| Age | Commit message (Collapse) | Author |
|---|
|
Generalise the contrast algorithm code by removing any hard-coded
assumptions about the target hardware platform. Instead, the algorithm
code creates a generic Pwl that gets returned to the IPA, where it gets
converted to the bcm2835 hardware specific lookup table.
As a drive-by, remove an unused mutex.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The algorithm uses the data type std::vector<std::array<double, 4>> to
represent the large sparse matrices that are XY (X, Y being the ALSC
grid size) high but with only 4 non-zero elements on each row.
Replace this slightly long type name by SparseArray<double>.
No functional changes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Array2D class is a very thin wrapper round std::vector that can be
used almost identically in the code, but it carries its 2D size with
it so that we aren't passing it around all the time.
All the std::vectors that were X * Y in size (X and Y being the ALSC
grid size) have been replaced. The sparse matrices that are XY * 4 in
size have not been as they are somewhat different, are used
differently, require more code changes, and actually make things more
confusing if everything looks like an Array2D but are not the same.
There should be no change in algorithm behaviour at all.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the ALSC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
The ALSC calculations use run-time allocated arrays/vectors on every
frame. Allocating these might add a non-trivial run-time penalty.
Replace these dynamic allocations with a set of reusable pre-allocated
vectors during the init phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new Controller::HardwareConfig structure that captures the
hardware statistics grid/histogram sizes and pipeline widths. This
ensures there is a single centralised places for these parameters.
Add a getHardwareConfig() helper function to retrieve these values for a
given hardware target.
Update the statistics populating routine in the IPA to use the values
from this structure instead of the hardcoded numbers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The target string may be used by algorithms to determine the running
hardware target.
Store the target string provided by the camera tuning files in the
controller state. Add a getTarget() member function to retrieve this
string.
Validate the correct hardware target ("bcm2835") during the IPA
initialisation phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make a copy of the CameraMode structure on a switch mode call. This
replaces the existing lastSensitivity_ field.
Limit the AGC gain calculations to the minimum value given by the
CameraMode structure. The maximum value remains unclipped as any gain
over the sensor maximum will be made up by digital gain.
Rename clipShutter to limitShutter for consistency, and have the latter
limit the shutter speed to both upper and lower bounds.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add fields in the CameraMode structure to capture the mode specific
limits for analogue gain and shutter speed. For convenience, also add
fields for minimum and maximum frame durations.
Populate these new fields when setting up the CameraMode structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When compiled with LTO (the default on Ubuntu), the global static
objects camHelpers and algorithms cause a crash in raspberrypi_ipa_proxy
at runtime as they're not allocated by the time the registration
routines execute.
This is a fairly crude fix which just converts the global static objects
into local static objects inside an equivalently named function.
Signed-off-by: Dave Jones <dave.jones@canonical.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The maxVal variable in the computeInitialY function needs to be a
uint64_t, otherwise the subsequent multiplications in the function
can overflow on relatively high resolution images (when the counts in
the regions go over 16 bits).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to
know this bit-depth when computing the Y value for the image.
Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all
region sums to 16-bits when filling the Statistics structure. AWB and ALSC are
agnostic about pipeline depth, so do not need changing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to
shared_ptr<RPiController::Statistics>. This removes any hardware specific header
files and structures from the algorithms source code.
Add a new function in the Raspberry Pi IPA to populate the generic statistics
structure from the values provided by the hardware in the bcm2835_isp_stats
structure.
Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the
generic statistics structure appropriately in their calculations. Additionally,
remove references to any hardware specific headers and defines in these source
files.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Release the statistics buffer after running the through the AWB calculations.
Only the "counted" statistics are copied out to a local structure, so keeping
the statistics buffer allows the algorithm to see the "uncounted" statistics as
well.
This is currently handled by hard-coding the total number of statistics regions
regions based on the structure definition in the bcm2835_isp_stats structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a default constructor to the RPiController::Histogram class that creates
an empty histogram. Since this is a cumulative histogram, push a value of 0 into
the first (and only) bin to signify this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
At present, the controller algorithms access the bcm2835_isp_stats structure,
which is hardware specific. It would be desirable to abstract out the statistics
structure to remove hardware specific headers from the algorithms source files.
