summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-07-23libcamera: formats: Remove ImageFormatsNiklas Söderlund
The ImageFormats helper class is not used anymore and can be removed. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-23libcamera: v4l2_subdevice: Replace ImageFormats with a mapNiklas Söderlund
Replace the V4L2Subdevice usage of the ImageFormats class with a std::map and the utils::map_keys() helper. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-17libcamera: pipeline: ipa: raspberrypi: Use dma heap allocs for LS tablesNaushir Patuck
Remove use of vcsm allocations and replace with dma heap allocations. The pipeline handler now passes the fd of the allocation over to the IPA instead of the raw pointer. Also use libcamera::FileDescriptor for fd lifetime management. This commit must be built alongside the accompanying BCM2835 ISP kernel driver changes at https://github.com/raspberrypi/linux/pull/3715. Otherwise a mismatch will cause undefined behavior. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-17include: linux: Add dma-buf.h and dma-heap.h UAPI headersNaushir Patuck
This commit adds the dmabuf UAPI headers from the mainline Linux kernel v5.6.19. They are required by the Raspberry Pi library for lens shading table allocations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-17libcamera: ipa_proxy: Allow stop() on a stopped IPALaurent Pinchart
To make error handling easier in callers, allow the stop() function to be called when the proxy is already stopped, or not started yet. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-17ipa: raspberrypi: Pass sensor config back from configure()Laurent Pinchart
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG frame action to send the sensor staggered write configuration to the pipeline handler when the IPA is configured. Replace this ad-hoc mechanism by passing the corresponding data back from the IPA to the pipeline handler through the configure() response. This allows synchronous handling of the response on the pipeline handler side. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17ipa: raspberrypi: Pass lens shading table through configure() functionLaurent Pinchart
The IPAInterface::configure() function now accepts custom configuration data. Use it to pass the lens shading table instead of using a custom IPA event. This will allow starting the IPA when starting the camera, instead of pre-starting it early in order to process the lens shading table allocation event. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17libcamera: ipa_interface: Add support for custom IPA data to configure()Laurent Pinchart
Add two new parameters, ipaConfig and result, to the IPAInterface::configure() function to allow pipeline handlers to pass custom data to their IPA, and receive data back. Wire this through the code base. The C API interface will be addressed separately, likely through automation of the C <-> C++ translation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-15libcamera: file: Add read/write supportLaurent Pinchart
Add basic support to read and write data from/to a file, along with retrieving and setting the current read/write position. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Provide in-place versions of the Size helpersLaurent Pinchart
Add alignDownTo(), alignUpTo(), boundTo() and expandTo() helper functions to the Size class. These are in-place versions of the existing alignedDownTo(), alignedUpTo(), boundedTo() and expandedTo() functions. The new helpers return a reference to the size, to allow chaining the functions. One can thus write size.alignDownTo(16, 16).alignUpTo(32, 32) .boundTo({ 40, 80 }).expandTo({ 16, 80 }); instead of size.alignDownTo(16, 16); size.alignUpTo(32, 32); size.boundTo({ 40, 80 }); size.expandTo({ 16, 80 }); Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Make Size and Rectangle usable as constexprLaurent Pinchart
There are use cases for declaring constexpr Size and Rectangle instances. Make it possible. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Turn Size and Rectangle into classesLaurent Pinchart
SizeRange is defined as a class while Size and Rectangle are defined as struct. This is confusing for users in forward declarations. Simplify it by turning both structures into classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Give constructors to RectangleLaurent Pinchart
Rectangle, unlike Size, has no constructor, requiring the users to explicitly initialize the instances. This is error-prone, add constructors. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Define Rectangle after SizeLaurent Pinchart
A subsequent change to the Rectangle will require the definition of the Size to be available. Define Rectangle after Size to ease review of that change. No code change is included. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Add helper functions to the Size classLaurent Pinchart
Pipeline handlers commonly have to calculate the minimum or maximum of multiple sizes, or align a size's width and height. Add helper functions to the Size class to perform those tasks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-10libcamera: PixelFormatInfo: Add functions stride and frameSizePaul Elder
