| Age | Commit message (Collapse) | Author |
|---|
|
Open source Qt 5 has been effectively end of life since the release
of Qt 6, and Qt 6 has current LTS releases now.
This change ports qcam to Qt 6.2 and drops some of the baggage related
to Qt 5 that is no longer applicable.
Signed-off-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Keep the image aspect ratio when displaying in the viewfinder.
When the window is adjusted to a size that differs in aspect ratio to
the image, keep the image centered in the main window.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The 16-bit padded raw 10 and raw 12 formats are stored in memory in
little endian order, regardless of the machine's endianness. Read pixel
data as uint8_t values and hardcode bit shifting to little endian to fix
scanline packing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The 16-bit padded raw 10 and raw 12 formats are stored in memory in
little endian order, regardless of the machine's endianness. Swap the
16-bit values on big-endian machines when reading pixels from memory to
generate thumbnails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Add support for RAW10 and RAW12 to the dng_writer. This is needed on
imx8mp to produce tuning images. Both formats were tested on a debix
som with a imx335.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a thumbnail function for raw formats that are 16bit aligned.
This is needed for the upcoming RAW10 and RAW12 implemntation.
Use the new function for RAW16 as the thumbScanlineRaw_CSI2P produces
incorrect results for that format (it averages over adjacent bytes,
which works for the CSI formats).
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The old names lead to confusions. Rename to better express the intent.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for RAW16 formats to the DNGWriter helpers so that we can
produce dng files from the mali-c55.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In libtiff version 4.5.1 and later the CFA* tags were missing. This got
fixed in https://gitlab.com/libtiff/libtiff/-/commit/49856998c3d82e65444b47bb4fb11b7830a0c2be
Unfortunately the fix is not released yet, but the faulty libtiff is
contained in current buildroot. As a local fix is pretty easy and
without side effects, let's workaround that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Multiple local functions are defined in the global namespace without the
static keyword. This compiles fine for now, but will cause a missing
declaration warning when we enable them. To prepare for that, move the
function declaration to an anonymous namespace.
While at it, for consistency, include an existing static function in the
namespace and drop the static keyword.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is more efficient since only a single vector will be constructed,
and furthermore, it prevents the TOCTOU issue that might arise when
the list of cameras changes between the two queries.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Replace the manual CTRL+Q key sequence with QKeySequence::Quit. This
automatically maps to the native shortcut for the quit action,
regardless of the platform. Even though we don't expect qcam to run on
non-Linux platform, using a QKeySequence is still a good practice when
one exists.
This doesn't change qcam's behaviour, as the native quit key sequence is
CTRL+Q on Linux systems.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
C++20 deprecated implicit capture of `this` via `[=]`.
Fix that by explicitly capturing the necessary variables.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When file output is requested from cam app, it simply dumps the
processed data and it must be converted to a readable image format
manually. Let's add support for PPM output file format to make files
produced by cam directly readable by image display and processing
software.
For now, only BGR888 output format, which is the simplest one to use, is
supported but nothing prevents adding support for other output formats
if needed. Nevertheless, they would typically need byte reordering or
other conversions for PPM file format. It may be better to find a way to
dump the image data in other output formats directly using some of the
already existing file formats or raw file format converters.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Before adding more tests and more helper classes to lc-compliance,
reorganize the source tree to split test and helpers in two separate
directories.
While at it, rename the 'SimpleCapture' class and its derived classes to
just 'Capture'. Rename the source files accordingly.
Re-sort headers inclusions to please checkstyle.py too.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Fix a small typo in a comment.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a request fails to queue it is completed but with its status set to
RequestCancelled. Add a check in the requestComplete callback to make
sure that the request was completed successfully.
For the SimpleCaptureUnbalanced test we need to do this check only if
the capture isn't over yet, otherwise the few extra requests that get
cancelled at the end, which is the normal behavior, will make the test
fail.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
parseRectangles currently always parses Rectangle controls as an array
of Rectangles. This causes non-array Rectangle controls to not be parsed
correctly, as when the ControlValue is get()ed, the non-array assertion
will fail.
Set the ControlValue with a single Rectangle in case a single Rectangle
has been specified in the yaml capture script to fix that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Clearly all cases in the switch are already satisfied, but some
compilers fail to realize this and spit out an error:
Compiler version: gcc 11.2.0 "aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.11) 11.2.0"
../../src/apps/common/dng_writer.cpp: In function ‘void thumbScanlineIPU3(const FormatInfo&, void*, const void*, unsigned int, unsigned int)’:
../../src/apps/common/dng_writer.cpp:277:55: error: ‘val4’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:48: error: ‘val3’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:41: error: ‘val2’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
../../src/apps/common/dng_writer.cpp:277:34: error: ‘val1’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
277 | uint8_t value = (val1 + val2 + val3 + val4) >> 10;
| ^~~~
Add a default case for the switch-case on a modulo to silence this.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=207
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The capture_test.cpp file was added in the source list of meson in the
wrong place. Fix it so the list is alphabetically sorted.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
lc-compliance depends on support for skipping tests in gtest (commit
00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum
version for the gtest dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a '--orientation|-o' option to the cam test application to set
an orientation to the image stream.
