summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-25Documentation: application-developer: Fix up spelling errorKieran Bingham
Fix a minor spelling error. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-25Documentation: application-developer: Fix reference to cam BufferWriterKieran Bingham
The BufferWriter class has been replaced by the FileSink. Adapt the reference, to match the source code. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-25Documentation: application-developer: Recommend unique_ptr for CameraManagerKieran Bingham
The CameraManager object should be deleted when it is no longer used to prevent it from leaking. When the application closes, the memory will be released, but it would show up in reports from memory validation tools such as valgrind if not handled correctly. Recommend best-practices in the guide and ensure it is automatically cleaned up when the CameraManager goes out of scope. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-25Documentation: application-developer: Clean up build instructionsKieran Bingham
The build and run instructions read as if meson is the only way to compile the application. Although this is recommended, it is not required - adapt the language to fit better. While here, fix the naming of the simple_cam meson object to match the other usages of 'simple-cam'. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-25Documentation: application-developer: Remove irrelevant TODOKieran Bingham
This TODO has no real meaning, and isn't an action. Remove it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-25README.rst: Update gstreamer element guidanceKieran Bingham
The Gstreamer gstlibcamerasrc element operates better with the glimagesink, as it can perform direct renders or hardware accellerated image format conversion. Further extend the sample commands to demonstrate how to specify a fixed width and height parameter to the pipeline. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-23libcamera: controls: Initialize ControlInfoMap::idmap_Jacopo Mondi
The compiler generated constructor does not initialize the ControlInfoMap::idmap_ field. Fix this by explicitly initializing the field in the class declaration. Reported-by: Coverity CID=354657 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-23ipa: ipu3: awb: remove local storage of the gridJean-Michel Hautbois
The IPASessionConfiguration now has the grid configuration stored. Use it it at prepare() and process() calls in AWB and pass it as a reference to the private functions when needed. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-23ipa: ipu3: agc: remove local storage of the gridJean-Michel Hautbois
The IPASessionConfiguration now has the grid configuration stored. Use it at process() call in AGC and pass it as a reference to the private functions when needed. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-21Documentation: Drop deprecated Doxygen optionsLaurent Pinchart
The Doxygen LATEX_SOURCE_CODE, RTF_SOURCE_CODE and DOCBOOK_PROGRAMLISTING options are deprecated, and generate warnings with the Doxygen's master branch. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-21qcam: Replace MappedBuffer with Span<uint8_t>Laurent Pinchart
The MappedBuffer structure is a custom container that binds a data pointer with a length. This is exactly what Span is. Use it instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-20ipa: ipu3: Move IPU3 agc into algorithmsJean-Michel Hautbois
Now that the interface is properly used by the AGC class, move it into ipa::ipu3::algorithms and let the loops do the calls. As we need to exchange the exposure_ and gain_ by passing them through the FrameContext, use the calculated values in setControls() function to ease the reading. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: Move IPU3 awb into algorithmsJean-Michel Hautbois
Now that the interface is properly used by the AWB class, move it into ipa::ipu3::algorithms and let the loops do the calls. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: convert AGC to the new algorithm interfaceJean-Michel Hautbois
In preparation for using the AGC through the new algorithm interfaces, convert the existing code to use the new function types. Now that the process call is rewritten, re-enable the compiler flag to warn when a function declaration hides virtual functions from a base class (-Woverloaded-virtual). We never use converged_ so remove its declaration. The controls may not need to be updated at each call, but it should be decided on the context side and not by a specific call by using a lock status in the Agc structure for instance. As the params_ local variable is not useful anymore, remove it here too. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: convert AWB to the new algorithm interfaceJean-Michel Hautbois
