| Age | Commit message (Collapse) | Author |
|---|
|
Simplify name-spacing of the RPi components by placing it in the
ipa::RPi namespace directly. It also aligns the RPi IPA with the other
ones (ipa::ipu3 and ipa::rkisp1) which already have this applied.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Enable the V4L2VideoDevice dequeue timeout for the Unicam Image node, and
connect the timeout signal to a slot in the pipeline handler. This slot will
log an error message informing the user of a possible hardware stall.
The timeout is calculated as 2x the maximum frame length possible for a given
mode, returned by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The AwbAuto mode is defined in all the JSON tuning files as "auto",
not "normal". The effect of this was that you couldn't switch back to
"auto" mode once you had switched away.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the controller algorithms running at 60fps, there are some dropped frames
when running at very high famerates. Reducing this to 30fps eliminates all these
drops without any noticeable changes to the image quality.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Limit the gain code to the maximum value reported by the sensor controls
when sending to DelayedControls. The AGC algorithm will handle a lower
gain used by the sensor, provided it knows the actual gain used. This
change ensures that DelayedControls will never report an unclipped gain
used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For consistency with UniqueFD, rename the fd() function to get().
Renaming UniqueFD::get() to fd() would have been another option, but was
rejected to keep as close as possible to the std::shared_ptr<> and
std::unique_ptr<> APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The FileDescriptor class is a generic helper that matches the criteria
for the base library. Move it there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When the pipeline handler start() method is supplied with a NULL list
of controls, we send an empty control list to the IPA. When the IPA is
running in isolated mode the control list goes through the data
serializer, for which it must be marked correctly as a list of
"controls::controls", otherwise the IPA process will abort.
The IPA has a similar problem returning a control list in its
configure() method. We must be careful to initialise it properly even
when empty.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
MappedFrameBuffer::maps() returns planes_. This renames the function
name to planes().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the need for callers to reference PROT_READ/PROT_WRITE directly
from <sys/mman.h> by instead exposing the Read/Write mapping options as
flags from the MappedFrameBuffer class itself.
While here, introduce the <stdint.h> header which is required for the
uint8_t as part of the Plane.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MappedFrameBuffer is a convenience feature which sits on top of the
FrameBuffer and facilitates mapping it to CPU accessible memory with
mmap.
This implementation is internal and currently sits in the same internal
files as the internal FrameBuffer, thus exposing those internals to
users of the MappedFramebuffer implementation.
Move the MappedFrameBuffer and MappedBuffer implementation to its own
implementation files, and fix the sources throughout to use that
accordingly.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We use the CamHelper class to initialise it to the usual value of 1.
The CamHelper's GetModeSensitivity method can be redefined to
implement a different behaviour for sensors that require it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Return controls::FrameDuration through the per-frame Request metadata.
The frame duration is obtained by either the value in DelayedControls,
or (preferably) the value parsed from the embedded data buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/DefaultAnalogueGain/defaultAnalogueGain/
s/DefaultExposureTime/defaultExposureTime/
Change these for consistency with the other static const variables.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the recent change to allow long exposures on the imx477, the existing 100s
limit was not adequate.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Store the frame length into the DeviceStatus struct. The value is extracted
from embedded data when available, or calculated from the VBLANK value passed
from DelayedControls otherwise.
Update imx477 and imx219 CamHelper classes to extract the frame length from the
embedded data buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an operator<< overload to log all fields in DeviceStatus, and remove the
manual logging statements in the IPA and CamHelper.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move span, and adjust the Doxygen exclusion as well.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Convert the core AGC and Lux controller code to use
utils::Duration for all exposure time related variables and
calculations.
Convert the exposure/shutter time fields in AgcStatus and DeviceStatus
to use utils::Duration.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the AgcAlgorithm API functions to use utils::Duration for all
time based variables.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the ipa and cam_helper code to use libcamera::utils::Duration for
all time based variables. This improves code readability and avoids
possible errors when converting between time bases.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need a separate control to report the nominal frame duration, but
it's also useful to report the min/max frame duration values that will
be used. Split the FrameDurations control into FrameDuration and
FrameDurationLimits respectively to support both of these.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This matches the naming convention for IPA IPC.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraSensorInfo structure is designed to pass in camera sensor related
information from pipeline-handler to IPA. Since the pipeline-handler
and IPA are connected via mojom IPC IPA interface, the interface
itself provides a more suitable placement of CameraSensorInfo,
instead of camera_sensor.h (which is a libcamera internal header
ultimately, at this point).
As CameraSensorInfo is already defined in core.mojom, it is just
a matter of removing [skipHeader] tag to allow code-generation
of CameraSensorInfo.
Finally, update header paths to include CameraSensorInfo definition
from IPA interfaces instead of "libcamera/internal/camera_sensor.h".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The controller algorithms currently run on every frame provided to the
IPA by the pipeline handler. This may be undesirable for very fast fps
operating modes where it could significantly increase the computation
cycles (per unit time) without providing any significant changes to the
IQ parameters. The added latencies could also cause dropped frames.