Supported values are the ones obtained by applying flips to the camera
sensor:
- rot0: no rotation
- rot180: rotate 180 degrees
- flip: vertical flip
- mirror: horizontal flip
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Qt supports RGB565 natively; add support for the format by mapping
the libcamera format to Qt's representation of it.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The meson style, which libcamera follows, recommends a space before
colons in function parameters. Fix the style violations through the
project.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When packaging libcamera, distributions may break IPA module signatures
if the packaging process strips binaries. This can be fixed by resigning
the modules, but the process is error-prone.
Add a command line ipa-verify utility that tests the signature on an IPA
module to help packagers. The tool takes a single argument, the path to
an IPA module shared object, and expects the signature file (.sign) to
be in the same directory.
In order to access the public key needed for signature verification, add
a static function to the IPAManager class. As the class is internal to
libcamera, this doesn't affect the public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Now that `Camera::generateConfiguration()` takes a `libcamera::Span`
of `StreamRole`, remove the `StreamRoles` type, which was an alias
to `std::vector<libcamera::StreamRole>`.
The removal has two reasons:
- it is no longer strictly necessary,
- its presence may suggest that that is the preferred (or correct)
way to build/pass a list of `StreamRole`.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix small checkstyle report on roles initialiser]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The switch statement checks `roles.size()` with cases for 1 and 2,
so in the `default` branch, `role.size() > 2`, i.e. it is always
different from 1, so the check is unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
A new warning has been introduced to gcc-13 that produces a false
positive on the cam file sink object:
src/cam/file_sink.cpp:92:45: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i];
| ^~~~
src/cam/file_sink.cpp:92:81: note: the temporary was destroyed at the end of the full expression '(& buffer->libcamera::FrameBuffer::metadata())->libcamera::FrameMetadata::planes().libcamera::Span<const libcamera::FrameMetadata::Plane>::operator[](i)'
92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i];
| ^
cc1plus: all warnings being treated as errors
Workaround this issue by refactoring the code to take a local const
copy of the bytesused value, rather than a local const reference to the
plane.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=185
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107532
Co-developed-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Commit and comment reworded prior to merge]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is no need to wrap DRM::AtomicRequest in std::unique_ptr<>
in KMSSink::start(). Remove it so that the syntax becomes similar to
what we have in KMSSink::stop().
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of having bool return type and an out parameter, use
std::optional<libcamera::StreamRole> to return from
StreamKeyValueParser::parseRole().
Meanwhile at it, re-word an existing comment to make it lucid.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The raw pixel format in form of the fourcc integer is not easily readable.
Use the string representation instead for easier debugging.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the simple capture tests, in the capture functions, the Requests were
auto-deallocated by the function going out of scope after the test
completed. However, before the end of the scope, the Framebuffers that
the Requests referred to were manually freed. Thus when the Requests
were deallocated, they tried to cancel their Framebuffers, which involve
setting the status to cancelled, which obviously causes a segfault
because the Framebuffers had already been freed.
Fix this by moving the list of Requests to a member variable and
deallocating them before deallocating the Framebuffers at stop() time.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for parsing array controls to the cam capture script.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The StreamRole enum has enumerators such as 'Raw' that are too generic
to be in the global libcamera namespace. Turn it into a scoped enum to
avoid namespace clashes, and update users accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The parameter 'request' is only used in an assert. assert is only defined
for debug builds and release builds will not use the parameter, resulting
in warnings messages only for non-debug builds.
Fix this by flagging the parameter as 'maybe_unused'.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Multiple source files in the src/apps/cam/ directory are used by cam,
qcam and lc-compliance. They are compiled separately for each
application. Move them to a new src/apps/common/ directory and compile
them in a static library to decrease the number of compilation
operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When libtiff-4 is not found, the private camera_ member of the FileSink
class is set but never used. This causes a compilation error with clang:
In file included from ../../src/apps/cam/file_sink.cpp:19:
../../src/apps/cam/file_sink.h:39:27: error: private field 'camera_' is not used [-Werror,-Wunused-private-field]
const libcamera::Camera *camera_;
Fix by making the camera_ member field conditional on HAVE_TIFF.
Fixes: 6404b163bcbb ("cam: file_sink: Add support for DNG output")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libtiff is a shared dependency between cam and qcam, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libevent is a shared dependency between cam and lc-compliance, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The cam and qcam test application share code, currently through a crude
hack that references the cam source files directly from the qcam
meson.build file. To prepare for the introduction of hosting that code
in a static library, move all applications to src/apps/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
