summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-26pipeline: raspberrypi: Fix erroneous bayer buffer requeue on buffer matchingNaushir Patuck
With the recent change in the bayer/embedded buffer matching code, a condition would make the bayer buffer be requeued back to the device, even though it could potentially be queued for matching. This would cause unnecessary frame drops as sync would be lost. The fix is to ensure the bayer buffer only gets requeued if the embedded data buffer queue is not empty, i.e. the buffer truly is orphaned. Additionally, we do this test before deciding to flush any of the two queues of all their buffers. Fixes: 909882b (pipeline: raspberrypi: Rework bayer/embedded data buffer matching) Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-24libcamera: camera: Document the camera and pipeline modelLaurent Pinchart
Introduce a pipeline model that lists the operations applied by the camera pipeline. This is a first step towards defining explicitly how the camera processes images, and how the libcamera controls affect the processing. The initial list of operations is meant to be expanded, and possibly refactored (a block diagram should also be considered to make this easier to read). How the controls affect the pipeline is largely missing at this stage, with only a short explanation of the digital zoom to show how this is meant to be documented. More documentation will be added over time. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: controls: Improve Control documentation grammarKieran Bingham
A few grammatical errors remain in the Control class documentation. Fix them. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Improve AE locked logicDavid Plowman
Previously we required that the sensor absolutely reaches the target exposure, but this can fail if frame rates or analogue gains are limited. Instead insist only that we get several frames with the same exposure time, analogue gain and that the algorithm's target exposure hasn't changed either. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for ↵David Plowman
partly saturated images When parts of an image saturate then the image brightness no longer increases linearly with increased exposure/gain. Having calculated a linear gain value it's better then to try it, allowing for saturating regions, and if necessary increase the gain some more. We repeat this several times. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Fix uninitialised members in Agc ↵David Plowman
constructor Use memset in the constructor for embedded structures, it is tidier and initialises everything. We use the initialiser list for other members. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Report fixed exposure/gain values during ↵David Plowman
SwitchMode When an application has specified fixed exposure time and/or gain they must be programmed into the sensor immediately, even before the sensor has been started. For this to happen they must be written into the image metadata when the SwitchMode method is invoked. We also make the default exposure/gain, when nothing has been set, customisable in the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: awb: Add SwitchMode method to output AWB statusDavid Plowman
The Awb class now implements a SwitchMode method which outputs its AwbStatus for other algorithms to read, should they be interested. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Fetch AWB status only onceDavid Plowman
Introduce a function to fetch the AwbStatus (fetchAwbStatus), and call it unconditionally at the top of Prepare so that both Prepare and Process know thereafter that it's been done. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Improve centre-weighted luminance calucationDavid Plowman
Previously the calculation computed Y for each region before returning the weighted average, which "baked in" the over-importance of small statistics regions. The revised calculation will treat all pixels equally when the region weights are the same, making it easier to use. With the previous scheme, proper "average" metering was difficult to implement. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Rename method to divideUpExposureDavid Plowman
The method formerly known as divvyupExposure is given a more understandable name. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Remove unnecessary lockingDavid Plowman
On the libcamera/VC4 platform the AGC Prepare/Process methods, and any changes to the AGC settings, run synchronously - so a number of mutexes and copies are unnecessary and can be removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Use libcamera debugDavid Plowman
Replace Raspberry Pi debug with libcamera debug. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: pipeline: rkisp1: fix crop configurationHelen Koike
Crop rectangle was not being configured on the isp output pad nor in the resizer input pad, causing an unecessary crop in the image and an unecessary scaling by the resizer when streaming with a higher resolution then the default 800x600. Example: cam -c 1 -C -s width=3280,height=2464 In the pipeline: sensor->isp->resizer->dma_engine isp output crop is set to 800x600, which limits the output format to 800x600, which is propagated to the resizer input format set to 800x600, and the resizer output format is set to the desired end resolution 3280x2464. Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-20src: ipa: raspberrypi: Change 'sport' exposure mode name to 'short'David Plowman
The names have to match for the setting to work. Use the libcamera terminology for consistency (even though it touches more files). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-20src: ipa: raspberrypi: Add missing 'cloudy' AWB modeDavid Plowman
Support the 'cloudy' AWB mode which was left out when the AwbModeTable was introduced. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-17pipeline: raspberrypi: Rework bayer/embedded data buffer matchingNaushir Patuck
There is a condition that would cause the buffers to never be in sync when we using only a single buffer in the bayer and embedded data streams. This occurred because even though both streams would get flushed to resync, one stream's only buffer was already queued in the device, and would end up never matching. Rework the buffer matching logic by combining updateQueue() and tryFlushQueue() into a single function findMatchingBuffers(). This would allow us to flush the queues at the same time as we match buffers, avoiding the the above condition. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-17android: jpeg: Use LGPL-2.1 license for post_processor_jpeg.cppLaurent Pinchart
