summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-28pipeline: raspberrypi: Repurpose RPi::Stream::reset()Naushir Patuck
The original use of RPi::Stream::reset() was to clear the external flag state and free/clear out the framebuffers for the stream. However, the latter is now done through PipelineHandlerRPi::configure(). Rework PipelineHandlerRPi::configure() to call RPi::Stream::setExternal() instead of RPi::Stream::reset() to achieve the same thing. Repurpose RPi::Stream::reset() to instead reset the state of the buffer handling logic, where all internally allocated buffers are put back into the queue of available buffers. As such, rename the function to RPi::Stream::resetbuffers(). This resetbuffers() is now called from PipelineHandlerRPi::start(), allowing the pipeline handler to correctly deal with start()/stop()/start() sequences and reusing the buffers allocated on the first start(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Free buffers in the RPiCamera destructor and re-configureNaushir Patuck
Currently, all framebuffer allocations get freed and cleared on a stop in PipelineHandlerRPi::stopDevice(). If PipelineHandlerRPi::start() is then called without an intermediate PipelineHandlerRPi::configure(), it will re-allocate and prepare all the buffers again, which is unnecessary. Fix this by not freeing the buffer in PipelineHandlerRPi::stopDevice(), but insted doing it in PipelineHandlerRPi::configure(), as the buffers might have to be resized. Add a flag to indicate that buffer allocations need to be done on the next call to PipelineHandlerRPi::start(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Move freeBuffers() to the RPiCameraData classNaushir Patuck
This function used to clear the camera buffers does not belong in the PipelineHandlerRPi class as it only access members of the RPiCameraData, so move it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Avoid over-allocation for ISP Output 1Naushir Patuck
The V4L2DeviceFormat structure for the ISP Output 1 node was a copy of what is used ISP Output 0 node, but with the size changed. However, the plane size and stride values were not updated. So there is a possibility that the buffer might be over-sized for the requested resolution. Fix this by only copying the relevant fields from the ISP Output 0 V4L2DeviceFormat structure, and let the device driver size the planes as needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-25libcamera: base: timer: Drop start() overload with int argumentLaurent Pinchart
The start(unsigned int msec) overload is error-prone, as the argument unit can easily be mistaken in callers. Drop it and update all callers to use the start(std::chrono::milliseconds) overload instead. The callers now need to use std::chrono_literals. The using statement could be added to timer.h for convenience, but "using" is discouraged in header files to avoid namespace pollution. Update the callers instead, and while at it, sort the "using" statements alphabetically in tests. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-25pipeline: rkisp1: Match sensor aspect ratio when generating configurationsLaurent Pinchart
The RkISP1Path::generateConfiguration() function limits the maximum resolution to the sensor resolution, to avoid upscaling. It however doesn't take the sensor aspect ratio into account, which leads to a maximum (and default) resolution of 1920x1920 when using the self path with a sensor that has a higher resolution. Fix it by constraining the minimum and maximum resolutions to match the sensor's aspect ratio. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-25cam: Fix indentation in meson.buildLaurent Pinchart
One if...endif block is incorrectly indented. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: rkisp1: Replace event-based ops with dedicated functionsUmang Jain
The IPARkISP1Interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of operations to dedicated functions: ActionV4L2Set => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadata => metdataReady EventSignalStatBuffer => processStatsBuffer() EventQueueRequest => queueRequest() The lexical of IPARkISP1::metadataReady() will now conflict with the metadataReady Signal being introduced in this patch as part of the interface change. Hence, rename IPARkISP1::metadataReady() to IPARkISP1::prepareReady() to prevent the conflict. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: rkisp1: Drop private exposure and gain limitsUmang Jain
The private members of exposure and gain limits can be dropped from IPARkISP1 since they are not used class-wide and can be easily replaced by local counter-parts. In case they are required to be widely available, these should then sit in IPASessionConfiguration. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23libcamera: framebuffer: Add a missing space in documentationUmang Jain
s/bytesused/bytes used/ Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23libcamera: v4l2_videodevice: Clarify setting of v4l2_buffer timestampUmang Jain
Add a comment to clarify why we set v4l2_buffer timestamp while queuing the buffer (VIDIOC_QBUF). The timstamps are required to be supplied for memory-to-memory devices for output streams which then are copied to capture stream buffers with the help of V4L2_BUF_FLAG_TIMESTAMP_COPY (set by the driver). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23libcamera: v4l2_videodevice: Remove setting of buffer sequenceUmang Jain
The struct v4l2_buffer documentation [1] clearly states that setting of the sequence is done by the driver. libcamera does not really need to set this field while queuing the buffer(s). [1]: https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/buffer.html#struct-v4l2-buffer Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23libcamera: camera_sensor: Add OV5640 sensor propertiesPaul Elder
Add an entry to the sensor properties for the ov5640. Only the first test pattern is included as the others that are exposed by the kernel don't correspond to any that are defined in the libcamera control. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-23ipa: raspberrypi: Add tuning file for IMX296 sensorNaushir Patuck
The Sony IMX296 exists in two versions, colour (Bayer) and monochrome. The tuning file corresponds to the monochrome version. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2022-03-23ipa: raspberrypi: Add camera helper for Sony IMX296 sensorNaushir Patuck
