| Age | Commit message (Collapse) | Author |
|---|
|
Add a validation check for sensor controls validateSensorControls()
before they are queried in IPAIPU3::updateSessionConfiguration().
Fail the IPAIPU3::configure() if the required sensor controls are
not found.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Drop exposure, gain private members from IPAIPU3 because the values
are handled directly via IPAFrameContext.
Move the default vblank value from IPAIPU3 to IPASessionConfiguration
structure as it is a default static value not expected to change
for a session.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The exposure and gain limits are required for AGC configuration
handled in IPAIPU3::updateSessionConfiguration(), which is happening
already. Therefore the max/min private members in IPAIPU3 class for
exposure/gain serve no use except setting initial values of exposure_
and gain_ members.
Drop the max/min private members from IPAIPU3 class and set initial
gain_ and exposure_ in IPAIPU3::updateSessionConfiguration().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Pick up the focus value from the AF algorithm and send lens controls
along in the frame context.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have added lens controls, rename the existiing
member of the class to clarify that it relates to the sensor's
controls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add further members to the ipu3 ipa interface that will hold lens
controls passed in by configInfo
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Since VCM for surface Go 2 (dw9719) had been successfully driven, this
Af module can be used to control the VCM and determine the focus value
based on the IPU3 AF state.
Based on the values from the IPU3 AF buffer, the variance of each focus
step is determined and a greedy approach is used to find the maximum
variance of the AF state and an appropriate focus value.
The grid configuration is implemented as a context. Also, the grid
parameter- AF_MIN_BLOCK_WIDTH is set to 4 (default is 3) since if the
default value is used, x_start (x_start > 640) will be at an incorrect
location of the image (rightmost of the sensor).
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of having a local cached value for line duration, store it in
the IPASessionConfiguration::sensor structure.
While at it, configure the default analogue gain and shutter speed to
controlled fixed values.
The latter is set to be 10ms as it will in most cases be close to the
one needed, making the AGC faster to converge.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When the effective sensor values are stored during the EventStatReady
event, the lines are long. Fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Use the new utils::abs_diff() function where appropriate to replace
manual implementations.
While at it fix a header ordering issue in
src/libcamera/pipeline/raspberrypi/raspberrypi.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Report value of sensor's gain pertaining to the current request
completion, as that is the gain value the request completed with.
The Agc algorithm processes the gain value for incoming next request
hence it should not be reported in request's metadata.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The driver is responsible for setting the proper limits for its
controls.
The IMX219 has an analogue gain of 1.0 when the gain code is set to 0,
therefore we can not clamp to a minimum gain code of 1.
Rework this for both IPU3 and RkISP1, for both Exposure and Gain
controls.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can report the controls::AnalogueGain metadata now that AGC is
updating it correctly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the exposure time calculated, report it in the
controls::ExposureTime and don't use the pipeline handler for it
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We use the line duration several times in the IPAIPU3. Instead of
recalculating it each time, cache the value as a utils::Duration.
ExposureTime and FrameDuration units are in micro-seconds, cast the
Duration accordingly.
As sensorInfo is no longer used in updateSessionConfiguration remove the
reference to it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that the color temperature is updated per-frame, use the value and
set the corresponding controls::ColourTemperature.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pipeline handler populates the new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Make those values the frameContext::sensor values for the frame when the
EventStatReady event is received.
AGC also needs to use frameContext.sensor as its input values and
frameContext.agc as its output values. Modify computeExposure by passing
it the frameContext instead of individual exposure and gain values.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
IPU3Event and IPU3Action use single ControlList for both libcamera and
V4L2 controls, and it's content could be either one based on the
context. Extend IPU3Event and IPU3Action for sensor V4L2 controls, and
preserve the original one for only libcamera Controls to make the
content of an event more specific.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
[Jean-Michel: remove lensControls from the original patch]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPU3 IPA has three events which are handled from the pipeline
handler.
The events are received in the sequence, EventProcessControls,
EventFillParams, and finally EventStatReady, while the code lists these
in a different order.
Update the flow of IPAIPU3::processEvent() to match the expected
sequence of events, to help support the reader in interpreting the flow
of events through the IPA.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
While the stop() function does not currently perform any action, it forms
part of the IPA interface and is a public function in the class.
Promote it to a full (but basic) function implementation and begin the
documentation accordingly so that there is an appropriate stub to
perform stop operations if they come up.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The IPU3 IPA core is growing with additional documentation. The
ipa_context documentation is stored here, but it pushes the IPU3
documentation and implementation further from the head of the file.
Furthermore, the ipa_context documentation is outside of the ipa::ipu3
namespace and isn't identified correctly by Doxygen.
