summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/raspberrypi.cpp
AgeCommit message (Collapse)Author
2023-04-12ipa: raspberrypi: agc: Add "shadows" constraint modeDavid Plowman
The "shadows" constraint mode actually exists in a number of tuning files, but had been omitted from the list of supported modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the focus reporting codeNaushir Patuck
Use the generalised focus statistics structure to compute the centre window focus FoM value. This avoids needed to hard-code a specific grid size. Remove the focus reporting algorithm as the functionality is duplicated by this bit of IPA code. Remove focus_status.h as it is no longer needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the contrast algorithmNaushir Patuck
Generalise the contrast algorithm code by removing any hard-coded assumptions about the target hardware platform. Instead, the algorithm code creates a generic Pwl that gets returned to the IPA, where it gets converted to the bcm2835 hardware specific lookup table. As a drive-by, remove an unused mutex. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the ALSC algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the ALSC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. The ALSC calculations use run-time allocated arrays/vectors on every frame. Allocating these might add a non-trivial run-time penalty. Replace these dynamic allocations with a set of reusable pre-allocated vectors during the init phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Add hardware configuration to the controllerNaushir Patuck
Add a new Controller::HardwareConfig structure that captures the hardware statistics grid/histogram sizes and pipeline widths. This ensures there is a single centralised places for these parameters. Add a getHardwareConfig() helper function to retrieve these values for a given hardware target. Update the statistics populating routine in the IPA to use the values from this structure instead of the hardcoded numbers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi Store the target string in the controllerNaushir Patuck
The target string may be used by algorithms to determine the running hardware target. Store the target string provided by the camera tuning files in the controller state. Add a getTarget() member function to retrieve this string. Validate the correct hardware target ("bcm2835") during the IPA initialisation phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Fix default frame durations calculationNaushir Patuck
Fix a bug in the default frame durations calculation where the min/max values are swapped round. This is a rarely travelled code path, so has not actually caused a reported failure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Use the new sensor limits fields in CameraModeNaushir Patuck
Use the new analogue gain and shutter speed limit fields in the ipa code when reporting back the control value limits and calculating the analogue gain code to use. This also replaces the now unused (and removed) maxSensorGainCode_ field. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Add sensor mode limits to CameraModeNaushir Patuck
Add fields in the CameraMode structure to capture the mode specific limits for analogue gain and shutter speed. For convenience, also add fields for minimum and maximum frame durations. Populate these new fields when setting up the CameraMode structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: Better heuristics for calculating Unicam timeoutNaushir Patuck
The existing mechanism of setting a timeout value simply uses the maximum possible frame length advertised by the sensor mode. This can be problematic when, for example, the IMX477 sensor can use a frame length of over 600 seconds. However, for typical usage the frame length will never go over several 100s of milliseconds, making the timeout very impractical. Store a list of the last 10 frame length values requested by the AGC. On startup, and at the end of every frame, take the maximum frame length value from this list and return that to the pipeline handler through the setCameraTimeoutValue() signal. This allows the timeout value to better track the actual sensor usage. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: ipa: raspberrypi: Change Unicam timeout handlingNaushir Patuck
Add an explicit helper function setCameraTimeout() in the pipeline handler to set the Unicam timeout value. This function is signalled from the IPA to set up an appropriate timeout. This replaces the maxSensorFrameLengthMs value parameter returned back from IPARPi::start(). Adjust the timeout to be 5x the maximum frame duration reported by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Normalise region sums to 16-bitsNaushir Patuck
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to know this bit-depth when computing the Y value for the image. Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all region sums to 16-bits when filling the Statistics structure. AWB and ALSC are agnostic about pipeline depth, so do not need changing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Use the generic statistics structure in the algorithmsNaushir Patuck
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to shared_ptr<RPiController::Statistics>. This removes any hardware specific header files and structures from the algorithms source code. Add a new function in the Raspberry Pi IPA to populate the generic statistics structure from the values provided by the hardware in the bcm2835_isp_stats structure. Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the generic statistics structure appropriately in their calculations. Additionally, remove references to any hardware specific headers and defines in these source files. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add lens position to DeviceStatusNaushir Patuck
Add the current frame's lens position (in dioptres) to the DeviceStatus structure. This value is obtained from the AfAlgorithm::getLensPosition() member function. Return this lens position back to the pipeline handler to store in the metadata field of the request. As a drive-by, fixup some inaccurate comments in the DeviceStatus structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus algorithm resultsNick Hollinghurst
Handle the results returned from the autofocus algorithm by updating lens actuator position to the desired value. Update the Request metadata with the algorithm status to provide back to the application. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus controlsNick Hollinghurst
Add handlers for all autofocus related libcamera controls. Translate these controls to the RPiController autofocus algorithm API. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Include autofocus controls in the IPA ControlInfoMapNaushir Patuck
