| Age | Commit message (Collapse) | Author |
|---|
|
The type of a control value is also the type of the control. Shorten the
ControlValueType enumeration to ControlType, and rename ControlValue* to
ControlType* for better clarity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The ipa includes are located in include/libcamera/ipa/. This gives an
incorrect impression that they are a sub-part of the rest of the
libcamera API, while they are the API towards the IPA the same way that
include/libcamera/ contains the API towards applications. To clarify
this, move them to include/ipa/.
The IPA headers are however still part of libcamera, so installing them
to ${prefix}/include/ipa/ would make little sense. To fix this, move the
application facing API to ${prefix}/include/libcamera/libcamera/ when
installed, and the IPA to ${prefix}/include/libcamera/ipa/. When major
versions of libcamera will be released, they could then be installed
side by side in ${prefix}/include/libcamera-${version}/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the clock_gettime()-based API with durations expressed as
integers with the std::chrono API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraManager class is not supposed to be instantiated multiple
times, which led to a singleton implementation. This requires a global
instance of the CameraManager, which is destroyed when the global
destructors are executed.
Relying on global instances causes issues with cleanup, as the order in
which the global destructors are run can't be controlled. In particular,
the Android camera HAL implementation ends up destroying the
CameraHalManager after the CameraManager, which leads to use-after-free
problems.
To solve this, remove the CameraManager::instance() method and make the
CameraManager class instantiable directly. Multiple instances are still
not allowed, and this is enforced by storing the instance pointer
internally to be checked when an instance is created.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the Object class implements parent-child relationships, make it
possible to create EventNotifier and Timer instances with a parent by
adding a parent argument to their constructors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a parent Object to Object instances, and track the parent-children
relationships. Children are bound to the same thread as their parent,
and moving an Object to a thread automatically moves all its children.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Timer instances are registered with the event dispatcher instance of
the CameraManager. This makes it impossible to use timers in other
threads.
Fix this by inheriting from Object, which allows binding instances to a
thread, and register them with the event dispatcher for the thread they
are bound to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The EventNotifier instances are registered with the event dispatcher
instance of the CameraManager. This makes it impossible to use event
notifiers in other threads.
Fix this by inheriting from Object, which allows binding instances to a
thread, and register them with the event dispatcher for the thread they
are bound to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraManager class uses the event dispatcher of the current thread.
This makes the CameraManager::eventDispatcher() and
CameraManager::setEventDispatcher() methods inconsistent, as they access
different event dispatcher instances depending on the calling thread.
Fix this by inheriting from the Object class, which binds the
CameraManager to a thread, and use the event dispatcher of the bound
thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Send a synchronous message to objects just before they get moved to a
new thread. This allows the object to perform any required processing.
EventNotifier and Timer objects will use this mechanism to move
themselves to the new thread's event disaptcher.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a helper invokeMethod() to the Object class that allows asynchrnous
invocation of any method of an Object instance. Asynchronous invocation
occurs when control returns to the event dispatcher of the target
object's thread, in the context of that thread.
To support this, generalise the SignalMessage implementation to support
automatic deletion of the associated BoundMethod, and rename the message
to InvokeMessage to reflect the more generic purpose.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To make the BoundMethod classes more generic, replace direct access to
private member from Signal classes with accessors or helper functions.
This allows removal of friend statements from the BoundMethod classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Move the Slot* classes to bound_method.{h,cpp} and rename them to
Bound*Method*. They will be reused to implement asynchronous method
invocation similar to cross-thread signal delivery.
This is only a move and rename, no functional changes are included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The message() method shouldn't be called externally (except by a few
friend classes), make it protected.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add SPDX indentifier to Apache-2.0 licensed android headers.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Copy the Android Camera3 HAL headers from the ChromiumOS build system
and define a new inclusion directive in the meson build system for them.
