| Age | Commit message (Collapse) | Author |
|---|
|
The Array2D class is a very thin wrapper round std::vector that can be
used almost identically in the code, but it carries its 2D size with
it so that we aren't passing it around all the time.
All the std::vectors that were X * Y in size (X and Y being the ALSC
grid size) have been replaced. The sparse matrices that are XY * 4 in
size have not been as they are somewhat different, are used
differently, require more code changes, and actually make things more
confusing if everything looks like an Array2D but are not the same.
There should be no change in algorithm behaviour at all.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove any hard-coded assumptions about the target hardware platform
from the ALSC algorithm. Instead, use the "target" string provided by
the camera tuning config and generalised statistics structures to
determing parameters such as grid and region sizes.
The ALSC calculations use run-time allocated arrays/vectors on every
frame. Allocating these might add a non-trivial run-time penalty.
Replace these dynamic allocations with a set of reusable pre-allocated
vectors during the init phase.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make a copy of the CameraMode structure on a switch mode call. This
replaces the existing lastSensitivity_ field.
Limit the AGC gain calculations to the minimum value given by the
CameraMode structure. The maximum value remains unclipped as any gain
over the sensor maximum will be made up by digital gain.
Rename clipShutter to limitShutter for consistency, and have the latter
limit the shutter speed to both upper and lower bounds.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The maxVal variable in the computeInitialY function needs to be a
uint64_t, otherwise the subsequent multiplications in the function
can overflow on relatively high resolution images (when the counts in
the regions go over 16 bits).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to
know this bit-depth when computing the Y value for the image.
Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all
region sums to 16-bits when filling the Statistics structure. AWB and ALSC are
agnostic about pipeline depth, so do not need changing.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to
shared_ptr<RPiController::Statistics>. This removes any hardware specific header
files and structures from the algorithms source code.
Add a new function in the Raspberry Pi IPA to populate the generic statistics
structure from the values provided by the hardware in the bcm2835_isp_stats
structure.
Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the
generic statistics structure appropriately in their calculations. Additionally,
remove references to any hardware specific headers and defines in these source
files.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Release the statistics buffer after running the through the AWB calculations.
Only the "counted" statistics are copied out to a local structure, so keeping
the statistics buffer allows the algorithm to see the "uncounted" statistics as
well.
This is currently handled by hard-coding the total number of statistics regions
regions based on the structure definition in the bcm2835_isp_stats structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the first version of the Raspberry Pi autofocus algorithm. This
implementation uses a hybrid of contrast detect autofocus (CDAF) and phase
detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to
having less "hunting" behavior.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The digital gain calculation uses a total exposure value computed with the
current AGC state. However, this is wrong in the case of manual shutter/gain
controls, as the total exposure value used must be the value computed when the
AGC sent the manual shutter/gain controls to the pipeline handler to action.
To fix this, the IPA now adds the historical AgcStatus structure to the metadata
(tagged with "agc.delayed_status"). This historical AgcStatus structure contains
the total exposure value calculated when the AGC sent the manual shutter/gain
controls to the pipeline handler.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
No existing Algorithm used the base pause(), resume() functions
or the paused_ flag, nor is there a need for a generic pause API.
Remove these. The AGC and AWB algorithms now have methods named
disableAuto(), enableAuto() which better describe their functionality.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previously we only did this when the system starts (on the first
switch_mode). Now we do it whenever the manual colour gains are
updated. To facilitate this, this R/B vs. colour temperature inverse
functions are stored persistently in the AwbConfig.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Building on gcc8 on Debian 10 fails with
asyncThread_ = std::thread(std::bind(&Awb::asyncFunc, this));
../src/ipa/raspberrypi/controller/rpi/awb.cpp:177:34: note: ‘std::bind’
is defined in header ‘<functional>’; did you forget to ‘#include
<functional>’?
Fix that by including <functional> in awb.cpp.
Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost")
Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/414
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Replace the manual implementation of the readList() functions with
YamlObject::getList().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The Raspberry Pi IPA module depends on boost only to parse the JSON
tuning data files. As libcamera depends on libyaml, use the YamlParser
class to parse those files and drop the dependency on boost.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Replace the Fatal log messages that cause an abort during tuning data
read with Error messages and proper error propagation to the caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Update the AGC metering functions that deal with reading tuning data to
propagate errors to the caller, using std::tie and std::tuple to group
the error code and return value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
When encountering errors, the Algorithm::read() function either uses
LOG(Fatal) or throws exceptions from the boost property_tree functions.
To prepare for replacing boost JSON parse with the YamlParser class,
give the Algorithm::read() function the ability to return an error code,
and propagate it all the way to the IPA module init() function.
All algorithm classes return a hardcoded 0 value for now, subsequent
commits will change that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Remove "Agc:" as that gets prefixed by the logging system.
s/AgcConfig/AgcMeteringMode/ and s/AgcConfig/AgcMeteringMode where appropriate.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all #define constant values with equivalent constexpr definitions.
