| Age | Commit message (Collapse) | Author |
|---|
|
The two pipeline handlers that currently support Transform (IPU3 and
RaspberryPi) implement it by operating H/V flips on the image sensor.
Centralize the code that validates a Transform request against the
sensor rotation capabilities in the CameraSensor class.
The implementation in the IPU3 pipeline handler was copied from the
RaspberryPi implementation, and is now centralized in CameraSensor to
make it easier for other platforms.
The CameraSensor::validateTransform() implementation comes directly from
the RaspberryPi pipeline handler, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
During the camera sensor driver validation, verify if the sensor
supports horizontal and vertical flips and store a flag as
CameraSensor::supportFlips_ class member.
The flag will be later inspected when applying flips.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
The strtod() function is locale-dependent, and thus ill-suited to parse
numbers coming from, for instance, YAML files. The YamlObject class uses
strtod_l() to fix that issue, but that function is not available with
all libc implementations. Correctly handling this problem is becoming
out of scope for the YamlObject class.
As a first step, add a strtod() helper function in the utils namespace
that copies the implementation from YamlObject, and use it in
YamlObject. The core issue will then be fixed in utils::strtod().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the simple converter implementation to a generic V4L2 M2M class
derived from the converter interface. This latter could be used by
other pipeline implementations and as base class for customized V4L2 M2M
converters.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Declare a converter Abstract Base Class intended to provide generic
interfaces to hardware offering size and format conversion services on
streams. This is mainly based on the public interfaces of the current
converter class implementation found in the simple pipeline handler.
The main change is the introduction of loadConfiguration() function
which can be used by the concrete implementation to load hardware
specific runtime parameters defined by the application.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to
the pipeline handler through the setDelayedControls signal. This cookie is used
to index the RPiController::Metadata object to be used for the frame.
The IPA cookie is then returned from DelayedControls when the frame with the
applied controls has been returned from the sensor, and eventually passed back
to the IPA from the signalIspPrepare signal.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Some UVC cameras have been identified that can provide V4L2 menu
controls without any menu items.
This leads to a segfault where we try to construct a
ControlInfo(Span<>,default) with an empty span.
Convert the v4l2ControlInfo and v4l2MenuControlInfo helper functions to
return std::optional<ControlInfo> to be able to account in the caller if
the control is valid, and only add acceptable controls to the supported
control list.
Menu controls without a list of menu items are no longer added as a
valid control and a warning is logged.
This also fixes a potential crash that would have occured in the
unlikely event that a ctrl.minimum was set to less than 0.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=167
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The StreamRole enum has enumerators such as 'Raw' that are too generic
to be in the global libcamera namespace. Turn it into a scoped enum to
avoid namespace clashes, and update users accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera prints stream role values in log messages. To be more
user-friendly, add a specialization of operator<<() to print the role
name as a string instead of a numerical value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Building libcamera as a subproject is failing when tracepoints are
enabled due to incorrectly managing the relative paths between the
source and build directory while generating tracepoint headers.
The previously used
path = output.replace('include/', '', 1)
logic is not sufficient to correctly determine the proper path when
libcamera is built as a subproject, and does not correctly handle the
relative paths, causing path to be processed as:
'subprojects/libcamera/include/libcamera/internal/tracepoints.h'.replace('include/', '', 1)
which evaluates to
'subprojects/libcamera/libcamera/internal/tracepoints.h'
so the tracepoints.h header file will try to include:
#define TRACEPOINT_INCLUDE "subprojects/libcamera/libcamera/internal/tracepoints.h"
which will fail.
Fix it by using Python's pathlib to calculate the relative path of the
output file with respect to the "include" directory of libcamera.
This has been tested with Pipewire. For non-subproject builds it should
generate the exact same path that was previously generated.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Kieran: Commit message expanded/reworded]
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, the Android HAL does not work on rkisp1-based devices because
required FrameDurationLimits metadata is missing from the IPA
implementation.
This change sets FrameDurationLimits for rkisp1 based on the existing
ipu3 implementation, using the sensor's reported range of vertical
blanking intervals with the minimum reported horizontal blanking
interval.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The RkISP1 implementation of IPA::configure() still uses the legacy
interface where sensor controls (and eventually lens controls) are
passed from the pipeline handler to the IPA in a map.
Since the introduction of mojom-based IPA interface definition, it is
possible to define custom data types and use them in the interface
definition between the pipeline handler and the IPA.