Add member functions to PixelFormatInfo for calculating stride and frame size. This will simplify existing code that calculates these things. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: StreamConfiguration: Add frameSize fieldPaul Elder
In addition to the stride field, we want the pipeline handler to be able to declare the frame size for the configuration. Add a frameSize field to StreamConfiguration for this purpose. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: PixelFormatInfo: Add v4l2 lookup functionPaul Elder
Add a lookup function for PixelFormatInfo that takes a V4L2PixelFormat. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: V4L2VideoDevice: Add tryFormatPaul Elder
Add tryFormat and its variations (meta, single-plane, multi-plane) to V4L2VideoDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: formats: Add fields to info to ease calculating stridePaul Elder
Packed formats make it difficult to calculate stride as well as frame size with the fields that PixelFormatInfo currently has. bitsPerPixel is defined as the average number of bits per pixel, and only counts effective bits, so it is not useful for calculating stride and frame size. To fix this, we introduce a concept of a "pixel group". The size of this group is defined as the minimum number of pixels (including padding) necessary in a row when the image has only one column of effective pixels. The pixel group has one more attribute, that is the "bytes per group". This determines how many bytes one pixel group consumes. These are the fields pixelsPerGroup and bytesPerGroup that are defined in this patch. Defining these two values makes it really simple to calculate bytes-per-line, as ceil(width / pixelsPerGroup) * bytesPerGroup, where width is measured in number of pixels. The ceiling accounts for padding. The pixel group has another contraint, which is that the pixel group (bytesPerGroup and pixelsPerGroup) is the smallest repeatable unit. What this means is that, for example, in the IPU3 formats, if there is only one column of effective pixels, it looks like it could be fit in 5 bytes with 3 padding pixels (for a total of 4 pixels over 5 bytes). However, this unit is not repeatable, as at the 7th group in the same row, the pattern is broken. Therefore, the pixel group for IPU3 formats must be 25 pixels over 32 bytes. Clearly, pixelsPerGroup must be constant for all planes in the format. The bytesPerGroup then, must be a per-plane attribute. There is one more field, verticalSubSampling, that is per-plane. This is simply a divider, to divide the number of rows of pixels by the sub-sampling value, to obtain the number of rows of pixels for the subsampled plane. For example, for something simple like BGR888, it is self-explanatory: the pixel group size is 1, and the bytes necessary is 3, and there is only one plane with no (= 1) vertical subsampling. For YUYV, the CbCr pair is shared between two pixels, so even if you have only one pixel, you would still need a padded second Y, therefore the pixel group size is 2, and bytes necessary is 4 (as opposed to 1 and 2). YUYV also has no vertical subsampling. NV12 has a pixel group size of 2 pixels, due to the CbCr plane. The bytes per group then, for both planes, is 2. The first plane has no vertical subsampling, but the second plane is subsampled by a factor of 2. The IPU3 formats are also self-explanatory, as they are single-planar, and have a pixel group size of 25, consuming 32 bytes. Although a comment in the driver suggests that it should be 50 and 64, respectively, this is an attribute of the driver, and not the format, so this shall be set by the ipu3 pipeline handler. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-09libcamera: utils: Add map_keys() functionLaurent Pinchart
Add a map_keys() function to the utils namespace to extract keys from a map. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Niklas: change return type to std::vector instead of std::set] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06libcamera: camera: Allow unspecified roles for generateConfigurationKieran Bingham
Providing an empty set of roles is permitted to generate an empty configuration from the pipeline handlers. Overload the generateConfiguration() function such that not specifying a roles parameter will use an empty set, and return an empty configuration. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-29libcamera: geometry: Add isNull() function to Size classLaurent Pinchart
It's common for code to check if a size is null. Add a helper function to do so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-25libcamera: ipa: raspberrypi: Plumb in the libcamera sharpness controlDavid Plowman
This simply wires up the libcamera sharpness control in the Raspberry Pi IPAs so that it controls the strength of the Raspberry Pi sharpness control algorithm. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: pixel_format: Replace hex with format namesKaaira Gupta