As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all exception throw statements with LOG(RPi*, Fatal) error messages.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new
Raspberry Pi entity name.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As per the libcamera coding guidelines, rename all .hpp header files to .h.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As part of the on-going refactor efforts for the source files in
src/ipa/raspberrypi/, switch all C++ style comments to C style comments.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended
formatting guidelines for the libcamera project. The vast majority of changes
in this commit comprise of switching from snake_case to CamelCase, and starting
class member functions with a lower case character.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the aperture, lens_position, and flash_intensity fields in the
DeviceStatus structure to use std::optional instead of using invalid default
values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Under the right circumstances, the alsc calculations could spread the colour
errors across the entire image as lambda remains unbound. This would cause the
corrected image chroma values to slowly drift to incorrect values.
This change adds a config parameter (alsc.lambda_bound) that provides an upper
and lower bound to the lambda value at every stage of the calculation. With this
change, we now adjust the lambda values so that the average across the entire
grid is 1 instead of normalising to the minimum value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We now handle disabling ("pausing") AWB in the same way as
AEC/AGC. Instead of letting the pause flag be set so that the code
never runs at all, we instead fix the manual settings to the current
values (but continue to be called).
The algorithm does not restart any calculations in this state, but
continues to add AWB metadata to every frame. Therefore certain other
algorithms that want to know it (CCM and ALSC, for example) can still
find it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
"using namespace" in a header file propagates the namespace to
the files including the header file. So it should be avoided.
This removes "using namespace" in agc.hpp.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The bcm2835-isp.h is included with quotes rather than
angle brackets.
Quoted includes is reserved for internal includes, while the
linux/bcm2835-isp.h header is exported from the Linux kernel.
Fix the inclusion type.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the sensor is switched to a mode with a different sensitivity,
the target exposure values need to be adjusted proportionately to
maintain the same image brightness.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The constructor sets all fields to 0. This replaces the memset(0) and default
value initialisation usage in the agc and lux controllers respectively.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Warnings about the lack of AWB status results are demoted to being
just "Debug". With monochrome sensors becoming more common this would
otherwise overwhelm the console output, and in practice nothing is
really lost as it is normally very evident if AWB is failing to run.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the utils functionality to the libcamera/base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Convert the core AGC and Lux controller code to use
utils::Duration for all exposure time related variables and
calculations.
Convert the exposure/shutter time fields in AgcStatus and DeviceStatus
to use utils::Duration.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the AgcAlgorithm API functions to use utils::Duration for all
time based variables.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Regions of the image where the statistics are not trusted should not
be put in the zones_ list.
This also means that the AWB may fail to run initially, so
async_results_ needs to be initialised to some kind of default.
Finally, the RGB zone structures can be zero-initialised safely now,
the previous value of -1 would seem unusual.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some more code from pre-libcamera versions is removed. There is no
functional change.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Applying the manual_r_ and manual_b_ values is entirely removed from
the asynchronous thread where their use constituted a race hazard. The
main thread now deals with them entirely, involving the following
changes.
1. SetManualGains() applies the new values directly to the
"sync_results", meaning that Prepare() will jump to the new values
immediately (which is a better behaviour).
2. Process() does not restart the asynchronous thread when manual
gains are in force.
3. The asynchronous thread might be running when manual gains are set,
so we ignore the results produced in this case.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The variable frame_count2_ is not needed as Prepare() and Process()
always run in lock step one after the other.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This denoise algorithm class will be used to pass in the user requested
denoise operating mode to the controller. The existing Denoise
controller will derive from this new DenoiseAlgorithm class.
Add a denoise mode field in the denoise status metadata object for the
IPA to use when configuring the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change is in anticipation of the addition of a DenoiseAlgorithm
base class which the SDN class will derive from. We want to match the
metadata object name with the base class algorithm name.
This renames:
- SdnStatus metadata object to DenoiseStatus
- "sdn.status" metadata string key to "denoise.status"
- sdn_status.h header file to denoise_status.h
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Supply the missing SetCurrentAperture() method (even though no one is
calling it). If we did call it, it would be called synchronously so
the atomic variable is not required.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
mode_factor_ does not need to be atomic - it is set by SwitchMode()
which runs synchronously.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
SetBrightness() and SetContrast() are only called synchronously so
there is no need for brightness_ and contrast_ to be atomic.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
SetSaturation() gets called synchronously so there is no need for
saturation_ to be atomic.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a couple of places where notify_one() was called with the lock
held. Also restartAsync doesn't need the lock for its entire duration.
This change exactly matches commit db552b0b925a ("libcamera: ipa:
raspberrypi: ALSC: Improve locking in a few places") where we do the
same for ALSC (the asynchronous thread arrangement there is identical).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
AWB settings get updated synchronously with the main thread, so the
settings_mutex_ and associated locking can be removed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to provide an optimal split between shutter speed and gain, the
AGC must know the maximum allowable shutter speed, as limited by the
maximum frame duration (either application provided or the default).
Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The
IPA provides the maximum shutter speed for AGC calculations. This
applies to both the manual and auto AGC modes.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