Align the RkISP1 IPA::configure() implementation with the one in the
IPU3 IPA module by using a custom data type instead of relying on a map
to pass controls to the IPA.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The BufferMask enum provides a way of identifying which stream a frame buffer
belongs to. This enum is defined in the raspberrypi.mojom interface file.
However, the IPA does not need these enum definitions to mmap buffers that it
uses.
Move this enum out of the raspberrypi.mojom interface file and put it into
the RPi namespace visible only to the pipeline handler. This removes the
need to include the auto-generated IPA interface header in the RPi::Stream
definition.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This notifies pipeline handlers when a camera is released, in case
they want to free any resources or memory buffers.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This annotates member functions and variables of Semaphore by
clang thread safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The PipelineHandler::generateConfiguration() function allocates a
CameraConfiguration instance and returns it. The ownership of the
instance is transferred to the caller. This is a perfect match for a
std::unique_ptr<>, which the Camera::generateConfiguration() function
already returns. Update PipelineHandler::generateConfiguration() to
match it. This fixes a memory leak in one of the error return paths in
the IPU3 pipeline handler.
While at it, update the Camera::generateConfiguration() function
documentation to drop the sentence that describes the ownership
transfer, as that is implied by usage of std::unique_ptr<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Each declaration of a LogCategory will create a new LogCategory, and
will be stored in an unordered_set Logger::categories_. This means that
when a plugin .so is unloaded and loaded, as happens when destructing
and creating a CamereManager, we'll get duplicate categories.
The Logger::registerCategory docs say "Log categories must have unique
names. If a category with the same name already exists this function
performs no operation.". The code does not comply with this.
We solve the issue with two changes:
Change the unordered_set to a vector for simplicity, as there's no need
for an unordered_set.
Instead of using the LogCategory constructor to create new categories in
_LOG_CATEGORY() macro, use a factory method. The factory method will
return either an existing LogCategory if one exists with the given name,
or a newly created one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
LogCategory just stores the char * that was given to it in the
constructor, i.e. it refers to memory "outside" LogCategory. If the
LogCategory is defined in a .so that is unloaded, then it leads to the
LogCategory pointing to freed memory, causing a crash.
Fix this by taking a copy of the name by using a std::string instead of
just storing the pointer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The overloaded deserializers functions that called the main deserializer
function using iterators used cbegin() but end() instead of cend(). Make
all of these use cend() instead.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Currently, enums that are passed between pipeline handlers and their IPA
must be defined in a mojom file. However, there is a use case for
enum/flags to be defined in a C++ header, such that the enum can be used
in a component other than the pipeline handler and its IPA.
To support this, add support for the skipHeader attribute for enums.
Like structs, it is only allowed in core.mojom.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing Flags in function
parameters, add an enum class TestFlags and Flags<TestFlags> to some
function parameters, both for input and output and Signals.
While at it, update the ipa_interface_test.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing enums in function
parameters, add IPAOperationCode to the parameter list of init().
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Flags<E> as a supported type in the IPA interface.
It is used in mojom with the [flags] attribute. Any field or parameter
type E that is prefixed with the [flags] attribute will direct the code
generator to generate the type name "Flags<E>" and appropriate
serialization/deserialization code for Flags<E> instead of for E.
It is usable and has been tested in struct members, function input and
output parameters, and Signal parameters. This does not add support for
returning Flags as direct return values.
Additionally, the [scopedEnum] attribute can be used on enum
definitions, which will instruct the code generator to convert it to an
enum class instead of a raw enum.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement an IPADataSerializer for Flags.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update CamHelper::getDelays() to return the sensor HBLANK delay. The
HBLANK delay is set to the same value as VBLANK delay for all sensors in
the Raspberry Pi IPA.
Return the HBLANK gain delay from the IPA to the pipeline handler, and
initialise DelayedControls to handle V4L2_CID_HBLANK with this delay
value.
As a drive-by, check that the V4L2_CID_HBLANK control is available when
calling IPARPi::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length (in units of pixels) to
the IPACameraSensorInfo structure. This replaces the existing lineLength
field.
Update the ipu3, raspberrypi and rkisp1 IPAs to use
IPACameraSensorInfo::minLineLength instead of
IPACameraSensorInfo::lineLength, as logically we will always want to use
the fastest sensor readout by default.
Since the IPAs now use minLineLength for their calculations, set the
starting value of the V4L2_CID_HBLANK control to its minimum in
CameraSensor::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Private members of the FrameBuffer class are split between FrameBuffer
and FrameBuffer::Private. There was no real justification for this
split, and keeping some members private in the FrameBuffer class causes
multiple issues:
- Future modifications of the FrameBuffer class without breaking the ABI
may be more difficult.
