summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-08-26utils: Satisfy LegacyInputIterator with StringSplitter::iteratorLaurent Pinchart
The StringSplitter::iterator is used with the utils::split() function to iterate over components of a split string. Add the necessary member types expected by std::iterator_trait in order to satisfy the LegacyInputIterator requirement and make the iterator usable in constructors for various containers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-25libcamera: color_space: Rename Jpeg to SyccLaurent Pinchart
The JPEG color space is badly name, as the JPEG specification (ITU-T T.81) doesn't define any particular color space: The interchange format does not specify a complete coded image representation. Application-dependent information, e.g. colour space, is outside the scope of this Specification. The JFIF specification (ITU-T T.871) is clearer as it requires ITU-R BT.601 YCbCr encoding and a full quantization range: The interpretations of Y, CB, and CR are derived from the E'Y, E'Cb, and E'Cr signals defined in the 625-line specification of Rec. ITU-R BT.601, but these signals are normalized so as to permit the usage of the full range of 256 levels of the 8-bit binary encoding of the Y component. It however doesn't specify color primaries or a transfer function explicitly. It only mentions the latter when describing the conversion from YCbCr to RGB: The inverse relationship for computing full scale 8-bit per colour channel gamma pre-corrected RGB values (following Rec. ITU-R BT.601 gamma pre-correction and colour primary specifications) from YCbCr colours (with 256 levels per component) can be computed as follows: [...] Given that ITU-R BT.601-5 (1995) didn't specify color primaries or a transfer function, and that the later ITU-R BT.601-7 (2011) version specifies color primaries for the 625-line variant that do not match sRGB, the JPEG color space in libcamera is badly named. This is confirmed by ITU-T T.871: As this Recommendation | International Standard is based on the prior informally-circulated JFIF version 1.02 specification that was produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR 601), it references that specification for definition of the E'Y, E'Cb, and E'Cr signals that correspond to the YCBCR values specified herein. However, since the development of the prior JFIF version 1.02 specification, additional industry specifications have been developed, Rec. ITU-R BT.601 has been updated, and common industry practice has emerged which often follows the sYCC specification in IEC 61966-2-1/Amd.1. The difference between the use of the colour interpretation specification in this Recommendation | International Standard and that of the sYCC specification may be considered negligible in practice. Rename the color space to sYCC, as its definition matches the sYCC standard, and indicate that it is typically used to encode JPEG images. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21libcamera: yaml_parser: Enable YamlObject::get() for int8_t and uint8_tLaurent Pinchart
The YamlObject::get() function template is implemented for 16-bit and 32-bit integers. Add an 8-bit specialization that will be used in the rkisp1 IPA module, and extend the unit tests accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-16libcamera: base: Make message.h and mutex.h privateLaurent Pinchart
The message.h and mutex.h headers are not used in the libcamera public API. Make them private to avoid there usage in applications, and to prevent having to maintain them with a stable ABI. As mutex.h is used by libcamerasrc, the GStreamer element must switch from the libcamera_public to the libcamera_private dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-10libcamera: Allow concurrent use of cameras from same pipeline handlerLaurent Pinchart
libcamera implements a pipeline handler locking mechanism based on advisory locks on media devices, to prevent concurrent access to cameras from the same pipeline handler from different processes (this only works between multiple libcamera instances, as other processes won't use advisory locks on media devices). A side effect of the implementation prevents multiple cameras created by the same pipeline handler from being used concurrently. Fix this by turning the PipelineHandler lock() and unlock() functions into acquire() and release(), with a use count to replace the boolean lock flag. The Camera class is updated accordingly. As a consequence of this change, the IPU3 pipeline handler will fail to operate properly when the cameras it exposes are operated concurrently. The android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview test fails as a result. This should be fixed in the IPU3 pipeline handler to implement mutual exclusion between cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2022-08-10libcamera: formats: Fix warning for unknown V4L2 pixfmtJacopo Mondi
