summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/raspberrypi.cpp
AgeCommit message (Collapse)Author
2020-07-17ipa: raspberrypi: Pass sensor config back from configure()Laurent Pinchart
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG frame action to send the sensor staggered write configuration to the pipeline handler when the IPA is configured. Replace this ad-hoc mechanism by passing the corresponding data back from the IPA to the pipeline handler through the configure() response. This allows synchronous handling of the response on the pipeline handler side. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17ipa: raspberrypi: Pass lens shading table through configure() functionLaurent Pinchart
The IPAInterface::configure() function now accepts custom configuration data. Use it to pass the lens shading table instead of using a custom IPA event. This will allow starting the IPA when starting the camera, instead of pre-starting it early in order to process the lens shading table allocation event. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17ipa: raspberrypi: Drop CameraHelper::GetOrientation()Laurent Pinchart
The camera sensor orientation is now handled by the pipeline handler. Drop hardcoded per-sensor orientations from the IPA. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17libcamera: ipa_interface: Add support for custom IPA data to configure()Laurent Pinchart
Add two new parameters, ipaConfig and result, to the IPAInterface::configure() function to allow pipeline handlers to pass custom data to their IPA, and receive data back. Wire this through the code base. The C API interface will be addressed separately, likely through automation of the C <-> C++ translation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06libcamera: ipa: raspberrypi: Populate focus FoM from the ISP statisticsNaushir Patuck
Switch FocusStatus::num to unsigned int for convenience. Fill in libcamera::controls::FocusFoM with the average of the middle two regions (across a 4x3 grid) FoM statistics from the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-06ipa: raspberrypi: Populate libcamera metadata after controller processNaushir Patuck
For control algorithms like focus, this is needed to return out the the current frame focus statistics. For other algorithms, there is no functional change. Signed-off-By: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Plumb in the libcamera sharpness controlDavid Plowman
This simply wires up the libcamera sharpness control in the Raspberry Pi IPAs so that it controls the strength of the Raspberry Pi sharpness control algorithm. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Recalculate camera exposure/gain when camera ↵David Plowman
mode changes This commit causes the AGC to recalculate its camera exposure/gain values when the camera mode changes. For example it's possible that the exposure profile could be changed by the application so the division between exposure time and analogue gain may be different. The other underlying reason (and which this commit accomplishes too) is that the sensor's line timing may change in a new mode, and because V4L2 drivers store a number of exposure _lines_, the resulting _time_ will "change under our feet". So we have to go through the process of recalculating the correct number of lines and writing this back to the sensor with every mode switch, regardless of anything else. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Allow SwitchMode method to return camera settingsDavid Plowman
This commit adds a Metadata parameter to the SwitchMode method enabling it to return camera and other settings to the caller (usually the configure method, just after the camera mode has been selected). In future this will allow the Raspberry Pi IPAs to take those settings (such as exposure and analogue gain) and program them directly into the camera or ISP before the camera is even started. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-16libcamera: Move IPA headers from include/ipa/ to include/libcamera/ipa/Laurent Pinchart
The IPA headers are installed into $prefix/include/libcamera/ipa/, but are located in the source tree in include/ipa/. This requires files within libcamera to include them with #include <ipa/foo.h> while a third party IPA would need to use #include <libcamera/ipa/foo.h> Not only is this inconsistent, it can create issues later if IPA headers need to include each other, as the first form of include directive wouldn't be valid once the headers are installed. Fix the problem by moving the IPA headers to include/libcamera/ipa/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move internal headers to include/libcamera/internal/Laurent Pinchart
The libcamera internal headers are located in src/libcamera/include/. The directory is added to the compiler headers search path with a meson include_directories() directive, and internal headers are included with (e.g. for the internal semaphore.h header) #include "semaphore.h" All was well, until libcxx decided to implement the C++20 synchronization library. The __threading_support header gained a #include <semaphore.h> to include the pthread's semaphore support. As include_directories() adds src/libcamera/include/ to the compiler search path with -I, the internal semaphore.h is included instead of the pthread version. Needless to say, the compiler isn't happy. Three options have been considered to fix this issue: - Use -iquote instead of -I. The -iquote option instructs gcc to only consider the header search path for headers included with the "" version. Meson unfortunately doesn't support this option. - Rename the internal semaphore.h header. This was deemed to be the beginning of a long whack-a-mole game, where namespace clashes with system libraries would appear over time (possibly dependent on particular system configurations) and would need to be constantly fixed. - Move the internal headers to another directory to create a unique namespace through path components. This causes lots of churn in all the existing source files through the all project. The first option would be best, but isn't available to us due to missing support in meson. Even if -iquote support was added, we would need to fix the problem before a new version of meson containing the required support would be released. The third option is thus the only practical solution available. Bite the bullet, and do it, moving headers to include/libcamera/internal/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-11libcamera: ipa: Raspberry Pi IPANaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and associated libraries. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>