- Mutable access to members that should not be modified by applications
require a friend statement, or going through the Private class.
Move all remaining private members to the Private class to address the
first issue, and add a Private::metadata() function to address the
second problem.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
utils::defopt causes compilation issues on gcc 8.0.0 to gcc 8.3.0,
likely due to bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86521
that was fixed in gcc 8.4.0. gcc 8.3.0 may be considered old (libcamera
requires gcc-8 or newer), but it is shipped by Debian 10 that has LTS
support until mid-2024.
As no workaround has been found to fix compilation on gcc 8.3.0 while
still retaining the functionality of utils::defopt, remove it from the
libcamera base library. This change could be reverted once support for
gcc-8 will be dropped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ControlList::set() function overload used for array controls
constructs a Span from an initializer list. It doesn't specify the Span
size explicitly, which results in a dynamic extent Span being
constructed. That causes a compilation failure for fixed-size array
controls, as they are defined as Control<T> with T being a fixed-extent
Span, and conversion from a dynamic-extent to fixed-extent Span when
calling ControlValue::set() can't be implicit.
Fix this by constructing the Span using the size of the control, which
resolves to a fixed-extent and dynamic-extent Span for fixed-size and
dynamic-size array controls respectively. The ControlList::set()
function that takes an initializer list can then be used for fixed-size
array controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The REGISTER_PIPELINE_HANDLER() macro defines a class type that inherits
from the PipelineHandlerFactory class, and implements a constructor and
a createInstance() function. Replace the code generation through macro
with the C++ equivalent, a class template, as done in libipa with the
Algorithm and CameraSensorHelper factories.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Avoid naked pointer with memory allocation by returning a unique_ptr
from PipelineHandlerFactory::createInstance(), in order to increase
memory allocation safety.
This allows iterating over factories in the CameraManager and unit tests
using const pointers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The PipelineHandlerFactory::registerType() function is called by the
PipelineHandlerFactory class only. Make it private.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The PipelineHandlerFactory::create() function has no need to modify the
factory instance. Make it const, as well as the createInstance()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraManager::get() function takes a string containing the ID of
the requested camera. This is correctly documented and implemented in
the .cpp file, but the header file names the parameter 'name' instead of
'id'. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Most headers imported from Android have an SPDX tag (added manually in
commit 190bebef0840), but four headers that have been imported more
recently are missing license identifiers. Fix them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The default ControlInfo constructor allows partially initialising the
min/max/def values. Uninitialised values are assigned to 0 by default.
This implicit initialisation makes it impossible to distinguish between
an uninitialised and an explicitly 0-initialised ControlValue.
Default construct the ControlValue in the ControlInfo default contructor to
explicitly represent uninitialised values by the ControlTypeNone type.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The min/max/def ControlValue of a ControlInfo can take arbitrary types that
are different from each other and different from the ControlId type.
The serialiser serialises these ControlValue separately by their type but
does not store the type. The deserialiser assumes that ControlValue types
match the ControlId type. If this is not the case, deserialisation will try
to deserialise values of the wrong type.
Fix this by serialising each of the min/max/def ControlValue's ControlType
and storing it just before the serialised ControlValue.
Fixes: https://bugs.libcamera.org/show_bug.cgi?id=137
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on
pixel format") has introduced a warning when trying to convert a color
space from V4L2 to libcamera if the media bus code is unknown. This was
meant to catch unknown image formats, but turned out to be also
triggered for metadata formats.
Color spaces are not applicable to metadata formats, there should thus
be no warning. Fix it by skipping the color space translation and
returning std::nullopt directly if the kernel reports
V4L2_COLORSPACE_DEFAULT. This doesn't introduce any change in behaviour
other than getting rid of the warning, as the V4L2Device::toColorSpace()
function returns std::nullopt already in that case.
Fixes: e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on pixel format")
Reported-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The CameraConfiguration::validateColorSpaces() function performs color
space validation on a camera configuration, by validating the color
space of each stream individually, and optionally ensuring that all
streams share the same color space. The individual validation is very
basic, limited to ensuring that raw formats use a raw color space.
Color spaces are more constrained than that:
- The Y'CbCr encoding and quantization range for RGB formats must be
YcbcrEncoding::None and Range::Full respectively.
