| Age | Commit message (Collapse) | Author |
|---|
|
In the FrameBuffer interface the stream will not be available from the
buffer object as the buffer might be allocated externally. The
application needs to explicitly state which stream the buffer is being
added for to the request.
Extend the addBuffer() function to get this information explicitly from
the caller.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
signal
The stream to buffer map in the requestCompleted signal is taken
directly from the request which is part of the same signal. Remove the
map as it can be fetched directly from the request.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the newly introduced InvocationTypeBlocking message type to replace
the blocking message delivery implemented with the ThreadRPC class in the
Android camera HAL.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow specifying a different connection type than ConnectionTypeQueued
for Object::invokeMethod().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a utils::hex() function that simplifies writing hexadecimal values
to an ostream. The function handles the '0x' prefix, the field width and
the fill character automatically. Use it through the libcamera code
base, and add a test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the list of available static metadata tags (characteristicKeys),
of supported controls (requestKeys) and produced metadata (resultKeys)
in the static metadata pack.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
According to the Android camera HALv3 documentation, the request
template metadata pack should not be modified after it is returned to
the camera stack from the HAL.
Currently, the same metadata pack is used for all types of template
request, without updating the capture intent there contained to match
the requested template type, as correctly reported by the
cros_camera_test test application.
In order to avoid modifying the single request template already returned
to the camera stack in order to update the capture intent it contains,
create a map that associates a dedicated template to each supported
capture type.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Simplify the implementation of metadata handling in the CameraDevice
class by using the new CameraMetadata helper class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The new CameraMetadata helper class wraps the Android camera_metadata_t
to simplify its usage.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use more opportune sizes, manually calculated, for the generated request
template.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two missing tags from the request template generated by the HAL.
The tags are reported as missing by the cros_camera_test tool.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove metadata tags wrongly added to the request template constructed
by the libcamera HAL.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use more opportune sizes for the static metadata pack, and for the
dynamic metadata sizes which where wrongly set to use the ones defined
for the static pack.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add all the static metadata keys part of the BC (backward compatible)
metadata group, which represent the minimum requirement for devices
supporting the LIMITED hardware level.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraDevice class has a mechanism to cache static metadata, but
doesn't use it. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraManager class is not supposed to be instantiated multiple
times, which led to a singleton implementation. This requires a global
instance of the CameraManager, which is destroyed when the global
destructors are executed.
Relying on global instances causes issues with cleanup, as the order in
which the global destructors are run can't be controlled. In particular,
the Android camera HAL implementation ends up destroying the
CameraHalManager after the CameraManager, which leads to use-after-free
problems.
To solve this, remove the CameraManager::instance() method and make the
CameraManager class instantiable directly. Multiple instances are still
not allowed, and this is enforced by storing the instance pointer
internally to be checked when an instance is created.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager starts the libcamera CameraManager and creates
CameraProxy instances for each camera in the system. Clean up those
resources when the CameraHalManager terminates.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::close() method isn't used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager starts a thread that is never stopped. This leads
to the thread being destroyed while running, which causes a crash. Fix
this by stopping the thread and waiting for it to finish in the
destructor of the CameraHalManager.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraProxy is constructed with a Camera instance passed through a
shared pointer. It forwards it to the CameraDevice constructor, which
takes a reference used for the sole purpose of making an internal copy
of the shared pointer. Both constructors can thus take a const reference
instead of a value or a mutable reference. This optimises the
constructors slightly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the manual implementation of asynchronous method invocation
through a custom message with Object::invokeMethod(). This simplifies
the thread RPC implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::getCameraInfo() validates the camera id it
receives from the camera service, and in doing so generates a compiler
error with gcc as the id is an unsigned integer and can never be
negative:
../src/android/camera_hal_manager.cpp: In member function ‘CameraProxy* CameraHalManager::open(unsigned int, const hw_module_t*)’:
../src/android/camera_hal_manager.cpp:89:9: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
if (id < 0 || id >= numCameras()) {
Fix it by removing the unneeded comparison.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::getCameraInfo() validates the camera id it
receives from the camera service, and in doing so compares it with an
unsigned integer, generating a compiler error:
src/android/camera_hal_manager.cpp:121:9: error: comparison of integers of different signs: 'int' and 'unsigned int' [-Werror,-Wsign-compare]
if (id >= numCameras() || id < 0) {
~~ ^ ~~~~~~~~~~~~
Fix this by turning the id into an unsigned int, as camera ids can't be
negative. If a negative id is received from the camera service it will
be converted to a large unsigned integer that will fail the comparison
with numCameras().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add libcamera Android Camera HALv3 implementation.
The initial camera HAL implementation supports the LIMITED hardware
level and uses statically defined metadata and camera characteristics.
Add a build option named 'android' and adjust the build system to
selectively compile the Android camera HAL and link it against the
required Android libraries.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add SPDX tag to the android metadata library files licensed under
Apache-2.0.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Import the Android camera metadata library from the ChromiumOS build
system.
The camera metadata library has been copied from
https://chromium.googlesource.com/chromiumos/platform2
at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03
The original path in the Cros platform2/ repository is:
camera/android/libcamera_metadata/src
Create a new build target for the camera metadata library to
create a static library to link against libcamera.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
