| Age | Commit message (Collapse) | Author |
|---|
|
Use the generalised focus statistics structure to compute the centre
window focus FoM value. This avoids needed to hard-code a specific
grid size.
Remove the focus reporting algorithm as the functionality is duplicated
by this bit of IPA code. Remove focus_status.h as it is no longer needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generalise the contrast algorithm code by removing any hard-coded
assumptions about the target hardware platform. Instead, the algorithm
code creates a generic Pwl that gets returned to the IPA, where it gets
converted to the bcm2835 hardware specific lookup table.
As a drive-by, remove an unused mutex.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the ALSC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
The ALSC calculations use run-time allocated arrays/vectors on every
frame. Allocating these might add a non-trivial run-time penalty.
Replace these dynamic allocations with a set of reusable pre-allocated
vectors during the init phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new Controller::HardwareConfig structure that captures the
hardware statistics grid/histogram sizes and pipeline widths. This
ensures there is a single centralised places for these parameters.
Add a getHardwareConfig() helper function to retrieve these values for a
given hardware target.
Update the statistics populating routine in the IPA to use the values
from this structure instead of the hardcoded numbers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The target string may be used by algorithms to determine the running
hardware target.
Store the target string provided by the camera tuning files in the
controller state. Add a getTarget() member function to retrieve this
string.
Validate the correct hardware target ("bcm2835") during the IPA
initialisation phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix a bug in the default frame durations calculation where the min/max
values are swapped round. This is a rarely travelled code path, so has
not actually caused a reported failure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the new analogue gain and shutter speed limit fields in the ipa
code when reporting back the control value limits and calculating the
analogue gain code to use. This also replaces the now unused (and
removed) maxSensorGainCode_ field.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add fields in the CameraMode structure to capture the mode specific
limits for analogue gain and shutter speed. For convenience, also add
fields for minimum and maximum frame durations.
Populate these new fields when setting up the CameraMode structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The existing mechanism of setting a timeout value simply uses the
maximum possible frame length advertised by the sensor mode. This can be
problematic when, for example, the IMX477 sensor can use a frame length
of over 600 seconds. However, for typical usage the frame length will
never go over several 100s of milliseconds, making the timeout very
impractical.
Store a list of the last 10 frame length values requested by the AGC. On
startup, and at the end of every frame, take the maximum frame length
value from this list and return that to the pipeline handler through the
setCameraTimeoutValue() signal. This allows the timeout value to better
track the actual sensor usage.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an explicit helper function setCameraTimeout() in the pipeline
handler to set the Unicam timeout value. This function is signalled from
the IPA to set up an appropriate timeout. This replaces the
maxSensorFrameLengthMs value parameter returned back from
IPARPi::start().
Adjust the timeout to be 5x the maximum frame duration reported by the
IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to
know this bit-depth when computing the Y value for the image.
Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all
region sums to 16-bits when filling the Statistics structure. AWB and ALSC are
agnostic about pipeline depth, so do not need changing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to
shared_ptr<RPiController::Statistics>. This removes any hardware specific header
files and structures from the algorithms source code.
Add a new function in the Raspberry Pi IPA to populate the generic statistics
structure from the values provided by the hardware in the bcm2835_isp_stats
structure.
Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the
generic statistics structure appropriately in their calculations. Additionally,
remove references to any hardware specific headers and defines in these source
files.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the current frame's lens position (in dioptres) to the DeviceStatus
structure. This value is obtained from the AfAlgorithm::getLensPosition()
member function. Return this lens position back to the pipeline handler to
store in the metadata field of the request.
As a drive-by, fixup some inaccurate comments in the DeviceStatus structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the results returned from the autofocus algorithm by updating lens
actuator position to the desired value. Update the Request metadata with the
algorithm status to provide back to the application.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add handlers for all autofocus related libcamera controls. Translate these
controls to the RPiController autofocus algorithm API.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add all the autofocus controls handled by the IPA into the ControlInfoMap if
a controllable lens actuator is present.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reorder the libcamera/request header file inclusion to match the libcamera
guidelines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the available lens controls to the IPA through the configure() function.