Print format names defined in formats namespace instead of the hex values in toString() as they are easier to comprehend. For this add a property of 'name' in PixelFormatInfo' so as to map the formats with their names. Print fourcc for formats which are not used in libcamera. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-18include: linux: Remove drm.h and drm_mode.hLaurent Pinchart
The drm.h and drm_mode.h headers are not used anymore, as drm_fourcc.h isn't included but only parsed by gen-formats.py. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18libcamera: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18libcamera: Define constants for pixel formats in the public APILaurent Pinchart
libcamera uses pixel format FourCC and modifier values from DRM. This requires inclusion of drm_fourcc.h, creating a dependency on a header that is packaged differently between distributions, and causing possible issues with third-party applications. Define constants for the supported pixel formats in the new formats.h public API header, in order to remove the dependency on drm_fourcc.h. The header is generated by a Python script from a list of supported formats. The numerical values for the FourCC and modifier are extracted from drm_fourcc.h by the script, ensuring that numerical values are not inadvertently modified and preserving the direct interoperability. The pixel formats constants can't be generated solely from drm_fourcc.h, as that header defines FourCC values and modifier values, but doesn't list the valid combinations. The supported formats are thus stored in a YAML file, which contains the FourCC and optional modifier for each supported format. We may later extend the YAML file to include formats documentation, and possibly formats metadata to populate the pixelFormatInfo map (in formats.cpp) automatically. Now that two formats.h header are present (one in include/libcamera/ and one in include/libcamera/internal/), we need to explicitly qualify the Doxygen \file directive with a path. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-06-17libcamera: camera_manager: Introduce signals when a camera is added or removedUmang Jain
Emit 'cameraAdded' and 'cameraRemoved' from CameraManager to enable hotplug and hot-unplug support in application like QCam. To avoid use-after-free race between the CameraManager and the application, emit the 'cameraRemoved' with the shared_ptr version of <Camera *>. This requires to change the function signature of CameraManager::removeCamera() API. Also, until now, CameraManager::Private::addCamera() transfers the entire ownership of camera shared_ptr to CameraManager using std::move(). This patch changes the signature of Private::addCamera to accept pass-by-value camera parameter. It is done to make it clear from the caller point of view that the pointer within the caller will still be valid after this function returns. With this change in, we can emit the camera pointer via 'cameraAdded' signal without hitting a segfault. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-17libcamera: device_enumerator: Emit a signal when new devices are addedUmang Jain
Emit a signal whenever new MediaDevices are added to the DeviceEnumerator. This will allow CameraManager to be notified about the new devices and it can re-emumerate all the devices currently present on the system. Device enumeration by the CameraManger is an expensive operation hence, we want one signal emission per 'x' milliseconds to notify multiple devices additions as a single batch, by the DeviceEnumerator. Add a \todo to investigate the support for that. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-09libcamera: Add missing SPDX headers to miscellaneous small filesLaurent Pinchart
Add missing SPDX headers to miscellaneous small files. Use CC0-1.0 for meson.build, .gitignore and the small include/linux/README, and licenses matching the corresponding component for other files. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-09libcamera: CameraManager, PipelineHandler: Automatically map devnums to CameraPaul Elder
The V4L2 compatibility layer uses devnum to match video device nodes to libcamera Cameras. Some pipeline handlers don't report a devnum for their camera, which prevents the V4L2 compatibility layer from matching video device nodes to these cameras. To fix this, we first allow the camera manager to map multiple devnums to a camera. Next, we walk the media device and entity list and tell the camera manager to map every one of these devnums that is a video capture node to the camera. Since we decided that all video capture nodes that belong to a camera can be opened via the V4L2 compatibility layer to map to that camera, it would cause confusion for users if some pipeline handlers decided that only specific device nodes would map to the camera. To prevent this confusion, remove the ability for pipeline handlers to declare their own devnum-to-camera mapping. The only pipeline handler that declares the devnum mapping is the UVC pipeline handler, so remove the devnum there. We considered walking the media entity list and taking the devnum from just the one with the default flag set, but we found that some drivers (eg. vimc) don't set this flag for any entity. Instead, we take all the video capture nodes (entities with the sink pad flag set). Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-08libcamera: IPAManager: remove instance() and make createIPA() staticPaul Elder