Commit f25ad4a2b16b ("libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()") changed the PixelFormatInfo::info(const V4L2PixelFormat &format) function overload to: return info(format.toPixelFormat()); As part of the series that contains such commit, the PixelFormatInfo for the pixel format applied to a video device is now retrieved at V4L2VideoDevice::open() time. Some video devices register formats not available to applications, for example metadata formats or, in the case of ISP devices, formats to describe the ISP statistics and parameters. This causes the format.toPixelFormat() call to output a WARN message, which spams the log and unnecessarily alerts the users. Augment V4L2PixelFormat::toPixelFormat() with an optional argument to suppress warnings in the case a V4L2 pixel format is not known, to restore the behaviour preceding commit f25ad4a2b16b and returns an invalid PixelFormatInfo without outputting any unnecessary warning message. Fixes: f25ad4a2b16b ("libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()") Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-08-09libcamera: pub_key: Support openssl as an alternative to gnutlsLaurent Pinchart
Support verify IPA signatures with openssl as an alternative to gnutls, to offer more flexibility in the selection of dependencies. Use gnutls by default, for no specific reason as both are equally well supported. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-09libcamera: controls: Generate and use fixed-sized Span typesChristian Rauch
Define Span types explicitly as either variable- or fixed-sized. This introduces a new convention for defining Span dimensions in the property and control value definitions and generates Span types as variable-sized Span<T> or as fixed-sized Span<T,N>. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-04pipeline: rkisp1: Move ControlInfoMap to IPA moduleLaurent Pinchart
Currently the pipeline handler advertises controls handled by the IPA from a ControlInfoMap it manually constructs. This is wrong, as the IPA module is the component that knows what controls it supports. Fix this by moving the ControlInfoMap construction to the IPA module, and pass it to the pipeline handler as a return value from the IPA init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
2022-08-03libcamera: v4l2_subdevice: Add support for the V4L2 subdev routing APIJacopo Mondi
Extend the V4L2Subdevice class to support getting and setting routing tables. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: v4l2_subdevice: Collect subdev capabilitiesJacopo Mondi
Collect subdev capabilities at open() time. Model the V4L2SubdevCapabilties as V4L2Capability from the video device class. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-03libcamera: v4l2_subdevice: Change V4L2Subdevice::WhenceJacopo Mondi
The V4L2Subdevice::Whence enumerations defines two values that should correspond to the V4L2_SUBDEV_FORMAT_ACTIVE and V4L2_SUBDEV_FORMAT_TRY definitions. The V4L2 symbols are defined as: V4L2_SUBDEV_FORMAT_TRY = 0, V4L2_SUBDEV_FORMAT_ACTIVE = 1, While the libcamera defined enumeration is: enum Whence { ActiveFormat, TryFormat, } As V4L2Subdevice::Whence values are used to populate data types defined in v4l2-subdev.h used as arguments to VIDIOC_SUBDEV_* ioctls, the V4L2Subdevice class is required to adjust their value as: subdevFmt.which = whence == ActiveFormat ? V4L2_SUBDEV_FORMAT_ACTIVE : V4L2_SUBDEV_FORMAT_TRY; Drop the adjustment by defining : Whence::TryFormat = V4L2_SUBDEV_FORMAT_TRY; Whence::ActiveFormat = V4L2_SUBDEV_FORMAT_ACTIVE; Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-03include: linux: Add V4L2 subdev internal routing APILaurent Pinchart
The V4L2 subdev internal routing API is under development. Add it manually to the v4l2-subdev.h kernel header for now. The code corresponds to the "[PATCH v11 00/36] v4l: routing and streams support" series as posted to the linux-media mailing list. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03include: linux: Add V4L2 YUVA32 and YUVX32 pixel formatsLaurent Pinchart
These YUV 4:4:4 packed formats are used by the ISI driver. Add them to videodev2.h. This is merged in the upstream kernel as 00f6842ef41d ("media: v4l: Add packed YUV 4:4:4 YUVA and YUVX pixel formats"). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03include: drm_fourcc: Add AVUY and XVUY 4:4:4 packet formatsLaurent Pinchart
Add FourCCs for the YUV 4:4:4 packed formats AVUY8888 and XVUY8888. This is merged in the upstream kernel as 53618649ca6d ("drm/fourcc: Add formats for packed YUV 4:4:4 AVUY and XVUY permutations"). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03include: linux: Update kernel headers to version v5.19Laurent Pinchart
Update kernel headers to v5.19 using utils/update-kernel-headers.sh and re-instating libcamera local modifications. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-03libcamera: v4l2_videodevice: Match formats supported by the deviceJacopo Mondi
