applied when the frame with the manual shutter/gain is processed by the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Add RPiController::Metadata::mergeCopyNaushir Patuck
Add a new member function to RPiController::Metadata that copies unique key/value pairs from one object to the other. This is different from std::map::merge that would remove the key/value pairs from the source object. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-23pipeline: raspberrypi: Remove enum BuffferMask from the mojom interfaceNaushir Patuck
The BufferMask enum provides a way of identifying which stream a frame buffer belongs to. This enum is defined in the raspberrypi.mojom interface file. However, the IPA does not need these enum definitions to mmap buffers that it uses. Move this enum out of the raspberrypi.mojom interface file and put it into the RPi namespace visible only to the pipeline handler. This removes the need to include the auto-generated IPA interface header in the RPi::Stream definition. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-21ipa: raspberrypi: Remove generic "pause" mechanism from AlgorithmNick Hollinghurst
No existing Algorithm used the base pause(), resume() functions or the paused_ flag, nor is there a need for a generic pause API. Remove these. The AGC and AWB algorithms now have methods named disableAuto(), enableAuto() which better describe their functionality. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-28ipa: raspberrypi: awb: Update colour temperature whenever manual gains changeDavid Plowman
Previously we only did this when the system starts (on the first switch_mode). Now we do it whenever the manual colour gains are updated. To facilitate this, this R/B vs. colour temperature inverse functions are stored persistently in the AwbConfig. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: raspberry: replace abs() with std::abs()Nicholas Roth
pwl.cpp uses abs() instead of std::abs(), which causes unexpected behavior in the Clang compiler used for Android. Replace with C++-standard absolute value function std::abs(), which supports double-precision absolute values in a standard way. Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: add missing thread-safety annotationsNicholas Roth
The raspberrypi IPA is missing thread-safety annotations, which breaks the build. Add required thread-safety annotations. ../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex 'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis] void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex acquired here void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis] void unlock() { mutex_.unlock(); } ^ Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>