summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-07-02libcamera: controls: Extend ControlList to access controls by IDLaurent Pinchart
The ControlList class implements a map from control specifier to control ID. To avoid constant lookups of ControlInfo when using the class in the libcamera core or in pipeline handlers, the map uses ControlInfo pointers instead of ControlId values. This is however not very convenient for applications or pipeline handlers, as they would be forced to first look up the ControlInfo pointers for the controls they want to access. Facilitate ease of use of ControlLists by implementing an internal lookup of the ControlInfo from the controls provided by the Camera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-02libcamera: camera: Provide a list of ControlInfoKieran Bingham
Extend the Camera class to expose the controls it supports. Each pipeline should generate a list of controls supported by each camera it creates. These are represented by a ControlInfoMap, and an associated ControlList of default values. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-02libcamera: controls: Introduce control-related data typesKieran Bingham
Add a set of data types to support controls: - ControlValue stores a control type and value in a generic way - ControlId enumerates all the control identifiers - ControlIdentifier declares the types of a control and map their names - ControlInfo stores runtime information for controls - ControlList contains a set of control info and value pairs The control definitions map is generated from the controls documentation to ensure that the two will always be synchronised. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-01libcamera: timer: Stop timer when it is deletedNiklas Söderlund
If a timer is running while it's deleted it is still register with the event dispatcher. This causes a segmentation fault when the timer time-out and its signal is emitted. Fix this my stopping the timer when it's deleted. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-01libcamera: Use 'files()' function to specify gen-header.shKieran Bingham
The files() function generates a variable with the location of the referenced files. This is shorter than joining the current_source_dir() of which use is somewhat frowned upon. Fixes: 90de3690c456 ("libcamera: Auto-generate libcamera.h") Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: Rename V4L2Device to V4L2VideoDeviceJacopo Mondi
In preparation of creating a new V4L2Device base class, rename V4L2Device to V4L2VideoDevice. This is a project wide rename without any intended functional change. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: stream: StreamConfiguration: Add StreamFormats informationNiklas Söderlund
Allow StreamFormats to be associated to a StreamConfiguration. The intention is that pipeline handlers should associate formats to a StreamConfiguration when it's created in generateConfiguration(). Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: stream: Add StreamFormatsNiklas Söderlund
Add a StreamFormats class which describes all the formats supported by a stream. The object does not collect any information itself but can simplify user interactions with formats as it's able to translate a stream format range into a discrete list and a discrete list to a range. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: geometry: SizeRange: Add contains()Niklas Söderlund
Add a method to check if a Size can fit inside a SizeRange. When determining if a size is containable take step values into account if they are not set to 0. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: geometry: SizeRange: Add toString()Niklas Söderlund
It's useful to be able to print a string representation of a SizeRange to the log or console, add a toString() method. While at it turn the structure into a class as it contains functions as well as data. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: geometry: SizeRange: Extend with step informationNiklas Söderlund
The size range described might be subject to certain step limitations. Make it possible to record this information. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: geometry: SizeRange: Add constructor for a single sizeNiklas Söderlund
The SizeRange can describe a single size where min == max. Add a constructor to help create such a description. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-05libcamera: ipa_module_info: update struct to allow IPA matchingPaul Elder
We need a way to match pipelines with IPA modules, so add fields in IPAModuleInfo to hold the IPA module API version number, the pipeline name, and the pipeline version. The module API version is used to determine the layout of struct IPAModuleInfo. Also update IPA module tests and Doxygen accordingly. Doxygen needs to be updated to accomodate __attribute__((packed)). Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-05libcamera: ipa_interface: add headerPaul Elder
Define an IPAInterface class which will contain an IPA implementation. The methods that the IPAInterface exposes form the interface to the IPA implementation, hence the name. IPA module shared objects will implement this class. This also means that IPA module shared objects must be implemented in C++, so remove the C test IPA module. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-02include: linux: Update Linux headers to v5.1Jacopo Mondi
Update kernel headers to v5.1 The most notable introduction for libcamera is support for V4L2_BUF_TYPE_META_OUTPUT. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-23libcamera: Auto-generate libcamera.hLaurent Pinchart
As shown by two missing includes, keeping the libcamera.h file in sync when adding or removing headers is an error-prone manual process. Automate it by generating the header automatically. The libcamera.h header is also added to the libcamera dependency libcamera_dep to ensure that the headers gets generated before any source depending on it gets compiled. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23libcamera: camera: Add a validation API to the CameraConfiguration classLaurent Pinchart
The CameraConfiguration class implements a simple storage of StreamConfiguration with internal validation limited to verifying that the stream configurations are not empty. Extend this mechanism by implementing a smart validate() method backed by pipeline handlers. This new mechanism changes the semantic of the camera configuration. The Camera::generateConfiguration() operation still generates a default configuration based on roles, but now also supports generating empty configurations to be filled by applications. Applications can inspect the configuration, optionally modify it, and validate it. The validation implements "try" semantics and adjusts invalid configurations instead of rejecting them completely. Applications then decide whether to accept the modified configuration, or try again with a different set of parameters. Once the configuration is valid, it is passed to Camera::configure(), and pipeline handlers are guaranteed that the configuration they receive is valid. A reference to the Camera may need to be stored in the CameraConfiguration derived classes in order to access it from their validate() implementation. This must be stored as a std::shared_ptr<> as the CameraConfiguration instances belong to applications. In order to make this possible, make the Camera class inherit from std::shared_from_this<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-05-23libcamera: camera: Return a pointer from generateConfiguration()Laurent Pinchart
