summaryrefslogtreecommitdiff
path: root/src/android
AgeCommit message (Collapse)Author
2020-12-11android: camera_device: Introduce Camera3StreamConfigHirokazu Honda
Camera3StreamConfig is a new class to store camera3_stream and types with associated StreamConfiguration. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-07android: camera_device: Stop camera when re-configuring itJacopo Mondi
The Android camera device HAL3 specification does not require a camera to go through any explicit close() call between configurations. It is legitimate for a camera to be configured, a number of requests processed and then re-configured again without any explicit stop. The libcamera Android camera HAL starts the Camera at the first handled request, and only stops it at camera close time. This means that two camera configuration attempts in the same streaming session are only interleaved by capture requests handling. The libcamera::Camera state machine requires the Camera to be stopped before any configuration take place, and this currently doesn't happen. Fix this by stopping the camera and the associated worker thread if a configuration attempt is performed while the Camera is in running state. This patch fixes cros_camera_test: Camera3PreviewTest/Camera3SinglePreviewTest.Camera3BasicPreviewTest/0 Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-07android: camera_device: Initialize pixel array propertiesJacopo Mondi
Initialize pixel array properties in the Android camera HAL inspecting the camera properties. If the camera does not provide any suitable property, not static metadata is registered to the Android framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-02android: camera_device: Check capture_request validityJacopo Mondi
Make sure the 'camera3_capture_request_t *' provided to CameraDevice::processCaptureRequest() is valid before attempting to access it. This patch fixes cros_camera_test: Camera3FrameTest/Camera3InvalidRequestTest.NullOrUnconfiguredRequest/* Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-02android: camera_mode: Reserve 'data' vectorsJacopo Mondi
The CameraDevice::getStaticMetadata() function populates the entries for Android's static metadata by walking the ControlInfo supported values reported by the libcamera pipeline. The number of entries to be passed to Android is computed using the vector's size which is initialized at vector creation time to the maximum number of available entries. In order to report the correct number of metadata do not create the vector with the largest possible number of elements but only reserve space for them using std::vector::reserve() which does not modify the vector's size. This patch fixes cros_camera_test: Camera3DeviceTest/Camera3DeviceDefaultSettings.ConstructDefaultSettings/1 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-11-17android: jpeg: Use LGPL-2.1 license for post_processor_jpeg.cppLaurent Pinchart
The JPEG post-processor is marked as licensed under GPL-2.0-or-later. This is an oversight and unvoluntary. License it under the LGPL-2.1-or-later as the rest of the camera HAL implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Umang Jain <email@uajain.com> Acked-by: Hirokazu Honda <hiroh@chromium.org>
2020-10-28android: jpeg: post_processor_jpeg: Embed thumbnail into Exif metadataUmang Jain
Embed a Jpeg-encoded thumbnail into Exif metadata using the Thumbnailer class that got introduced. Introduce a helper function in Exif class for setting the thumbnail data. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Add todo comment, and Compression enum] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-28android: jpeg: Introduce a simple image thumbnailerUmang Jain
Add a basic image Thumbnailer class for the frames being captured. Currently, the thumbnailer can scale NV12 frames. It shall be used to generate a thumbnail image for EXIF metadata, in the subsequent commit. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-28android: jpeg: encoder_libjpeg: Allow encoding raw frame bytesUmang Jain
Allow encoding frames which are directly handed over to the encoder via a span or vector i.e. a raw frame bytes. Introduce an overloaded EncoderLibJpeg::encode() with libcamera::Span source parameter to achieve this functionality. This makes the libjpeg-encoder a bit flexible for use case such as compressing a thumbnail generated for Exif. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-28android: camera_device: Mark toPixelFormat() a const functionHirokazu Honda
CameraDevice::toPixelFormat() doesn't change the state of the CameraDevice. Marks it a const function so that it can be called in const functions. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-28android: camera_device: Fix crash of accessing a missing map elementHirokazu Honda
std::map::at() searches std::map by the given key. The commit e1f9fdb8a5bd ("android: camera_device: Remove shadowing FrameBuffer usage") uses it with 0 to intend to accessing the first element of the map, but actually access the element whose key is nullptr. This causes the crash because the map doesn't have the element with nullptr. This fixes the issue by replacing the std::map::at() operation by std::map::begin(). Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Updated commit message] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-26android: camera_device: Handle LENS_SHADING_MAP_MODESJacopo Mondi
Register the ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES static metadata property inspecting the values retuned by the pipeline handler. Add one entry and reserve in static metadata pack enough space to support all the 2 available lens shading map modes Android defines. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26android: camera_device: Handle COLOR_CORRECTION_ABERRATION_MODEJacopo Mondi
Register the ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES static metadata property inspecting the values retuned by the pipeline handler. Reserve in the static metadata pack enough space to support all the 3 available color correction aberration modes Android defines. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26android: camera_device: Handle NOISE_REDUCTION_MODESJacopo Mondi
Register the ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES static metadata property inspecting the values retuned by the pipeline handler. Reserve in the static metadata pack enough space to support all the 5 available noise reduction modes Android defines. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26android: camera_device: Report PIPELINE_MAX_DEPTHJacopo Mondi