Now that V4L2PixelFormat::fromPixelFormat() returns a list of formats to chose from, select the one supported by the video device by matching against the list of supported pixel formats. The first format found to match one of the device supported ones is returned. As the list of pixel formats supported by the video device does not change at run-time, cache it at device open() time. Maximize the lookup efficiency by storing the list of supported V4L2PixelFormat in an std::unordered_set<>. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_pixelformat: Implement std::hash specializationLaurent Pinchart
Inject a specialization of std::hash<> for the V4L2PixelFormat class in the std namespace to make it possible to store instances of the class in the std::unordered_map and std::unordered_set containers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_pixelformat: Return the list of V4L2 formatsJacopo Mondi
Multiple V4L2 formats can be associated with a single PixelFormat. Now that users of V4L2PixelFormat::fromPixelFormat() have been converted to use V4L2VideoDevice::toV4L2PixelFormat(), return the full list of V4L2 formats in order to prepare to match them against the ones supported by the video device. The V4L2 compatibility layer, not having any video device to interact with, is converted to use the first returned format unconditionally. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: v4l2_videodevice: Reintroduce toV4L2PixelFormat()Jacopo Mondi
This is a partial revert of commit 395d43d6d75b ("libcamera: v4l2_videodevice: Drop toV4L2PixelFormat()") The function was removed because it incorrectly maps non-contiguous V4L2 format variants (ie V4L2_PIX_FMT_YUV420M) to the API version supported by the video device (singleplanar API and multiplanar API). It was decided at the time to remove the function and let its users call directly V4L2PixelFormat::fromPixelFormat() which accepts a 'multiplanar' flags. As we aim to associate multiple V4L2PixelFormat to a single libcamera format, the next patches will verify which of them is actually supported by the video device. For now, return the contiguous version unconditionally. Re-introduce V4L2VideoDevice::toV4L2PixelFormat() and convert all the V4L2PixelFormat::fromPixelFormat() users to use it. The V4L2 compatibility layer is the only outlier as it doesn't have a video device to poke, hence it still uses V4L2PixelFormat::fromPixelFormat(). Next patches will implement the device format matching logic and handle the non-contiguous plane issue in V4L2VideoDevice::toV4L2PixelFormat(). Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-03libcamera: formats: Merge V4L2 single and multi formatsJacopo Mondi
To each libcamera PixelFormat two V4L2 formats are associated, the 'single' and 'multi' format variants. The two versions list plane contiguous and non-contiguous format variants, and an optional argument to V4L2PixelFormat::fromPixelFormat() was used to select which one to pick. In order to prepare to remove V4L2PixelFormat::fromPixelFormat(), and considering that no caller in the codebase uses the non-contiguous format variant, merge the two formats vectors in a single one and default the selection to the first available one, which is functionally equivalent to what is currently implemented. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-07-28libcamera: Drop unnecessary typename keyword used with std::enable_if_tLaurent Pinchart
Usage of the std::enable_if_t type doesn't need to be prefixed by typename. Drop the unnecessary keyword. Reported-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28include: linux: Update rkisp1 kernel header for DPCC configurationFlorian Sylvestre
To improve the kernel interface, a proposal has been made to the linux-kernel [1] to improve the configuration of the Defective Pixel Cluster Correction (DPCC). [1] https://lore.kernel.org/linux-media/20220616160456.21549-1-laurent.pinchart@ideasonboard.com/ Update the local copy of the rkisp1-config.h to match the proposal. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28libcamera: base: utils: Provide defopt to simplify std::optional::value_or() ↵Laurent Pinchart
usage The std::optional<T>::value_or(U &&default_value) function returns the contained value if available, or default_value if the std::optional has no value. If the desired default value is a default-constructed T, the obvious option is to call std::optional<T>::value_or(T{}). This approach has two drawbacks: - The \a default_value T{} is constructed even if the std::optional instance has a value, which impacts efficiency. - The T{} default constructor needs to be spelled out explicitly in the value_or() call, leading to long lines if the type is complex. Introduce a defopt variable that solves these issues by providing a value that can be passed to std::optional<T>::value_or() and get implicitly converted to a default-constructed T. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-28libcamera: yaml_parser: Add getList() functionFlorian Sylvestre
Allow to retrieve a YAML list of any already supported types in a std::vector. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28libcamera: yaml_parser: Preserve order of items in dictionaryLaurent Pinchart