To prepare for specialising the CameraConfiguration class in pipeline handlers, return a pointer to a camera configuration instead of a reference from Camera::generateConfiguration(). The camera configuration always needs to be allocated from the pipeline handler, and its ownership is passed to the application. For symmetry, change Camera::configure() to take a CameraConfiguration pointer instead of a reference. This aligns with our coding practice of passing parameters that are modified by the callee by pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Refactor the camera configuration storage and APILaurent Pinchart
Refactor the CameraConfiguration structure to not rely on Stream instances. This is a step towards making the camera configuration object more powerful with configuration validation using "try" semantics. The CameraConfiguration now exposes a simple vector-like API to access the contained stream configurations. Both operator[]() and at() are provided to access elements. The isEmpty() method is renamed to empty() and the methods reordered to match the std::vector class. As applications need access to the Stream instances associated with the configuration entries in order to associate buffers with streams when creating requests, expose the stream selected by the pipeline handler through a new StreamConfiguration::stream(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Use stream roles directly instead of StreamUsageLaurent Pinchart
In order to prepare for an API overhall of the camera configuration generation, remove the StreamUsage class and replace its uses by stream roles. The size hints can't be specified anymore, and will be replaced with an API on the StreamConfiguration to negotiate configuration parameters with cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: camera: Rename configureStreams() and streamConfiguration()Laurent Pinchart
Rename the configureStreams() and streamConfiguration() methods to configure() and generateConfiguration() respectively in order to clarify the API. Both methods deal with CameraConfiguration objects, and are thus not limited to streams, even if a CameraConfiguration currently contains streams only. While at it, remove the qcam MainWindow::configureStreams() method that is declared but never defined or used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-21libcamera: ipa_module: add IPA shared library modulePaul Elder
Implement a class to wrap around an IPA module shared object. For now, just load a struct IPAModuleInfo with symbol name ipaModuleInfo from an IPA module .so shared object. Also provide a public header file including the struct IPAModuleInfo, structured such that both C and C++ IPA modules are supported. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-30libcamera: Use the Size class through libcameraLaurent Pinchart
Several of our structures include width and height fields that model a size while we have a Size class for that purpose. Use the Size class through libcamera, and give it a toString() method like other geometry and format classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-04-26libcamera: Correct struct forward declarationsLaurent Pinchart
Several structures are forward-declarated as classes. Fix this by using the struct keyword where appropriate, or removing the forward declaration when not needed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-04-19libcamera: stream: Add and use toString() method to StreamConfigurationLaurent Pinchart
Add a toString() method to the StreamConfiguration class, and replace all manually coded implementations through the source code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: geometry: Add comparison operators to geometry classesLaurent Pinchart
Add equality and inequality comparison operators for the Rectangle, Size and SizeRange classes. For the Size class, also add ordering operators. Sizes are first compared on combined width and height, then on area, and finally on width only to achieve a stable ordering. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: geometry: Use Size to store min and max in SizeRangeLaurent Pinchart
Instead of storing four integers for the minimum and maximum width and height in the SizeRange class, use two instance of the Size class for the minimum and maximum sizes. While it at replace the mention of image size with size in the SizeRange documentation, as the Size class isn't limited to image sizes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: geometry: Sort classes alphabeticallyLaurent Pinchart
Move the Size class before the SizeRange class. No functional change. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: buffer: Store Request reference in BufferJacopo Mondi
Add to the Buffer class methods to set and retrieve a reference to the Request instance the buffer is part of. As buffers outlive the Request they are associated with, the reference is only temporary valid during the buffer completion interval (from when the buffer gets queued to Camera for processing, until it gets marked as completed). Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: request: Expose the Stream to Buffers mapJacopo Mondi
Add to the Request class a method to access the map of Stream to Buffer. With the introduction of multiple stream support, pipeline handler should be able to access the map of streams at request queueing time. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-18libcamera: request: Add hasPendingBuffers() methodJacopo Mondi
Add method to verify if a request has pending buffers yet to be completed. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-16libcamera: stream: Make Stream inheritableJacopo Mondi
In preparation for multiple streams support prepare to allow sub-classing the Stream class by removing the 'final' specifier from the class definition and make its private members protected. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-09libcamera: Switch to CameraConfigurationNiklas Söderlund
Implement the camera configuration thru out the library, tests, cam and qcam tools. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-09libcamera: camera: Add CameraConfigurationNiklas Söderlund
To properly support both multiple streams and stream usages the library must provide a method to map the stream usages to the returned streams configurations. Add a camera configuration object to handle this mapping. Applications can iterate over the returned camera configuration to retrieve the streams selected by the library in the same order as the usages it provided to the library. Applications can use the operator[] to retrieve the stream pointer and the stream configuration. Using a numerical index retrieves the stream pointer, the numerical indexes corresponds to the insertion order of usages in the CameraConfiguration, using the stream pointer retrieves the stream's configuration. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: camera: Add support for stream usagesNiklas Söderlund
