| Age | Commit message (Collapse) | Author |
|---|
|
Fix a typo in the pipelines option documentation.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
By default all pipeline handlers are built, regardless on whether these
are needed in the host architecture or not. It makes more sense to build
only the pipeline handlers that will be used for the given architecture.
Let's do that by default now, but still allow to build the other
pipeline handlers if needed, by using the `pipelines` meson option. For
example, on a x86-64 platform:
$ meson build
...
Configuration
Enabled pipelines : ipu3
uvcvideo
Enabled IPA modules : ipu3
...
$ meson build -Dpipelines="ipu3,raspberrypi,rkisp1" -Dtest=true
...
Configuration
Enabled pipelines : ipu3
raspberrypi
rkisp1
vimc
Enabled IPA modules : ipu3
raspberrypi
rkisp1
vimc
...
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a pipeline handler for the ISI capture interface found on
several versions of the i.MX8 SoC generation.
The pipeline handler supports capturing multiple streams from the same
camera in YUV, RGB or RAW formats. The number of streams is limited by
the number of ISI pipelines, and is currently hardcoded to 2 as the code
has been tested on the i.MX8MP only. Further development will make this
dynamic to support other SoCs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Compiling with tests adds a significant amount of build targets to the
meson build. However, tests are only of interest when a feature has been
implemented or for continuous integration.
Disable tests by default to reduce the computational resource requirements
and the duration of a complete libcamera built.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera Python bindings is still experimental and it relies on some
features in pybind11 that are not yet upstreamed, so a special branch has
to be downloaded as a subproject.
This conflicts with the build process used by most Linux distributions,
since there is expected that all the dependencies will be fulfilled by
-devel packages present in the build root.
To allow libcamera to be built by distros, let's disable the pycamera by
default. This can still be enabled with `meson build -Dpycamera=enabled`.
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add libcamera Python bindings. pybind11 is used to generate the C++ <->
Python layer.
We use pybind11 'smart_holder' version to avoid issues with private
destructors and shared_ptr. There is also an alternative solution here:
https://github.com/pybind/pybind11/pull/2067
Only a subset of libcamera classes are exposed. Implementing and testing
the wrapper classes is challenging, and as such only classes that I have
needed have been added so far.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There can be multiple IPAs per pipeline-handler or platform.
They can live in-tree or externally linked. It is up to the vendor
whether to use in-tree IPA for a platform or provide it externally.
In the case of IPAs being external, building in-tree IPAs might be
futile hence, provide a clear and explicit mechanism to choose whether
to build the in-tree IPA for the platform or not.
By default, all in-tree IPAs are built when a matching Pipeline handler
is also enabled.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a compliance tool to ease testing of cameras. In contrast to the
unit-tests under test/ that aims to test the internal components of
libcamera the compliance tool aims to test application use-cases and to
some extent the public API.
This change adds the boilerplate code of a simple framework for the
creation of tests. The tests aim both to demonstrate the tool and to
catch real problems. The tests added are:
- Test that if one queues exactly N requests to a camera exactly N
requests are eventually completed.
- Test that a configured camera can be started and stopped multiple
times in an attempt to exercise cleanup code paths otherwise not
often tested with 'cam' for example.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
Building the cam application isn't always desired, for instance in a
production environment that only needs the libcamera library. Add a
meson option to disable it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Introduce the CameraBuffer backend for the Chromium OS operating system
and the associated meson option.
The Chromium OS CameraBuffer implementation uses the
cros::CameraBufferManager class to perform mapping of 1 plane and multiplane
buffers and to retrieve size information.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Android Camera3 HAL implementation requires platform
specific extensions, such as the selection of the memory backend
to use and additional constraints depending on the target device.