Register the ANDROID_REQUEST_PIPELINE_MAX_DEPTH static property inspecting the value reported by the pipeline handler. If the Camera does not report any suitable value, default the static property to 2. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-23android: jpeg: encoder: Use pass-by-value for Exif parameterUmang Jain
Following the reasoning of pass-by-value for libcamera::Span parameters from 90c193f2a700("android: Modify Encoder interface") i.e. they are easy to copy/move/construct, align the Exif parameter passing to the encoder interface in this consistent way. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-23android: jpeg: Drop "libcamera::" namespace from functions' argumentsUmang Jain
Drop "libcamera::" from functions' arguments for *.cpp files as they have using namespace libcamera; directive in the beginning. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-23libcamera: Declare empty virtual destructors as defaultedLaurent Pinchart
The base class of polymorphic classes is required to declare a destructor. Several of these are empty, and can thus be declared as defaulted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: metadata: Disable -WshadowKieran Bingham
Do not warn on shadowed variables inside the metadata library, which is directly imported without modifications. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: Remove shadowing FrameBuffer usageKieran Bingham
A FrameBuffer *buffer is used to obtain the 'first' buffer from a request which is used purely to identify the timestamp from the metadata in two locations. Rather than keep the FrameBuffer instance around, which then causes further usages of FrameBuffers to be shadowed, store the timestamp locally. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: use member style on Camera3RequestDescriptorKieran Bingham
Use the postfixed '_' member variable naming style for the Camera3RequestDescriptor structure, which in turn ensures that variable shadowing does not occur in the member initializer list of the constructor. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: Use existing variable definitionsKieran Bingham
Prevent variable shadowing by removing the redeclaration of variables with the same name (and type) where the existing variable can be reused. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_stream: Make some member variables constantHirokazu Honda
CameraStream initializes several member variables in the initializer list. Some of them are unchanged after. This makes them constant. Especially, doing to |cameraDevice_| represents CameraStream doesn't have the ownership of it. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: post_processor_jpeg: Make |cameraDevice_| constantHirokazu Honda
PostProcessorJpeg doesn't have the ownership of CameraDevice given in the constructor. To clarify it, this makes the member variable constant. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: Modify Encoder interfaceHirokazu Honda
In Encoder::encode(), the |source| argument doesn't have to be a pointer. This replaces its type, const pointer, with const reference as the latter is preferred to the former. libcamera::Span is cheap to construct/copy/move. We should deal with the type as pass-by-value parameter. Therefore this also drops the const reference in the |destination| argument. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: Modify PostProcessor interfaceHirokazu Honda
In PostProcessor::process(), the |source| argument doesn't have to be a pointer. This replaces its type, const pointer, with const reference as the latter is preferred to the former. libcamera::Span is cheap to construct/copy/move. We should deal with the type as pass-by-value parameter. Therefore this also drops the const reference in the |destination| argument. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20android: Omit extra semicolonsHirokazu Honda
The end semicolons with LOG_DECLARE_CATEGORY and LOG_DEFINE_CATEGORY are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-16android: jpeg: Port to PostProcessor interfaceUmang Jain
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg. This encapsulates the encoder and EXIF generation code into the PostProcessorJpeg layer and removes these specifics related to JPEG, from the CameraStream itself. Signed-off-by: Umang Jain <email@uajain.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
2020-10-16android: post_processor: Introduce a PostProcessor interfaceUmang Jain
Introduce a PostProcessor interface for the streams that require any kind of processing (refer to CameraStream::Type) for their consumption by the HAL layer. The PostProcessor interface can be configured via configure() and the actual processing can be initiated using process(). The post-processing layer can be extended to have multiple post processors for various stream configurations. As of now, we only have one post processor (JPEG), hence the subsequent commit will port its function to this interface. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-16android: CameraStream: Fix nitpick indentation for mutex_Umang Jain
Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-14android: camera_stream: Add documentationJacopo Mondi
Add a brief documentation block to the CameraStream class. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-14android: camera_device: Queue request using WorkerJacopo Mondi
Add a CameraWorker class member to the CameraDevice class and queue capture requests to it to delegate its handling. Start and stop the CameraWorker when the libcamera::Camera is started or stopped. Tie the CaptureRequest lifetime to the Camera3RequestDescriptor's one by storing it as unique_ptr<> in the descriptor to simplify handling of request creation and deletion. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-14android: camera_worker: Introduce CameraWorkerJacopo Mondi
The Android camera framework provides for each buffer part of a capture request an acquisition fence the camera HAL is supposed to wait on before using the buffer. As the libcamera HAL runs in the camera service thread, it is not possible to perform a synchronous wait there. Introduce a CameraWorker class that runs an internal thread to wait on a set of fences before queueing a capture request to the libcamera::Camera. Fences completion is handled through a simple poll, similar in implementation to the sync_wait() function provided by libdrm. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-12libcamera, android, cam, gstreamer, qcam, v4l2: Reuse RequestPaul Elder
