summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/controller/rpi
AgeCommit message (Collapse)Author
2023-03-31ipa: raspberrypi: Generalise the ALSC algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the ALSC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. The ALSC calculations use run-time allocated arrays/vectors on every frame. Allocating these might add a non-trivial run-time penalty. Replace these dynamic allocations with a set of reusable pre-allocated vectors during the init phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Ensure shutter speed and gain are clipped in the AGCNaushir Patuck
Make a copy of the CameraMode structure on a switch mode call. This replaces the existing lastSensitivity_ field. Limit the AGC gain calculations to the minimum value given by the CameraMode structure. The maximum value remains unclipped as any gain over the sensor maximum will be made up by digital gain. Rename clipShutter to limitShutter for consistency, and have the latter limit the shutter speed to both upper and lower bounds. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: agc: Fix overflow in Y value calculationDavid Plowman
The maxVal variable in the computeInitialY function needs to be a uint64_t, otherwise the subsequent multiplications in the function can overflow on relatively high resolution images (when the counts in the regions go over 16 bits). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Normalise region sums to 16-bitsNaushir Patuck
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to know this bit-depth when computing the Y value for the image. Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all region sums to 16-bits when filling the Statistics structure. AWB and ALSC are agnostic about pipeline depth, so do not need changing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Use the generic statistics structure in the algorithmsNaushir Patuck
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to shared_ptr<RPiController::Statistics>. This removes any hardware specific header files and structures from the algorithms source code. Add a new function in the Raspberry Pi IPA to populate the generic statistics structure from the values provided by the hardware in the bcm2835_isp_stats structure. Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the generic statistics structure appropriately in their calculations. Additionally, remove references to any hardware specific headers and defines in these source files. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: awb: Delay release of the statistics bufferNaushir Patuck
Release the statistics buffer after running the through the AWB calculations. Only the "counted" statistics are copied out to a local structure, so keeping the statistics buffer allows the algorithm to see the "uncounted" statistics as well. This is currently handled by hard-coding the total number of statistics regions regions based on the structure definition in the bcm2835_isp_stats structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: First version of autofocus algorithm using PDAFNick Hollinghurst
Provide the first version of the Raspberry Pi autofocus algorithm. This implementation uses a hybrid of contrast detect autofocus (CDAF) and phase detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to having less "hunting" behavior. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-21ipa: raspberrypi: Remove generic "pause" mechanism from AlgorithmNick Hollinghurst
No existing Algorithm used the base pause(), resume() functions or the paused_ flag, nor is there a need for a generic pause API. Remove these. The AGC and AWB algorithms now have methods named disableAuto(), enableAuto() which better describe their functionality. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-28ipa: raspberrypi: awb: Update colour temperature whenever manual gains changeDavid Plowman
Previously we only did this when the system starts (on the first switch_mode). Now we do it whenever the manual colour gains are updated. To facilitate this, this R/B vs. colour temperature inverse functions are stored persistently in the AwbConfig. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-29ipa: raspberry: awb: Include <functional>Jacopo Mondi
Building on gcc8 on Debian 10 fails with asyncThread_ = std::thread(std::bind(&Awb::asyncFunc, this)); ../src/ipa/raspberrypi/controller/rpi/awb.cpp:177:34: note: ‘std::bind’ is defined in header ‘<functional>’; did you forget to ‘#include <functional>’? Fix that by including <functional> in awb.cpp. Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost") Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/414 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-28ipa: raspberrypi: agc: Use YamlObject::getList()Laurent Pinchart
Replace the manual implementation of the readList() functions with YamlObject::getList(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Use YamlParser to replace dependency on boostLaurent Pinchart
The Raspberry Pi IPA module depends on boost only to parse the JSON tuning data files. As libcamera depends on libyaml, use the YamlParser class to parse those files and drop the dependency on boost. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Replace Fatal log by error propagationLaurent Pinchart
Replace the Fatal log messages that cause an abort during tuning data read with Error messages and proper error propagation to the caller. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Propagate errors from AGC metering tuning data readLaurent Pinchart
Update the AGC metering functions that deal with reading tuning data to propagate errors to the caller, using std::tie and std::tuple to group the error code and return value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Return an error code from Algorithm::read()Laurent Pinchart
