| Age | Commit message (Collapse) | Author |
|---|
|
Now that stable versions of all major distributions ship clang-format 12
or newer, we can use the CaseSensitive option for the Qt include
category. This fixes the problem that includes like
#include <queue>
are put near the end.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a gamma algorithm for the rkisp1. It defaults to a gamma of 2.2 which
closely resembles sRGB. No seperate sRGB mode was implemented because the pwl
that models the gamma curve is so coarse that there is basically no difference
between srgb and gamma=2.2. The default can be overridden within the tuning
file or set at runtime using the gamma control.
The gamma algorithm is not enabled by default. This will be done in future
tuning file updates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
std::unordered_map::merge(source) has the side effect of actually moving items
from source to target. In this case the controls were removed from the source
maps on the first call to updateControls() and on the second call to
updateControls() they were missing in the source maps and therefore also
removed from the camera. Fix this by using insert() instead of merge(). This is
most likely cheaper than copy-contructing the source map.
Fixes: 4c5152843a2a ("ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminance")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
A camera gamma of roughly 2.2 is necessary to produce correct output
images on a standard monitor. Add a control for that.
Further information is available here:
https://en.wikipedia.org/wiki/SRGB
https://www.cambridgeincolour.com/tutorials/gamma-correction.htm
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
There was an issue where using map to store the test cases meant that
the test for ignoring unused bits was skipped because of clashing keys.
Fix this by moving the offending test out of the loop.
While at it, also change the arbitrary floating comparison precision to
be more precise.
Also fix a missing documentation brief.
Fixes: 9d152e9c66c1 ("ipa: rkisp1: Add a helper to convert floating-point to fixed-point")
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
uClibc doesn't provide the macros defining parameters for the file
sealing API. Define them manually as a work around.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
uClibc doesn't provide a memfd_create() implementation. Fix it by using
a direct syscall when the function isn't available.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ensure that the memfd file descriptor won't be leaked to child processes
by creating it with MFD_CLOEXEC.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set the default value of controls::rpi::StatsOutputEnable to false,
disabling the functionality. This stops unnecessary copies of the
statistics output ending up in the Request metdata if not needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Allow the DmaBufAllocator used by the software ISP to use memfd() +
/dev/udmabuf for the software ISP destination buffers.
This is useful on Linux distributions where normal users are not allowed
to access /dev/dma_heap/* while they are allowed to access /dev/udmabuf.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The dma-buf allocator currently allocates from CMA and system heaps.
Extend the dma-buf allocator to support allocating dma-buffers by creating
memfd-s and turning those into dma-buffers using /dev/udmabuf.
The buffers allocated through memfd/udmabuf are not suitable for zero-copy
buffer sharing with other devices.
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Users of the DmaHeap class really just want some way to allocate
dma-buffers from userspace. This can also be done by using /dev/udmabuf
instead of using /dev/dma_heap/*.
Rename DmaHeap class to DmaBufAllocator in preparation of adding
/dev/udmabuf support.
And update the DmaHeap class docs to match including replacing references
to "dma-heap type" with "dma-buf provider".
This is a pure automated rename on the code ('s/DmaHeap/DmaBufAllocator/')
+ file renames + doc updates. There are no functional changes.
The DmaBufAllocator objects in vc4.cpp and software_isp.cpp are left named
dmaHeap_ to keep the changes to those 2 files to a minimum.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The subdev embedded data support series includes a change to the
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING ioctls that impacts
the userspace API.
Update to the new API, while preserving backward compatibility to ease
the transition. Document the backward compatibility to only be supported
for two kernel releases. As the routing API isn't enabled in any
upstream kernel yet, users of the API need kernel patches, and are
expected to be able to upgrade quickly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Updated kernel headers to v6.10-rc1 using utils/update-kernel-headers.sh
and re-instating libcamera local modifications.
This includes adding include/linux/udmabuf.h which was not part
of libcamera's include/linux headers before.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
linux/udmabuf.h will be used by upcoming DmaBufAllocator changes and it
is not available on some older kernels.
