| Age | Commit message (Collapse) | Author |
|---|
|
The kMaxLuminance constant is badly named, it's not a maximum luminance,
but the maximum integer value output by the AWB statistics engine for
per-channel averages. The constant is used in a single place, hardcoding
the value is actually more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation)
the gain to apply on the exposure value was only using the histogram.
Now that the global brightness of the frame is estimated too, we don't
need to remove part of the saturated pixels from the equation anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AWB estimates the color temperature, but it is not used at all. It
can be useful for debug purpose at least, but also for lux estimation
later, to be able to know the temperature estimated for a given frame.
Add a new member to the IPAFrameContext::awb for this purpose, and
update the value in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The minimum and maximum exposure are stored in lines. Replace it by
values in time to simplify the calculations.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Previously, the exposure value was calculated based on the estimated
shutter time and gain applied. Now that we have the real values for the
current frame, use those before estimating the next one and rename the
variable accordingly.
As the exposure value is updated in the beginning of the computation,
there is no need to initialize effectiveExposureValue anymore in the
configure call, and it can be a local variable and not a class variable
anymore.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When an image is partially saturated, its brightness is not increasing
linearly when the shutter time or gain increases. It is a big issue with
a backlight as the algorithm is fading to darkness right now.
Introduce a function to estimate the brightness of the frame, based on
the current exposure/gain and loop on it several times to estimate it
again and approach the non linear function.
Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When we compute the new gain, we use the iqMean_ and estimate an
exposure value gain to apply. Return early when the gain is less than
1%.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that we have the real exposure applied at each frame, remove the
early return based on a frame counter and compute the gain for each
frame.
Introduce a number of startup frames during which the filter speed is
1.0, meaning we apply instantly the exposure value calculated and not a
slower filtered one. This is used to have a faster convergence, and
those frames may be dropped in a future development to hide the
convergance process from the viewer.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the histogram is calculated, we check if a cell is saturated or not
before cumulating its green value. This is wrong, and it can lead to an
empty histogram in case of a fully saturated frame.
Use a constant to limit the amount of pixels within a cell before
considering it saturated. If at the end of the loop we still have an
empty histogram, then make it a fully saturated one.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=84
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pipeline handler populates the new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Make those values the frameContext::sensor values for the frame when the
EventStatReady event is received.
AGC also needs to use frameContext.sensor as its input values and
frameContext.agc as its output values. Modify computeExposure by passing
it the frameContext instead of individual exposure and gain values.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In case the maximum exposure received from the sensor is very high, we
can have a very high shutter speed with a small analogue gain, and it
may result in very slow framerate. We are not really supporting it for
the moment, so clamp the shutter speed to an arbitrary value of 60ms.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The struct RGB and struct AwbStatus are used only by the internal
implementation of the AWB algorithm module.
Move them into the private class declaration.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The AWB AwbStatus structure is contained within the Awb class.
Fix the Doxygen reference so that it can be found.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The tone mapping algorithm is currently undocumented.
Provide an introduction and overview to the implementation as the class
definition and document how the algorithm operates in the process and
prepare methods.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Let the algorithm perform its initial configuration. Implement
configure() to set a default gamma value and let process do the updates
needed.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The tone mapping algorithm calculates the gamma curve for every frame,
regardless of whether the gamma value has changed or not. This issue is
exasperated as we currently hardcode the gamma to a single value.
Optimise the implementation to only recalculate the look up table when
the gamma setting is changed, and store the gamma setting of the LUT
curve as part of the IPA context.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC class was not documented while developing. Extend that to
reference the origins of the implementation, and improve the
descriptions on how the algorithm operates internally.
While at it, rename the functions which have bad names.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we moved the diagram into the AWB class documentation, reword the
accumulator documentation to make it clear it is not meant to be used
only in AWB.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AWB algorithm is based on the Grey world algorithm and uses the
statistics generated by the ImgU for that. Explain how it uses those,
and reference the original algorithm at the same time.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of using constants for the analogue gains limits, use the
minimum and maximum from the configured sensor.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We currently control the exposure value by the shutter speed and the
analogue gain. We can't use the digital gain to have more than the
maximum exposure value calculated because we are not controlling it.
Remove unused code associated with this digital gain.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Simplify the reading by removing one level of indentation to return
early when the change is small between two calls.