Move the ipa_context to its own compilation object even though there
isn't any code, but to maintain consistency with our documentation
model.
Correctly re-introduce the documentation into the libcamera::ipa::ipu3
namespace during the move.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The tone mapping algorithm calculates the gamma curve for every frame,
regardless of whether the gamma value has changed or not. This issue is
exasperated as we currently hardcode the gamma to a single value.
Optimise the implementation to only recalculate the look up table when
the gamma setting is changed, and store the gamma setting of the LUT
curve as part of the IPA context.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The stats pointer is marked as [[maybe_unused]]. This is a leftover from
a previous commit which was here to keep the compatibility while
transitioning to the new iterative algorithms.
Remove this attribute to make it explicit that stats are really used to
feed the algorithms.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Clarify the roles and interactions between the pipeline handler events
and the algorithm calls by documenting all the remaining functions of
the class.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Further extend the documentation for the IPAIPU3::configure operation.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The IPU3 IPA is maturing to a modular and extensible system capable of
handling specific algorithms for the processing blocks on the ImgU.
Provide a top-level class documentation to provide an overview of the
IPA, detailing what events are used and what algorithms are currently
supported, as well as the limitations currently imposed.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The AGC frame context needs to be initialised correctly for the first
iteration. Until now, the IPA uses the minimum exposure and gain values
and caches those in local variables.
In order to give the sensor limits to AGC, create a new structure in
IPASessionConfiguration. Store the exposure in time (and not line
duration) and the analogue gain after CameraSensorHelper conversion.
Set the gain and exposure appropriately to the current values known to
the IPA and remove the setting of exposure and gain in IPAIPU3 as those
are now fully controlled by IPU3Agc.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When a new CameraConfiguration is applied to the Camera the IPA is
configured as well, using the newly applied sensor configuration and its
updated V4L2 controls.
Also update the Camera controls at IPA::configure() time by re-computing
the controls::ExposureTime and controls::FrameDurationLimits limits and
update the controls on the pipeline handler side after having configured
the IPA.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixels output by the camera normally include a black level, because
sensors do not always report a signal level of '0' for black. Pixels at
or below this level should be considered black and to achieve that, we
need to substract an offset to all the pixels. This can be taken into
account by reading the lowest value of a special region on sensors which
is not exposed to light. This provides a substracting factor to be
able to adjust the expected black levels in the resulting images.
For a camera outputting 10-bit pixel values (in the range 0 to 1023) a
typical black level might be 64. It is a fixed value, obtained by
capturing a raw frame with minimum exposure and gain fixed to 1.0 while
covering the sensor (the darker the better). We consider it good enough
as a very first approximation, until we measure it during a tuning
process and include it in a configuration file
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The statistics buffer 'ipu3_uapi_awb_raw_buffer' stores the ImgU
calculation results in a buffer aligned horizontally to a multiple of 4
cells. The AWB loop should take care of it to add the proper offset
between lines and avoid any staircase effect.
It is no longer required to pass the grid configuration context to the
private functions called from process() which simplifies the code flow.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The loops over the width and height of the image when calculating the
BDS grid parameters are nested, but they're actually independent. Split
them to reduce the complexity.
While at it, split out the constants to documented const expressions
for the grid sizes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Until now, the limits used to calculate the grid based on the Bayer Down
Scaler configuration where taken from the kernel documentation [0].
While testing and understanding the format of the ImgU statistics, it
appears that the ones defined in CrOS [1] are the correct ones. Use
those.
[0] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/pixfmt-meta-intel-ipu3.html?highlight=v4l2_meta_fmt_ipu3_params#intel-ipu3-imgu-uapi-data-types
[1] https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/refs/heads/master/hal/intel/include/ia_imaging/awb_public.h
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA::configure() function has an IPAConfigInfo parameters which
contains a map of numerical indexes to ControlInfoMap instances.
This is a leftover of the old IPA protocol, where it was not possible to
specify a rich interface as it is possible today and each entity
ControlInfoMap was indexed by a numerical id and stored in a map.
Now that the IPA interface allows to specify parameters by name, drop the
map and send the sensor's control info map only.
If we'll need more ControlInfoMap to be shared with the IPA, a new parameter
can be added to IPAConfigInfo.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The incoming params buffer may contain uninitialised data, or the
parameters of previously queued frames. Clearing the entire buffer
may be an expensive operation, and the kernel will only read from
structures which have their associated use-flag set.
It is the responsibility of the algorithms to set the use flags
accordingly for any data structure they update during prepare().
Clear the use flags of the parameter buffer before passing the buffer
to the algorithms during their prepare() operations.
