| Age | Commit message (Collapse) | Author |
|---|
|
The type of elements of the capability vector that is set in the static
metadata must be uint8_t. The enum will not suffice, as it is int32_t.
Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A libcamera camera that supports the manual sensor capability also
satisfies all the requirements for the read sensor settings capability.
Set it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Print messages when some feature is missing that causes hardware level
FULL to not be supported.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
We have some stream resolution which can provide slightly better
frame duration than what we cap (i.e. 1/30 fps). The problem with
this is CTS complains if the camera goes faster during the test
than minFrameDuration reported for that resolution. For instance,
1080p minFrameDuration:
- Nautilus : 33282000ns
- Soraka : 33147000ns
Both are less than capped minFrameDuration 1/30 fps (33333333.33ns).
This patch considers this situation and doesn't cap the
minFrameDuration if the hardware can provide frame durations slightly
better. The tolerance considered is 1% only from the cap.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Limit the reported minumum frame duration to 30 FPS.
The reason to do is to bring the libcamra HAL in par with the Intel
HAL implementation on IPU3 platform, where 30FPS is the frame rate used
to perform quality tuning in the closed-source IPA module and has been
validated as the most efficient rate for the power/performace budget.
This change bring into the HAL a platform specific constraints, which
might be opportune for most platforms but should rather be configurable
by system integrators. Record that with a \todo entry.
Also record that, even if we report a lower frame rate, we currently
do not limit what the camera actually produce.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As reported by the CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES documentation
in the Android developer reference:
"For devices advertising any color filter arrangement other than NIR, or
devices not advertising color filter arrangement, this list will always
include (min, max) and (max, max) where min <= 15 and max = the maximum
output frame rate of the maximum YUV_420_888 output size."
Collect the higher FPS of the larger YUV stream and use it with the
minimum FPS rate the camera can produce to populate the
ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS and
ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS static metadata are
populated by looping on the streamConfigurations_ vector.
Unify them in a single loop to avoid repeating it.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a debug statement to print out the list of collected output stream
and their characteristics.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Register as preview streams only streams capable of producing at least
30 FPS.
This requirement comes from inspecting the existing HAL implementation
on Intel IPU3 platform and from inspecting the CTS RecordingTests
results.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While building the list of supported stream configurations also collect
the absolute max frame durations to be used to populate the sensor
maximum frame duration.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We currently hardcode 2560x1920@30FPS as the only stalling frame duration.
This is of course not correct, and all the required information to
properly populate the ANDROID_SCALER_AVAILABLE_STALL_DURATIONS static
metadata are available from initializeStaticMetadata().
Use the collected stalling durations and sizes to properly popoulate the
static property.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the per-configuration stream durations as collected during
initializeStreamConfigurations() to populate the
ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As we now collect the per-stream frame durations at
initializeStreamConfigurations() times, the Camera is now guaranteed to
support the controls::FrameDurationLimits control.
Remove the check for its presence when populating the
ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that building the list of supported stream configuration requires
applying a configuration to the Camera, re-initialize the camera
controls by applying a configuration generated for the Viewfinder stream
role before building the list of static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Collect the per-stream frame durations while building the list
of supported stream formats and resolutions.
In order to get an updated list of controls it is necessary to apply
to the Camera the configuration we're testing, which was so far only
validated.
The per-configuration durations will be used to populate the Android
ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS static metadata.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera Android Camera HAL generates camera configurations for the
StillCapture, Raw and ViewFinder stream roles. But there is only a check
if the configuration generation failed, for the StillCapture stream role.
This could lead to a NULL pointer dereference if a pipeline handler fails
to generate a default configuration for one of the other two stream roles.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Generation of thumbnail is not occuring currently because
ANDROID_JPEG_THUMBNAIL_SIZE is not set for request metadata passed
to PostProcessorJpeg::process(). The commit 1264628d3c92("android:
jpeg: Configure thumbnailer based on request metadata") introduced
the mechanism to retrieve the thumbanil size from request metadata,
however it didn't add the counterpart i.e. inserting the size in
the request metadata in request metadata template, at the first place.