Reword the LOG() message when we are correctly exposed, and move the
lastFrame_ variable to update it even if the change is small.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to calculate the gain on the previous exposure value calculated.
Now that we initialise the exposure and gain values in configure(), we
know the initial exposure value, and we can set it before any loop is
running.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We have mixed terms between gain, analogue gain and the exposure value
gain.
Make it clear when we are using the analogue gain from the sensor, and
when we are using the calculated gain to be applied to the exposure
value to reach the target.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Until now, the algorithm makes complex assumptions when dividing the
exposure and analogue gain values. Instead, use a simpler clamping of
the shutter speed first, and then of the analogue gain, based on the
limits configured.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We are filtering the exposure value to limit the gain to apply, but we
are not using the result.
Fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The gains are currently set as a uint32_t while the analogue gain is
passed as a double. We also have a default maximum analogue gain of 15
which is quite high for a number of sensors.
Use a maximum value of 8 which should really be configured by the IPA
and not fixed as it is now. While at it make it a double.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We are using arbitrary constants for the exposure limit in a number of
lines.
Instead of using static constants for those, use the limits of the
sensor passed in IPASessionConfiguration and cache those.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The exposure value is filtered in filterExposure() using the
currentExposure_ and setting a prevExposure_ variable. This is misnamed
as it is not the previous exposure, but a filtered value.
Rename it accordingly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When zones are used for the grey world algorithm, they are only
considered if their average green value is at least 32/255 to exclude
zones that are too dark and don't provide relevant colour information
(on the opposite side of the spectrum, saturated regions are excluded by
the ImgU statistics engine).
The algorithm requires a minimal number of zones that meet this criteria
in order to run. Now that we correct the black level, the 32/255 minimal
value is a bit high and prevents the algorithm for running in low-light
conditions. Lower the value to 16/255 to fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The AWB grey world algorithm tries to find a grey value and it can't do
it on over-exposed images. To exclude those, the saturation ratio is
used for each cell, and the cell is included only if this ratio is 0.
Now that we have changed the threshold, more cells may be considered as
partially saturated and excluded, preventing the algorithm from running
efficiently.
Change that behaviour, and consider 90% as a good enough ratio.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC frame context needs to be initialised correctly for the first
iteration. Until now, the IPA uses the minimum exposure and gain values
and caches those in local variables.
In order to give the sensor limits to AGC, create a new structure in
IPASessionConfiguration. Store the exposure in time (and not line
duration) and the analogue gain after CameraSensorHelper conversion.
Set the gain and exposure appropriately to the current values known to
the IPA and remove the setting of exposure and gain in IPAIPU3 as those
are now fully controlled by IPU3Agc.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We can have a saturation ratio per cell, giving the percentage of pixels
over a threshold within a cell where 100% is set to 0xff.
The parameter structure 'ipu3_uapi_awb_config_s' contains four fields to
set the threshold, one per channel.
The blue field is also used to configure the ImgU and make it calculate
the saturation ratio or not.
Set a green value saturated when it is more than 230 (90% of the maximum
value 255, coded as 8191). As this is the only channel used for AGC,
there is no need to apply it to the other ones.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
"using" directives are harmful in headers, as they propagate the
namespace short-circuit to all files that include the header, directly
or indirectly. Drop the directive from agc.h, and use utils::Duration
explicitly. While at it, shorten the namespace qualifier from
libcamera::utils:: to utils:: in agc.cpp for Duration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Awb::generateZones() member function fills the zones vector passed
as an argument, which is actually a member variable. Use it directly in
the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The intel-ipu3.h public interface from the kernel does not define how to
parse the statistics for a cell. This had to be identified by a process
of reverse engineering, and later identifying the structures from [0]
leading to our custom definition of struct Ipu3AwbCell.
[0]
https://chromium.googlesource.com/chromiumos/platform/arc-camera/+/refs/heads/master/hal/intel/include/ia_imaging/awb_public.h
To improve the kernel interface, a proposal has been made to the
linux-kernel [1] to incorporate the memory layout for each cell into the
intel-ipu3 header directly.
