| Age | Commit message (Collapse) | Author |
|---|
|
requests"
Commit d165f7da34b8 ("android: camera_device: Configure one stream for
identical stream requests") introduced the ability to generate through
post-processing YUV streams of identical size and format.
However the change didn't fully take into account the situation
where only mapped streams are contained in the request submitted by
the camera service to the HAL. In this case the Request will be queued
with no buffers and refused by the Camera.
Even if this seems a corner case it causes a few CTS to fail, and more
problematically it triggers out-of-order completion of requests, causing
the camera service to abort.
ERROR Camera camera.cpp:1031 Request contains no buffers
ERROR HAL camera_device.cpp:1109 '\_SB_.PCI0.I2C2.CAM0': Out-of-order completion for request 0x00007a1f1800ccd0
ERROR cros_camera_service[15706:15711]: [camera_device_adapter.cc(744)] (15711) Notify(): Fatal device error; aborting the camera service
Revert the commit until a proper solution is implemented.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The problem is happening because we seem to add a CameraStream
associated buffer (depending on the CameraStream::Type) to the Request,
in CameraDevice::processCaptureRequest().
However, when the camera stops, all the current buffers are marked with
FrameMetadata::FrameCancelled and proceed to completion. But the buffer
associated with the CameraStream (that was previously added to the
request) has now been cleared out with a part of streams_.clear(), even
before the camera stop() has been invoked. Any access to those request
buffers after they have been cleared, will result in a crash.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is a possibility that an out-of-order completion of capture
request happens by calling process_capture_result() directly on error
paths. The framework expects that errors should be notified as soon as
possible, but the request completion order should remain intact.
An existing instance of this is abortRequest(), which sends the capture
results on flushing state, without considering order-of-completion.
Since we have a queue of Camera3RequestDescriptor tracking each
capture request placed by framework to libcamera HAL, we should be only
sending back capture results from a single location, by inspecting
the queue. As per the patch, this now happens in
CameraDevice::sendCaptureResults().
Each descriptor is now equipped with its own status to denote whether
the capture request is complete and ready to be send back to the
framework or needs to be waited upon. This ensures that the order of
completion is respected for the requests.
Since we are fixing out-of-order request completion in abortRequest(),
change the function to read from the Camera3RequestDescriptor directly,
instead of camera3_capture_request_t. The descriptor should have all the
information necessary to set the request buffers' state to error.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
abortRequest() and notifyError() do not modify any members of
CameraDevice hence, these functions can be const.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The descriptors_ map holds Camera3RequestDescriptor(s) which are
per-capture requests placed by the framework to libcamera HAL.
CameraDevice::requestComplete() looks for the descriptor for which the
camera request has been completed and removes it from the map.
Since the requests are placed in form of FIFO and the framework expects
the order of completion to be FIFO as well, this calls for a need of
a queue rather than a std::map.
This patch still keeps the same lifetime of Camera3RequestDescriptor as
before i.e. in the requestComplete(). Previously, a descriptor was
extracted from the map and its lifetime was bound to requestComplete().
The lifetime is kept the same by manually calling .pop_front() on the
queue. In the subsequent commit, this is likely to change with a
centralized location of dropping descriptors from the queue for request
completion.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use Camera3RequestDescriptor as cookie for the Capture Request.
The cookie is used to lookup descriptors map in
CameraDevice::requestComplete(). The map will be transformed to a
queue in subsequent commit.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Acquire fences for streams of type Mapped generated by
post-processing are not correctly handled and are currently
ignored by the camera HAL.
Fix this by adding CameraStream::waitFence(), executed before
starting the post-processing in CameraStream::process().
The change applies to all streams generated by post-processing (Mapped
and Internal) but currently acquire fences of Internal streams are
handled by the camera worker. Postpone that to post-processing time by
passing -1 to the Worker for Internal streams.
Also correct the release_fence handling for failed captures, as the
framework requires the release fences to be set to the acquire fence
value if the acquire fence has not been waited on.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Camera3RequestDescriptor containing the capture request is added to
the descriptors_ map after a call to CameraWorker::queueRequest(). This
is a race condition since CameraWorker::queueRequest() queues requests
to libcamera::Camera asynchronously. The requests may thus complete
before they get added to descriptors_, in which case requestComplete()
will fail to lookup the request in the map.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Returning a non-managed pointer can cause leaks. Use a unique_ptr<>
instead to avoid possible future issues.
The std::move() for the planes argument to the FrameBuffer constructor
is dropped as it's misleading. FrameBuffer has no constructor that takes
an rvalue reference to planes, so the vector was copied despite the
move. This only clarifies the intent, no functional change is
introduced.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
An Android HAL client may request multiple identical streams. It is
redundant that a native camera device produces a separate stream for
each of the identical requests. Configure the camera with a single
stream in that case. The other identical HAL streams will be produced by
the YUV post-processor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraStream creates PostProcessorYuv if the destination format
is NV12.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that libcamera correctly supports frame buffers with different
dmabuf for each plane, remove the assumption that a single dmabuf is
used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usually .cpp files are equipped with using namespace libcamera;
Hence, it is unnecessary mentioning the explicit namespace of
libcamera at certain places.