- The Y'CbCr encoding for YUV formats must not be YcbcrEncoding::None.
Instead of open-coding these constraints in the validateColorSpaces()
function, create a new ColorSpace::adjust() function to centralize color
space validation and adjustment, and use it in validateColorSpaces().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Wrap V4L2Device::toColorspace() inside a private static member
function in V4L2VideoDevice class. It improves readability in
setting the colorspace for V4L2DeviceFormat.
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
V4L2 has no "none" YCbCr encoding, and thus reports an encoding for all
formats, including RGB and raw formats. This causes the libcamera
ColorSpace to report incorrect encodings for non-YUV formats. Fix it by
overriding the encoding reported by the kernel to YCbCrEncoding::None
for non-YUV pixel formats and media bus formats.
Similarly, override the quantization range of non-YUV formats to full
range, as limited range isn't used for RGB and raw formats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Request::Private::reuse() is different from Request::reuse().
It resets the members of Request::Private to default values hence,
rename it to a more appropriate Request::Private::reset().
Update the usage and documentation accordingly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a pointer-to-member is passed to the Signal::connect() function with
arguments that don't match the Signal type, the pointer-to-member
version of connect() will not match during template argument resolution,
but the functor version will. This results in a compilation error in the
BoundMethodFunctor class, due to the pointer-to-member not being a
functor and thus not being callable directly. The error messages are
quite cryptic. With the following error applied,
diff --git a/test/signal.cpp b/test/signal.cpp
index 5c6b304dac0b..6dd11ac45313 100644
--- a/test/signal.cpp
+++ b/test/signal.cpp
@@ -107,6 +107,7 @@ protected:
/* Test signal emission and reception. */
called_ = false;
signalVoid_.connect(this, &SignalTest::slotVoid);
+ signalVoid_.connect(this, &SignalTest::slotInteger1);
signalVoid_.emit();
if (!called_) {
gcc outputs
../../include/libcamera/base/bound_method.h: In instantiation of ‘R libcamera::BoundMethodFunctor<T, R, Func, Args>::activate(Args ..., bool) [with T = SignalTest; R = void; Func = void (SignalTest::*)(int); Args = {}]’:
../../include/libcamera/base/bound_method.h:143:4: required from here
../../include/libcamera/base/bound_method.h:146:37: error: must use ‘.*’ or ‘->*’ to call pointer-to-member function in ‘((libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>*)this)->libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::func_ (...)’, e.g. ‘(... ->* ((libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTes
t::*)(int)>*)this)->libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::func_) (...)’
146 | return func_(args...);
| ~~~~~^~~~~~~~~
and clang isn't much better:
../../include/libcamera/base/bound_method.h:146:11: error: called object type 'void (SignalTest::*)(int)' is not a function or function pointer
return func_(args...);
^~~~~
../../include/libcamera/base/bound_method.h:137:2: note: in instantiation of member function 'libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::activate' requested here
BoundMethodFunctor(T *obj, Object *object, Func func,
^
../../include/libcamera/base/signal.h:80:27: note: in instantiation of member function 'libcamera::BoundMethodFunctor<SignalTest, void, void (SignalTest::*)(int)>::BoundMethodFunctor' requested here
SignalBase::connect(new BoundMethodFunctor<T, void, Func, Args...>(obj, nullptr, func));
^
../../test/signal.cpp:110:15: note: in instantiation of function template specialization 'libcamera::Signal<>::connect<SignalTest, void (SignalTest::*)(int), nullptr>' requested here
signalVoid_.connect(this, &SignalTest::slotInteger1);
^
Improve error reporting by disabling the functor version of connect()
when the Func argument isn't invocable with the Signal arguments. gcc
will then complain with
../../test/signal.cpp:110:36: error: no matching function for call to ‘libcamera::Signal<>::connect(SignalTest*, void (SignalTest::*)(int))’
110 | signalVoid_.connect(this, &SignalTest::slotInteger1);
| ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and clang with
../../test/signal.cpp:110:15: error: no matching member function for call to 'connect'
signalVoid_.connect(this, &SignalTest::slotInteger1);
~~~~~~~~~~~~^~~~~~~
which are more readable.
