| Age | Commit message (Collapse) | Author |
|---|
|
Since we set entries with android tags directly, which are enums and not
arithmetic types, the addEntry template fails to match. Fix this by also
allowing enum values in addEntry.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add convenience functions for checking if an entry is present in a
CameraMetadata instance, and to check if an array entry includes a
specific value.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The validation of RAW stream support is performed in two different
places:
- At initializeStreamConfigurations() time, by verifying that the
libcamera format associated with HAL_PIXEL_FORMAT_BLOB is a Raw format
and ensuring the Camera successfully validates it
- As initializeStaticMetadata() time by generating a CameraConfiguration
for the Raw stream role and ensuring it is a Raw format with a 16 bit
depth
The first check is used to build the list of supported Raw stream
resolutions. The latter is used to register the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability.
As building the list of supported Raw streams doesn't serve any
purpose if the RAW capability is not registered, centralize the Raw
format support verification at initializeStreamConfigurations() time by
ensuring the supported format is a Raw one with a 16 bit depth.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The getYUVResolutions() and getRawResolutions() functions are called
from the initializeStreamConfigurations() function, which is called by
initialize().
Rationalize the function naming scheme by renaming the two functions to
initializeYUVResolutions() and initializeRawResolution().
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When building the list of supported YUV streams in getYUVResolutions()
the CameraConfiguration provided by the caller as first parameters is used.
As the CameraConfiguration will be later actually applied to the Camera,
avoid any possible overlap of the configuration parameters by using a
throw-away CameraConfiguration generated for the Viewfinder stream role
in getYUVResolutions().
It's also nicer to avoid having two functions with a similar purpose
such as getYUVResolutions() and getRawResolutions() with different
parameter lists, as the presence of a CameraConfiguration as first
parameter might be confusing to the reader.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Now that all Extensible classes expose a _d() function that performs
appropriate casts, the LIBCAMERA_D_PTR brings no real additional value.
Replace it with direct calls to the _d() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instances of the CameraDevice class should never be copied or moved, as
they represent resources, Disable copying and moving for the class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The CameraHalManager should be instantiated once only, and never copied
or moved. Disable copying and moving.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Commit 7532caa2c77b ("android: camera_device: Reset config_ if
Camera::configure() fails") reworked the configuration sequence to
ensure that the CameraConfiguration pointers gets reset when
configuration fails. This inadvertently causes a null pointer
dereference, as the CameraStream constructor accesses the camera
configuration through CameraDevice::cameraConfiguration() before the
internal config_ pointer is set.
Fix this by passing the configuration pointer explicitly to the
CameraStream constructor.
Fixes: 7532caa2c77b ("android: camera_device: Reset config_ if Camera::configure() fails")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
processCaptureRequest()
Add a check on processCaptureRequest() if a given capture
request contains a camera stream that has been configured.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraBuffer::Private::planeAddr() functions are declared but not
defined (and of course not used). Drop them.
Fixes: d8d6a78f223e ("android: Introduce Chromium OS buffer manager")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The config_ pointer is reset in all error paths of the
CameraDevice::configureStreams() function, except when
Camera::configure() fails. Fix it by using a local unique pointer to
store the configuration until the end of the function, to avoid similar
issues in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Headers which must not be exposed as part of the public libcamera API
should include base/private.h.
Any interface which includes the private.h header will only be able to
build if the libcamera_private dependency is used (or the
libcamera_base_private dependency directly).
Build targets which are intended to use the private API's will use the
libcamera_private to handle the automatic definition of the inclusion
guard.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move span, and adjust the Doxygen exclusion as well.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the class support infrastructure to the base library.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the utils functionality to the libcamera/base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ChromeOS specific Android HAL support was overly-complex to support
linking an additional library, and then passing the built object into
the libcamera.so build.
Now that it has its own distinct libcamera-hal.so, simplify the CrOS
integration to build directly into that library.
The removal of the -Wno-shadow here is intentional, as it is not
required for compilation of the camera3_hal.o object.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera Android HAL implementation should not be an integral part
of libcamera, but a support library that utilises the libcamera public
API.
Move the implementation to its own distinct library.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
CameraBuffer::plane() should be accessed in zero based index.
Fix the wrong indexing in CameraBuffer::plane() in
cros_camera_buffer.cpp.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The camera_device.cpp has grown a little too much, and it has quickly
become hard to maintain. Break out the handling of the static
information collected at camera initialization time to a new
CameraCapabilities class.