The Sony IMX296 sensor has an exponential gain model, and adds a fixed 14.26µs offset to the exposure time expressed in line units. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23ipa: raspberrypi: cam_helper: Make exposure conversion functions virtualNaushir Patuck
Some sensors (namely the Sony IMX296, whose support will be added shortly) require different conversion formulas between exposure time and exposure lines. Make the Exposure() and ExposureLines() functions virtual to allow this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23libcamera: camera_sensor: Add IMX296 sensor propertiesLaurent Pinchart
The Sony IMX296 is a global shutter sensor with a 1456x1088 pixel array size, with a recommended resolution after CFA interpolation of 1440x1080. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23ipa: raspberrypi: awb: Fix typo in AWB mode conversion tableDavid Plowman
The AwbAuto mode is defined in all the JSON tuning files as "auto", not "normal". The effect of this was that you couldn't switch back to "auto" mode once you had switched away. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-17v4l2: camera_proxy: Fix header include orderKieran Bingham
The includes in the v4l2_camera_proxy do not match the code style and trigger clang-format changes when running checkstyle. Update and fix the include order accordingly Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Use existing local short-hand variable in configure()Laurent Pinchart
The configure() function has a local configuration variable referencing context.configuration for the purpose of shortening lines. Use it instead of context.configuration in the remaining locations, and constify it while at it as the configuration isn't meant to be modified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Reset frame count when configuring AGCLaurent Pinchart
The frame count is used to skip the gain and exposure filtering when starting. It thus needs to be reset when configuring the algorithm, to avoid slower convergence when stopping and restarting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17libipa: Add CameraSensorHelper for OV2740Daniel Scally
The datasheet for the OV2740 gives 0x80 as 1x gain, so real gain is GainCode / 128. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17libcamera: Add OV2740 camera sensor propertiesDaniel Scally
Add camera sensor property entries for the OmniVision 2740 camera sensor. Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17README: Extend gstreamer examplesKieran Bingham
There have been many reports of facing difficulties with the gstreamer element and getting the libcamerasrc to successfully negotiate with other gstreamer elements. This is often due to the current limitations on colorimetry and frame rate support in the element, and can usually be worked around by specifying those explicitly in the caps. Provide a tested example to capture, encode, and stream images as jpeg to a remote device in the gstreamer section of the getting started readme. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: Send lens controls to pipeline handlerDaniel Scally
Pick up the focus value from the AF algorithm and send lens controls along in the frame context. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipu3: Pass lens controls to config infoDaniel Scally
When configuring the pipeline we want to share the controls for any VCM device against the sensor too - pass them to the lensControls member of configInfo Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Rename ctrls_ memberDaniel Scally
Now that we have added lens controls, rename the existiing member of the class to clarify that it relates to the sensor's controls. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: ipa: Add lens control member to ipu3 ipa interfaceDaniel Scally
Add further members to the ipu3 ipa interface that will hold lens controls passed in by configInfo Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: camera_lens: Add function to fetch subdev controlsDaniel Scally
Add a function to the CameraLens class to fetch the V4L2 controls for its V4L2 subdev Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: camera_sensor: Discover VCMs through ancillary linksDaniel Scally
Add a function to check for and initialise any VCMs linked to the CameraSensor's entity by ancillary links. This should initialise the lens_ member with the linked entity. Call the new function during CameraSensor::init(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: media_device: Handle ancillary links in populateLinks()Daniel Scally
The populateLinks() function can't currently handle ancillary links which causes an error to be thrown in process() when the MediaObject cannot be cast to a MediaPad. Add explicit handling for the different link types, creating either pad-2-pad links or else storing the pointer to the ancillary device MediaEntity in the ancillaryEntities_ member of the primary. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15include: linux: Add MEDIA_LNK_FL_ANCILLARY_LINKDaniel Scally
Add the new media link type macro to the header so we can use it to identify the new links. This isn't handled as a sync to the upstream header because the macro is not yet upstream itself. The latest series attempting to add it being found here: https://lists.libcamera.org/pipermail/libcamera-devel/2022-March/029120.html Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15libcamera: Add members to MediaEntity to support ancillary entitiesDaniel Scally
With kernel support for ancillary links, we can describe the relationship between two devices represented individually as instances of MediaEntity. As the only property of that relationship is its existence, describe those relationships in libcamera simply as a vector of MediaEntity pointers to the ancillary devices. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: af: Auto focus for dw9719 Surface Go2 VCMKate Hsuan