As the only usage of IPAManager::instance() is by the pipeline handlers to call IPAManager::createIPA(), remove the former and make the latter static. Update the pipeline handlers and tests accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-08libcamera: IPAManager: make IPAManager lifetime explicitly managedPaul Elder
If any ipa_context instances are destroyed after the IPAManager is destroyed, then a segfault will occur, since the modules have been unloaded by the IPAManager and the context function pointers have been freed. Fix this by making the lifetime of the IPAManager explicit, and make the CameraManager construct and deconstruct (automatically, via a unique pointer) the IPAManager. Also update the IPA interface test to do the construction and deconstruction of the IPAManager, as it does not use the CameraManager. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-06libcamera: pixel_format: Make PixelFormat usable as a constexprLaurent Pinchart
The PixelFormat class is a lightweight wrapper around a 32-bit FourCC and a 64-bit modifier. Make is usable as a constexpr. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-06libcamera: Rename header guards for internal headersLaurent Pinchart
With the internal headers now in include/libcamera/internal/, we may have identically named headers in include/libcamera/. Their header guards would clash. Rename the header guards of internal headers to prevent any issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-06libcamera: Replace C++ comments with C commentsLaurent Pinchart
The control_ids.h.in and property_ids.h.in headers use C++-style comments, when the coding style mandates C-style comments. Fix them. While at it, adjust three minor typos in comments. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-06libcamera: Rename pixelformats.{cpp,h} to pixel_format.{cpp,h}Laurent Pinchart
The libcamera source files are named after class names, using snake_case. pixelformats.h and pixelformats.cpp don't comply with that rule. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-05libcamera: Mark logPrefix() implementations with overrideLaurent Pinchart
Virtual functions overriden in derived classes should be marked with the override keyword. Do so for the logPrefix() implementations inheriting from the Loggable class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-02libcamera: Declare functions before variables in class definitionsLaurent Pinchart
The preferred coding style in libcamera is to declare private functions before private variables in class definitions. This rule isn't followed by some of the internal classes. Update them accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com>
2020-05-22libcamera: geometry: Set steps to 0 in default SizeRange constructorLaurent Pinchart
The default SizeRange constructor initializes the min and max members, but leaves the hStep and vStep members uninitialized. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-05-21include: linux: Update v4l2 ctrls for propertiesJacopo Mondi
The version of the v4l2-controls.h header file shipped by libcamera had deviated from the upstream one, as it included definitions for v4l2 controls that report camera properties, which were not accepted upstream at the time the header file was updated. Now that the controls definition has been accepted in the master branch of the linux-media kernel tree, update include/linux/v4l2-controls.h with the upstream-accepted definition of the control ids that describe camera properties. The control definition has been imported from the Linux kernel header files generated from the most recent linux-media master branch, at revision ad3a44cbd1b2e ("media: i2c: imx219: Parse and register properties") Instead of updating the whole header, just update the definition of V4L2 controls that describe camera properties. A full header update will be performed at a future Linux kernel release. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-19libcamera: file_descriptor: Implement move semantics for constructorLaurent Pinchart
The FileDescriptor class, when constructed from a numerical file descriptor, duplicates the file descriptor and takes ownership of the copy. The caller has to close the original file descriptor manually if needed. This is inefficient as the dup() and close() calls could be avoided, but can also lead to resource leakage, as recently shown by commit 353fc4c22322 ("libcamera: v4l2_videodevice: Fix dangling file descriptor"). In an attempt to solve this problem, implement move semantics for the FileDescriptor constructor. The constructor taking a numerical file descriptor is split in two variants: - A "fd copy" constructor that takes a const lvalue reference to a numerical file descriptor and duplicates it (corresponding to the current behaviour). - A "fd move" constructor that takes a rvalue reference to a numerical file descriptor and takes ownership of it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-05-18meson: Rename variables storing headers listsLaurent Pinchart