Add it to the headers to sync.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The coding style names template arguments using CamelCase with an
uppercase initial letter. Fix the template arguments in the rkisp1-utils
test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting in kernel v5.16, the vimc driver stopped hardcoding the scaler
factor. Use this to lift constraints on the camera configuration, and in
particular on the exotic output size alignment to a multiple of 6. As a
result, vimc-based cameras can more easily match common display
resolutions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
On slower machines, a 10s timeout to capture frames with vimc can be too
short and cause test failures. Make the timeout proportional to the
number of frames expected to be captured, using a conservative low
estimate of the frame rate at 2fps. This does not increase the test time
if the vimc driver is fast enough to produce frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
On slower machines, a 1s timeout to capture frames with vimc can be too
short and cause test failures. Make the timeout proportional to the
number of frames expected to be captured, using a conservative low
estimate of the frame rate at 2fps.
By itself, that change could increase the test time quite substantially
on fast platforms, so break from the capture loop as soon as we capture
enough frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The fence test is racy, as it relies on the main loop being executed
between completion of request signalledRequestId_ and
signalledRequestId_ + 1. This usually happens, but is not guaranteed.
To fix the race condition, change the request identification logic by
replacing usage of the cookie value, which is zero-based and wraps
around at nbuffers_ - 1, with a completed request counter that is
one-based and doesn't wrap. The completedRequestId_, expiredRequestId_
and signalledRequestId_ variables now track the identifier of the last
request that has completed, the request whose fence will time out, and
the request whose fence will be signalled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The fence_ class member variable is only used locally in the
FenceTest::run() function. Make it a local variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
On slower machines, a 1s timeout to capture frames with vimc can be too
short and cause test failures. Make the timeout proportional to the
number of frames expected to be captured, using a conservative low
estimate of the frame rate at 2fps.
By itself, that change could increase the test time quite substantially
on fast platforms, so break from the capture loop as soon as we capture
enough frames. To do so, interrupt the dispatcher at every request
completion, or it will only get interrupted after the timer times out.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
TODO #4 was recorded at a time where the IPA module computed gain values
and the ISP computed the look up tables. The gains were higher-level
parameters. Now that the look up tables are computed in the IPA module,
the IPA and ISP are more tightly coupled and the TODO item is less
relevant.
Let's drop the TODO item. We may or may not need to switch to a
different representation in future but there is currently no good need
for this and the conversion of the values would be just waste of CPU
cycles.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constant is used in a single place internally and doesn't belong to
DebayerParams anymore. Let's use 256 directly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Constructing the color mapping tables is related to stats rather than
debayering, where they are applied. Let's move the corresponding code
to stats processing.
The same applies to the auxiliary gamma table. As the gamma value is
currently fixed and used in a single place, with the temporary exception
mentioned below, there is no need to share it anywhere anymore.
It's necessary to initialize SoftwareIsp::debayerParams_ to default
values. These initial values are used for the first two frames, before
they are changed based on determined stats. To avoid sharing the gamma
value constant in artificial ways, we use 0.5 directly in the
initialization. This all is not a particularly elegant thing to do,
such a code belongs conceptually to the similar code in stats
processing, but doing better is left for larger refactoring.
This is a preliminary step towards building this functionality on top of
libipa/algorithm.h, which should follow.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The white balance computation didn't consider black level. This is
wrong because then the computed ratios are off when they are computed
from the whole brightness range rather than the sensor range.
This patch adjusts white balance computation for the black level. There
is no need to change white balance application in debayering as this is
already applied after black level correction.
Exposure computation already subtracts black level, no changes are
needed there.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The documented range of values corresponds to uint8_t, so let's use that
type.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The issue checkers display the line number and line content of each
offending line, but don't show the location of the issue within a line.
Improve checkstyle by adding a marker that points to the exact location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera uses lowercase hex values. Add a corresponding checker.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
|
|
math.h is an exception to the C compatibility header rule, as we prefer
using cmath. Extend the IncludeCheck to warn about it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IncludeCheck warns when code uses C++ standard library headers where
corresponding C compatibility headers are preferred. We have an
exception to that rule for math.h, where cmath is prefered. In order to
prepare for extending checkstyle.py to enforce that rule, refactor the
way the IncludeChecker identifies headers. No functional change is
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix capitalization of the hexdecimal numbers in the test for conversion
between floating point and fixed point numbers.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add helper functions for converting between floating point and fixed
point numbers. Also add tests for them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
GCC 14 thinks `rects` is a "possibly dangling reference to a temporary":
/libcamera/src/android/camera_capabilities.cpp: In member function ‘int CameraCapabilities::initializeStaticMetadata()’:
/libcamera/src/android/camera_capabilities.cpp:1084:46: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
1084 | const Span<const Rectangle>& rects =
| ^~~~~
/libcamera/src/android/camera_capabilities.cpp:1085:83: note: the temporary was destroyed at the end of the full expression ‘(& properties)->libcamera::ControlList::get<libcamera::Span<const libcamera::Rectangle> >(libcamera::properties::PixelArrayActiveAreas).std::optional<libcamera::Span<const libcamera::Rectangle> >::value_or<libcamera::Span<const libcamera::Rectangle> >(libcamera::Span<const libcamera::Rectangle>())’
1085 | properties.get(properties::PixelArrayActiveAreas).value_or(Span<const Rectangle>{});
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
The return value of `value_or()` is indeed a temporary, but binding it
to a reference extends its lifetime. Avoid the warning by not using a
reference; this does not make much difference since `value_or()` does
not return a reference.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ipa::RPi::IpaBase::monoSensor() function doesn't modify the class.