Since VCM for surface Go 2 (dw9719) had been successfully driven, this Af module can be used to control the VCM and determine the focus value based on the IPU3 AF state. Based on the values from the IPU3 AF buffer, the variance of each focus step is determined and a greedy approach is used to find the maximum variance of the AF state and an appropriate focus value. The grid configuration is implemented as a context. Also, the grid parameter- AF_MIN_BLOCK_WIDTH is set to 4 (default is 3) since if the default value is used, x_start (x_start > 640) will be at an incorrect location of the image (rightmost of the sensor). Signed-off-by: Kate Hsuan <hpa@redhat.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-11ipa: ipu3: awb: Clamp gain valuesJean-Michel Hautbois
The gain values are coded as u3.13 fixed point values, ie they can not be more than 8. Clamp the values in order to avoid any off limits value which could make the IPU3 behave in a weird manner. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: agc: Introduce lineDuration in IPASessionConfigurationJean-Michel Hautbois
Instead of having a local cached value for line duration, store it in the IPASessionConfiguration::sensor structure. While at it, configure the default analogue gain and shutter speed to controlled fixed values. The latter is set to be 10ms as it will in most cases be close to the one needed, making the AGC faster to converge. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: Shorten exposure and gain linesJean-Michel Hautbois
When the effective sensor values are stored during the EventStatReady event, the lines are long. Fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: Return filtered valueJean-Michel Hautbois
When the current exposure value is calculated, it is cached and used by filterExposure(). Use private filteredExposure_ and pass currentExposure as a parameter. In order to limit the use of filteredExposure_, return the value from filterExposure(). While at it, remove a stale comment. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11libcamera: Fix typo in a function name for camera lens classJean-Michel Hautbois
The CameraLens class implements a function named "setFocusPostion". There is a typo here, fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-04libcamera: pipeline: raspberrypi: Fix scaler crop when sensor is configuredDavid Plowman
We must calculate the initial scaler crop when the camera is configured, otherwise the metadata will report this rectangle as being all zeroes. Because the calculation is identical to that performed later in handling the scaler crop control, we factor it into a small helper function, RPiCameraData::scaleIspCrop. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-03android: camera_request: Lifetime of a Camera3RequestDescriptorUmang Jain
This commit provides a sketch regarding Camera3RequestDescriptor which aids tracking each capture reuqest placed by the android framework to libcamera HAL. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-03android: Document the structures and functions for post-processingUmang Jain
Specifically document: - CameraDevice::sendCaptureResults() - CameraDevice::completeDescriptor() - CameraDevice::streamProcessingComplete() - CameraStream::PostProcessorWorker class - Camera3RequestDescriptor::StreamBuffer structure Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-02-22libcamera: Require gcc 8 or newerLaurent Pinchart
gcc 7 has reached end of life and isn't used as a default compiler by any of the major distributions. It has also been dropped from buildroot. Drop its support in libcamera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-02-21cam: Use structured bindings in range-based for loopsNejc Galof
Use structured bindings range-based for loops for better readability. Signed-off-by: Nejc Galof <galof.nejc@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-15v4l2: v4l2_camera_proxy: Fix timestamp calculationKieran Bingham
The V4L2 Compatibility layer is returning timestamps for buffers which are incorrectly calculated from the frame metadata. The sec component of the timestamp is correct, but the usec component is out, leaving frame captures reporting non-monotonically increasing timestamps, and incorrect frame rate calculations. Fix the usecs calculation reported by the V4L2 adaptation layer. Bug: https://bugs.libcamera.org/show_bug.cgi?id=118 Fixes: 0ce8f2390b52 ("v4l2: v4l2_compat: Add V4L2 compatibility layer") Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-10ipa: raspberrypi: Reduce the controller rate to 30fpsNaushir Patuck
With the controller algorithms running at 60fps, there are some dropped frames when running at very high famerates. Reducing this to 30fps eliminates all these drops without any noticeable changes to the image quality. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-10pipeline: raspberrypi: Simplify image/embedded buffer matching logicNaushir Patuck
Simplify the image and embedded buffer matching logic by removing the assumption that we require a buffer match between the two streams. Instead, if an image buffer does not match with an embedded data buffer, simply use the ControlList provided by DelayedControls for the sensor parameters. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-10pipeline: raspberrypi: Allow Stream::returnBuffer() to handle internal buffersNaushir Patuck
If Stream::returnBuffer() gets passed an internally allocated buffer, it now simply re-queues it back to the device. With this change, the pipeline handler code can be simplified slightly as it does not need multiple code paths for internally allocated and non-internally allocated buffers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-08ipa: raspberrypi: awb: Better handling of how we disable AWBDavid Plowman
We now handle disabling ("pausing") AWB in the same way as AEC/AGC. Instead of letting the pause flag be set so that the code never runs at all, we instead fix the manual settings to the current values (but continue to be called). The algorithm does not restart any calculations in this state, but continues to add AWB metadata to every frame. Therefore certain other algorithms that want to know it (CCM and ALSC, for example) can still find it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-08cam: kms_sink: Use the first suitable pipeline foundEric Curtin
When searching for a suitable pipeline, we mistakenly only break from the inner loop. This results in the last suitable output being selected. Pick the first one instead. Fixes: 1de0f90dd432 ("cam: kms_sink: Print display pipelineconfiguration") Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>