When encountering errors, the Algorithm::read() function either uses LOG(Fatal) or throws exceptions from the boost property_tree functions. To prepare for replacing boost JSON parse with the YamlParser class, give the Algorithm::read() function the ability to return an error code, and propagate it all the way to the IPA module init() function. All algorithm classes return a hardcoded 0 value for now, subsequent commits will change that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-27ipa: raspberrypi: agc: Fix log message prefixesNaushir Patuck
Remove "Agc:" as that gets prefixed by the logging system. s/AgcConfig/AgcMeteringMode/ and s/AgcConfig/AgcMeteringMode where appropriate. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Remove #define constantsNaushir Patuck
Replace all #define constant values with equivalent constexpr definitions. As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberryip: Remove all exception throw statementsNaushir Patuck
Replace all exception throw statements with LOG(RPi*, Fatal) error messages. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27raspberrypi: Update Copyright statement in all Raspberry Pi source filesNaushir Patuck
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new Raspberry Pi entity name. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Rename header files from *.hpp to *.hNaushir Patuck
As per the libcamera coding guidelines, rename all .hpp header files to .h. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Change to C style code commentsNaushir Patuck
As part of the on-going refactor efforts for the source files in src/ipa/raspberrypi/, switch all C++ style comments to C style comments. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Code refactoring to match style guidelinesNaushir Patuck
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended formatting guidelines for the libcamera project. The vast majority of changes in this commit comprise of switching from snake_case to CamelCase, and starting class member functions with a lower case character. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: raspberrypi: Use std::optional in DeviceStatusNaushir Patuck
Switch the aperture, lens_position, and flash_intensity fields in the DeviceStatus structure to use std::optional instead of using invalid default values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-06ipa: raspberrypi: alsc: Limit the calculated lambda valuesNaushir Patuck
Under the right circumstances, the alsc calculations could spread the colour errors across the entire image as lambda remains unbound. This would cause the corrected image chroma values to slowly drift to incorrect values. This change adds a config parameter (alsc.lambda_bound) that provides an upper and lower bound to the lambda value at every stage of the calculation. With this change, we now adjust the lambda values so that the average across the entire grid is 1 instead of normalising to the minimum value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-08ipa: raspberrypi: awb: Better handling of how we disable AWBDavid Plowman
We now handle disabling ("pausing") AWB in the same way as AEC/AGC. Instead of letting the pause flag be set so that the code never runs at all, we instead fix the manual settings to the current values (but continue to be called). The algorithm does not restart any calculations in this state, but continues to add AWB metadata to every frame. Therefore certain other algorithms that want to know it (CCM and ALSC, for example) can still find it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-15ipa: raspberrypi: agc: Remove using namespace in agc.hppHirokazu Honda
"using namespace" in a header file propagates the namespace to the files including the header file. So it should be avoided. This removes "using namespace" in agc.hpp. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-17ipa: raspberrypi: Fix bcm2835-isp inclusion type.Kieran Bingham
The bcm2835-isp.h is included with quotes rather than angle brackets. Quoted includes is reserved for internal includes, while the linux/bcm2835-isp.h header is exported from the Linux kernel. Fix the inclusion type. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-09libcamera: Rename 'method' to 'function'Laurent Pinchart
Usage of 'method' to refer to member functions comes from Java. The C++ standard uses the term 'function' only. Replace 'method' with 'function' or 'member function' through the whole code base and documentation. While at it, fix two typos (s/backeng/backend/). The BoundMethod and Object::invokeMethod() are left as-is here, and will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05ipa: raspberrypi: AGC: handle modes with different sensitivitiesDavid Plowman
When the sensor is switched to a mode with a different sensitivity, the target exposure values need to be adjusted proportionately to maintain the same image brightness. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add a constructor struct DeviceStatusNaushir Patuck
The constructor sets all fields to 0. This replaces the memset(0) and default value initialisation usage in the agc and lux controllers respectively. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28libcamera: ipa: raspberrypi: Demote warnings about lack of AWB resultsDavid Plowman
Warnings about the lack of AWB status results are demoted to being just "Debug". With monochrome sensors becoming more common this would otherwise overwhelm the console output, and in practice nothing is really lost as it is normally very evident if AWB is failing to run. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-25libcamera/base: Move extended base functionalityKieran Bingham