The header files have been copied from:
https://chromium.googlesource.com/chromiumos/platform2
at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03
and provide:
1) Android CameraHAL3 HAL headers in include/android/hardware/
2) The Android system headers in include/android/system/
3) The Android camera metadata headers in include/android/metadata/
The original path in the Cros platform2/ repository is, respectively:
camera/android/header_files/include/hardware
camera/android/header_files/include/system
camera/android/libcamera_metadata/include/
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow logging to syslog, or any given ostream, or to nowhere. The
logging API is updated to accomodate these new logging destinations.
LogMessage is modified to allow this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add and use an operation to assign to Buffer representing external
memory locations an index at queueRequest() time. The index is used to
identify the memory buffer to be queued to the video device once the
buffer will be queued in a Request.
In order to minimize relocations in the V4L2 backend, this method
provides a best-effort caching mechanisms that attempts to reuse
BufferMemory previously mapped to the buffer's dmabuf file descriptors,
if any.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Buffer instances reference memory, which is modelled internally by a
BufferMemory instance. Store a pointer to the BufferMemory in the Buffer
class, and populate it when the buffer is queued to the camera through a
request. This is useful for applications to access the buffer memory in
the buffer or request completion handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In addition to referencing buffer memory by index, add support to
referencing it using dmabuf file descriptors. This will be used to
reference buffer memory allocated outside of libcamera and import it.
The dmabuf file descriptors are stored in an array in the Buffer class,
and a new Stream::createBuffer() overload is added to construct a buffer
from dmabuf file descriptor.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Define the memory type a Stream uses and allow application to set it
through the associated StreamConfiguration.
A Stream can use either internal or external memory allocation methods,
depending on where the data produced by the stream is actually saved.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All interactions with the Stream's buffers currently go through the
BufferPool. In order to shorten accessing the buffers array, and eventually
restrict access to the Stream's internal buffer pool, provide operations to
access, create and destroy buffers.
It is still possible to access the pool for pipeline handlers to
populate it by exporting buffers from a video device to Stream's pool.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When stopping the stream buffers have been queued, in which case their
completion is never be notified to the user. This can lead to memory
leaks. Fix it by notifying completion of all queued buffers with the
status set to error.
As a result the base PipelineHandler implementation can be simplified,
as all requests complete as the result of stopping the stream. The
stop() method that manually completes all queued requests isn't needed
anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Buffer class is a large beast the stores information about the
buffer memory, dynamic metadata related to the frame stored in the
buffer, and buffer reference data (in the index). In order to implement
buffer import we will need to extend this with dmabuf file descriptors,
making usage of the class even more complex.
Refactor the Buffer class by splitting the buffer memory information to
a BufferMemory class, and repurposing the Buffer class to reference a
buffer and to store dynamic metadata. The BufferMemory class becomes a
long term storage, valid and stable from the time buffer memory is
allocated to the time it is freed. The Buffer class, on the other hand,
becomes transient, is created on demand when an application requires a
buffer, is given to a request, and is deleted when the request
completes.
Buffer and BufferMemory don't need to be copied, so their copy
constructor and assignment operators are deleted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Applications often have to map requests queued to a camera to external
resources. To make this easy, add a 64-bit integer cookie to the Request
class that is set when the request is created and can be retrieved at
any time, especially in the request completion handler. The cookie is
completely transparent for libcamera and is never modified.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a field to IPAModuleInfo to contain the license of the module.
This license field will be used to determine whether the IPA module
should be run in an isolated process or not. If the license is open
source, then the IPA module will be allowed to run without process
isolation, if the user enables it. If the license is not open source,
then the IPA module will be run with process isolation.
Update the dummy IPA and IPA test to conform to the new struct layout.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently the log file and the log level can only be set via environment
variables, but applications may also want to set the log file and the
log level at run time. Provide an API for this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
gcc complains that the recently template specialisation of the
SlotBase::match() method is invalid as it is in a non-namespace scope.
Luckily this can easily be fixed by removing the specialisation for the
fully specialised implementation. As an additional safety measure, using
std::enable_if<!std::is_same<Object, T>> on the template implementation
ensures that it will never be called for an Object instance.