Break out from the camera_device.cpp file all the functions related to:
- Initialization of supported stream configurations
- Initialization of static metadata
- Initialization of request templates
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Sort the list of the Android HAL source file alphabetically.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There were some CameraMetadata calls that were left in the old version.
Update them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
HAL_PIXEL_FORMAT_RAW_OPAQUE is requested only for
Zero-Shutter-Lag (ZSL). ZSL requires RAW and YUV reprocessing.
Since either of them is not supported by libcamera, supporting
RAW_OPAQUE format doesn't make sense. Drop the format from the
supported format list.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report to the Android camera stack the list of supported test
pattern modes constructed by inspecting the values reported
by libcamera through the controls::draft::TestPatternMode control.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the flush() camera operation in the CameraDevice class
and make it available to the camera framework by implementing the
operation wrapper in camera_ops.cpp.
Introduce a new camera state State::Flushing to handle concurrent
flush() and process_capture_request() calls.
As flush() can race with processCaptureRequest() protect it
by introducing a new State::Flushing state that
processCaptureRequest() inspects before queuing the Request to the
Camera. If flush() is in progress while processCaptureRequest() is
called, return the current Request immediately in error state. If
flush() has completed and a new call to processCaptureRequest() is
made just after, start the camera again before queuing the request.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the introduction of an additional mutex class member, the name of
the existing one is too generic.
Rename CameraDevice::mutex_ in CameraDevice::descriptorsMutex_ and use the
libcamera provided libcamera::Mutex type to align the style with the
rest of the code base.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Guard access to the camera state and the start/stop sequences
with a mutex.
Currently only stop() and the first call to processCaptureRequest()
start and stop the camera, and they're not meant to race with each
other. With the introduction of flush() the camera can be stopped
concurrently to a processCaptureRequest() call, hence access to the
camera state will need to be protected.
Prepare for that by guarding the existing paths with a mutex.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraDevice class uses std::scoped_lock<> to guard access to the
class' descriptors_ member.
std::scoped_lock<> provides a set of features that guarantees safety
when locking multiple mutexes in a critical section, while for single
locks happening in a scoped block it does not provides benefits compared
to the simplest std::unique_lock<> which libcamera provides the
MutexLocker type for.
Replace usage of std::scoped_lock<> with libcamera::MutexLocker to make
the implementation consistent with the rest of the code base.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraDevice class maintains the camera state in the 'running_'
boolean flag to check if the camera has to be started at the first
received process_capture_request() call which happens after the camera
had been stopped.
So far this was correct, as the operations that change the camera
could only start or stop the camera, so a simple boolean flag
was enough.
To prepare to handle the flush() operation that will introduce a new
'flushing' state, replace the simple plain boolean flag with an
enumeration of values that define the CameraState.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current implementation of CameraDevice::requestComplete() which
handles event notification and calls the framework capture result
callback does not handle error notification precisely enough.
In detail:
- Error notification is an asynchronous callback that has to be notified
to the framework as soon as an error condition is detected, and it
independent from the process_capture_result() callback
- Error notification requires the HAL to report the precise error cause,
by specifying the correct CAMERA3_MSG_ERROR_* error code.
The current implementation only notifies errors of type
CAMERA3_MSG_ERROR_REQUEST at the end of the procedure, before the
callback invocation.
Rework the procedure to:
- Notify CAMERA3_MSG_ERROR_DEVICE and perform library tear-down in case
a Fatal error is detected
- Notify CAMERA3_MSG_ERROR_REQUEST if the libcamera::Request::status is
different than RequestCompleted and immediately call
process_capture_result() with all buffers in error state.
- Notify the shutter event as soon as possible
- Notify CAMERA3_MSG_ERROR_RESULT in case the metadata cannot be
generated correctly and call process_capture_result() with the right
buffer state regardless of metadata availability.
- Notify CAMERA3_MSG_ERROR_BUFFER for buffers whose post-processing
failed
While at it, return the CameraStream buffer by calling
cameraStream->putBuffer() regardless of the post-processing result.
No regression detected when running CTS in LIMITED mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report ANDROID_SENSOR_FRAME_DURATION as an available result key for CTS
to read out the value of frame duration we set in
CameraDevice::getResultMetadata(). Failing to do so might fail the CTS
test:
- android.hardware.camera2.cts.CaptureRequestTest#testNoiseReductionModeControl
Fixes: 3beb1accac1d ("android: camera_device: Fix sensor frame duration")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Chrome OS-specific code has multiple function parameters that are
not used. This results in compilation warnings. Fix them with
[[maybe_unused]].