Define a combo option to select which platform to target and
define the currently existing implementation as 'generic'.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement tracing infrastructure in libcamera. It takes .tp files, as
required by lttng, and generates a tracepoint header and C file, as lttng
requires. meson is updated accordingly to get it to compile with the
rest of libcamera. Update the documentation accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This way if the user enables the documentation and the dependencies are
missing the configure fails.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow disabling compilation of the Android HAL adaptation layer
automatically when a dependency is missing by turning the android option
into a feature. The default value is set to 'disabled' to match the
current behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add an option to control compilation of the qcam test application. The
default behavior is to compile qcam, no change in behavior without user
intervention.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
Add the Raspberry Pi pipeline handler and IPA as targets in the
meson build system.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This new pipeline handler aims at supporting any simple device without
requiring any device-specific code. Simple devices are currently defined
as a graph made of one or multiple camera sensors and a single video
node, with each sensor connected to the video node through a linear
pipeline.
The simple pipeline handler will automatically parse the media graph,
enumerate sensors, build supported stream configurations, and configure
the pipeline, without any device-specific knowledge. It doesn't support
configuration of any processing in the pipeline at the moment, but may
be extended to support simple processing such as format conversion or
scaling in the future.
The only device-specific information in the pipeline handler is the list
of supported drivers, required for device matching. We may be able to
remove this in the future by matching with the simple pipeline handler
as a last resort option, after all other pipeline handlers have been
tried.
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
Add a 'pipelines' project option that specifies which pipeline handlers
to compile in. The corresponding IPA modules are automatically selected.
The default is to compile all pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
This implements the GStreamer plugin interface and adds libcamerasrc
element feature to it. This is just enough to allow plugin
introspection.
gst-inspect-1.0 build/src/gstreamer/libgstlibcamera.so
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
libcamerasrc: libcamera Source
1 features:
GST_PLUGIN_PATH=$(pwd)/build/src/gstreamer gst-inspect-1.0 libcamerasrc
Factory Details:
Rank primary (256)
Long-name libcamera Source
Klass Source/Video
Description Linux Camera source using libcamera
Author Nicolas Dufresne <nicolas.dufresne@collabora.com
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename /home/nicolas/Sources/libcamera/build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
GObject
+----GInitiallyUnowned
+----GstObject
+----GstElement
+----GstLibcameraSrc
Pad Templates:
none
Element has no clocking capabilities.
Element has no URI handling capabilities.
Pads:
none
Element Properties:
name : The name of the object
flags: accès en lecture, accès en écriture, 0x2000
String. Default: "libcamerasrc0"
parent : The parent of the object
flags: accès en lecture, accès en écriture, 0x2000
Object of type "GstObject"
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Silence -Wunused-function warning for older GLib versions]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add libcamera V4L2 compatibility layer.
This initial implementation supports the minimal set of V4L2 operations,
which allows getting, setting, and enumerating formats, and streaming
frames from a video device. Some data about the wrapped V4L2 video
device are hardcoded.
Add a build option named 'v4l2' and adjust the build system to
selectively compile the V4L2 compatibility layer.
For now we match the V4L2 device node to a libcamera camera based on a
devnum that a pipeline handler may optionally map to a libcamera
camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The 'tests' option enables compilation of tests. On Gentoo and Chrome
OS, the corresponding package USE flag is named 'test'. Rename the
option to 'test' to bring it in line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add libcamera Android Camera HALv3 implementation.
The initial camera HAL implementation supports the LIMITED hardware
level and uses statically defined metadata and camera characteristics.
Add a build option named 'android' and adjust the build system to
selectively compile the Android camera HAL and link it against the
required Android libraries.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Re-order the project options and add documentation which will be
presented by 'meson configure'.
This produces the following extra information:
Project options:
Option Current Value Possible Values Description
------ ------------- --------------- -----------
documentation true [true, false] Generate the project documentation
tests true [true, false] Compile and include the tests
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It can be desirable to disable the compilation and processing of both
the test suite and documentation for use cases such as packaging to an
embedded target.
Provide a new meson_options.txt file to allow disabling either or both
of the tests and documentation components of libcamera.
These options can be provided at the initial configuration time, for
example:
meson build -Dtests=false -Ddocumentation=false
or by reconfiguring an existing build tree:
cd build
meson configure -Ddocumentation=false
meson configure -Dtests=false
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