This change requires usage of std::is_invocable<>, which is only
available starting in C++17. This is fine for usage of the Signal class
within libcamera, as the project is compiled with C++17, but we try to
keep the public API compatible C++14. Condition the additional checks
based on the C++ version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a ColorSpace:fromString() function to parse a string into a color
space. The string can either contain the name of a well-known color
space, or four color space components separate by a '/' character.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The StringSplitter::iterator is used with the utils::split() function to
iterate over components of a split string. Add the necessary member
types expected by std::iterator_trait in order to satisfy the
LegacyInputIterator requirement and make the iterator usable in
constructors for various containers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The JPEG color space is badly name, as the JPEG specification (ITU-T
T.81) doesn't define any particular color space:
The interchange format does not specify a complete coded image
representation. Application-dependent information, e.g. colour
space, is outside the scope of this Specification.
The JFIF specification (ITU-T T.871) is clearer as it requires ITU-R
BT.601 YCbCr encoding and a full quantization range:
The interpretations of Y, CB, and CR are derived from the E'Y, E'Cb,
and E'Cr signals defined in the 625-line specification of Rec. ITU-R
BT.601, but these signals are normalized so as to permit the usage of
the full range of 256 levels of the 8-bit binary encoding of the Y
component.
It however doesn't specify color primaries or a transfer function
explicitly. It only mentions the latter when describing the conversion
from YCbCr to RGB:
The inverse relationship for computing full scale 8-bit per colour
channel gamma pre-corrected RGB values (following Rec. ITU-R BT.601
gamma pre-correction and colour primary specifications) from YCbCr
colours (with 256 levels per component) can be computed as follows:
[...]
Given that ITU-R BT.601-5 (1995) didn't specify color primaries or a
transfer function, and that the later ITU-R BT.601-7 (2011) version
specifies color primaries for the 625-line variant that do not match
sRGB, the JPEG color space in libcamera is badly named. This is
confirmed by ITU-T T.871:
As this Recommendation | International Standard is based on the prior
informally-circulated JFIF version 1.02 specification that was
produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR
601), it references that specification for definition of the E'Y,
E'Cb, and E'Cr signals that correspond to the YCBCR values specified
herein. However, since the development of the prior JFIF version 1.02
specification, additional industry specifications have been developed,
Rec. ITU-R BT.601 has been updated, and common industry practice has
emerged which often follows the sYCC specification in IEC
61966-2-1/Amd.1. The difference between the use of the colour
interpretation specification in this Recommendation | International
Standard and that of the sYCC specification may be considered
negligible in practice.
Rename the color space to sYCC, as its definition matches the sYCC
standard, and indicate that it is typically used to encode JPEG images.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The YamlObject::get() function template is implemented for 16-bit and
32-bit integers. Add an 8-bit specialization that will be used in the
rkisp1 IPA module, and extend the unit tests accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The message.h and mutex.h headers are not used in the libcamera public
API. Make them private to avoid there usage in applications, and to
prevent having to maintain them with a stable ABI.
As mutex.h is used by libcamerasrc, the GStreamer element must switch
from the libcamera_public to the libcamera_private dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera implements a pipeline handler locking mechanism based on
advisory locks on media devices, to prevent concurrent access to cameras
from the same pipeline handler from different processes (this only works
between multiple libcamera instances, as other processes won't use
advisory locks on media devices).
A side effect of the implementation prevents multiple cameras created by
the same pipeline handler from being used concurrently. Fix this by
turning the PipelineHandler lock() and unlock() functions into acquire()
and release(), with a use count to replace the boolean lock flag. The
Camera class is updated accordingly.
As a consequence of this change, the IPU3 pipeline handler will fail to
operate properly when the cameras it exposes are operated concurrently.
The android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview
test fails as a result. This should be fixed in the IPU3 pipeline
handler to implement mutual exclusion between cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Commit f25ad4a2b16b ("libcamera: formats: Reimplement V4L2
PixelFormatInfo::info()") changed the PixelFormatInfo::info(const
V4L2PixelFormat &format) function overload to:
return info(format.toPixelFormat());
As part of the series that contains such commit, the PixelFormatInfo for the
pixel format applied to a video device is now retrieved at
V4L2VideoDevice::open() time. Some video devices register formats not
available to applications, for example metadata formats or, in the case
of ISP devices, formats to describe the ISP statistics and parameters.
This causes the
format.toPixelFormat()
call to output a WARN message, which spams the log and unnecessarily alerts
the users.
Augment V4L2PixelFormat::toPixelFormat() with an optional argument to
suppress warnings in the case a V4L2 pixel format is not known, to
restore the behaviour preceding commit f25ad4a2b16b and returns an
invalid PixelFormatInfo without outputting any unnecessary warning
message.
Fixes: f25ad4a2b16b ("libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