Add all the autofocus controls handled by the IPA into the ControlInfoMap if a controllable lens actuator is present. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Reorder header file inclusionNaushir Patuck
Reorder the libcamera/request header file inclusion to match the libcamera guidelines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Validate lens controlsNaushir Patuck
Pass the available lens controls to the IPA through the configure() function. Validate that the V4L2_CID_FOCUS_ABSOLUTE does exist. If it doesn't, log a warning message, and do not advertise focus related controls from the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Replace entityControlsNaushir Patuck
Replace the legacy entityControls map passed into ipa::configure() with explicit fields for sensor and ISP controls. This removes any ambiguity over which set of controls corresponds with specific integer keys. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Remove unused streamConfigNaushir Patuck
Remove the streamConfig parameter from the ipa::configure() call, it is never used. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Check if lens actuator is availableNaushir Patuck
Check if a lens actuator is available by the presense of the lens driver entity in the pipeline handler. Pass this result to the IPA on init. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: Fix bug in IPA frame drop logicNaushir Patuck
Fix a bug in the IPA frame dropping (for rate control) logic, where the metadata for the current context was copied from itself (i.e. a no-op), instead of being copied from the previous context. This bug does not occur in normal conditions, only when running with a low exposure time and unconstrained framerate, which happens in a particular picamera2 test. Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: ipa: raspberrypi: Use IPA cookiesNaushir Patuck
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to the pipeline handler through the setDelayedControls signal. This cookie is used to index the RPiController::Metadata object to be used for the frame. The IPA cookie is then returned from DelayedControls when the frame with the applied controls has been returned from the sensor, and eventually passed back to the IPA from the signalIspPrepare signal. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Use an array of RPiController::Metadata objectsNaushir Patuck
Allow the IPA to cycle through an array of RPiController::Metadata objects, one per prepare()/process() invocation, when running the controller algorithms. This allows historical metadata objects to be retained, and subsequently passed into the controller algorithms on future frames. At present, only a single index into this array is used. This change provides a route to fixing a problem with the AGC algorithm, where if a manual shutter/gain is requested, the algorithm does not currently retain any context of the total exposure that it has calculated. As a result, the wrong digital gain would be applied when the frame with the manual shutter/gain is processed by the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-23pipeline: raspberrypi: Remove enum BuffferMask from the mojom interfaceNaushir Patuck
The BufferMask enum provides a way of identifying which stream a frame buffer belongs to. This enum is defined in the raspberrypi.mojom interface file. However, the IPA does not need these enum definitions to mmap buffers that it uses. Move this enum out of the raspberrypi.mojom interface file and put it into the RPi namespace visible only to the pipeline handler. This removes the need to include the auto-generated IPA interface header in the RPi::Stream definition. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-21ipa: raspberrypi: Remove generic "pause" mechanism from AlgorithmNick Hollinghurst
No existing Algorithm used the base pause(), resume() functions or the paused_ flag, nor is there a need for a generic pause API. Remove these. The AGC and AWB algorithms now have methods named disableAuto(), enableAuto() which better describe their functionality. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Allow full line length controlNaushir Patuck
Rename CamHelper::getVBlanking to CamHelper::getBlanking, and update the calculations in that function to return both horizontal and vertical blanking values for a given exposure time and frame duration limits. The calculations are setup such that vertical blanking is extended to the maximum allowable value, and any remainder gets put into horizontal blanking. The calculated horizontal blanking value is now returned to the pipeline handler to pass into DelayedControls to program into the sensor. Update the IPA to now specify the maximum frame duration from the maximum horizontal + vertical blanking values provided by the sensor mode. Additionally, the IPA now uses the frame specific horizontal blanking value (as returned by DelayedControls) in all instances. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add line length to DeviceStatusNaushir Patuck
Add a lineLength field to the DeviceStatus structure to store the line length used for a particular frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add pixel clock rate to the CameraMode structureNaushir Patuck
The pixel clock rate will be used in subsequent commits to calculate line length durations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18pipeline: ipa: raspberrypi: Add HBLANK control to DelayedControlsNaushir Patuck
Update CamHelper::getDelays() to return the sensor HBLANK delay. The HBLANK delay is set to the same value as VBLANK delay for all sensors in the Raspberry Pi IPA. Return the HBLANK gain delay from the IPA to the pipeline handler, and initialise DelayedControls to handle V4L2_CID_HBLANK with this delay value. As a drive-by, check that the V4L2_CID_HBLANK control is available when calling IPARPi::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Pass lineLength into the CamHelper APINaushir Patuck
Update CamHelper::exposureLines() and CamHelper::exposure() to take a line length duration parameter for use in the exposure calculations. For now, only use the minimum line length for all the calculations to match the existing IPA behavior. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add minimum and maximum line length fields to CameraModeNaushir Patuck