When the stats are received, pass them with the context to the existing AWB algorithm. IPAFrameContext now has a new structure to store the gains calculated by the AWB algorithm. When an EventFillParams event is received, call prepare() and set the new gains accordingly in the params structure. There is no more a need for the IPU3Awb::initialise() function, as the params are always set in prepare(). Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: Introduce a modular tone mapping algorithmJean-Michel Hautbois
Introduce a new algorithm to manage the tone mapping handling of the IPU3. The initial algorithm is chosen to configure the gamma contrast curve which moves the implementation out of AWB for simplicity. As it is initialised with a default gamma value of 1.1, there is no need to use the default table at initialisation anymore. This demonstrates the way to use process() call when the EventStatReady comes in. The function calculates the LUT in the context of a frame, and when prepare() is called, the parameters are filled with the updated values. AGC is modified to take the new process interface into account. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: Introduce modular algorithmJean-Michel Hautbois
Implement a new modular framework for algorithms with a common context structure that is passed to each algorithm through a common API. This patch: - removes all the local references from IPAIPU3 and uses IPAContext - implements the list of pointers and the loop at configure call on each algorithm - loops in fillParams on each prepare() call on the algorithm list - loops in prepareStats on each process() call on the algorithm list Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: Add the functions to the Algorithm classJean-Michel Hautbois
Introduce three functions in the Algorithm class to manage algorithms: - configure which is called when IPA is configured only - prepare called on EventFillParams event at each frame when the request is queued - process called on EventStatReady event at each frame completion when the statistics have been generated. The existing AGC implementation already has a function named process(), though it has different arguments. Adding the new virtual process() interface causes a compiler warning due to the AGC implementation overloading a virtual function, even though the overload can be resolved correctly. Temporarily disable the warning in this commit to maintain bisection until the AGC is converted to the new interface. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: ipu3: Introduce a Context structureJean-Michel Hautbois
An increasing amount of data and information needs to be shared between the components that build up to implement image processing algorithms. Create a context structure which will allow us to work towards calling algorithms in a modular way, and sharing information between the modules. The IPA context is a global context set at configure time (IPASessionConfiguration) and a per-frame context (IPAFrameContext) used while streaming. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-20ipa: move libipa::Algorithm to ipa/ipu3/algorithmsJean-Michel Hautbois
The abstract Algorithm class was originally placed in libipa as an attempt define a generic algorithm container. This was a little optimistic and pushed a bit far too early. Move the Algorithm class into the IPU3 which is the only user of the class, as we adapt it to support modular algorithm components for the IPU3. Not documenting the namespace may cause issues with Doxygen in libipa. The file libipa.cpp is thus created as an empty file for now, but we can leverage it in the future to add more global libipa documentation, and possibly code too. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-19libcamera: ipc_pipe: Do not run memcpy with null argumentsUmang Jain
IPCMessage::payload() converts the IPCMessage into an IPCUnixSocket payload. However, if IPCMessage is constructed with one of the following constructors - IPCMessage::IPCMessage(), IPCMessage::IPCMessage(uint32_t cmd) IPCMessage::IPCMessage(const Header &header) The data_ vector of IPCMessage is empty and uninitialised. In that case, IPCMessage::payload will try to memcpy() an empty data_ vector which can lead to invoking memcpy() with a nullptr parameter, which is then identified by the address sanity checker.. Add a non-empty data_ vector check to avoid it. The issue is noticed by running a test manually, testing the vimc IPA code paths in isolated mode. It is only noticed when the test is compiled with -Db_sanitize=address,undefined meson built-in option. ipc_pipe.cpp:110:8: runtime error: null pointer passed as argument 2, which is declared to never be null Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-19libcamera: ipc_unixsocket: Do not run memcpy with null argumentsUmang Jain