The JPEG post-processor is marked as licensed under GPL-2.0-or-later. This is an oversight and unvoluntary. License it under the LGPL-2.1-or-later as the rest of the camera HAL implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Umang Jain <email@uajain.com> Acked-by: Hirokazu Honda <hiroh@chromium.org>
2020-11-16ipa: raspberrypi: Use MappedFrameBuffer for the IPA buffersNaushir Patuck
Instead of directly mmaping/unmapping buffers passed to the IPA, use a MappedFrameBuffer. The latter is a cleaner interface, and avoid code duplication. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-16pipeline: raspberrypi: Use MappedFrameBuffer for embedded data buffersNaushir Patuck
Use a MappedFrameBuffer to mmap embedded data buffers for the pipeline handler to use in the cases where the sensor does not fill it in. This avoids the need to mmap and unmap on every frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-16libcamera: pipeline: simple: Reset format on capture side of converterLaurent Pinchart
When configuring the converter, the format is first set on the output side based on the format of the camera pipeline output, and then the format is set on the capture side to match the desired stream configuration. The format parameter passed to V4L2VideoDevice::setFormat() uses the same variable for both calls, which has the unwanted side effect of carrying plane configuration from the output side to the capture side of the converter. In particular, the stride or plane size requested on the capture side can become unnecessarily large when converting to a format with a lower number of bits per pixel (for instance converting YUYV to NV12). Fix this by resetting the format variable before using it to configure the capture side. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-15cam: Move request processing to main threadLaurent Pinchart
The request completion handler is invoked in the camera manager thread, which shouldn't be blocked for large amounts of time. As writing the frames to disk can be a time-consuming process, move request processing to the main thread by queueing an event to the event loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-15cam: event_loop: Add deferred calls supportLaurent Pinchart
Add a deferred cals queue to the EventLoop class to support queuing calls from a different thread and processing them in the event loop's thread. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-15libcamera: Move EventDispatcher to internal APILaurent Pinchart
There's no user of the EventDispatcher (and the related EventNotifier and Timer classes) outside of libcamera. Move those classes to the internal API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-15cam: Use libevent to implement event loopLaurent Pinchart
To prepare for removal of the EventDispatcher from the libcamera public API, switch to libevent to handle the event loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-15test: Get event dispatcher from current threadLaurent Pinchart
Get the event dispatcher from the current thread instead of the camera manager. This prepares for the removal of CameraManager::eventDispatcher(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-13qcam: Clear the pool of free requests upon stopCapture()Paul Elder
To enable reusing Request objects, we kept a pool of free Requests. This pool was not cleared upon stopping capture, however, which caused a segfault when switching to another camera. Fix this by clearing the Request pool on stopCapture(). Fixes: c753223ad6b9 ("libcamera, android, cam, gstreamer, qcam, v4l2: Reuse Request") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2020-11-11libcamera: Update dep5 to specify license for mojoPaul Elder
Add licensing information for mojo in dep5. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-11README, meson: Add dependency on ply and jinja2 for IPA interface generationPaul Elder
Specify in the readme and meson file that we depend on python3-ply and python3-jinja2 for generating the IPA interface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-11utils: ipc: import mojoPaul Elder
Import mojo from the Chromium repository, so that we can use it for generating code for the IPC mechanism. The commit from which this was taken is: a079161ec8c6907b883f9cb84fc8c4e7896cb1d0 "Add PPAPI constructs for sending focus object to PdfAccessibilityTree" This tree has been pruned to remove directories that didn't have any necessary code: - mojo/* except for mojo/public - mojo core, docs, and misc files - mojo/public/* except for mojo/public/{tools,LICENSE} - language bindings for IPC, tests, and some mojo internals - mojo/public/tools/{fuzzers,chrome_ipc} - mojo/public/tools/bindings/generators - code generation for other languages No files were modified. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-10libcamera: v4l2_device: Move start of frame detection to V4L2DeviceNiklas Söderlund
The V4L2_EVENT_FRAME_SYNC event may occur on both V4L2 video-devices (V4L2VideoDevice) and sub-devices (V4L2Subdevice). Move the start of frame detection to the common base class of the two, V4L2Device. There is no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-11-08libcamera: camera: Inherit from ExtensibleLaurent Pinchart
Use the d-pointer infrastructure offered by the Extensible class to replace the custom implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-08libcamera: camera_manager: Inherit from ExtensibleLaurent Pinchart
Use the d-pointer infrastructure offered by the Extensible class to replace the custom implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-08libcamera: Add a base class to implement the d-pointer design patternLaurent Pinchart
The d-pointer design patterns helps creating public classes that can be extended without breaking their ABI. To facilitate usage of the pattern in libcamera, create a base Extensible class with associated macros. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-11-08utils: checkstyle.py: Add d-pointer formatterLaurent Pinchart
Add a formatter to ensure consistent naming of 'd' and 'o' variables related to the d-pointer design pattern, as implemented by the Extensible class. The formatter also ensures that the pointer is always const. const-correctness issues related to the data pointed to will be caught by the compiler, and thus don't need to be checked here. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07gstreamer: libcamerasrc: Delete configuration before stopping camera managerLaurent Pinchart