The std::map container used to store dictionary items in YamlObject doesn't preserve the YAML data order, as maps are ordered by key, not by insertion order. While this is compliant with the YAML specification which doesn't guarantee ordering of mappings, the Raspberry Pi IPA relies on elements being ordered as in the YAML data. To replace the dependency on boost with the YamlParser class, we thus need to guarantee that the order is preserved. Preserve the order by storing items in list_ unconditionally. Turn the list_ vector from storing YamlObject unique pointers to storing key-value pairs, with the key being absent when the object is a list, not a dictionary. The YamlObject implementation is updated to preserve the existing API, with the only difference being that YamlObject::memberNames() now returns member names in the same order as in the YAML file. The ordering is an implementation detail, so changing it doesn't violate the YAML specification. The documentation is not updated to reflect this, as we don't want any new user to rely on a particular ordering. This commit could be reverted if desired when the Raspberry Pi IPA updates to a new tuning data format and drops support for the old format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28libcamera: yaml_parser: Replace ok flag to get() with std::optionalLaurent Pinchart
The YamlObject::get() function takes a default value and an optional bool ok flag to handle parsing errors. This ad-hoc mechanism complicates error handling in callers. A better API is possible by dropping the default value and ok flag and returning an std::optional. Not only does it simplify the calls, it also lets callers handle errors through the standard std::optional class instead of the current ad-hoc mechanism. Provide a get() wrapper around std::optional::value_or() to further simplify callers that don't need any specific error handling. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-27raspberrypi: Update Copyright statement in all Raspberry Pi source filesNaushir Patuck
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new Raspberry Pi entity name. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-20libcamera: controls: Suppress error message from ControlList::get()Naushir Patuck
Now that ControlList::get() returns a std::optional<T> to handle missing controls, the error log message in the call to ControlList::find() is unnecessary and likely invalid. Fix this by avoiding the call to ControlList::find() from ControlList::get() and replacing with a call to the underlying std::unordered_map::find(). Fixes: 1c4d48018505 ("libcamera: controls: Use std::optional to handle invalid control values") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-20libcamera: controls: Drop ControlList::contains()Laurent Pinchart
The ControlList::contains(const ControlId &id) function isn't used, as it has been replaced by usage of the get() function. Document get as being the preferred way to check for the presence of a control in a ControlList, and drop the contains() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-20libcamera: Remove extra ':' after '\todo'Laurent Pinchart
The doxygen '\todo' directory doesn't need to be followed by a colon, yet a few strayed occurrences have made their way in. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-07-19libcamera: controls: Use std::optional to handle invalid control valuesChristian Rauch
Previously, ControlList::get<T>() would use default constructed objects to indicate that a ControlList does not have the requested Control. This has several disadvantages: 1) It requires types to be default constructible, 2) it does not differentiate between a default constructed object and an object that happens to have the same state as a default constructed object. std::optional<T> additionally stores the information if the object is valid or not, and therefore is more expressive than a default constructed object. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-05delayed_controls: Remove reduandant firstSequence_Kieran Bingham
The DelayedControls implementation tracked the sequence numbers to determine the offset if a device did not commence with a sequence number of 0. This guarantee is now handled by the V4L2VideoDevice. Remove the firstSequence_ offset and the corresponding running_ flag which was used to track setting firstSequence_ from the DelayedControls. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-04libcamera: framebuffer: Turn the cookie into a 64-bit integerLaurent Pinchart
To allow associating pointers with FrameBuffer instances, turn the cookie into a 64-bit integer. This matches the Request cookie with is also a uint64_t. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Correctly report available control limitsNaushir Patuck
The ipa currently advertises a static ControlInfoMap to specify the available controls and their limits. Fix this limitation by having the IPA populate a new ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and FrameDurationLimits controls based on the current sensor mode. This new ControlInfoMap is then returned back to the pipeline handler and available to the application after a successful Camera::configure() call. Before the first call to Camera::configure(), this ControlInfoMap provides some reasonable default limits for ExposureTime, AnalogueGain, and FrameDurationLimits. However, applications must not rely on these values, but obtain the correct limits after the call to Camera::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Move ControlInfoMap to the IPANaushir Patuck