In IPCUnixSocket, a payload can be sent/received with empty fd vector, which leads to passing a nullptr in memcpy() in both sendData() and recvData(). Add a null check for fd vector's data pointer to avoid invoking memcpy() with nullptr. The issue is noticed by running a test manually testing the vimc IPA code paths in isolated mode. It is only noticed when the test is compiled with -Db_sanitize=address,undefined meson built-in option. ipc_unixsocket.cpp:268:8: runtime error: null pointer passed as argument 2, which is declared to never be null ipc_unixsocket.cpp:312:8: runtime error: null pointer passed as argument 1, which is declared to never be null Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-19ipa: Use FileDescriptor instead of int in layers above IPC payloadPaul Elder
Regarding (de)serialization in isolated IPA calls, we have four layers: - struct - byte vector + fd vector - IPCMessage - IPC payload The proxy handles the upper three layers (with help from the IPADataSerializer), and passes an IPCMessage to the IPC mechanism (implemented as an IPCPipe), which sends an IPC payload to its worker counterpart. When a FileDescriptor is involved, previously it was only a FileDescriptor in the first layer; in the lower three it was an int. To reduce the risk of potential fd leaks in the future, keep the FileDescriptor as-is throughout the upper three layers. Only the IPC mechanism will deal with ints, if it so wishes, when it does the actual IPC. IPCPipeUnixSocket does deal with ints for sending fds, so the conversion between IPCMessage and IPCUnixSocket::Payload converts between FileDescriptor and int. Additionally, change the data portion of the serialized form of FileDescriptor to a 32-bit unsigned integer, for alightnment purposes and in preparation for conversion to an index into the fd array. Also update the deserializer of FrameBuffer::Plane accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-19test: camera: Camera reconfiguration and fd-leak testUmang Jain
Development and usage of isolated IPA's has identified bugs in the transmission of the file descriptors between the pipeline handler and the IPA through. Add tests to identify these bugs and prevent regressions. This tests basically checks for two things: - Camera reconfigurations without stopping CameraManager - Fd leaks across IPA IPC boundary [1] Currently, it uses vimc, but can be easily changed to using another platform (for e.g. IPU3) by changing kCamId_ and kIpaProxyName_. The test performs kNumOfReconfigures_ (currently set to 10) reconfigurations of the camera. Each reconfiguration runs start(), capture(100ms), stop() of the camera. Hence, the test runs approximately for 1 second. For checking the fd leaks, the test monitors the /proc/$PROXY_PID/fd directory for open fds. It compares the number of open fds after each run to the number of open fds before the first run. If those two are found to be mis-matched, the test shall report failure. The test validates IPA IPC code paths which are used when the IPA is run in isolated mode. The CameraTest is constructed with the isolate flag set to enforce this. [1] https://bugs.libcamera.org/show_bug.cgi?id=63 Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-19libtest: camera_test: Plumb constructor to set LIBCAMERA_IPA_FORCE_ISOLATIONUmang Jain
Some tests might require to have LIBCAMERA_IPA_FORCE_ISOLATION set to ensure they can test the IPA running in isolated mode. These tests are likely to leverage CameraTest. The environment variable should be set before CameraManager::start() call which happens in CameraTest's constructor. Hence, plumb the constructor with a flag so that the LIBCAMERA_IPA_FORCE_ISOLATION can be set before CameraManager::start(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-18utils: ipc: ipa_proxy_worker: Log IPCUnixSocket::send() failuresLaurent Pinchart
The IPCUnixSocket::send() function may fail, in which case it can be useful for debugging to log an error message that tells which event was affected. Do so. Reported-by: Coverity CID=35483[6-9] Reported-by: Coverity CID=35484[01] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17ipa: raspberrypi: Fix bcm2835-isp inclusion type.Kieran Bingham
The bcm2835-isp.h is included with quotes rather than angle brackets. Quoted includes is reserved for internal includes, while the linux/bcm2835-isp.h header is exported from the Linux kernel. Fix the inclusion type. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17pipeline: ipu3: Skip recording timestamp for cancelled buffersUmang Jain
There is no point in recording sensor's timestamp when V4L2VideoDevice has marked the frame buffers with FrameMetadata::FrameCancelled (happens when the streams are stopped). The metadata is mostly invalid for cancelled buffers hence, setting timestamp on invalid metadata does not make sense (however some metadata can be considered valid for e.g. returning cause of failure through metadata on cancelled buffers). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-17libcamera: pipeline: Cast to derived pipeline handler with helpersLaurent Pinchart
