| Age | Commit message (Collapse) | Author |
|---|
|
The V4L2SubdeviceFormat::bitsPerPixel() function is just a wrapper
around a MediaBusFormatInfo lookup. It made sense when the
MediaBusFormatInfo class was not exposed outside of the compilation
unit, but is now redundant. Drop it and use MediaBusFormatInfo in the
only caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Not all media bus formats describe image formats. Extend the
MediaBusFormatInfo class with a type member to indicate if the format
corresponds to image data or metadata, and add the (only) metatdata
format supported by the kernel to the known mediaBusFormatInfo.
The kernel doesn't (yet) have any metadata format specific to sensor
embedded data. This is being addressed in the V4L2 API. In preparation
for embedded data support, already introduce the EmbeddedData type here.
Corresponding formats will be added when available.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2SubdeviceFormatInfo structure, internal to the
v4l2_subdevice.cpp compilation unit, contains information about media
bus formats that will be useful in other parts of libcamera. To prepare
for this, expose the structure in the v4l2_subdevice.h header and turn
it into a class with a similar design as PixelFormatInfo.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is useful in many cases although not included in the stl.
Note: This is an ABI incompatible change.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
C++23 has a std::to_underlying() helper function that converts an
enumeration value to its underlying type. Add a compatible
implementation to the libcamera::utils namespace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Patches have been posted to the linux-media@vger.kernel.org mailing list
to add i.MX8MP support to the rkisp1 driver ([1]). As no changes are
expected to the userspace API in future versions of the series, add the
RKISP1_V_IMX8MP version manually to the rkisp1-config.h header already.
Once the patches get merged in the kernel, the changes will trickle down
to libcamera with the next kernel headers update.
[1] https://lore.kernel.org/linux-media/20240216095458.2919694-1-paul.elder@ideasonboard.com/
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Several functions in libcamera classes are marked as thread-bound,
restricting the contexts in which those functions can be called. There
is no infrastructure to enforce these restrictions, causing difficult to
debug race conditions when they are not met by callers.
As a first step to solve this, add an assertThreadBound() protected
function to the Object class to test if the calling thread context is
valid, and use it in member functions of Object subclasses marked as
thread-bound. This replaces manual tests in a few locations.
The thread-bound member functions of classes that do not inherit from
Object are not checked, and neither are the functions of classes marked
as thread-bound at the class level. These issue should be addressed in
the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The signal.h header doesn't need to include object.h. Replace it with a
forward declaration, and instead include object.h in source files that
require it. It can speed up compilation a little bit, but more
importantly avoids unintended dependencies from the Signal class to the
Object class to be added later as the compiler will catch them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Update kernel headers to v6.7 using utils/update-kernel-headers.sh
and re-instating libcamera local modifications.
The V4L2_SUBDEV_CAP_MPLEXED flag has been renamed to
V4L2_SUBDEV_CAP_STREAMS in the upstream streams API. Adapt the code base
accordingly. The flag's numerical value hasn't changed, there is no ABI
breakage introduced by the API update.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific
vendor controls.
Define a control StatsOutputEnable to allow the ISP hardware statistics
to be output through metadata via the Bcm2835StatsOutput control. The
implementation of these controls will follow in a subsequent patch.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Label draft controls and properties through the "draft" vendor tag
and deprecate the existing "draft: true" mechanism. This uses the new
vendor tags mechanism to place draft controls in the same
libcamera::controls::draft namespace and provide a defined control id
range for these controls. This requires moving all draft controls from
control_ids.yaml to control_ids_draft.yaml.
One breaking change in this commit is that draft control ids also move
to the libcamera::controls::draft namespace from the existing
libcamera::controls namespace. This is desirable to avoid API breakages
when adding new libcamera controls. So, for example, the use of
controls::NOISE_REDUCTION_MODE will need to be replaced with
controls::draft::NOISE_REDUCTION_MODE.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ranges.yaml file that is used to reserve control id
ranges/offsets for libcamera and vendor specific controls. This file is
used by the gen-controls.py script to generate control id values for
each control.
