| Age | Commit message (Collapse) | Author |
|---|
|
Use the newly introduced Camera3StreamConfig to associate the
Android requested streams with the associated StreamConfiguration
in a vector of configurations.
This change prepares to sort the vector of configuration before using
it to configure the Camera and populate the streams_ vector.
No functional changes intended.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Camera3StreamConfig is a new class to store camera3_stream and
types with associated StreamConfiguration.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Android camera device HAL3 specification does not require a
camera to go through any explicit close() call between configurations.
It is legitimate for a camera to be configured, a number of requests
processed and then re-configured again without any explicit stop.
The libcamera Android camera HAL starts the Camera at the first handled
request, and only stops it at camera close time. This means that two
camera configuration attempts in the same streaming session are only
interleaved by capture requests handling.
The libcamera::Camera state machine requires the Camera to be stopped
before any configuration take place, and this currently doesn't happen.
Fix this by stopping the camera and the associated worker thread if
a configuration attempt is performed while the Camera is in running
state.
This patch fixes cros_camera_test:
Camera3PreviewTest/Camera3SinglePreviewTest.Camera3BasicPreviewTest/0
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Initialize pixel array properties in the Android camera HAL
inspecting the camera properties.
If the camera does not provide any suitable property, not static
metadata is registered to the Android framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make sure the 'camera3_capture_request_t *' provided to
CameraDevice::processCaptureRequest() is valid before attempting to
access it.
This patch fixes cros_camera_test:
Camera3FrameTest/Camera3InvalidRequestTest.NullOrUnconfiguredRequest/*
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraDevice::getStaticMetadata() function populates the
entries for Android's static metadata by walking the ControlInfo
supported values reported by the libcamera pipeline.
The number of entries to be passed to Android is computed using the
vector's size which is initialized at vector creation time to the
maximum number of available entries.
In order to report the correct number of metadata do not create the
vector with the largest possible number of elements but only reserve
space for them using std::vector::reserve() which does not modify the
vector's size.
This patch fixes cros_camera_test:
Camera3DeviceTest/Camera3DeviceDefaultSettings.ConstructDefaultSettings/1
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
CameraDevice::toPixelFormat() doesn't change the state of the
CameraDevice. Marks it a const function so that it can be called
in const functions.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
std::map::at() searches std::map by the given key. The commit
e1f9fdb8a5bd ("android: camera_device: Remove shadowing FrameBuffer
usage") uses it with 0 to intend to accessing the first element of the
map, but actually access the element whose key is nullptr. This causes
the crash because the map doesn't have the element with nullptr. This
fixes the issue by replacing the std::map::at() operation by
std::map::begin().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Updated commit message]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Register the ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Add one entry and reserve in static metadata pack enough space to
support all the 2 available lens shading map modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 3
available color correction aberration modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 5
available noise reduction modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_REQUEST_PIPELINE_MAX_DEPTH static property
inspecting the value reported by the pipeline handler.
If the Camera does not report any suitable value, default the
static property to 2.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A FrameBuffer *buffer is used to obtain the 'first' buffer from a
request which is used purely to identify the timestamp from the
metadata in two locations.
Rather than keep the FrameBuffer instance around, which then causes
further usages of FrameBuffers to be shadowed, store the timestamp
locally.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the postfixed '_' member variable naming style for the
Camera3RequestDescriptor structure, which in turn ensures that variable
shadowing does not occur in the member initializer list of the
constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DECLARE_CATEGORY and
LOG_DEFINE_CATEGORY are unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg.
This encapsulates the encoder and EXIF generation code into the
PostProcessorJpeg layer and removes these specifics related to JPEG,
from the CameraStream itself.
Signed-off-by: Umang Jain <email@uajain.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
|
|
Add a CameraWorker class member to the CameraDevice class and
queue capture requests to it to delegate its handling. Start and
stop the CameraWorker when the libcamera::Camera is started or
stopped.
Tie the CaptureRequest lifetime to the Camera3RequestDescriptor's one
by storing it as unique_ptr<> in the descriptor to simplify handling
of request creation and deletion.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow reuse of the Request object by implementing reuse(). This means
the applications now have the responsibility of freeing the Request
objects, so make all libcamera users (cam, qcam, v4l2-compat, gstreamer,
android) do so.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When the CameraDevice is stopped, we need to clear the vector
of CameraStream instances to make sure they get deleted and all the
resources they have acquired get released.
