| Age | Commit message (Collapse) | Author |
|---|
|
Add a timer that gets reset on every buffer dequeue event. If the timeout
expires, optionally call a slot in the pipeline handler to handle this
condition. This may be useful in detecting and handling stalls in either the
hardware or device driver.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Some of the values were listed incorrectly. Specifically:
ExposureValue: the range is now centred correctly on zero
Brightness: the default value (0.0) is made explicit
Contrast: the default value is corrected to be 1.0
Saturation: the default value is corrected to be 1.0
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1)
that uses queueRequest() to pass in the request controls to
IPA.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Queuing of request (i.e. passing of controls to the IPA)
and filling of the parameters buffer are two separate operations.
Treat them as such by splitting them into two functions in
the rkisp1 IPA interface.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When streamOff() is called, ensure the cache entries for the remaining queued
buffers are freed since this will not happen via the dequeueBuffer() mechanism.
Additionally, add a V4L2BufferCache::isEmpty() function and assert that the
cache is empty at the end of the streamOff() call.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace the existing streaming_ state variable with an enum to track the
following three state: Streaming, Stopping, and Stopped. The alternate states
will be used in a subsequent commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The start(unsigned int msec) overload is error-prone, as the argument
unit can easily be mistaken in callers. Drop it and update all callers
to use the start(std::chrono::milliseconds) overload instead.
The callers now need to use std::chrono_literals. The using statement
could be added to timer.h for convenience, but "using" is discouraged in
header files to avoid namespace pollution. Update the callers instead,
and while at it, sort the "using" statements alphabetically in tests.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The IPARkISP1Interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of operations to dedicated functions:
ActionV4L2Set => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadata => metdataReady
EventSignalStatBuffer => processStatsBuffer()
EventQueueRequest => queueRequest()
The lexical of IPARkISP1::metadataReady() will now conflict with the
metadataReady Signal being introduced in this patch as part of the
interface change. Hence, rename IPARkISP1::metadataReady() to
IPARkISP1::prepareReady() to prevent the conflict.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add further members to the ipu3 ipa interface that will hold lens
controls passed in by configInfo
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a function to the CameraLens class to fetch the V4L2 controls
for its V4L2 subdev
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a function to check for and initialise any VCMs linked to the
CameraSensor's entity by ancillary links. This should initialise
the lens_ member with the linked entity. Call the new function
during CameraSensor::init().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the new media link type macro to the header so we can use it to
identify the new links. This isn't handled as a sync to the upstream
header because the macro is not yet upstream itself. The latest
series attempting to add it being found here:
https://lists.libcamera.org/pipermail/libcamera-devel/2022-March/029120.html
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With kernel support for ancillary links, we can describe the
relationship between two devices represented individually as instances
of MediaEntity. As the only property of that relationship is its
existence, describe those relationships in libcamera simply as a
vector of MediaEntity pointers to the ancillary devices.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraLens class implements a function named "setFocusPostion".
There is a typo here, fix it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide a call allowing requests to be registered and associated with
the pipeline handler after being constructed by the camera.
This provides an opportunity for the PipelineHandler to connect any
signals it may be interested in receiving for the request such as
getting notifications when the request is ready for processing when
using a fence.
While here, update the existing usage of the d pointer in
Camera::createRequest() to match the style of other functions.
Bug: https://github.com/raspberrypi/libcamera-apps/issues/217
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Updated kernel headers to v5.16-rc7 using
utils/update-kernel-headers.sh and re-instating libcamera
local modifications.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The PipelineHandler lock() and unlock() functions are documented as
thread-safe, but they're not. Fix them using a mutex.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The MediaDevice lock is meant to prevent concurrent usage of multiple
cameras from the same pipeline handlers. As media devices are acquired
by pipeline handlers, we can't have multiple pipeline handlers trying to
lock the same media device. The recursive locking detection can thus be
moved to the pipeline handler. This simplifies the media device
implementation that now implements true lock semantics, and prepares for
support of concurrent camera usage.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This function forces raw streams to have the "raw" color space, and
also optionally makes all non-raw output streams to share the same
color space as some platforms may require this.
When sharing color spaces we take the shared value to be the one from
the largest of these streams. This choice is ultimately arbitrary, but
can be appropriate if smaller output streams are used for image
analysis rather than human consumption, when the precise colours may
be less important.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds a ColorSpace field to the V4L2SubdeviceFormat so that we can
set and request particular color spaces from V4L2.
This commit simply adds the field and fixes some occurrences of brace
initializers that would otherwise be broken. A subsequent commit will
pass and retrieve the value correctly to/from V4l2 itself.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ColorSpace from the StreamConfiguration is now handled
appropriately in the V4L2VideoDevice.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add functions to the V4L2Device class to convert to and from
libcamera ColorSpace.
These functions are added to the base V4L2Device class so that they can
be shared both by the video device class and subdevices.
With the ColorSpace class, the color space and related other fields
are stored together, corresponding to a number of fields in the
various different V4L2 format structures. Template functions are
therefore a convenient implementation, and we must explicitly
instantiate the templates that will be needed.
Note that unset color spaces are converted to requests for the
device's "default" color space.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is so that applications can choose appropriate color spaces which
will then be passed down to the V4L2 devices.