Move the functionality for the following components to the new base support library: - BoundMethod - EventDispatcher - EventDispatcherPoll - Log - Message - Object - Signal - Semaphore - Thread - Timer While it would be preferable to see these split to move one component per commit, these components are all interdependent upon each other, which leaves us with one big change performing the move for all of them. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move utils to the base libraryKieran Bingham
Move the utils functionality to the libcamera/base library. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch the AGC/Lux code to use utils::DurationNaushir Patuck
Convert the core AGC and Lux controller code to use utils::Duration for all exposure time related variables and calculations. Convert the exposure/shutter time fields in AgcStatus and DeviceStatus to use utils::Duration. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch AgcAlgorithm API to use utils::DurationNaushir Patuck
Switch the AgcAlgorithm API functions to use utils::Duration for all time based variables. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Ignore invalid statistics zones correctlyDavid Plowman
Regions of the image where the statistics are not trusted should not be put in the zones_ list. This also means that the AWB may fail to run initially, so async_results_ needs to be initialised to some kind of default. Finally, the RGB zone structures can be zero-initialised safely now, the previous value of -1 would seem unusual. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Remove unused codeDavid Plowman
Some more code from pre-libcamera versions is removed. There is no functional change. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-11ipa: raspberrypi: AWB: Fix race condition setting manual gainsDavid Plowman
Applying the manual_r_ and manual_b_ values is entirely removed from the asynchronous thread where their use constituted a race hazard. The main thread now deals with them entirely, involving the following changes. 1. SetManualGains() applies the new values directly to the "sync_results", meaning that Prepare() will jump to the new values immediately (which is a better behaviour). 2. Process() does not restart the asynchronous thread when manual gains are in force. 3. The asynchronous thread might be running when manual gains are set, so we ignore the results produced in this case. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-10ipa: raspberrypi: AWB: Remove unecessary frame count variableDavid Plowman
The variable frame_count2_ is not needed as Prepare() and Process() always run in lock step one after the other. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-09ipa: raspberrypi: Add a DenoiseAlgorithm class to the ControllerNaushir Patuck
This denoise algorithm class will be used to pass in the user requested denoise operating mode to the controller. The existing Denoise controller will derive from this new DenoiseAlgorithm class. Add a denoise mode field in the denoise status metadata object for the IPA to use when configuring the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-09ipa: raspberrypi: Rename SdnStatus to DenoiseStatusNaushir Patuck
This change is in anticipation of the addition of a DenoiseAlgorithm base class which the SDN class will derive from. We want to match the metadata object name with the base class algorithm name. This renames: - SdnStatus metadata object to DenoiseStatus - "sdn.status" metadata string key to "denoise.status" - sdn_status.h header file to denoise_status.h Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: lux: Supply missing method and remove atomic variableDavid Plowman
Supply the missing SetCurrentAperture() method (even though no one is calling it). If we did call it, it would be called synchronously so the atomic variable is not required. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: noise: Remove unnecessary atomic variableDavid Plowman
mode_factor_ does not need to be atomic - it is set by SwitchMode() which runs synchronously. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: rasberrypi: contrast: Remove unnecessary atomic variablesDavid Plowman
SetBrightness() and SetContrast() are only called synchronously so there is no need for brightness_ and contrast_ to be atomic. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: ccm: Remove unnecessary atomic variableDavid Plowman
SetSaturation() gets called synchronously so there is no need for saturation_ to be atomic. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: AWB: Improve lockingDavid Plowman
Fix a couple of places where notify_one() was called with the lock held. Also restartAsync doesn't need the lock for its entire duration. This change exactly matches commit db552b0b925a ("libcamera: ipa: raspberrypi: ALSC: Improve locking in a few places") where we do the same for ALSC (the asynchronous thread arrangement there is identical). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: AWB: Remove unnecessary locking for AWB settingsDavid Plowman
AWB settings get updated synchronously with the main thread, so the settings_mutex_ and associated locking can be removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-05ipa: raspberrypi: Pass the maximum allowable shutter speed into the AGCNaushir Patuck
In order to provide an optimal split between shutter speed and gain, the AGC must know the maximum allowable shutter speed, as limited by the maximum frame duration (either application provided or the default). Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The IPA provides the maximum shutter speed for AGC calculations. This applies to both the manual and auto AGC modes. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-02ipa: raspberrypi: alsc: Fix copy-paste error in debug statementDavid Plowman
Reported-by: Coverity CID=309689 Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>