Define a new templated RegionStats class that encompasses region based
statistics generated by the ISP. For the VC4 ISP, this can be used to hold
RGB sums and focus FoM values.
Define a new Statistics structure that holds all the VC4 ISP statistics output.
This includes AGC histograms, AGC/AWB region sums and focus FoM regions.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the current frame's lens position (in dioptres) to the DeviceStatus
structure. This value is obtained from the AfAlgorithm::getLensPosition()
member function. Return this lens position back to the pipeline handler to
store in the metadata field of the request.
As a drive-by, fixup some inaccurate comments in the DeviceStatus structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the first version of the Raspberry Pi autofocus algorithm. This
implementation uses a hybrid of contrast detect autofocus (CDAF) and phase
detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to
having less "hunting" behavior.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new AfAlgorithm class that defines the interface for the Raspberry Pi
autofocus algorithm.
Add an AfStatus structure that returns the results of the autofocus algorithm
back to the IPA.
Add a structure for PDAF statistics provided by supported sensors for use with
an autofocus algorithm. This structure is currently based on the IMX708's PDAF
"Type 1" statistics.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The digital gain calculation uses a total exposure value computed with the
current AGC state. However, this is wrong in the case of manual shutter/gain
controls, as the total exposure value used must be the value computed when the
AGC sent the manual shutter/gain controls to the pipeline handler to action.
To fix this, the IPA now adds the historical AgcStatus structure to the metadata
(tagged with "agc.delayed_status"). This historical AgcStatus structure contains
the total exposure value calculated when the AGC sent the manual shutter/gain
controls to the pipeline handler.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new member function to RPiController::Metadata that copies unique
key/value pairs from one object to the other. This is different from
std::map::merge that would remove the key/value pairs from the source object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
No existing Algorithm used the base pause(), resume() functions
or the paused_ flag, nor is there a need for a generic pause API.
Remove these. The AGC and AWB algorithms now have methods named
disableAuto(), enableAuto() which better describe their functionality.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previously we only did this when the system starts (on the first
switch_mode). Now we do it whenever the manual colour gains are
updated. To facilitate this, this R/B vs. colour temperature inverse
functions are stored persistently in the AwbConfig.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
pwl.cpp uses abs() instead of std::abs(), which causes unexpected
behavior in the Clang compiler used for Android. Replace with
C++-standard absolute value function std::abs(), which supports
double-precision absolute values in a standard way.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The raspberrypi IPA is missing thread-safety annotations, which breaks
the build.
Add required thread-safety annotations.
../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex
'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis]
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex
acquired here
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing
mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis]
void unlock() { mutex_.unlock(); }
^
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a lineLength field to the DeviceStatus structure to store the line
length used for a particular frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixel clock rate will be used in subsequent commits to calculate
line length durations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length duration to the
CameraMode structure. This replaces the existing lineLength field.
Any use of the existing lineLength field is replaced by the new
minLineLength field, as logically we always want to use the fastest
sensor readout by default.
As a drive-by cosmetic change, split all fields in the CameraMode
structure into separate lines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Building on gcc8 on Debian 10 fails with
asyncThread_ = std::thread(std::bind(&Awb::asyncFunc, this));
../src/ipa/raspberrypi/controller/rpi/awb.cpp:177:34: note: ‘std::bind’
is defined in header ‘<functional>’; did you forget to ‘#include
<functional>’?
Fix that by including <functional> in awb.cpp.
Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost")
Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/414
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The Pwl class uses std::function, defined in <functional>, without
including the header directly. This results in a compilation error with
the Fedora 36 compiler toolchain (gcc 12.1.1):
In file included from ../src/ipa/raspberrypi/controller/rpi/awb.h:14,
from ../src/ipa/raspberrypi/controller/rpi/awb.cpp:14:
../src/ipa/raspberrypi/controller/rpi/../pwl.h:97:18: error: 'std::function' has not been declared
97 | void map(std::function<void(double x, double y)> f) const;
| ^~~
Fix it by including <functional>.
Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost")
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Controller(char const *jsonFilename) is not valid anymore since
Controller::read() can now return an error on a failure. Additionally, this
constructor is not actually used, so remove it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace the manual implementation of the readList() functions with
YamlObject::getList().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The existing tuning file format (version 1.0) requires the controller algorithms
to run in the same order as listed in the JSON structure. The JSON specification
does not mandate any such ordering, but the Boost JSON parser would maintain
this order.
In order to remove this reliance on the parser to provide ordering, introduce a
new version 2.0 format for the camera tuning file. In this version, the
algorithms are specified in a top level list node ("algorithms"), which does
require strict ordering of the elements.
A "version" node is added to distinguish between the version 1.0 and 2.0
formats. The absence of the "version" node implies version 1.0.
A "target" node is also added to specify the target platform for this
configuration.
Update the controller to support either version of the tuning file by looking
at the version node. CreateAlgorithm member function to now load and configure
each algorithm. Additionally, make CreateAlgorithm a private member, it does not
get called externally.
If a version 1.0 format tuning file is used, throw a warning message indicating
it will be soon deprecated.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Raspberry Pi IPA module depends on boost only to parse the JSON
tuning data files. As libcamera depends on libyaml, use the YamlParser
class to parse those files and drop the dependency on boost.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Replace the Fatal log messages that cause an abort during tuning data
read with Error messages and proper error propagation to the caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Update the AGC metering functions that deal with reading tuning data to
propagate errors to the caller, using std::tie and std::tuple to group
the error code and return value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
When encountering errors, the Algorithm::read() function either uses
LOG(Fatal) or throws exceptions from the boost property_tree functions.
To prepare for replacing boost JSON parse with the YamlParser class,
give the Algorithm::read() function the ability to return an error code,
and propagate it all the way to the IPA module init() function.
All algorithm classes return a hardcoded 0 value for now, subsequent
commits will change that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Remove "Agc:" as that gets prefixed by the logging system.
s/AgcConfig/AgcMeteringMode/ and s/AgcConfig/AgcMeteringMode where appropriate.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all #define constant values with equivalent constexpr definitions.
As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all exception throw statements with LOG(RPi*, Fatal) error messages.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new
Raspberry Pi entity name.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As per the libcamera coding guidelines, rename all .hpp header files to .h.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since the controller header files are now C++ specific, remove the extern "C"
declarations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As part of the on-going refactor efforts for the source files in
src/ipa/raspberrypi/, switch all C++ style comments to C style comments.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended
formatting guidelines for the libcamera project. The vast majority of changes
in this commit comprise of switching from snake_case to CamelCase, and starting
class member functions with a lower case character.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the aperture, lens_position, and flash_intensity fields in the
DeviceStatus structure to use std::optional instead of using invalid default
values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an optional sensor_temperature field to the DeviceStatus structure. If a
temperature measurement is available for a frame, the value is returned out
through the SensorTemperature control in the Request metadata.
Additionally, provide the sensor temperature value from the std::ostream &operator<<
overload.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Under the right circumstances, the alsc calculations could spread the colour
errors across the entire image as lambda remains unbound. This would cause the
corrected image chroma values to slowly drift to incorrect values.
This change adds a config parameter (alsc.lambda_bound) that provides an upper
and lower bound to the lambda value at every stage of the calculation. With this
change, we now adjust the lambda values so that the average across the entire
grid is 1 instead of normalising to the minimum value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We now handle disabling ("pausing") AWB in the same way as
AEC/AGC. Instead of letting the pause flag be set so that the code
never runs at all, we instead fix the manual settings to the current
values (but continue to be called).
The algorithm does not restart any calculations in this state, but
continues to add AWB metadata to every frame. Therefore certain other
algorithms that want to know it (CCM and ALSC, for example) can still
find it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
"using namespace" in a header file propagates the namespace to
the files including the header file. So it should be avoided.
This removes "using namespace" in agc.hpp.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The bcm2835-isp.h is included with quotes rather than
angle brackets.
Quoted includes is reserved for internal includes, while the
linux/bcm2835-isp.h header is exported from the Linux kernel.
Fix the inclusion type.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