Allow reuse of the Request object by implementing reuse(). This means the applications now have the responsibility of freeing the Request objects, so make all libcamera users (cam, qcam, v4l2-compat, gstreamer, android) do so. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-10android: jpeg: Use LGPL-2.1 licenseUmang Jain
The jpeg components are licensed under GPL-2.0-or-later. This is an oversight and unvoluntary. License them under the LGPL-2.1-or-later as the rest of the camera HAL implementation. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-07android: camera_device: Clear streams_ at stop timeJacopo Mondi
When the CameraDevice is stopped, we need to clear the vector of CameraStream instances to make sure they get deleted and all the resources they have acquired get released. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Add stream mapping logJacopo Mondi
To ease following how Android streams get mapped to libcamera ones add a (quite verbose) printout before queueing a request to libcamera. The output looks like: 0 - (320x240)[0x00000022] -> (320x240)[NV12] (direct) 1 - (640x480)[0x00000021] -> (640x480)[NV12] (internal) Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Use CameraStream buffersJacopo Mondi
Now that CameraStream that require internal memory allocation have been instrumented with a FrameBuffer pool, use them to create intermediate buffers in the CameraDevice. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Create buffer poolJacopo Mondi
Add a FrameBufferAllocator class member to the CameraStream class. The allocator is constructed for CameraStream instances that needs internal allocation and automatically deleted. Allocate FrameBuffers using the allocator_ class member in the CameraStream class at CameraStream::configure() time and add two methods to the CameraStream class to get and put FrameBuffer pointers from the pool of allocated buffers. As buffer allocation can take place only after the Camera has been configured, move the CameraStream configuration loop in the CameraDevice class after camera_->configure() call. The newly created pool will be used to provide buffers to CameraStream that need to provide memory to libcamera where to deliver frames. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Make CameraStream configuration nicerJacopo Mondi
Loop over the CameraStream instances and use their interface to perform CameraStream configuration. Modify CameraStream::configure() to configure the android stream buffer count and to retrieve the StreamConfiguration by index instead of receiving it as a parameter. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Return Camera as shared_ptrJacopo Mondi
Return the Camera wrapped by the CameraDevice as a shared_ptr. This will be required to construct the FrameBuffer allocator in the CameraStream class. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Fetch format and size from configurationJacopo Mondi
Fetch the format and size of the libcamera::StreamConfiguration associated with a CameraStream by accessing the configuration by index. This removes the need to store the libcamera stream format and sizes as class members and avoid duplicating information that might get out of sync. It also allows to remove the StreamConfiguration from the constructor parameters list, as it can be identified by its index. While at it, re-order the constructor parameters order. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Retrieve Stream and ConfigurationJacopo Mondi
It's a common pattern to access the libcamera::Stream and libcamera::StreamConfiguration using the CameraStream instance's index. Add two methods to the CameraStream to shorten access to the two fields. This allows removing the index() method from the class interface. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Move processing to CameraStreamJacopo Mondi
Move the JPEG processing procedure to the individual CameraStream by augmenting the class with a CameraStream::process() method. This allows removing the CameraStream::encoder() method. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Construct with Android streamJacopo Mondi
Pass the android camera3_stream_t, and a libcamera::StreamConfiguration to identify the source and destination parameters of this stream. Pass a CameraDevice pointer to the CameraStream constructor to allow retrieval of the StreamConfiguration associated with the CameraStream. Also change the format on which the CameraDevice performs checks to decide if post-processing is required, as the libcamera facing format is not meaningful anymore, but the Android requested format should be used instead. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Delegate Encoder constructionJacopo Mondi
Delegate the construction of the encoder to the CameraStream class for streams that need post-processing. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Add CameraStream::TypeJacopo Mondi
Define the CameraStream::Type enumeration and assign it to each CameraStream instance at construction time. The CameraStream type will be used to decide if memory needs to be allocated on its behalf or if the stream is backed by memory externally allocated by the Android framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Break out CameraStreamJacopo Mondi
Break CameraStream out of the CameraDevice class. No functional changes, only the code is moved. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: jpeg: exif: Sanitize ASCII strings with utils::toAscii()Umang Jain
Use the newly introduced utils::toAscii() utility to remove all non-ASCII characters for EXIF_FORMAT_ASCII strings. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-02src: android: exif: Set the class byte orderingKieran Bingham
The exif object sets the byte ordering on construction, and then during later calls re-states the byte ordering when setting values. It could be argued that this ordering should already be known to the exif library and is redundant, but even so we must provide it. Ensure we are consistent in always using the same byte ordering by setting a private class member to re-use a single value. Reviewed-by: Umang Jain <email@uajain.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>