The ColorSpace field is actually optional. If it is not set you will
get the camera's default color space.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This class represents a color space by defining its color primaries,
the transfer (gamma) function it uses, the YCbCr encoding and whether
the output is full or limited range.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a prepare() function to the Private Request representation.
The prepare() function is used by the PipelineHandler class to
prepare a Request to be queued to the hardware.
The current implementation of prepare() handles the fences associated
with the Framebuffers part of a Request. The function starts an event
notifier for each of those and emits the Request::prepared signal when
all fences have been signalled or an optional timeout has expired.
The optional timeout allows to interrupt blocked waits and notify the
Request as failed so that it can be cancelled.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since a queue of waiting Requests has been introduced, not all Requests
queued to the PipelineHandler are immediately queued to the device.
As a Camera can be stopped at any time, it is required to complete the
waiting requests after the ones queued to the device had been completed.
Introduce a pure virtual PipelineHandler::stopDevice() function to be
implemented by pipeline handlers and make the PipelineHandler::stop()
function call it before completing pending requests.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to prepare to handle synchronization fences at Request
queueing time, split the PipelineHandler::queueRequest() function in
two, by creating a list of waiting requests and introducing the
doQueueRequest() function that queues requests to the device in the
order the pipeline has received them.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an optional fence parameter to Request::addBuffer() to allow
associating a Fence with a FrameBuffer.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add to the FrameBuffer::Private class a unique pointer to a
Fence.
The Fence will be used to signal the availability of the Framebuffer for
incoming data transfer.
The Fence will be associated to a FrameBuffer at Request::addBuffer()
time, and if correctly signalled, reset by the core at Request queue
time.
If a FrameBuffer completes with errors, due to a Fence wait failure, the
Fence will still be owned by the FrameBuffer and it is application
responsibility to correctly reset it before reusing the buffer.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a Fence class which models a synchronization primitive that
allows to notify the availability of a resource.
The Fence is modeled as a wrapper of a UniqueFD instance where
read events are used to signal the Fence. The class can be later
extended to support additional signalling mechanisms.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement the D-Pointer design pattern in the Request class to allow
changing internal data without affecting the public ABI.
Move the internal fields that are not needed to implement the public
API to the Request::Private class already. This allows to remove
the friend class declaration for the PipelineHandler class, which can
now use the Request::Private API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Move all internal fields to Request::Private and remove friend declaration]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The abs_diff() function computes the absolute difference of two
elements. This may seem trivial at first, but can lead to unexpected
results when operating on unsigned operands. A common implementation
of the absolute difference of two unsigned int (used through the
libcamera code base) is
std::abs(static_cast<int>(a - b))
but doesn't return the expected result when either a or b is larger than
UINT_MAX / 2 due to overflows. The abs_diff() function offers a safe
alternative.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This adds a function to set a camera sensor driver a test pattern
mode. CameraSensor initializes the test pattern mode by Off.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraSensor stores TestPatternModes as an int32_t. This prevents
the compiler from verifying the usage against the defined enum types.
Fix references to the TestPatternMode to store the value as the
TestPatternModeEnum type which is defined by the control generator.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
We cannot have a subclass of FrameBuffer because it is marked as final.
This adds a FrameBuffer constructor with FrameBuffer::Private. So we
can attach some additional resources with FrameBuffer through a
customized FrameBuffer::Private class.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add == and != comparison operators between two SharedFD instances, and
use them to replace manuel get() calls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
For consistency with UniqueFD, rename the fd() function to get().
Renaming UniqueFD::get() to fd() would have been another option, but was
rejected to keep as close as possible to the std::shared_ptr<> and
std::unique_ptr<> APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2VideoDevice::open() function that takes an open file handle
duplicates it internally, and leaves the original handle untouched. This
is documented but not enforced through language constructs. Fix it by
passing a FileDescriptor to the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages file descriptors owned by V4L2VideoDevice by UniqueFD.
This also changes the return type of exportDmabufFd to UniqueFD
from FileDescriptor in order to represent a caller owns the
returned file file descriptor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages a file descriptor owned by V4L2Device for a v4l2 device node
by UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages a file descriptor owned by MediaDevice for a media device
node by UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages the file descriptors owned by Process for pipe by UniqueFDs.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPCUnixSocket::create() creates two file descriptors. One of
them is stored in IPCUnixSocket and the other is returned to a
caller. This clarifies the ownership using UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Manages the file descriptor owned by File by UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Manages the event file descriptor owned by EventDispatcherPoll
by UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The dup() function returns a duplicate of the file descriptor. Wrapping
it in a FileDescriptor isn't wrong as such, but it prevents from using
it in contexts where a UniqueFD is needed. As the duplicate is
guaranteed to have a single owner when created, return it as a UniqueFD
instead. A FileDescriptor can easily be created from the UniqueFD if
desired.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a FileDescriptor constructor that takes a UniqueFD, transfering
ownership of the file descriptor to the FileDescriptor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This introduces UniqueFD. It acts like unique_ptr to a file descriptor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The inode() function has always been a bit of an outcast in the
FileDescriptor class, as it's not related to the core feature provided
by FileDescriptor, a shared ownership wrapper around file descriptors.
As it's only used in the FrameBuffer implementation, move it to
frame_buffer.cpp as a static function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