Replace manual static casts from the PipelineHandler pointer to a derived class pointer with helper functions in the camera data classes. This simplifies code accessing the pipeline from the camera data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17libcamera: pipeline_handler: Drop controls() and properties() functionsLaurent Pinchart
The PipelineHandler controls() and properties() functions are only used by the Camera class. Now that the controls and properties are stored in the Camera::Private class, we can drop those functions and access the private data directly in Camera::controls() and Camera::properties(). Suggested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17Documentation: guides: pipeline-handler: Migrate to Camera::PrivateLaurent Pinchart
Update the pipeline handler guide following the migration from the CameraData class to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline_handler: Drop CameraData classLaurent Pinchart
The CameraData class isn't used anymore. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: ipu3: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: raspberrypi: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: rkisp1: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: vimc: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: pipeline: uvcvideo: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: pipeline: simple: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16libcamera: camera: Fix minor issues in Camera::Private documentationLaurent Pinchart
Improve the Camera::Private documentation by fixing minor spelling or style issues. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16libcamera: pipeline_handler: Move CameraData members to Camera::PrivateLaurent Pinchart
With pipeline handlers now being able to subclass Camera::Private, start the migration from CameraData to Camera::Private by moving the members of the base CameraData class. The controlInfo_, properties_ and pipe_ members are duplicated for now, to allow migrating pipeline handlers one by one. The Camera::Private class is now properly documented, don't exclude it from documentation generation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: camera: Pass Private pointer to Camera constructorLaurent Pinchart
In order to allow subclassing Camera::Private in pipeline handlers, pass the pointer to the private data to the Camera constructor, and to the Camera::createCamera() function. The Camera::Private id_ and streams_ members now need to be initialized by the Camera constructor instead of the Camera::Private constructor, to allow storage of the streams in a pipeline handler-specific subclass of Camera::Private. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: base: extensible: Pass private pointer as unique_ptr<>Laurent Pinchart
The Extensible constructor takes a pointer to a Private instance, whose lifetime it then manages. Make this explicit in the API by passing the pointer as a std::unique_ptr<Private>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16pipeline: vimc: Force complete of request on cancelled buffersUmang Jain
When the stream is stopped, the V4L2VideoDevice sends back all the queued buffers with FrameMetadata::FrameCancelled status. It is the responsibility of the pipeline handler to handle these buffers with FrameMetadata::FrameCancelled. VIMC is currently missing this handling path. As the FrameMetadata::FrameCancelled is set when the stream is stopped, we can be sure that no more queued and re-use of request shall happen. Hence, cancel all the requests' buffers force a complete with completeBuffer(). The issue is caught by the gstreamer_single_stream_test.cpp running with vimc. During the check with meson built-in option '-Db_sanitize=address,undefined' it was observed: ==118003==ERROR: AddressSanitizer: heap-use-after-free on address 0x60e000037108 at pc 0x7f225160c9ac bp 0x7f224a47b620 sp 0x7f224a47b618 READ of size 4 at 0x60e000037108 thread T1 #0 0x7f225160c9ab in libcamera::Request::sequence() const ../include/libcamera/request.h:55 #1 0x7f22518297aa in libcamera::VimcCameraData::bufferReady(libcamera::FrameBuffer*) ../src/libcamera/pipeline/vimc/vimc.cpp:577 #2 0x7f225183b1ef in libcamera::BoundMethodMember<libcamera::VimcCameraData, void, libcamera::FrameBuffer*>::activate(libcamera::FrameBuffer*, bool) ../include/libcamera/base/bound_method.h:194 #3 0x7f22515cc91f in libcamera::Signal<libcamera::FrameBuffer*>::emit(libcamera::FrameBuffer*) ../include/libcamera/base/signal.h:126 #4 0x7f22515c3305 in libcamera::V4L2VideoDevice::streamOff() ../src/libcamera/v4l2_videodevice.cpp:1605 #5 0x7f225181f345 in libcamera::PipelineHandlerVimc::stop(libcamera::Camera*) ../src/libcamera/pipeline/vimc/vimc.cpp:365 The VimcCameraData::bufferReady seems to emit even after the stream is stopped. It's primarily due to vimc's lack of handling FrameMetadata::FrameCancelled in its pipeline handler. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16ipa: vimc: Send and retrieve FrameBuffers from IPAUmang Jain