Add fields for minimum and maximum line length duration to the CameraMode structure. This replaces the existing lineLength field. Any use of the existing lineLength field is replaced by the new minLineLength field, as logically we always want to use the fastest sensor readout by default. As a drive-by cosmetic change, split all fields in the CameraMode structure into separate lines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18camera_sensor: Add minimum and maximum line length to IPACameraSensorInfoNaushir Patuck
Add fields for minimum and maximum line length (in units of pixels) to the IPACameraSensorInfo structure. This replaces the existing lineLength field. Update the ipu3, raspberrypi and rkisp1 IPAs to use IPACameraSensorInfo::minLineLength instead of IPACameraSensorInfo::lineLength, as logically we will always want to use the fastest sensor readout by default. Since the IPAs now use minLineLength for their calculations, set the starting value of the V4L2_CID_HBLANK control to its minimum in CameraSensor::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-07ipa: raspberrypi: Remove unneeded Span castsLaurent Pinchart
Commit 09c1b081baa2 ("libcamera: controls: Generate and use fixed-sized Span types") added explicit Span casts for fixed extent spans that were required due to the ControlList::set() function that takes an std::initializer_list not being able to infer a control size from template arguments. This has now been fixed, so the casts are not needed anymore. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-08-21libcamera: Remove unused headersChristian Rauch
These headers are not used as reported by clangd. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-09libcamera: controls: Generate and use fixed-sized Span typesChristian Rauch
Define Span types explicitly as either variable- or fixed-sized. This introduces a new convention for defining Span dimensions in the property and control value definitions and generates Span types as variable-sized Span<T> or as fixed-sized Span<T,N>. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: raspberrypi: Use YamlParser to replace dependency on boostLaurent Pinchart
The Raspberry Pi IPA module depends on boost only to parse the JSON tuning data files. As libcamera depends on libyaml, use the YamlParser class to parse those files and drop the dependency on boost. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Return an error code from Algorithm::read()Laurent Pinchart
When encountering errors, the Algorithm::read() function either uses LOG(Fatal) or throws exceptions from the boost property_tree functions. To prepare for replacing boost JSON parse with the YamlParser class, give the Algorithm::read() function the ability to return an error code, and propagate it all the way to the IPA module init() function. All algorithm classes return a hardcoded 0 value for now, subsequent commits will change that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-27ipa: raspberrypi: Remove #define constantsNaushir Patuck
Replace all #define constant values with equivalent constexpr definitions. As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27raspberrypi: Update Copyright statement in all Raspberry Pi source filesNaushir Patuck
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new Raspberry Pi entity name. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Rename header files from *.hpp to *.hNaushir Patuck
As per the libcamera coding guidelines, rename all .hpp header files to .h. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Code refactoring to match style guidelinesNaushir Patuck
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended formatting guidelines for the libcamera project. The vast majority of changes in this commit comprise of switching from snake_case to CamelCase, and starting class member functions with a lower case character. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-19libcamera: controls: Use std::optional to handle invalid control valuesChristian Rauch
Previously, ControlList::get<T>() would use default constructed objects to indicate that a ControlList does not have the requested Control. This has several disadvantages: 1) It requires types to be default constructible, 2) it does not differentiate between a default constructed object and an object that happens to have the same state as a default constructed object. std::optional<T> additionally stores the information if the object is valid or not, and therefore is more expressive than a default constructed object. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Correctly report available control limitsNaushir Patuck
The ipa currently advertises a static ControlInfoMap to specify the available controls and their limits. Fix this limitation by having the IPA populate a new ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and FrameDurationLimits controls based on the current sensor mode. This new ControlInfoMap is then returned back to the pipeline handler and available to the application after a successful Camera::configure() call. Before the first call to Camera::configure(), this ControlInfoMap provides some reasonable default limits for ExposureTime, AnalogueGain, and FrameDurationLimits. However, applications must not rely on these values, but obtain the correct limits after the call to Camera::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Move ControlInfoMap to the IPANaushir Patuck
Currently the pipeline handler advertises controls handled by the IPA from a static ControlInfoMap defined in the raspberrypi.h header. This change removes this header file, and instead the IPA returns the ControlInfoMap to the pipeline handler from the ipa::init() function. This is done to allow the IPA to adjust the limits of the controls based on the sensor mode in a subsequent change. Bug: https://bugs.libcamera.org/show_bug.cgi?id=83 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Add sensor temperature to DeviceStatusNaushir Patuck
Add an optional sensor_temperature field to the DeviceStatus structure. If a temperature measurement is available for a frame, the value is returned out through the SensorTemperature control in the Request metadata. Additionally, provide the sensor temperature value from the std::ostream &operator<< overload. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10libcamera: raspberrypi: Fetch correct value for SensorSensitivityDavid Plowman
These changes retrieve the correct value for sensitivity of the mode selected for the sensor. This value is known to the CamHelper which passes it across to the pipeline handler so that it can be set correctly in the camera properties. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-09ipa: raspberrypi: Demote noisy message to DebugLaurent Pinchart
The message that prints all controls in a request in IPARPi::queueRequest() is noisy. Demote it from Info to Debug. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>