While at it, a small typo in a comment was noticed and fixed as
part of this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
CameraDevice::CreateFrameBuffer() fills the length of the buffer to
each FrameBuffer::Plane::length. It should rather be the length of
plane. This also changes CreateFrameBuffer() to fill offset of
FrameBuffer::Plane.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove leftover inclusions of the sys/mman header file.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Propagate the requested test pattern mode to libcamera::Camera
through libcamera::Request and also set the android metadata to
the test pattern mode contained by the complete Request.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, all UVC cameras are reported with CameraLocationExternal [1]
by libcamera-core since there is no universal information or standard,
to know the location of these cameras. However, in the libcamera HAL
layer, we can make an informed decision whether it's external or
internal, simply by checking its presence in the HAL configuration
file.
The CameraHalManager will now assign the numerical id of the camera
accordingly when initializing the CameraDevice, based on the camera
facing value set in the HAL config file.
[1] 76809320bb1a ("libcamera: pipeline: uvcvideo: Treat all UVC cameras
as external")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add skeletal still and manual request templates so that we can expand
them for FULL support.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 7532caa2c77b ("android: camera_device: Reset config_ if
Camera::configure() fails") reworked the configuration sequence to
ensure that the CameraConfiguration pointers gets reset when
configuration fails. This inadvertently causes a null pointer
dereference, as the CameraStream constructor accesses the camera
configuration through CameraDevice::cameraConfiguration() before the
internal config_ pointer is set.
Fix this by passing the configuration pointer explicitly to the
CameraStream constructor.
Fixes: 7532caa2c77b ("android: camera_device: Reset config_ if Camera::configure() fails")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
processCaptureRequest()
Add a check on processCaptureRequest() if a given capture
request contains a camera stream that has been configured.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The config_ pointer is reset in all error paths of the
CameraDevice::configureStreams() function, except when
Camera::configure() fails. Fix it by using a local unique pointer to
store the configuration until the end of the function, to avoid similar
issues in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the utils functionality to the libcamera/base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The camera_device.cpp has grown a little too much, and it has quickly
become hard to maintain. Break out the handling of the static
information collected at camera initialization time to a new
CameraCapabilities class.
Break out from the camera_device.cpp file all the functions related to:
- Initialization of supported stream configurations
- Initialization of static metadata
- Initialization of request templates
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
There were some CameraMetadata calls that were left in the old version.
Update them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
HAL_PIXEL_FORMAT_RAW_OPAQUE is requested only for
Zero-Shutter-Lag (ZSL). ZSL requires RAW and YUV reprocessing.
Since either of them is not supported by libcamera, supporting
RAW_OPAQUE format doesn't make sense. Drop the format from the
supported format list.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report to the Android camera stack the list of supported test
pattern modes constructed by inspecting the values reported
by libcamera through the controls::draft::TestPatternMode control.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the flush() camera operation in the CameraDevice class
and make it available to the camera framework by implementing the
operation wrapper in camera_ops.cpp.
Introduce a new camera state State::Flushing to handle concurrent
flush() and process_capture_request() calls.
As flush() can race with processCaptureRequest() protect it
by introducing a new State::Flushing state that
processCaptureRequest() inspects before queuing the Request to the
Camera. If flush() is in progress while processCaptureRequest() is
called, return the current Request immediately in error state. If
flush() has completed and a new call to processCaptureRequest() is
made just after, start the camera again before queuing the request.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the introduction of an additional mutex class member, the name of
the existing one is too generic.
Rename CameraDevice::mutex_ in CameraDevice::descriptorsMutex_ and use the
libcamera provided libcamera::Mutex type to align the style with the
rest of the code base.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Guard access to the camera state and the start/stop sequences
with a mutex.
Currently only stop() and the first call to processCaptureRequest()
start and stop the camera, and they're not meant to race with each
other. With the introduction of flush() the camera can be stopped
concurrently to a processCaptureRequest() call, hence access to the
camera state will need to be protected.
Prepare for that by guarding the existing paths with a mutex.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraDevice class uses std::scoped_lock<> to guard access to the
class' descriptors_ member.
std::scoped_lock<> provides a set of features that guarantees safety
when locking multiple mutexes in a critical section, while for single
locks happening in a scoped block it does not provides benefits compared
to the simplest std::unique_lock<> which libcamera provides the
MutexLocker type for.
Replace usage of std::scoped_lock<> with libcamera::MutexLocker to make
the implementation consistent with the rest of the code base.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraDevice class maintains the camera state in the 'running_'
boolean flag to check if the camera has to be started at the first
received process_capture_request() call which happens after the camera
had been stopped.
So far this was correct, as the operations that change the camera
could only start or stop the camera, so a simple boolean flag
was enough.