Validate that the V4L2_CID_FOCUS_ABSOLUTE does exist. If it doesn't, log a
warning message, and do not advertise focus related controls from the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the legacy entityControls map passed into ipa::configure() with explicit
fields for sensor and ISP controls. This removes any ambiguity over which set of
controls corresponds with specific integer keys.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the streamConfig parameter from the ipa::configure() call, it is never
used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Check if a lens actuator is available by the presense of the lens driver entity
in the pipeline handler. Pass this result to the IPA on init.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix a bug in the IPA frame dropping (for rate control) logic, where the
metadata for the current context was copied from itself (i.e. a no-op), instead
of being copied from the previous context.
This bug does not occur in normal conditions, only when running with a low
exposure time and unconstrained framerate, which happens in a particular
picamera2 test.
Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The digital gain calculation uses a total exposure value computed with the
current AGC state. However, this is wrong in the case of manual shutter/gain
controls, as the total exposure value used must be the value computed when the
AGC sent the manual shutter/gain controls to the pipeline handler to action.
To fix this, the IPA now adds the historical AgcStatus structure to the metadata
(tagged with "agc.delayed_status"). This historical AgcStatus structure contains
the total exposure value calculated when the AGC sent the manual shutter/gain
controls to the pipeline handler.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to
the pipeline handler through the setDelayedControls signal. This cookie is used
to index the RPiController::Metadata object to be used for the frame.
The IPA cookie is then returned from DelayedControls when the frame with the
applied controls has been returned from the sensor, and eventually passed back
to the IPA from the signalIspPrepare signal.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow the IPA to cycle through an array of RPiController::Metadata objects, one
per prepare()/process() invocation, when running the controller algorithms. This
allows historical metadata objects to be retained, and subsequently passed into
the controller algorithms on future frames. At present, only a single index into
this array is used.
This change provides a route to fixing a problem with the AGC algorithm, where
if a manual shutter/gain is requested, the algorithm does not currently retain
any context of the total exposure that it has calculated. As a result, the
wrong digital gain would be applied when the frame with the manual shutter/gain
is processed by the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The BufferMask enum provides a way of identifying which stream a frame buffer
belongs to. This enum is defined in the raspberrypi.mojom interface file.
However, the IPA does not need these enum definitions to mmap buffers that it
uses.
Move this enum out of the raspberrypi.mojom interface file and put it into
the RPi namespace visible only to the pipeline handler. This removes the
need to include the auto-generated IPA interface header in the RPi::Stream
definition.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
No existing Algorithm used the base pause(), resume() functions
or the paused_ flag, nor is there a need for a generic pause API.
Remove these. The AGC and AWB algorithms now have methods named
disableAuto(), enableAuto() which better describe their functionality.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename CamHelper::getVBlanking to CamHelper::getBlanking, and update the
calculations in that function to return both horizontal and vertical
blanking values for a given exposure time and frame duration limits. The
calculations are setup such that vertical blanking is extended to the
maximum allowable value, and any remainder gets put into horizontal
blanking.
The calculated horizontal blanking value is now returned to the pipeline
handler to pass into DelayedControls to program into the sensor.
Update the IPA to now specify the maximum frame duration from the
maximum horizontal + vertical blanking values provided by the sensor
mode. Additionally, the IPA now uses the frame specific horizontal
blanking value (as returned by DelayedControls) in all instances.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a lineLength field to the DeviceStatus structure to store the line
length used for a particular frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixel clock rate will be used in subsequent commits to calculate
line length durations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update CamHelper::getDelays() to return the sensor HBLANK delay. The
HBLANK delay is set to the same value as VBLANK delay for all sensors in
the Raspberry Pi IPA.
Return the HBLANK gain delay from the IPA to the pipeline handler, and
initialise DelayedControls to handle V4L2_CID_HBLANK with this delay
value.
As a drive-by, check that the V4L2_CID_HBLANK control is available when
calling IPARPi::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update CamHelper::exposureLines() and CamHelper::exposure() to take a
line length duration parameter for use in the exposure calculations.
For now, only use the minimum line length for all the calculations to
match the existing IPA behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length duration to the
CameraMode structure. This replaces the existing lineLength field.