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To ease following how Android streams get mapped to libcamera ones
add a (quite verbose) printout before queueing a request to libcamera.
The output looks like:
0 - (320x240)[0x00000022] -> (320x240)[NV12] (direct)
1 - (640x480)[0x00000021] -> (640x480)[NV12] (internal)
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that CameraStream that require internal memory allocation
have been instrumented with a FrameBuffer pool, use them to create
intermediate buffers in the CameraDevice.
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a FrameBufferAllocator class member to the CameraStream class.
The allocator is constructed for CameraStream instances that needs
internal allocation and automatically deleted.
Allocate FrameBuffers using the allocator_ class member in the
CameraStream class at CameraStream::configure() time and add two
methods to the CameraStream class to get and put FrameBuffer pointers
from the pool of allocated buffers. As buffer allocation can take place
only after the Camera has been configured, move the CameraStream
configuration loop in the CameraDevice class after camera_->configure()
call.
The newly created pool will be used to provide buffers to CameraStream
that need to provide memory to libcamera where to deliver frames.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Loop over the CameraStream instances and use their interface to perform
CameraStream configuration.
Modify CameraStream::configure() to configure the android stream buffer
count and to retrieve the StreamConfiguration by index instead of
receiving it as a parameter.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fetch the format and size of the libcamera::StreamConfiguration
associated with a CameraStream by accessing the configuration by
index.
This removes the need to store the libcamera stream format and sizes
as class members and avoid duplicating information that might get out
of sync.
It also allows to remove the StreamConfiguration from the constructor
parameters list, as it can be identified by its index. While at it,
re-order the constructor parameters order.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
It's a common pattern to access the libcamera::Stream and
libcamera::StreamConfiguration using the CameraStream instance's
index.
Add two methods to the CameraStream to shorten access to the
two fields. This allows removing the index() method from the class
interface.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Move the JPEG processing procedure to the individual CameraStream
by augmenting the class with a CameraStream::process() method.
This allows removing the CameraStream::encoder() method.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass the android camera3_stream_t, and a libcamera::StreamConfiguration
to identify the source and destination parameters of this stream.
Pass a CameraDevice pointer to the CameraStream constructor to allow
retrieval of the StreamConfiguration associated with the CameraStream.
Also change the format on which the CameraDevice performs checks to
decide if post-processing is required, as the libcamera facing format is
not meaningful anymore, but the Android requested format should be used
instead.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Delegate the construction of the encoder to the CameraStream class
for streams that need post-processing.
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define the CameraStream::Type enumeration and assign it to
each CameraStream instance at construction time.
The CameraStream type will be used to decide if memory needs to be
allocated on its behalf or if the stream is backed by memory externally
allocated by the Android framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Break CameraStream out of the CameraDevice class.
No functional changes, only the code is moved.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
With the buffer copy removed from all pipelines for raw capture
rename StillCaptureRaw to Raw to better describe the role.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Complete the transformation of CameraStream into a class and provide
a read-only interface that allows to access its parameters but not
modify them at run-time.
No functional changes intended but this change aims to make the code
more robust by enforcing a stricter interface in the CameraStream class.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make the CameraStream encoder a private unique pointer and require its
initialization at construction time. This ties the encoder lifetime to
the CameraStream it has been created with, allowing to remove the
CameraStream destructor.
This change dis-allow creating a CameraStream and set the Encoder later,
which shall not happen now that we create CameraStream once we have all
the required information in place.
No functional changes intended but this change aims to make the code
more robust enforcing a stricter CameraStream interface.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraDevice::streams_ vector of CameraStream instances is
currently mostly accessed by index. The current implementation
creates all the CameraStream during the first loop that inspects the
camera3_stream instances and then update the index of the
StreamConfiguration associated with the CameraStream during a second
loop that inspects MJPEG streams. A third loop creates the JPEG encoder
associated with camera streams that produce MJPEG format.