To prepare to handle the flush() operation that will introduce a new
'flushing' state, replace the simple plain boolean flag with an
enumeration of values that define the CameraState.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current implementation of CameraDevice::requestComplete() which
handles event notification and calls the framework capture result
callback does not handle error notification precisely enough.
In detail:
- Error notification is an asynchronous callback that has to be notified
to the framework as soon as an error condition is detected, and it
independent from the process_capture_result() callback
- Error notification requires the HAL to report the precise error cause,
by specifying the correct CAMERA3_MSG_ERROR_* error code.
The current implementation only notifies errors of type
CAMERA3_MSG_ERROR_REQUEST at the end of the procedure, before the
callback invocation.
Rework the procedure to:
- Notify CAMERA3_MSG_ERROR_DEVICE and perform library tear-down in case
a Fatal error is detected
- Notify CAMERA3_MSG_ERROR_REQUEST if the libcamera::Request::status is
different than RequestCompleted and immediately call
process_capture_result() with all buffers in error state.
- Notify the shutter event as soon as possible
- Notify CAMERA3_MSG_ERROR_RESULT in case the metadata cannot be
generated correctly and call process_capture_result() with the right
buffer state regardless of metadata availability.
- Notify CAMERA3_MSG_ERROR_BUFFER for buffers whose post-processing
failed
While at it, return the CameraStream buffer by calling
cameraStream->putBuffer() regardless of the post-processing result.
No regression detected when running CTS in LIMITED mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report ANDROID_SENSOR_FRAME_DURATION as an available result key for CTS
to read out the value of frame duration we set in
CameraDevice::getResultMetadata(). Failing to do so might fail the CTS
test:
- android.hardware.camera2.cts.CaptureRequestTest#testNoiseReductionModeControl
Fixes: 3beb1accac1d ("android: camera_device: Fix sensor frame duration")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The standard C library close() and lseek() functions require inclusion
of the unistd.h header. Include it explicitly where needed instead of
relying on indirect inclusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The sensor frame duration should be set by IPA. Get the information for
the result metadata from libcamera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
We need a separate control to report the nominal frame duration, but
it's also useful to report the min/max frame duration values that will
be used. Split the FrameDurations control into FrameDuration and
FrameDurationLimits respectively to support both of these.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add utility functions to CameraMetadata to check if it has been resized,
and for outputting the actual entry and data count. This is meant to be
used to output information on resizing, to assist developers in
choosing proper initial sizes to avoid resizing. Also make CameraDevice
use these functions for static and result metadata.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Open the HAL configuration file in the Camera HAL manager and get
the camera properties for each created CameraDevice and initialize it
with them.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The HAL layer was getting the min and max frame durations from the
camera, then rounding it to fps to report as available fps ranges. The
same min and max frame durations were then being reported as min and max
frame durations. Since the fps are integer values while the frame
durations are in ns, this caused a rounding error making it seem like we
were reporting an available max fps that was higher than what was
allowed by the minimum frame duration.
An example is if the minimum frame duration is reported as 33366700ns.
The HAL layer would then convert it to fps, which is 29.97, but it would
be rounded and reported as 30 fps. When 30 fps is converted to a frame
duration it is 33333333ns, which is less than the minimum frame duration
that we report. Thus the minimum frame duration that we report
contradicts the fps range that we report.
Fix this by recalculating the frame durations based on the rounded fps
values.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.SurfaceViewPreviewTest#testPreviewFpsRange
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that CameraMetadata supports more convenient functions, use those
instead.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously we had to manually declare the size of CameraMetadata on
allocation, and its count could not be changed after construction.
Change CameraMetadata's behavior so that the user can simply add or
update entries, and the CameraMetadata will auto-resize (double the
size) as necessary. Also remove everything involved with calculating
the initial size for any CameraMetadata instances.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix an error message typo s/static/result/.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Calculate the value of the ANDROID_SENSOR_INFO_PHYSICAL_SIZE property
multiplying the number of sensor's readable pixels with the pixel unit
cell size if provided by the Camera.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the controls::SensorTimestamp value to populate
ANDROID_SENSOR_TIMESTAMP result metadata.
The Camera is assumed to provide the control in the Request metadata.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
CameraDevice creates Camera3RequestDescriptor in
processCaptureRequest() and disallocates in requestComplete().
Camera3RequestDescriptor can never be destroyed if
requestComplete() is never called. This avoid the memory
leakage by storing them in map CameraRequestDescriptor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds CameraDevice::stop(), which cleans up the member
variables of CameraDevice. It is called in CameraDevice::close()
and CameraDevice::configureStreams().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera doesn't handle crop_rotate_scale_degrees. Therefore,
if it is requested, that is, crop_rotate_scale_degrees is not
CAMERA3_STREAM_ROTATION_0, the configuration should fail.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
|rotation| and |crop_rotate_scale_degrees| are important info of
a configuration. They should be logged.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