Draft controls now have a separate range from core libcamera controls,
breaking the existing numbering behaviour.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add support for using separate YAML files for controls and properties
generation. The mapping of vendor/pipeline handler to control file is
done through the controls_map variable in include/libcamera/meson.build.
This simplifies management of vendor control definitions and avoids
possible merge conflicts when changing the control_ids.yaml file for
core and draft controls. With this change, libcamera and draft controls
and properties files are designated the 'libcamera' vendor tag.
In this change, we also rename control_ids.yaml -> control_ids_core.yaml
and property_ids.yaml -> property_ids_core.yaml to designate these as
core libcamera controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The template file to the gen-controls.py and gen-py-controls.py is now
passed in through the '-t' or '--template' command line argument instead
of being a positional argument. This will allow multiple input files to
be provided to the scripts in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for vendor-specific controls and properties to libcamera.
The controls/properties are defined by a "vendor" tag in the YAML
control description file, for example:
vendor: rpi
controls:
- MyExampleControl:
type: string
description: |
Test for libcamera vendor-specific controls.
This will now generate a control id in the libcamera::controls::rpi
namespace, ensuring no id conflict between different vendors, core or
draft libcamera controls. Similarly, a ControlIdMap control is generated
in the libcamera::controls::rpi namespace.
A #define LIBCAMERA_HAS_RPI_VENDOR_CONTROLS is also generated to allow
applications to conditionally compile code if the specific vendor
controls are present. For the python bindings, the control is available
with libcamera.controls.rpi.MyExampleControl. The above controls
example applies similarly to properties.
Existing libcamera controls defined in control_ids.yaml are given the
"libcamera" vendor tag.
A new --mode flag is added to gen-controls.py to specify the mode of
operation, either 'controls' or 'properties' to allow the code generator
to correctly set the #define string.
As a drive-by, sort and redefine the output command line argument in
gen-controls.py and gen-py-controls.py to ('--output', '-o') for
consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the transformFromOrientation() function isn't used outside of
transform.cpp, make it static to remove it from the public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The transformToOrientation() function is called from
Orientation operator*(const Orientation &o, const Transform &t);
only. Fold the code in the caller and drop the transformToOrientation()
function to drop what can be considered as an ill-defined operation from
the API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The cached rotationTransform_ value is used in computeTransform() only,
to compute the mounting orientation. Cache the mounting orientation
instead, removing the need for the intermediate conversion of the
rotation to a transform.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Replace the usage of CameraConfiguration::transform with the newly
introduced CameraConfiguration::orientation.
Rework and rename the CameraSensor::validateTransform(transform) to
CameraSensor::computeTransform(orientation), that given the desired
image orientation computes the Transform that pipeline handlers should
apply to the sensor to obtain it.
Port all pipeline handlers to use the newly introduced function.
This commit breaks existing applications as it removes the public
CameraConfiguration::transform in favour of
CameraConfiguration::orientation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two operations that allows to combine Transform with Orientation.
- Transform operator/(const Orientation &o1, const Orientation &o2)
allows to easily get back the Transform that needs to be applied to
Orientation2 to get Orientation1
- Orientation operator*(const Orientation &o, const Transform &t)
allows to apply a Transform to an Orientation and obtain the
combination of the two
These two operations allow applications to use Transforms to
manipulate the Orientation inside the CameraConfiguration, if they
wish.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two helper functions to the transform.cpp file that allows to
convert to and from an Orientation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce the Orientation enumeration which describes the possible 2D
transformations that can be applied to an image using two basic plane
transformations.
Add to the CameraConfiguration class a new member 'orientation' which is
used to specify the image orientation in the memory buffers delivered to
applications.
The enumeration values follow the ones defined by the EXIF specification at
revision 2.32, Tag 274 'orientation'.
The newly introduced field is meant to replace
CameraConfiguration::transform which is not removed yet not to break
compilation.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The rotationTransform_ depends on a V4L2 control whose value does not
change for the whole lifetime of the camera.
