summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/data
AgeCommit message (Collapse)Author
2022-07-28ipa: raspberrypi: Convert existing cameara tuning files to version 2.0Naushir Patuck
Use the convert_tuning.py script to convert all existing tuning files to version 2.0. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Replace tabs with spaces in tuning data filesLaurent Pinchart
Tuning data files mostly use spaces for indentation, with occasional stray tabs. Use spaces consistently. This allows parsing the tuning files with libyaml, preparing to replace the dependency on boost. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-03-23ipa: raspberrypi: Add tuning file for IMX296 sensorNaushir Patuck
The Sony IMX296 exists in two versions, colour (Bayer) and monochrome. The tuning file corresponds to the monochrome version. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2022-02-03ipa: raspberrypi: config: Increase the max gain in the exposure profilesNaushir Patuck
Increase the maximum allowable gain from 6.0 to 8.0 in the normal and short exposure profiles for all camera sensors. Increase this limit to 12.0 for the long exposure profiles for sensors where this has been defined. The 6.0x value was somewhat arbitrarily chosen, and does limit the total exposure in dark conditions. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-11-02libcamera: ipa: raspberrypi: Add support for imx519 sensorArducam info
The necessary tuning file and CamHelper is added for the imx519 sensor. The imx519 is a 16MP rolling shutter sensor. To enable it, please add dtoverlay=imx519 to the /boot/config.txt file and reboot the Pi. Signed-off-by: Lee Jackson <info@arducam.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-14raspberrypi: ipa: Add tuning files for "NOIR" ov5647, imx219, imx477 modulesDavid Plowman
"NOIR" modules are ones that have had the IR filters removed but are otherwise identical. The same tuning can be used as for the regular version except that the colour calibration supplied to the AWB algorithm no longer works. Instead we need to switch the algorithm to its basic "grey world" method. Users with "NOIR" modules can switch to the matching "xxx_noir.json" tuning file by using the LIBCAMERA_RPI_TUNING_FILE environment variable. Signed-off-by: David Plowman <david.plowman@raspberypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-02ipa: raspberrypi: Add support for imx378 sensorDavid Plowman
This commit adds a tuning file for the 12MP imx378 sensor. The sensor actually shares the same driver (and CamHelper) as the imx477 so only a new tuning file is required. The default choice of imx477.json can be overridden by pointing LIBCAMERA_RPI_TUNING_FILE at a version of the new imx378.json file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28libcamera: ipa: raspberrypi: Add support for ov9281 sensorDavid Plowman
The necessary tuning file and CamHelper is added for the ov9281 sensor. The ov9281 is a 1280x800 monochrome global shutter sensor. To enable it, please add dtoverlay=ov9281 to the /boot/config.txt file and reboot the Pi. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11meson: Replace obselete join_paths() with '/' operatorUmang Jain
Since meson v0.49.0, join_paths() is equivalent to '/' hence, drop and replace it with '/' short-hand in meson files. This commit does not introduce any functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-14ipa: raspberrypi: Add support for imx327-based SE327M12 moduleDavid Plowman
This patch adds support for the Soho Enterprises SE327M12 module. The sensor is an imx327 which therefore uses the imx290 kernel driver and CamHelper. To use this module and camera tuning, place the following in the /boot/config.txt file: dtoverlay=imx290,clock-frequency=37125000 and then the existing imx290.json file must be over-written with se327m12.json Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Add support for imx290/imx327 sensorsDavid Plowman
imx290 and imx327 share the same kernel driver (imx290.c) and are therefore both recognised here as "imx290". We add the necessary CamHelper for these sensors, as well as a camera tuning file. The tuning was done with an Innomaker STARVIS IMX327LQR module. These have no IR cut filter so there is no proper colour tuning. However, you should obtain reasonable results for most modules using this sensor. Specific tunings for further modules can always be added subsequently. To use this sensor on the Raspberry Pi platform, please add dtoverlay=imx290,clock-frequency=74250000 into your /boot/config.txt file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-20ipa: raspberrypi: config: Update shutter speeds for imx219/477 and ov5647Naushir Patuck
Set the maximum shutter speed for the normal exposure profile to 66ms, allowing viewfinder framerates to go down to approx. 15fps. Set the maximum shutter speed for the sport exposure profile to 33ms, limiting the minimum framerate to approx. 30fps. Add a long exposure profile to allow shutter speeds of up to 120ms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: Fix initial AGC oscillation for imx219 sensorDavid Plowman
The exposure times in the exposure modes were causing AGC oscillations because the algorithm was demanding long unachievable exposure times but, without working sensor metadata, thought it was getting them when actually it was not. We fix it by making the exposure profile request only achievable exposure times, as we do for the ov5647 tuning. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-20src: ipa: raspberrypi: Change 'sport' exposure mode name to 'short'David Plowman
The names have to match for the setting to work. Use the libcamera terminology for consistency (even though it touches more files). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-03ipa: raspberrypi: Enable focus measure without recompileDavid Plowman
Previously, output of the focus measure could not be enabled without recompiling (because of the RPI_LOGGING_ENABLE macro). This uses the libcamera logging mechanism instead, so can be enabled/disabled at runtime. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25ipa: rpi: Add "focus" algorithmDavid Plowman
Adds FocusStatus to the image metadata, containing contrast measurements across the image. Optionally also prints a contrast measure to the console, to aid in manual adjustment of the lens. Note that it is not an actual auto-focus algorithm that can drive a lens! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09libcamera: Add missing SPDX headers to miscellaneous small filesLaurent Pinchart
Add missing SPDX headers to miscellaneous small files. Use CC0-1.0 for meson.build, .gitignore and the small include/linux/README, and licenses matching the corresponding component for other files. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-11libcamera: ipa: Raspberry Pi IPANaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and associated libraries. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>