As the index-based association is hard to follow and rather fragile,
rework the creation and handling of CameraStream:
1) Make the StreamConfiguration index a constructor parameter and a
private struct member. This disallows the creation of CameraStream
without a StreamConfiguration index assigned.
2) Create CameraStream only after the associated StreamConfiguration
has been identified. The first loop creates CameraStream for non-JPEG
streams, the second for the JPEG ones after having identified the
associated StreamConfiguration. Since we have just created the
CameraStream, create the JPEG encoder at the same time instead of
deferring it.
This change removes all accesses by index to the CameraDevice::streams_
vector.
No functional changes intended, but this change aims to make the code
easier to follow and more robust.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When iterating the camera3_stream_t received from the Android camera
framework to identify the MJPEG streams, the format check was performed
on the CameraStream created when iterating the non-MJPEG streams and not
on the format actually requested by Android. As the next patches will
remove the creation of CameraStream instances for MJPEG streams, use the
camera3_stream format to prepare for that.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the size() method of the CameraConfiguration class to retrieve the
index of the StreamConfiguration associated with a CameraStream and get
rid of the custom counter.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The resolutions supported for the RAW formats cannot be tested from
a list of known sizes like the processed ones. This is mainly due to the
fact RAW streams are produced by capturing frames at the CSI-2 receiver
output and their size corresponds to the sensor's native sizes.
In order to obtain the RAW frame size generate a temporary
CameraConfiguration for the Role::StillCaptureRAW role and inspect the
map of StreamFormats returned by the pipeline handler.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
As the RAW stream sizes needs to be calculated differently from the
processed one, break out the procedure to calculate the processed
(RGB/YUV) resolutions from initializeStreamConfigurations() in order to
prepare for RAW sizes calculation.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add debug printouts to the CameraDevice::initializeStreamConfigurations()
function that help to follow the process of building the stream
configurations map.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When producing the list of image resolutions to claim as supported by the
camera HAL, the JPEG stream was assumed to be 'always valid' as, at the
time, there was no JPEG support in place at all.
With the introduction of support for JPEG compression, reporting
non-valid sizes as supported obviously causes troubles.
In order to avoid reporting non-supported resolutions as supported,
produce the list of available JPEG sizes by using the ones supported
by the YCbCr_420_888 format, from which the JPEG stream is encoded.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current implementation of CameraDevice::initializeStreamConfigurations()
fails if an image format marked as mandatory is not supported by the
libcamera::Camera device, but erroneously accepts non-mandatory
non-supported formats in the list of accepted ones.
Fix this by ignoring non supported image formats which are not marked as
mandatory.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Create a Exif object with various metadata tags set, just before
the encoder starts to encode the frame. The object is passed
directly as libcamera::Span<> to make sure EXIF tags can be set
in a single place i.e. in CameraDevice and the encoder only has
the job to write the data in the final output.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Android's orientation metadata cannot have identical numerical
value to libcamera's rotation property. This is due to the fact
that libcamera's rotation property specifies the correction angle
in anticlockwise direction whereas Android's orientation metadata
specifies the value in clockwise direction. Fix that by computing
corresponding value for clockwise direction from libcamera's rotation
property.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Just a small spelling fix: s/re-allcoation/reallocation
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
We build libcamera with -Wno-unused-parameter and this doesn't cause
much issue internally. However, it prevents catching unused parameters
in inline functions defined in public headers. This can lead to
compilation warnings for applications compiled without
-Wno-unused-parameter.
To catch those issues, remove -Wno-unused-parameter and fix all the
related warnings with [[maybe_unused]].
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
CameraDevice needs to be wrapper into the std::shared_ptr instead
of std::unique_ptr to enable refcounting. The refcounting will help
us to support hotplug and hot-unplug CameraHalManager operations
in the subsequent commit.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Declare a using directive for the map of Stream to FrameBuffer. Update
all users of Request::buffers() to use the new usage directive.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
MJPEG streams must be created referencing a libcamera stream.
This stream may already be provided by the request configuration,
in which case the existing stream is utilised.
If no compatible stream is available to encode, a new stream is requested
from the libcamera configuration.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generate the ResultMetadata before performing JPEG compression so that
JPEG specific metadata can be added to the metadata when it has been
processed.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