Currently the pipeline handler advertises controls handled by the IPA from a static ControlInfoMap defined in the raspberrypi.h header. This change removes this header file, and instead the IPA returns the ControlInfoMap to the pipeline handler from the ipa::init() function. This is done to allow the IPA to adjust the limits of the controls based on the sensor mode in a subsequent change. Bug: https://bugs.libcamera.org/show_bug.cgi?id=83 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-27libcamera: v4l2_videodevice: Identify non-zero stream startsKieran Bingham
V4L2 Video devices should always start streaming from index zero. Identify and report a warning if they don't, and correct for any offset. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-20libcamera: yaml_parser: Add get() specializations for 16-bit integersLaurent Pinchart
Extend the YamlObject::get() function template to support 16-bit integers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Remove memberNames() functionLaurent Pinchart
Now that YamlObject supports iteration, the memberNames() function isn't useful anymore as it can be implemented using utils::map_keys() if really needed. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Add iterator APILaurent Pinchart
Allow using range-based for loops over YamlObject instances by implementing iterators. New YamlObject::DictAdapter and YamlObject::ListAdapter adapter classes are introduced to provide different iterators depending on the object type. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-20libcamera: yaml_parser: Use std::is_same_v<>Laurent Pinchart
As the YamlObject class is internal to libcamera, it can use the full C++17 API. Replace std::is_same<>::value with std::is_same_v<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
2022-06-16libcamera: yaml_parser: Switch from FILE to FileLaurent Pinchart
THe FILE object isn't very user-friendly as it requires manual close. Replace it with File to provide RAII-style resource management in the YamlParser API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-16libcamera: yaml_parser: Extend YamlObject::size() to dictionariesLaurent Pinchart
Dictionaries have a size too, extend the size() function to support them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-16libcamera: yaml_object: Turn Type into an enum classLaurent Pinchart
Turn the Type enum into an enum class to force qualifying 'List' and 'Dictionary' in the YamlObject namespace scope. This will help avoiding ambiguities when adding iterator support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-06libcamera: base: log: Color the log prefixLaurent Pinchart
Add coloring to the log prefix to increase log readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-06libcamera: base: log: Add coloring to the log outputLaurent Pinchart
Extend the logger to support coloring messages. The log level is colorized with per-level colors, and the category with a fixed color. This makes the log output more readable. Coloring is enabled by default when logging to std::cerr, and can be disabled by setting the LIBCAMERA_LOG_NO_COLOR environment variable. When logging to a file with LIBCAMERA_LOG_FILE, coloring is disabled. It can be enabled for file logging using the logSetFile() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-05libcamera: request: Add operator<<()Jacopo Mondi
With the recent addition of operator<<() in most libcamera core classes to replace usage of the toString() function the Request class was left behind. Add operator<<() for the Request class and reimplement toString(). Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27libcamera: ipa: Move IPA control serialization structures to libcamera namespaceLaurent Pinchart
The C structures used to serialize controls are currently defined in the root namespace, which places them at the root level in the class list generated by Doxygen. Move them to the libcamera namespace to fix that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libcamera: media_device: Return string references to avoid copiesLaurent Pinchart
The MediaDevice::driver(), deviceNode() and model() functions return a const std::string, copying the string stored internally in the class. Return references instead to avoid copies. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-10libcamera: raspberrypi: Fetch correct value for SensorSensitivityDavid Plowman
These changes retrieve the correct value for sensitivity of the mode selected for the sensor. This value is known to the CamHelper which passes it across to the pipeline handler so that it can be set correctly in the camera properties. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>