[1]
https://lore.kernel.org/linux-media/20211005202019.253353-1-jeanmichel.hautbois@ideasonboard.com/
Update our local copy of the intel-ipu3.h to match the proposal and
change the AGC and AWB algorithms to reference that structure directly,
allowing us to remove the deprecated custom Ipu3AwbCell definition.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that we know how the AWB statistics are formatted, use a simplified
loop in processBrightness() to parse the green values and get the
histogram.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixels output by the camera normally include a black level, because
sensors do not always report a signal level of '0' for black. Pixels at
or below this level should be considered black and to achieve that, we
need to substract an offset to all the pixels. This can be taken into
account by reading the lowest value of a special region on sensors which
is not exposed to light. This provides a substracting factor to be
able to adjust the expected black levels in the resulting images.
For a camera outputting 10-bit pixel values (in the range 0 to 1023) a
typical black level might be 64. It is a fixed value, obtained by
capturing a raw frame with minimum exposure and gain fixed to 1.0 while
covering the sensor (the darker the better). We consider it good enough
as a very first approximation, until we measure it during a tuning
process and include it in a configuration file
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The statistics buffer 'ipu3_uapi_awb_raw_buffer' stores the ImgU
calculation results in a buffer aligned horizontally to a multiple of 4
cells. The AWB loop should take care of it to add the proper offset
between lines and avoid any staircase effect.
It is no longer required to pass the grid configuration context to the
private functions called from process() which simplifies the code flow.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The gains have a precision u3.13, range [0, 8[ which means that a gain
multiplier value of 1.0 is represented as a multiplication by 8192 in
the ImgU. Correct the gains as this was misunderstood in the first
place.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The algorithm uses the statistics of a cell only if there is not too
much saturated pixels in it. The grey world algorithm works fine when
there are a limited number of outliers.
Consider a valid zone to be at least 80% of unsaturated cells in it.
This value could very well be configurable, and make the algorithm more
or less tolerant.
While at it, implement it in a configure() call as it will not change
during execution, and cache the cellsPerZone values estimated with
std::round as we are using cmath.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The variables mix the terms cell, region and zone. It can confuse the
reader, and make the algorithm more difficult to follow. Rename the
local variables to be consistent with their definitions:
- Cells are defined in Pixels
- Zones are defined in Cells
There is no "region" as such, so replace it with the correct term.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixel component sums for the Accumulator are inconsistent with other
similar structures such as the IPAFrameContext::awb::gains. Group the
red, green, and blue sums together in a struct and store them as
uint64_t to reduce potential architectural differences.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IspStatsRegion structure was introduced as an attempt to prepare for
a generic AWB algorithm structure. The structure name by itself is not
explicit and it is too optimistic to try and make a generic one for now.
Its role is to accumulate the pixels in a given zone. Rename it to
accumulator, and remove the uncounted field at the same time. It is
always possible to know how many pixels are not relevant for the
algorithm by calculating total-counted. The uncounted field was only
declared and not used. Amend the documentation accordingly.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The structure Ipu3AwbCell describes the AWB stats layout on the kernel
side. We will need it to be used by the AGC algorithm to be introduced
later, so let's make it visible from ipa::ipu3::algorithms and not only
for the AWB class.
The IspStatsRegion will be needed by AGC too, so let's move it in the
same namespace too.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPASessionConfiguration now has the grid configuration stored. Use
it it at prepare() and process() calls in AWB and pass it as a reference
to the private functions when needed.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPASessionConfiguration now has the grid configuration stored. Use
it at process() call in AGC and pass it as a reference to the private
functions when needed.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the interface is properly used by the AGC class, move it into
ipa::ipu3::algorithms and let the loops do the calls.
As we need to exchange the exposure_ and gain_ by passing them through the
FrameContext, use the calculated values in setControls() function to
ease the reading.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the interface is properly used by the AWB class, move it into
ipa::ipu3::algorithms and let the loops do the calls.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a new algorithm to manage the tone mapping handling of the
IPU3.
The initial algorithm is chosen to configure the gamma contrast curve
which moves the implementation out of AWB for simplicity. As it is
initialised with a default gamma value of 1.1, there is no need to use
the default table at initialisation anymore.
This demonstrates the way to use process() call when the EventStatReady
comes in. The function calculates the LUT in the context of a frame, and
when prepare() is called, the parameters are filled with the updated
values.
AGC is modified to take the new process interface into account.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