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The standard C library close() and lseek() functions require inclusion
of the unistd.h header. Include it explicitly where needed instead of
relying on indirect inclusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The sensor frame duration should be set by IPA. Get the information for
the result metadata from libcamera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
We need a separate control to report the nominal frame duration, but
it's also useful to report the min/max frame duration values that will
be used. Split the FrameDurations control into FrameDuration and
FrameDurationLimits respectively to support both of these.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Originally CameraHalManager is created in the libcamera start up
and destroyed in the libcamera termination. However,
CameraHalManager destructor can access other static objects that
has been destroyed.
Avoid this issue by destroying CameraHalManager when tear_down() is
called in ChromeOS or leaking it in other platforms.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
On gcc versions older than 9, the file system library, used by the
Android camera HAL configuration file parser, is implemented in a
separate static library. Furthermore, on gcc 7, it's provided in the
std::experimental namespace. This breaks compilation of the HAL on gcc
7, and linking on gcc 8.
Fix the compilation issue by conditionally including
<experimental/filesystem> and creating a namespace alias in std, and the
link issue by linking to libstdc++fs on gcc versions older than 9.
The inclusion of <experimental/filesystem> is a bit of a hack, and when
we'll start using the file system library in another compilation unit,
we should then move all this to an internal helper to abstract the
compiler version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The <filesystem> header isn't needed in camera_hal_config.h, move its
inclusion to camera_hal_config.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add utility functions to CameraMetadata to check if it has been resized,
and for outputting the actual entry and data count. This is meant to be
used to output information on resizing, to assist developers in
choosing proper initial sizes to avoid resizing. Also make CameraDevice
use these functions for static and result metadata.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Add camera HAL configuration file for IPU3 Soraka.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Open the HAL configuration file in the Camera HAL manager and get
the camera properties for each created CameraDevice and initialize it
with them.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Add a CameraHalConfig class to the Android Camera3 HAL layer.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The HAL layer was getting the min and max frame durations from the
camera, then rounding it to fps to report as available fps ranges. The
same min and max frame durations were then being reported as min and max
frame durations. Since the fps are integer values while the frame
durations are in ns, this caused a rounding error making it seem like we
were reporting an available max fps that was higher than what was
allowed by the minimum frame duration.
An example is if the minimum frame duration is reported as 33366700ns.
The HAL layer would then convert it to fps, which is 29.97, but it would
be rounded and reported as 30 fps. When 30 fps is converted to a frame
duration it is 33333333ns, which is less than the minimum frame duration
that we report. Thus the minimum frame duration that we report
contradicts the fps range that we report.
Fix this by recalculating the frame durations based on the rounded fps
values.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.SurfaceViewPreviewTest#testPreviewFpsRange
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When stopping the camera worker, queuedRequest() calls may have queued
asynchronous function invocation messages to the worker thread, and some
of those messages may not have been processed yet. The messages will
stay in the thread's queue until the camera worker is restarted (when
the camera service will start a new capture session). At that point,
they will be dispatched, which will cause a crash due to the
CaptureRequest passed to processRequest() having been deleted by
CameraDevice::stop() calling descriptors_.clear().
Fix this by forcing dispatching of all function invocation messages when
stopping the camera worker thread. Note that this is inherently racy, as
more queueRequest() calls may arrive from the camera service while we're
stopping. This race condition will be addressed by a subsequent patch
series.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraMetadata::updateEntry() functions cast the data pointer to a
void pointer, which is then used internally to call
update_camera_metadata_entry(). If the caller passes a pointer to an
incorrect data type, the behaviour is undefined, with possible crashes
if the incorrect data type is smaller than expected by the Android
metadata library.
To avoid crashes, make all public updateEntry() functions take typed
pointers, and pass the element size to the internal function. The
element size is then checked against the expected size, and an error
message logged if they don't match. This won't catch incorrect data
types that have the same size as the correct type, but will at least
avoid potential crashes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The resize() function and the addEntry() override that takes a void
pointer are not meant to be called by the user of the CameraMetadata
class. Make them private.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The addEntry() and updateEntry() overrides that take a reference to a
container don't need to modify the container. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The sizeofT argument to CameraMetadata::addEntry() stores the size of
one element. Its name is a bit cryptic as the function isn't a template
function with a typename T. Rename it to elementSize.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