The list of public, IPA and internal header files are stored in three meson variables, named libcamera_api, libcamera_ipa_api and libcamera_headers respectively. The lack of uniformity is a bit confusing. Fix it by renaming those variables to libcamera_public_headers, libcamera_ipa_headers and libcamera_internal_headers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-05-16libcamera: Move IPA headers from include/ipa/ to include/libcamera/ipa/Laurent Pinchart
The IPA headers are installed into $prefix/include/libcamera/ipa/, but are located in the source tree in include/ipa/. This requires files within libcamera to include them with #include <ipa/foo.h> while a third party IPA would need to use #include <libcamera/ipa/foo.h> Not only is this inconsistent, it can create issues later if IPA headers need to include each other, as the first form of include directive wouldn't be valid once the headers are installed. Fix the problem by moving the IPA headers to include/libcamera/ipa/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move internal headers to include/libcamera/internal/Laurent Pinchart
The libcamera internal headers are located in src/libcamera/include/. The directory is added to the compiler headers search path with a meson include_directories() directive, and internal headers are included with (e.g. for the internal semaphore.h header) #include "semaphore.h" All was well, until libcxx decided to implement the C++20 synchronization library. The __threading_support header gained a #include <semaphore.h> to include the pthread's semaphore support. As include_directories() adds src/libcamera/include/ to the compiler search path with -I, the internal semaphore.h is included instead of the pthread version. Needless to say, the compiler isn't happy. Three options have been considered to fix this issue: - Use -iquote instead of -I. The -iquote option instructs gcc to only consider the header search path for headers included with the "" version. Meson unfortunately doesn't support this option. - Rename the internal semaphore.h header. This was deemed to be the beginning of a long whack-a-mole game, where namespace clashes with system libraries would appear over time (possibly dependent on particular system configurations) and would need to be constantly fixed. - Move the internal headers to another directory to create a unique namespace through path components. This causes lots of churn in all the existing source files through the all project. The first option would be best, but isn't available to us due to missing support in meson. Even if -iquote support was added, we would need to fix the problem before a new version of meson containing the required support would be released. The third option is thus the only practical solution available. Bite the bullet, and do it, moving headers to include/libcamera/internal/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-13licenses: License all meson files under CC0-1.0Laurent Pinchart
In an attempt to clarify the license terms of all files in the libcamera project, the build system files deserve particular attention. While they describe how the binaries are created, they are not themselves transformed into any part of binary distributions of the software, and thus don't influence the copyright on the binary packages. They are however subject to copyright, and thus influence the distribution terms of the source packages. Most of the meson.build files would not meet the threshold of originality criteria required for copyright protection. Some of the more complex meson.build files may be eligible for copyright protection. To avoid any ambiguity and uncertainty, state our intent to not assert copyrights on the build system files by putting them in the public domain with the CC0-1.0 license. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Show Liu <show.liu@linaro.org>
2020-05-12ipa: Drop v4l2_controls.h from ipa_interface.hLaurent Pinchart
The v4l2_controls.h header is internal, and isn't needed by ipa_interface.h. It originates from the days when V4L2 controls were handled through a different API. Drop it. Fixes: 319d6ae8e3ad ("libcamera: controls: Merge ControlInfoMap and V4L2ControlInfoMap") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-05-11libcamera: pipeline: Raspberry Pi pipeline handlerNaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) ISP pipeline handler. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-05-11include: uapi: Add header definitions for BCM2835 Unicam and ISP blocksNaushir Patuck
This commit adds the headers and definitions required for the bcm2835_isp and bcm2835_unicam kernel modules. The headers come from patches recently posted to the linux-media@vger.kernel.org mailing list to add the Unicam and ISP peripherals drivers to the kernel. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>