Pass the FrameBuffer timestamp to the IPA through the controls. This
timestamp will be used to rate-limit the controller algorithms to run
with a minimum inter-frame time given by a compile time constant,
currently set to 16.66ms. On startup, we don't rate-limit the algorithms
until after the number of frames required for convergence.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Store the number of dropped frames on startup in a member variable. This
will be used in a subsequent change for rate limiting the controller
algorithms.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CamHelpers get virtual Prepare() and Process() methods, running just
before and just after the ISP, just like Raspberry Pi Algorithms.
The Prepare() method is able to parse the register dumps in embedded
data buffers, and can be specialised to perform custom processing when
necessary.
The IPA itself only needs to call the new Prepare() and Process()
methods. It must fill in the DeviceStatus from the controls first, in
case the Prepare() method does not supply its own values.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/Return the validated limits out though metadata./
Return the validated limits via metadata./
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The exact same comment is used two times within 5 lines.
Remove one of them as it is redundant.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename ConfigInput to IPAConfig to be more consistent with the naming,
and remove ConfigInput::op, as it is never used.
Replace ConfigOutput with a ControlList type, as that is the only return
type from ipa::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Separate out the in and out parameters in ipa::start() as they are not
the same. This function now takes in a ControlList and returns out a
struct StartConfig which holds a ControlList and drop frame count for
the pipeline handler to action.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The lastMode_ member variable is now unused, so remove it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The controller initialise is a one-off operation, so move it from
ipa::configure() to ipa::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the opening of the CamHelper from ipa::configure() to ipa::init().
This allows the pipeline handler to get the sensor specific parameters
in pipeline_handler::match() where the ipa is initialised.
Having the sensor parameters available earlier will allow selective
use of the embedded data node in a future change.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that we support returning int directly in addition to other output
parameters, improve the configure() function in the raspberrypi IPA
interface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The name vblankDelay is clearer.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For some sensors (e.g. imx477) we need to update the vblanking on the
frame before the exposure. For this reason the GetDelays method must
also return the number of frame delays for the vblanking control.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When running with sensors that had no embedded data, the pipeline handler
would fill a dummy embedded data buffer with gain/exposure values, and
pass this buffer to the IPA together with the bayer buffer. The IPA would
extract these values for use in the controller algorithms.
Rework this logic entirely by having a new RPiCameraData::BayerFrame
queue to replace the existing bayer queue. In addition to storing the
FrameBuffer pointer, this also stores all the controls tracked by
DelayedControls for that frame in a ControlList. This includes include
exposure and gain values. On signalling RPi::IPA_EVENT_SIGNAL_ISP_PREPARE
IPA event, the pipeline handler now passes this ControlList from the
RPiCameraData::BayerFrame queue.
The IPA now extracts the gain and exposure values from the ControlList
instead of using RPiController::MdParserRPi to parse the embedded data
buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the IPA interface namespace to ipa::RPi for consistency with
the libcamera::RPi namespace label.
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit addresses a couple of tidy-ups after the IPAInterface
rework:
- Rename ConfigStaggeredWrite -> ConfigSensorParams
- Rename setIsp -> setIspControls
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A camera tuning is not required to load an SDN algorithm. In keeping
with other controls, do not fail when a particular control was
expecting this algorithm, just warn that it is not present.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove everything related to the C API, including ipa_context,
ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant
documentation.
ipaCreate() provided by IPA implementations, and createInterface()
provided by IPAModule (wrapper around IPA implementation) both now
return a C++ object IPAInterface instead of struct ipa_context.
Although IPAInterfaceWrapper is the only component of libipa, the
skeleton and build files for libipa are retained.
After converting the C API to the C++-only API, make all pipeline
handlers and IPAs use the new API.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
This is a combination of 21 commits:
---
libcamera: IPAModule: Replace ipa_context with IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate_() and createInterface()
return IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: ipa_context_wrapper: Remove ipa_context_wrapper
Since ipa_context has been replaced with custom IPAInterfaces, it is not
longer needed. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: remove ipa_context and functions from documentation
Remove all the documentation related to ipa_context and the C IPA API,
as well as the documentation about the functions in the IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAInterface: Remove all functions from IPAInterface
Now that all the functions in the IPA interface are defined in the data
definition file and a specialized IPAInterface is generated per pipeline
handler, remove all the functions from the base IPAInterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAInterface: make ipaCreate return IPAInterface
With the new IPC infrastructure, we no longer need the C interface as
provided by struct ipa_context. Make ipaCreate return IPAinterface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
ipa: remove IPAInterfaceWrapper
As every pipeline has its own proxy, IPAInterfaceWrapper is no
longer necessary. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
libcamera: IPAProxy: Remove stop() override
Since stop() is part of the IPA interface, and the IPA interface is now
generated based on the data definition file per pipeline, this no longer
needs to be overrided by the base IPAProxy. Remove it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme
IPAProxy is changed in two major ways:
- Every pipeline has its own proxy, to support each pipeline's IPA
interface
- IPAProxy implementations always encapsulate IPA modules, and switch
internally for isolation or threaded
The IPAProxy registration mechanism is removed, as each pipeline will
have its own proxy, so the pipeline can pass the specialized class name
of the IPAProxy to the IPAManager for construction.