Any use of the existing lineLength field is replaced by the new
minLineLength field, as logically we always want to use the fastest
sensor readout by default.
As a drive-by cosmetic change, split all fields in the CameraMode
structure into separate lines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length (in units of pixels) to
the IPACameraSensorInfo structure. This replaces the existing lineLength
field.
Update the ipu3, raspberrypi and rkisp1 IPAs to use
IPACameraSensorInfo::minLineLength instead of
IPACameraSensorInfo::lineLength, as logically we will always want to use
the fastest sensor readout by default.
Since the IPAs now use minLineLength for their calculations, set the
starting value of the V4L2_CID_HBLANK control to its minimum in
CameraSensor::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 09c1b081baa2 ("libcamera: controls: Generate and use fixed-sized
Span types") added explicit Span casts for fixed extent spans that were
required due to the ControlList::set() function that takes an
std::initializer_list not being able to infer a control size from
template arguments. This has now been fixed, so the casts are not needed
anymore. Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
These headers are not used as reported by clangd.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Define Span types explicitly as either variable- or fixed-sized. This
introduces a new convention for defining Span dimensions in the property
and control value definitions and generates Span types as variable-sized
Span<T> or as fixed-sized Span<T,N>.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Raspberry Pi IPA module depends on boost only to parse the JSON
tuning data files. As libcamera depends on libyaml, use the YamlParser
class to parse those files and drop the dependency on boost.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
When encountering errors, the Algorithm::read() function either uses
LOG(Fatal) or throws exceptions from the boost property_tree functions.
To prepare for replacing boost JSON parse with the YamlParser class,
give the Algorithm::read() function the ability to return an error code,
and propagate it all the way to the IPA module init() function.
All algorithm classes return a hardcoded 0 value for now, subsequent
commits will change that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Replace all #define constant values with equivalent constexpr definitions.
As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new
Raspberry Pi entity name.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As per the libcamera coding guidelines, rename all .hpp header files to .h.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended
formatting guidelines for the libcamera project. The vast majority of changes
in this commit comprise of switching from snake_case to CamelCase, and starting
class member functions with a lower case character.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previously, ControlList::get<T>() would use default constructed objects to
indicate that a ControlList does not have the requested Control. This has
several disadvantages: 1) It requires types to be default constructible,
2) it does not differentiate between a default constructed object and an
object that happens to have the same state as a default constructed object.
std::optional<T> additionally stores the information if the object is valid
or not, and therefore is more expressive than a default constructed object.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ipa currently advertises a static ControlInfoMap to specify the available
controls and their limits. Fix this limitation by having the IPA populate a new
ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and
FrameDurationLimits controls based on the current sensor mode. This new
ControlInfoMap is then returned back to the pipeline handler and available to
the application after a successful Camera::configure() call.
Before the first call to Camera::configure(), this ControlInfoMap provides some
reasonable default limits for ExposureTime, AnalogueGain, and
FrameDurationLimits. However, applications must not rely on these values, but
obtain the correct limits after the call to Camera::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently the pipeline handler advertises controls handled by the IPA from a
static ControlInfoMap defined in the raspberrypi.h header. This change removes
this header file, and instead the IPA returns the ControlInfoMap to the pipeline
handler from the ipa::init() function. This is done to allow the IPA to adjust
the limits of the controls based on the sensor mode in a subsequent change.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=83
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an optional sensor_temperature field to the DeviceStatus structure. If a
temperature measurement is available for a frame, the value is returned out
through the SensorTemperature control in the Request metadata.
Additionally, provide the sensor temperature value from the std::ostream &operator<<
overload.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
These changes retrieve the correct value for sensitivity of the mode
selected for the sensor. This value is known to the CamHelper which
passes it across to the pipeline handler so that it can be set
correctly in the camera properties.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The message that prints all controls in a request in
IPARPi::queueRequest() is noisy. Demote it from Info to Debug.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Simplify name-spacing of the RPi components by placing it in the
ipa::RPi namespace directly. It also aligns the RPi IPA with the other
ones (ipa::ipu3 and ipa::rkisp1) which already have this applied.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