Instead of re-calculating it everytime the camera is configured, cache
it at properties initialization time.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the existing meson scripts, an IPA mojom interface file may not be
built if:
- There are duplicate entries for the mojom file shared by different
pipeline handlers in pipeline_ipa_mojom_mapping, and
- The IPA is not listed first in pipeline_ipa_mojom_mapping, and
- The first listed IPA for the given mojom file is not selected in the
build.
Fix this by using a separate list of already built mojom files
(mojoms_built) instead of overloading use of the existing
ipa_mojom_files list. Now, ipa_mojom_files gets filled in outside of
the IPA list enumeration loop, this also guarantees the IPA
documentation gets built even if the pipeline is not selected.
Fixes: 312e9910ba2e ("meson: ipa: Add mapping for pipeline handler to mojom interface file")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the PiSP Frontend and Backend SharedMemObject file descriptors to
the ipa::init() call. This will allow the pipeline handler to pass these
objects to the IPA after construction.
Add a flag to indicate if buffer swaps are needed when starting the
ISP for the stitch block.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a class function to the CameraSensor class to apply a full
configuration to the sensor.
The configuration shall be fully populated and shall apply without
modifications to the sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce SensorConfiguration in the libcamera API.
The SensorConfiguration is part of the CameraConfiguration class
and allows applications to control the sensor settings.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraManager::get(dev_t) implementation was provided only for the
V4L2 Adaptation layer. This has now been replaced with the use of the
public SystemDevices property.
Remove the deprecated function entirely, along with the camerasByDevnum_
map which was only used to support this functionality.
This is a clear (and intentional) breakage in both the API and ABI.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The meson style, which libcamera follows, recommends a space before
colons in function parameters. Fix the style violations through the
project.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When packaging libcamera, distributions may break IPA module signatures
if the packaging process strips binaries. This can be fixed by resigning
the modules, but the process is error-prone.
Add a command line ipa-verify utility that tests the signature on an IPA
module to help packagers. The tool takes a single argument, the path to
an IPA module shared object, and expects the signature file (.sign) to
be in the same directory.
In order to access the public key needed for signature verification, add
a static function to the IPAManager class. As the class is internal to
libcamera, this doesn't affect the public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Now that `Camera::generateConfiguration()` takes a `libcamera::Span`
of `StreamRole`, remove the `StreamRoles` type, which was an alias
to `std::vector<libcamera::StreamRole>`.
The removal has two reasons:
- it is no longer strictly necessary,
- its presence may suggest that that is the preferred (or correct)
way to build/pass a list of `StreamRole`.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix small checkstyle report on roles initialiser]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change the parameter type of `generateConfiguration()` from `const std::vector&`
to `libcamera::Span`. A span is almost always preferable to a const vector ref
because it does not force dynamic allocation when none are needed, and it allows
any contiguous container to be used.
A new overload is added that accepts an initializer list so that
cam->generateConfiguration({ ... })
keeps working.
There is no API break since a span can be constructed from a vector
and the initializer list overload takes care of the initializer lists,
but this change causes an ABI break.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Apply checkstyle fixups]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Split the public and private headers from the base library and stop installing
private headers as part of the install process.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera thread annotations are for internal use only and are
not part of any public API. Mark the header accordingly by including the
private.h header guard.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Register the identified device numbers with each camera as the
SystemDevices property.
This facilitates camera daemons or other systems to identify which
devices are being managed by libcamera, and can prevent duplication of
camera resources.
As the SystemDevices property now provides this list of devices, use it
directly from within the CameraManager when adding a Camera rather than
passing it through the internal API.
Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraManager exposes addCamera and removeCamera as public API
calls, while they should never be called from an application. These
calls are only expected to be used by PipelineHandlers to update the
CameraManager that a new Camera has been created and allow the Camera
Manager to expose it to applications.
Remove the public calls and update the private implementations such that
they can be used directly by the PipelineHandler through the internal
CameraManager::Private provided by the Extensible class.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraManager makes use of the Extensible pattern to provide an
internal private implementation that is not exposed in the public API.
Move the Private declaration to an internal header to make it available
from other internal components in preperation for reducing the surface
area of the public interface of the CameraManager.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
The internal/request.h was missed at the time of the original
conversion. Update it.