Instead of requesting the default configuration for a set of streams where the application has to figure out which streams provided by the camera is best suited for its intended usage, have the library figure this out by using stream usages. The application asks the library for a list of streams and a suggested default configuration for them by supplying a list of stream usages. Once the list is retrieved the application can fine-tune the returned configuration and then try to apply it to the camera. Currently no pipeline handler is prepared to handle stream usages but nor did it make use of the list of Stream IDs which was the previous interface. The main reason for this is that all cameras currently only provide one stream each. This will still be the case but the API will be prepared to expand both pipeline handlers and applications to support streams usages. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: stream: Add basic stream usagesNiklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera add stream usages. The usages will be used by applications to describe how they intend to use a camera and replace the Stream IDs when retrieving default configuration from the camera using streamConfiguration(). Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: Make geometry.h a public headerNiklas Söderlund
Make the geometry header public so it can be used by the API facing applications. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-02libcamera: stream: Qualify 'Camera' friend directiveJacopo Mondi
Align the Stream class to all other classes in the code base to use the 'class' qualifier in 'friend' declarations. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-02libcamera: stream: Remove 2 empty linesJacopo Mondi
Remove two empty lines. Cosmetic change only. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-01libcamera: Handle request completion explicitly in pipeline handlersLaurent Pinchart
Request complete by themselves when all the buffers they contain have completed, connecting the buffer's completed signal to be notified of buffer completion. While this works for now, it prevents pipelines from delaying request completion until all metadata is available, and makes it impossible to ensure that requests complete in the order they are queued. To fix this, make request completion handling explicit in pipeline handlers. The base PipelineHandler class is extended with implementations of the queueRequest() and stop() methods and gets new completeBuffer() and completeRequest() methods to help pipeline handlers tracking requests and buffers. The three existing pipeline handlers connect the bufferReady signal of their capture video node to a slot of their respective camera data instance, where they use the PipelineHandler helpers to notify buffer and request completion. Request completion is handled synchronously with buffer completion as the pipeline handlers don't need to support more advanced use cases, but this paves the road for future work. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-03-01libcamera: request: Add request completion statusLaurent Pinchart
Add a new field to the Request class to report its completion status, and a new complete() method to update the status. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-03-01libcamera: buffer: Add buffer completion statusLaurent Pinchart
Add a new field to the Buffer class to report its completion status, with a new cancel() method to mark the buffer as cancelled. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-03-01libcamera: camera: add state machine to control access from applicationsNiklas Söderlund
There is a need to better control the order of operations an application performs on a camera for it to function correctly. Add a basic state machine to ensure applications perform operations on the camera in good order. Internal to the Camera states are added; Available, Acquired, Configured, Prepared and Running. Each state represents a higher state of configuration of the camera ultimately leading to the highest state where the camera is capturing frames. Each state supports a subset of operations the application may perform. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-02-28libcamera: store stream pointers in sets instead of a vectorsNiklas Söderlund
The arrays that store Stream pointers shall always contain unique values. Storing them in vectors opens up for the same stream pointer appearing twice. Remove this possibility by storing them in a set which guarantees each element is unique. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-02-13libcamera: signal: Disconnect signal automatically on slot deletionLaurent Pinchart
When a signal is connected to a member function slot, the slot is not disconnected when the slot object is deleted. This can lead to calling a member function of a deleted object if the signal isn't disconnected manually by the slot object's destructor. Make signal handling easier by implementing a base Object class that tracks all connected signals and disconnects from them automatically when the object is deleted, using template specialization resolution in the Signal class. As inheriting from the Object class may to a too harsh requirement for Signal usage in applications, keep the existing behaviour working if the slot doesn't inherit from the Object class. We may reconsider this later and require all slot objects to inherit from the Object class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-13libcamera: signal: Fix coding style issuesLaurent Pinchart
Fix issues reported by checkstyle.py in preparation for further changes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-06libcamera: camera: Extend the interface to support captureNiklas Söderlund
In order to support capture, the camera needs methods to allocate and free buffers, to start and stop the capture and to queue requests. Define those interfaces in the Camera class and implement them to call the corresponding pipeline handler methods. Once a camera is started the pipeline handler of the camera will begin processing requests queued to the camera by the application until it gets stopped. Once a request is created it can be queued to the camera and the application will be notified asynchronously once the request is completed and be able to process all the buffers involved in the request. At this point the request objects don't support controls. This will be extended in the future. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-02-06libcamera: camera: Cache the stream configuration in the stream objectNiklas Söderlund
The API towards the application and pipeline handler can be simplified if the camera caches which streams have been selected and their respective configuration. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-02-06libcamera: camera: Add helper to check for exclusive accessNiklas Söderlund
Some operations on the camera requires the application to have exclusive access to the camera. To help check for this in these operations add a helper. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-02-06libcamera: Provide a Request objectJacopo Mondi
Implement a Request object used by applications to queue image capture requests to a camera. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>