The patch fixes this issue by setting ANDROID_JPEG_THUMBNAIL_SIZE in
the request metadata template populated by
CameraCapabilities::requestTemplatePreview(). The value for
ANDROID_JPEG_THUMBNAIL_SIZE is set to be the first non-zero size
reported by static metadata ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES.
Fixes: 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
CameraMetadata's constructor take in number of entries and number of
bytes to be allocated for those entries. However, CameraMetadata is
already capable of resizing its container on the fly, in case more
entries are added to it. Hence, the numbers passed in during the
construction acts as hint values for initialization.
Clarify this in CameraCapabilities::requestTemplatePreview() and
remove the \todo, as the arguments and the \todo gives the perspective
that we need to be quite accurate with the numbers of entries / bytes,
which is not the case.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Usually .cpp files are equipped with using namespace libcamera;
Hence, it is unnecessary mentioning the explicit namespace of
libcamera at certain places.
While at it, a small typo in a comment was noticed and fixed as
part of this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
If the camera devices does not support the MANUAL_SENSOR capabilities
there is no point in generating a request template for the Manual
capture use case.
This change fixes CTS tests
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceManualTemplate
android.hardware.camera2.cts.NativeCameraDeviceTest#testCameraDeviceCreateCaptureRequest
For devices that do not support MANUAL_SENSOR capabilities.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a MaxLatency control, and plumb it into the HAL accordingly.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=50
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add skeletal still and manual request templates so that we can expand
them for FULL support.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to be able to add additional characteristics/request/result keys
into the corresponding list in the static metadata based on libcamera
camera capabilities. We also need to be able to easily check if the
lists have specific keys, for populating templates and result metadata.
Turn the characteristics, requests, and results keys vectors into sets,
and move them to member variables to achieve this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add helpers for setting android metadata from libcamera controls.
There are two versions, for scalars and collections, both of which take
a default value to fill in the android control if the libcamera control
is not found. They both return the value that was set.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the infrastructure for checking and reporting capabilities. Use
these capabilities to determine the hardware level as well.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=55
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The validation of RAW stream support is performed in two different
places:
- At initializeStreamConfigurations() time, by verifying that the
libcamera format associated with HAL_PIXEL_FORMAT_BLOB is a Raw format
and ensuring the Camera successfully validates it
- As initializeStaticMetadata() time by generating a CameraConfiguration
for the Raw stream role and ensuring it is a Raw format with a 16 bit
depth
The first check is used to build the list of supported Raw stream
resolutions. The latter is used to register the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability.
As building the list of supported Raw streams doesn't serve any
purpose if the RAW capability is not registered, centralize the Raw
format support verification at initializeStreamConfigurations() time by
ensuring the supported format is a Raw one with a 16 bit depth.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The getYUVResolutions() and getRawResolutions() functions are called
from the initializeStreamConfigurations() function, which is called by
initialize().
Rationalize the function naming scheme by renaming the two functions to
initializeYUVResolutions() and initializeRawResolution().
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When building the list of supported YUV streams in getYUVResolutions()
the CameraConfiguration provided by the caller as first parameters is used.
As the CameraConfiguration will be later actually applied to the Camera,
avoid any possible overlap of the configuration parameters by using a
throw-away CameraConfiguration generated for the Viewfinder stream role
in getYUVResolutions().
It's also nicer to avoid having two functions with a similar purpose
such as getYUVResolutions() and getRawResolutions() with different
parameter lists, as the presence of a CameraConfiguration as first
parameter might be confusing to the reader.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The camera_device.cpp has grown a little too much, and it has quickly
become hard to maintain. Break out the handling of the static
information collected at camera initialization time to a new
CameraCapabilities class.
Break out from the camera_device.cpp file all the functions related to:
- Initialization of supported stream configurations
- Initialization of static metadata
- Initialization of request templates
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