When closing the libcamerasrc, the reference to camera is released and the camera manager is stopped. However, the camera configuration still exists at that point, and holds a reference to the camera. This leads to a warning from the device enumerator complaining that the media devices are still in use: [1:53:48.792327560] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media1 while still in use [1:53:48.792354022] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media0 while still in use A crash follows when the libcamerasrc is finalized, as deleting the camera configuration will then release the last reference to the camera, which attempts to delete the camera object with deleteLater() without an event dispatcher. Fix it by deleting the camera configuration before stopping the camera manager. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2020-11-07libcamera: Drop unnecessary explicit initialization of V4L2DeviceFormatLaurent Pinchart
The V4L2DeviceFormat class now has default initializers for all members, explicit initialization isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07libcamera: v4l2_videodevice: Check plane count when setting formatLaurent Pinchart
When setting (or trying) a format with a multiplanar device, the V4L2VideoDevice::trySetFormatMeta() function iterates over all planes available in the V4L2DeviceFormat structure. The caller is responsible for setting the plane count, and failure to do so properly may result in memory corruption. This can lead to a crash way after the function returns, making the problem difficult to debug. As the issue is caused by a bug in the caller, use an assertion to catch it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-07libcamera: v4l2_videodevice: Zero-initialize planes in V4L2DeviceFormatLaurent Pinchart
The V4L2DeviceFormat class doesn't have a default constructor, neither does it specifies default member initializers for the plane-related members. This results in the planes array and planesCount members being uninitialized by default, leading to undefined behaviour if the user of the class doesn't initialize it explicitly. Most users initialize V4L2DeviceFormat instances, but some don't. We could fix them, but that would likely turn into a game of whack-a-mole. As there's no use case for instantiating a large number of V4L2DeviceFormat instances in a performance-critical code path, let's instead add default initializers to avoid future issues. While at it, define a type of the structures containing plane information, and use an std::array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Add support for RGB formatsLaurent Pinchart
Add support for 24-bit and 32-bit RGB formats. The fragment samples the texture and reorders the components, using a pattern set through the RGB_PATTERN macro. The pattern stores the shader vec4 element indices (named {r, g, b, a} by convention, for elements 0 to 3) to be extracted from the texture samples, when interpreted by OpenGL as RGBA. Note that, as textures are created with GL_UNSIGNED_BYTE, the RGBA order corresponds to bytes in memory, while the libcamera formats are named based on the components order in a 32-bit word stored in memory in little endian format. An alternative to manual reordering in the shader would be to set the texture swizzling mask. This is however not available in OpenGL ES before version 3.0, which we don't mandate at the moment. Only the BGR888 and RGB888 formats have been tested, with the vimc pipeline handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Store textures in an arrayLaurent Pinchart
In preparation for RGB formats support, store the three Y, U and V textures in an array. This makes the code more generic, and will avoid referring to an RGB texture as textureY_. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Rename yuvData_ to data_Laurent Pinchart
In preparation for RGB formats support, rename the pointer to image data from yuvData_ to data_. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Rename YUV.vert to identity.vertLaurent Pinchart
In preparation for RGB formats support, rename the identity vertex shader from YUV.vert to identity.vert. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Remove unneeded castsLaurent Pinchart
There's no need to cast the yuvData_ unsigned char pointer to a char pointer before performing pointer arithmetics. Drop the unneeded casts. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Keep fragment shader when format doesn't changeLaurent Pinchart
When ViewFinderGL::setFormat() is called, the fragment shader is deleted and recreated for the new format. This results in unnecessary shader recompilation if only the size is changed and the pixel format remains the same. Keep the existing shader in that case. The null test for fragmentShader_ can be removed, as if the shader program is linked, the fragment shader is guaranteed to exist. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-07qcam: viewfinder_gl: Fix fragment shader rebuild when setting formatLaurent Pinchart
When setting a new format, the existing fragment shader is deleted and a new shader should be created. However, the shader pointer isn't set to nullptr after deleting it, resulting in the deleter shader being reused. Fix it by managing shader pointers with std::unique_ptr<> to prevent similar bugs from happening in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-11-05tracepoints: Add SPDX headers and copyright noticesPaul Elder
Add SPDX headers and copyright notices to the tracepoints definition files. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-03Documentation: tracing: Add tracing guidePaul Elder
Add guide for tracepoints, including how to define and use them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-03utils: tracepoints: Add simple statistics scriptPaul Elder
Add a script that scans a trace for IPA call tracepoints, and returns statistics on the time taken for IPA calls. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-03libcamera: request: Add tracepointsPaul Elder
Add and use tracepoints in Request. Requests are core to libcamera operation, thus detecting delays in their processing is important, and serves as a good usage example of tracepoints. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>