Plumb through VIMC mojo interface to enable buffers passing. VIMC does not have parameters or statistics buffers but we can mimick the typical case of passing IPA buffers from pipeline handler to IPA using mock buffers. The mock IPA buffers are FrameBuffers which are dmabuf backed (in other words, mmap()able through MappedFramebuffer inside the IPA). This commits shows: - Passing the parameter buffer from the pipeline handler to the IPA through functions defined in mojom interface. - Passing request controls ControlList to the IPA. Any tests using VIMC will now loop in the IPA paths. Any tests running in isolated mode will help us to test IPA IPC code paths especially around (de)serialization of data passing from pipeline handlers to the IPA. Future IPA interface tests can simply extend the vimc mojom interface to achieve/test a specific use case as required. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-16ipa: vimc: Map and unmap buffersUmang Jain
VIMC pipeline handler has dmabuf-backed mock FrameBuffers which are specifically targetted mimicking IPA buffers (parameter and statistics). Map these mock buffers to the VIMC IPA that would enable exercising IPA IPC code paths. This will provide leverage to our test suite to test IPA IPC code paths, which are common to various platforms. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-16pipeline: vimc: Allocate mock IPA buffersUmang Jain
VIMC is a virtual test driver that doesn't have statistics or parameters buffers that are typically passed from a pipeline handler to its platform IPA. To increase the test coverage going forward, we can at least mimick the typical interaction of how a pipeline handler and IPA interact, and use it to increase the test coverage. Hence, create simple (single plane) dmabuf-backed FrameBuffers, which can act as mock IPA buffers and can be memory mapped (mmap) to VIMC IPA. To create these buffers, temporarily hijack the output video node and configure it with a V4L2DeviceFormat. Buffers then can be exported from the output video node using V4L2VideoDevice::exportBuffers(). These buffers will be mimicked as IPA buffers in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-16ipa: vimc: Add configure() functionLaurent Pinchart
As part of an effort to make the vimc IPA usable for testing, extend it with a configure function. The configuration is currently ignored by the IPA. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-14test: gstreamer: Add test for gstreamer single streamVedant Paranjape
This patch adds a test to test if single stream using libcamera's gstreamer element works. We need to work around two distinct issues with ASan when enabled in the build: - glib has a known leak at initialization time. This is covered by the suppression file shipped with glib, but it's not clear how to use it automatically. For now, disable leak detection to avoid test failures. - GStreamer spawns a child process to scan plugins. If GStreamer is compiled without ASan (which is likely) but libcamera is, dlopen()ing the libcamera plugin will cause an ASan link order verification failure. Disable the verification child processes to work around the problem. This requires gcc 8 or newer. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-14raspberrypi: ipa: Add tuning files for "NOIR" ov5647, imx219, imx477 modulesDavid Plowman
"NOIR" modules are ones that have had the IR filters removed but are otherwise identical. The same tuning can be used as for the regular version except that the colour calibration supplied to the AWB algorithm no longer works. Instead we need to switch the algorithm to its basic "grey world" method. Users with "NOIR" modules can switch to the matching "xxx_noir.json" tuning file by using the LIBCAMERA_RPI_TUNING_FILE environment variable. Signed-off-by: David Plowman <david.plowman@raspberypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12ipa: ipu3: Tidy-up includesJacopo Mondi
Tidy-up a bit the inclusions directive in the IPU3 IPA module. In detail: - ipu3.cpp is missing inclusions for: std::abs from <cmath> std::map from <map> std::min/max from <algorithm> std::numeric_limits from <limits> std::unique_ptr from <memory> std::vector from <vector> and does not require <sys/mman.h> - ipu3_agc has two not used inclusions in the header file and one the cpp file and is missing <chrono> for std::literals::chrono_literals - ipu3_awb is missing <algorithm> for std::sort and does not use <numeric> or <unordered_map> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>