Fixes: 56c2e653008a ("libcamera: signal: Fix Object handling in multiple inheritance cases")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The SlotBase implementation stores the receiver object pointer as a void
pointer internally. The pointer is then cast back to an Object pointer
when the receiver object class derives from Object. When the receiver is
an object that inherits from both the Object class and other classes,
the Object data members may not be stored at the beginning of the object
memory. The cast back to an Object pointer is thus incorrect.
Fix this by casting the receiver object pointer to an Object pointer
where the type of the receiver object is known, and pass it along with
the receiver void pointer to the SlotBase class. The SlotBase class
stores both pointers internally, and doesn't need the isObject_ field
anymore as the same information is obtained from checking if the Object
pointer is null.
To avoid confusing the two pointers, use the same naming scheme through
the whole implementation: "obj" points to a receiver object as an
unknown type, and "object" to the receiver object cast to an Object. The
latter is null when the receiver object doesn't inherit from the Object
class.
To further clarify the code, remove direct access to the SlotBase "obj"
and "object" fields as much as possible. They are replaced by two new
methods :
- SlotBase::disconnect() to disconnect a signal from the slot's receiver
object
- SlotBase::match() to test if an object pointer matches the slot
The match() method is a template method with a specialisation for the
Object type, to compare either the obj or the object pointer depending
on the type of the parameter. This is required as the Object destructor
calls the SignalBase::disconnect() method for signal connected to the
object, and passes a pointer to Object to that method, while the actual
object may have a different address due to the issue explained above.
The pointer must thus be compared with the stored Object pointer in that
case, not to the pointer to the receiver object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow signals to cross thread boundaries by posting them to the
recipient through messages instead of calling the slot directly when the
recipient lives in a different thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Create a new Message class to model a message that can be passed to an
object living in another thread. Only an invalid message type is
currently defined, more messages will be added in the future.
The Thread class is extended with a messages queue, and the Object class
with thread affinity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The new Thread class wraps std::thread in order to integrate it with the
Object, Signal and EventDispatcher classes. By default new threads run
an internal event loop, and their run() method can be overloaded to
provide a custom thread loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit b817bcec6b53 ("libcamera: Auto generate version information")
generates version information in order to automatically include it
various locations (Sphinx and Doxygen documentation, libcamera::version
variable available at runtime, and version.h available at compile time).
Unfortunately this causes lots of unnecessary rebuilds when modifying
the git tree state, which hinders development.
The problem is caused by the generated version.h being listed as a
dependency for the whole libcamera. This is required as meson (to the
best of my knowledge) doesn't provide a way to explicitly specify the
dependency of a single object file (camera_manager.o in this case, as
camera_manager.cpp is the only consumer of the generated version string)
on the custom target used to generate version.h. The dependency can't be
automatically detected at build time, like dependencies on normal
headers that are generated by parsing the source, because the version.h
header may not exist yet. The build could then fail in a racy way.
This change attempts at solving the issue by generating a version.cpp
instead of a version.h to set the git-based version. This minimises the
number of files that need to be rebuild when then git tree state
changes, while retaining the main purpose of the original automatic
version generation, the ability to access the git-based version string
at runtime. We however lose the ability to access git-based version
information at build time in an application building against libcamera,
but there is no expected use case for this.
The version string is moved from the libcamera namespace to the
CameraManager class in order to avoid including version.h inside
libcamera (in version.cpp and in camera_manager.cpp), which would create
dependencies causing more rebuild steps, as described above.
On the other hand, major, minor and patch level version numbers are
useful at build time. This commit changes the generation of version.h in
order to add three macros named LIBCAMERA_VERSION_MAJOR,
LIBCAMERA_VERSION_MINOR and LIBCAMERA_VERSION_PATCH for this purpose.
version.h is not included by any other libcamera header or source file,
and thus doesn't force a rebuild of the library.
The Sphinx and Doxygen documentation keep their git-based version
information, which is set during the configuration of the build and then
doesn't track git commits. We may want to investigate how to improve
this, but given that git-based version for the documentation has very
few use cases outside of tagging nightly builds, this isn't considered
an issue at the moment.