Fixes: df131ad08893 ("libcamera: internal: Convert to pragma once")
Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In addition to sensor controls, return lens controls from
IpaBase::configure() back to the pipeline handler. If there are lens
controls present in the ControlList, action them in the pipeline handler
as part of the configure routine.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not advertise colour related controls (i.e. [A]WB, colour saturation)
in the ControlInfoMap of available controls returned out to the
application.
Silently ignore these controls in the control handler in case applications
don't use the advertised ControlInfoMap to validate controls.
As a drive-by fix, don't advertise controls::ColourCorrectionMatrix in
the ControlInfoMap as it is not handled by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new cfaPattern field to the IPACameraSensorInfo to pass the
CFA/Bayer pattern for the current sensor configuration to the IPA.
This field takes a value from properties::draft::ColorFilterArrangementEnum.
Populate cfaPattern in CameraSensor::sensorInfo(), called by the
pipeline handler before it calls ipa->init() and ipa->config().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Restructure the IPA mojom interface to be more consistent in the use
of the API. Function parameters are now grouped into *Params structures
and results are now returned in *Results structures.
The following pipeline -> IPA interfaces have been removed:
signalQueueRequest(libcamera.ControlList controls);
signalIspPrepare(ISPConfig data);
signalStatReady(uint32 bufferId, uint32 ipaContext);
and replaced with:
prepareIsp(PrepareParams params);
processStats(ProcessParams params);
signalQueueRequest() is now encompassed within prepareIsp().
The following IPA -> pipeline interfaces have been removed:
runIsp(uint32 bufferId);
embeddedComplete(uint32 bufferId);
statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls);
and replaced with the following async calls:
prepareIspComplete(BufferIds buffers);
processStatsComplete(BufferIds buffers);
metadataReady(libcamera.ControlList metadata);
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Split the Raspberry Pi pipeline handler and IPA source code into common
and VC4/BCM2835 specific file structures.
For the pipeline handler, the common code files now live in
src/libcamera/pipeline/rpi/common/
and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/.
For the IPA, the common code files now live in
src/ipa/rpi/{cam_helper,controller}/
and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the
camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/.
To build the pipeline and IPA, the meson configuration options have now
changed from "raspberrypi" to "rpi/vc4":
meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow an arbitrary mapping between the pipeline handler and IPA mojom
interface file in the build system. This removes the 1:1 mapping of
pipeline handler name to mojom filename, and allows more flexibility to
pipeline developers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a function to the CameraSensor class that allows to test a format
without applying it to the subdevice and without modifying any control
value associated with the camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an explicit helper function setCameraTimeout() in the pipeline
handler to set the Unicam timeout value. This function is signalled from
the IPA to set up an appropriate timeout. This replaces the
maxSensorFrameLengthMs value parameter returned back from
IPARPi::start().
Adjust the timeout to be 5x the maximum frame duration reported by the
IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To add buffer_handle_t access in android, this patch allows inheritance
of FrameBuffer to add a derived class in android.
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at
setFormat()") extended the CameraSensor::setFormat() function
to apply vertical/horizontal flips on the sensor based on the
supplied Transform. To pass the Transform to the function the
V4L2SubdeviceFormat structure has been augmented with a Transform
member.
However as the newly added Transform is not used at all in the
V4L2Subdevice class, it should not be part of V4L2SubdeviceFormat.
Fix that by removing the transform field from V4L2SubdeviceFormat
and pass it as an explicit parameter to CameraSensor::setFormat().
Fixes: 6f6e1bf704fe ("libcamera: camera_sensor: Apply flips at setFormat())
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera uses double quotes "..." for #include directives for
internal headers.
While at it, move the request internal header include to the right
location.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new helper function PipelineHandler::configurationFile() that returns
the full path of a named configuration file. This configuration file may be read
by pipeline handlers for platform specific configuration parameters on
initialisation.
The mechanism for searching for the configuration file is similar to the IPA
configuration file:
- In the source tree if libcamera is not installed
- Otherwise in standard system locations (etc and share directories).
When stored in the source tree, configuration files shall be located in a 'data'
subdirectory of their respective pipeline handler directory.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