IPAManager is changed accordingly to support these changes:
- createIPA is a template function that takes an IPAProxy class, and
always returns an IPAProxy
- IPAManager no longer decides on isolation, and simply creates an
IPAProxy instance while passing the isolation flag
Consequently, the old IPAProxy classes (IPAProxyThread and
IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use
the new IPAManager interface, and to construct a ProcessManager as no
single global instance is created anymore.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
---
libcamera: IPAProxy: Add isolate parameter to create()
Since IPAProxy implementations now always encapsulate IPA modules, add a
parameter to create() to signal if the proxy should isolate the IPA or not.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline
Now that each pipeline handler has its own IPAProxy implementation, make
the IPAManager fetch the IPAProxy based on the pipeline handler name.
Also, since the IPAProxy is used regardless of isolation or no
isolation, remove the isolation check from the proxy selection.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
---
libcamera: IPAManager: add isolation flag to proxy creation
When the IPA proxy is created, it needs to know whether to isolate or
not. Feed the flag at creation of the IPA proxy.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAManager: Make createIPA return proxy directly
Since every pipeline knows the type of the proxy that it needs, and
since all IPAs are to be wrapped in a proxy, IPAManager no longer needs
to search in the factory list to fetch the proxy factory to construct a
factory. Instead, we define createIPA as a template function, and the
pipeline handler can declare the proxy type when it calls createIPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: IPAProxy: Remove registration mechanism
Implementations of IPA proxies use a registration mechanism to register
themselves with the main IPA proxy factory. This registration declares
static objects, causing a risk of things being constructed before the
proper libcamera facilities are ready. Since each pipeline handler has
its own IPA proxy and knows the type, it isn't necessary to have a proxy
factory. Remove it to alleviate the risk of early construction.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread
We have now changed the proxy from per-IPC mechanism to per-pipeline.
The per-IPC mechanism proxies are thus no longer needed; remove them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
tests: ipa_interface_test: Update to use new createIPA
Update the IPA interface test to use the new createIPA function from
IPAManager. Also create an instance of ProcessManager, as no single
global instance is created automatically anymore. Update meson.build to
to depend on the generated IPA interface headers.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: PipelineHandler: Remove IPA from base class
Since pipeline handlers now have their own IPA interface types, it can no
longer be defined in the base class, and each pipeline handler
implementation must declare it and its type themselves. Remove it from
the base class.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
ipa: raspberrypi: Add mojom data definition file
Add a mojom data definition for raspberrypi pipeline handler's IPAs.
This simplifies the API between the raspberrypi pipeline handler and the
IPA, and is not a direct translation of what was used before with
IPAOperationData.
Also move the enums from raspberrypi.h to raspberrypi.mojom
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: raspberrypi: Use new data definition
Now that we can generate custom functions and data structures with mojo,
switch the raspberrypi pipeline handler and IPA to use the custom data
structures as defined in the mojom data definition file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: vimc: Support the new IPC mechanism
Add support to vimc pipeline handler and IPA for the new IPC mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
---
libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism
Add support to the rkisp1 pipeline handler and IPA for the new IPC
mechanism.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism
Add support to ipu3 pipeline handler and IPA for the new IPC mechanism.
[Original version]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Fixed commit message and small changes]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The application provided noise reduction mode gets passed into the
denoise controller. The denoise controller in turn returns the mode to
the IPA which now sets up the colour denoise processing appropriately.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change is in anticipation of the addition of a DenoiseAlgorithm
base class which the SDN class will derive from. We want to match the
metadata object name with the base class algorithm name.
This renames:
- SdnStatus metadata object to DenoiseStatus
- "sdn.status" metadata string key to "denoise.status"
- sdn_status.h header file to denoise_status.h
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to provide an optimal split between shutter speed and gain, the
AGC must know the maximum allowable shutter speed, as limited by the
maximum frame duration (either application provided or the default).
Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The
IPA provides the maximum shutter speed for AGC calculations. This
applies to both the manual and auto AGC modes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The existing framerate/vblank calculations did not account for the
sensor mode limits. This commit extracts vblank limits from the sensor
v4l2 controls, and stores it in the camera modes structure.
Exposure and vblank value calculations now use values clamped to the
sensor mode limits. The libcamera::controls::FrameDurations metadata
return values now reflect the minimum and maximum after clamping.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