The documentation install directory now uses the base version string, in
order to avoid increasing the number of documentation directories
needlessly. This shouldn't cause any issue as the API should not change
without a change to the version number.
The version number generation and handling code now also standardises
the version variables to not start with a 'v' prefix in meson, in order
to simplify their handling. The prefix is added when generating the
relevant files.
Note that we go back to specifying the fallback version in the main
meson.build, in the call to the project() function. For the time being I
believe this should be a good compromise to avoid unnecessary
recompilation, and moving the fallback version to a different file for
tarball releases can be built on top of this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Generate a version string, and provide a global string object which
allows applications to interrogate the current libcamera version
information.
The version header is automatically updated by meson on each build.
The string roughly follows the semver [0] conventions of
major.minor.patch-label as a value.
[0] https://semver.org/
A script (utils/gen-version.sh) is provided which is modelled upon the
processing from autoconf's git-version-gen. The gen-version.sh script
will look for tags in the form vX.Y as starting points for the version
string. While the repository does not have any matching tags, v0.0 will
be assumed, resulting in versions with both major and minor being set to
'0', and the patch count resulting from the number of patches in the
history to that point.
Finally, a uniquely identifying shortened hash is provided from git:
v0.0.509+0ec0edf7
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
IPA modules must be implemented in C++, which means we no longer need
__cplusplus guards, so remove them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an initial set of controls to demonstrate how controls are defined.
Proper documentation for each control is missing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide a ControlList on request objects to facilitate setting controls.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlList class implements a map from control specifier to control
ID. To avoid constant lookups of ControlInfo when using the class in the
libcamera core or in pipeline handlers, the map uses ControlInfo
pointers instead of ControlId values. This is however not very
convenient for applications or pipeline handlers, as they would be
forced to first look up the ControlInfo pointers for the controls they
want to access. Facilitate ease of use of ControlLists by implementing
an internal lookup of the ControlInfo from the controls provided by the
Camera.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Extend the Camera class to expose the controls it supports. Each
pipeline should generate a list of controls supported by each camera it
creates. These are represented by a ControlInfoMap, and an associated
ControlList of default values.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a set of data types to support controls:
- ControlValue stores a control type and value in a generic way
- ControlId enumerates all the control identifiers
- ControlIdentifier declares the types of a control and map their names
- ControlInfo stores runtime information for controls
- ControlList contains a set of control info and value pairs
The control definitions map is generated from the controls documentation
to ensure that the two will always be synchronised.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
If a timer is running while it's deleted it is still register with the
event dispatcher. This causes a segmentation fault when the timer
time-out and its signal is emitted. Fix this my stopping the timer when
it's deleted.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The files() function generates a variable with the location of the
referenced files.
This is shorter than joining the current_source_dir() of which use is
somewhat frowned upon.
Fixes: 90de3690c456 ("libcamera: Auto-generate libcamera.h")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation of creating a new V4L2Device base class, rename
V4L2Device to V4L2VideoDevice.
This is a project wide rename without any intended functional change.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow StreamFormats to be associated to a StreamConfiguration. The
intention is that pipeline handlers should associate formats to a
StreamConfiguration when it's created in generateConfiguration().
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a StreamFormats class which describes all the formats supported by a
stream. The object does not collect any information itself but can
simplify user interactions with formats as it's able to translate a
stream format range into a discrete list and a discrete list to a range.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method to check if a Size can fit inside a SizeRange. When
determining if a size is containable take step values into account if
they are not set to 0.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's useful to be able to print a string representation of a SizeRange
to the log or console, add a toString() method. While at it turn the
structure into a class as it contains functions as well as data.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The size range described might be subject to certain step
limitations. Make it possible to record this information.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SizeRange can describe a single size where min == max. Add a
constructor to help create such a description.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need a way to match pipelines with IPA modules, so add fields in
IPAModuleInfo to hold the IPA module API version number, the pipeline
name, and the pipeline version.
The module API version is used to determine the layout of struct
IPAModuleInfo.
Also update IPA module tests and Doxygen accordingly. Doxygen needs to
be updated to accomodate __attribute__((packed)).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