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
MappedFrameBuffer::maps() returns planes_. This renames the function
name to planes().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the interface is properly used by the AGC class, move it into
ipa::ipu3::algorithms and let the loops do the calls.
As we need to exchange the exposure_ and gain_ by passing them through the
FrameContext, use the calculated values in setControls() function to
ease the reading.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the interface is properly used by the AWB class, move it into
ipa::ipu3::algorithms and let the loops do the calls.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for using the AGC through the new algorithm interfaces,
convert the existing code to use the new function types.
Now that the process call is rewritten, re-enable the compiler flag to
warn when a function declaration hides virtual functions from a base class
(-Woverloaded-virtual).
We never use converged_ so remove its declaration. The controls may not
need to be updated at each call, but it should be decided on the context
side and not by a specific call by using a lock status in the Agc
structure for instance.
As the params_ local variable is not useful anymore, remove it here
too.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the stats are received, pass them with the context to the existing
AWB algorithm. IPAFrameContext now has a new structure to store the
gains calculated by the AWB algorithm.
When an EventFillParams event is received, call prepare() and set the new
gains accordingly in the params structure.
There is no more a need for the IPU3Awb::initialise() function, as the
params are always set in prepare().
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a new algorithm to manage the tone mapping handling of the
IPU3.
The initial algorithm is chosen to configure the gamma contrast curve
which moves the implementation out of AWB for simplicity. As it is
initialised with a default gamma value of 1.1, there is no need to use
the default table at initialisation anymore.
This demonstrates the way to use process() call when the EventStatReady
comes in. The function calculates the LUT in the context of a frame, and
when prepare() is called, the parameters are filled with the updated
values.
AGC is modified to take the new process interface into account.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement a new modular framework for algorithms with a common context
structure that is passed to each algorithm through a common API.
This patch:
- removes all the local references from IPAIPU3 and uses IPAContext
- implements the list of pointers and the loop at configure call on each
algorithm
- loops in fillParams on each prepare() call on the algorithm list
- loops in prepareStats on each process() call on the algorithm list
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
An increasing amount of data and information needs to be shared between
the components that build up to implement image processing algorithms.
Create a context structure which will allow us to work towards calling
algorithms in a modular way, and sharing information between the modules.
The IPA context is a global context set at configure time
(IPASessionConfiguration) and a per-frame context (IPAFrameContext) used
while streaming.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Tidy-up a bit the inclusions directive in the IPU3 IPA module.
In detail:
- ipu3.cpp is missing inclusions for:
std::abs from <cmath>
std::map from <map>
std::min/max from <algorithm>
std::numeric_limits from <limits>
std::unique_ptr from <memory>
std::vector from <vector>
and does not require <sys/mman.h>
- ipu3_agc has two not used inclusions in the header file and one the cpp file
and is missing <chrono> for std::literals::chrono_literals
- ipu3_awb is missing <algorithm> for std::sort and does not use
<numeric> or <unordered_map>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
All the IPU3 Camera controls are currently initialized by the pipeline
handler which initializes them using the camera sensor configuration and
platform specific requirements.
However, some controls are better initialized by the IPA, which might,
in example, cap the exposure times and frame duration to the constraints
of its algorithms implementation.
Also, moving forward, the IPA should register controls to report its
capabilities, in example the ability to enable/disable 3A algorithms on
request.
Move the existing controls initialization to the IPA, by providing
the sensor configuration and its controls to the IPU3IPA::init()
function, which initializes controls and returns them to the pipeline
through an output parameter.
The existing controls initialization has been copied verbatim from the
pipeline handler to the IPA, if not a for few line breaks adjustments
and the resulting Camera controls values are not changed.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Remove the need for callers to reference PROT_READ/PROT_WRITE directly
from <sys/mman.h> by instead exposing the Read/Write mapping options as
flags from the MappedFrameBuffer class itself.
While here, introduce the <stdint.h> header which is required for the
uint8_t as part of the Plane.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MappedFrameBuffer is a convenience feature which sits on top of the
FrameBuffer and facilitates mapping it to CPU accessible memory with
mmap.
This implementation is internal and currently sits in the same internal
files as the internal FrameBuffer, thus exposing those internals to
users of the MappedFramebuffer implementation.
Move the MappedFrameBuffer and MappedBuffer implementation to its own
implementation files, and fix the sources throughout to use that
accordingly.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In order for the CameraSensorHelper to be instantiated, we need to find
its factory using the camera sensor model name stored in
IPASettings::sensorModel. As we don't need to do it at each configure
call (the sensor is not changing in-between), implement the init call in
IPAIPU3 to do that.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