Make it const.
Fixes: 2031e2f29014 ("ipa: rpi: Add accessor function for monoSensor_")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
`YamlObject::contains()` does the same search, doing the lookup twice is
unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is more efficient since only a single vector will be constructed,
and furthermore, it prevents the TOCTOU issue that might arise when
the list of cameras changes between the two queries.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
abi-compliance checker reports 99.7% binary compatibility and 99.9% source
compatibility between v0.2.0 and v0.3.0. The SONAME has been updated
accordingly and applications must be relinked against this version of
libcamera.
Total binary compatibility problems: 2, warnings: 0
Total source compatibility problems: 2, warnings: 0
Specifically, the symbol
- ControlList::merge(struct ControlList const& source )
has been replaced with the new symbol:
- ControlList::merge ( struct ControlList const& source, enum ControlList::MergePolicy policy )
The following commits in this release relate to either a bug fix or improvement
to existing commit.
- utils: ipc: extract-docs: Fix escape characters in regex
- Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca>
- libcamera: Remove empty formats.c
- Fixes: e0a51061bc69 ("libcamera: formats: Add 14-bits Bayer RAW formats")
- libcamera: bayer_format: Add Y12 to bayerToFormat
- Fixes: ec6309571654 ("libcamera: bayer_format: Add unpacked mono 12-bit format to the conversion table")
- apps: common: dng_writer: Add a default case for switch-case on a modulo
- Bug: https://bugs.libcamera.org/show_bug.cgi?id=207
- utils: mojom: Fix build error caused by the mojom tool update
- Fixes: d17de86904f0 ("utils: ipc: Update mojo")
- libcamera: formats: Fix planes bounds check
- Fixes: e83727a194b5 ("libcamera: PixelFormatInfo: Add functions stride and frameSize")
- utils: ipu3: Fix return value check on file output
- Fixes: 23ac77dc4a09 ("utils: ipu3: Add IPU3 raw capture unpack utility")
- ipa: libipa: histogram: Fix documentation of constructor
- Fixes: 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor")
- gstreamer: Fix string memory leak
- Fixes: fc9783acc6083a ("gstreamer: Provide colorimetry <> ColorSpace mappings")
- gstreamer: Use copied camera name
- Fixes: 58feb69f852289 ("gst: libcamerasrc: Implement selection and acquisition")
core:
- include: linux: Update kernel headers to version v6.7
- libcamera: v4l2_subdevice: Enable streams API when supported
- libcamera: base: signal: Update Qt documentation link to Qt 6
- Documentation: Update Qt documentation links to Qt 6
- test: gstreamer: Use env instead of registry edit
- libcamera: Remove empty formats.c
- libcamera: formats: Add 16-bit mono format
- libcamera: formats: Fix sort ordering of R10_CSI2P
- libcamera: bayer_format: Add Y12 to bayerToFormat
- libcamera: v4l2_subdevice: Explain sort order of formatInfoMap
- libcamera: object: Fix thread-bound reference in documentation
- libcamera: signal: Replace object.h inclusion with forward declatation
- test: object-delete: Test deferred delete just before thread stops
- libcamera: thread: Ensure deferred deletion of all objects before stopping
- test: event-thread: Destroy Object from correct thread context
- test: message: Remove incorrect slow receiver test
- test: message: Destroy Object from correct thread context
- test: signal-threads: Destroy Object from correct thread context
- test: timer-thread: Move timer start from wrong thread to separate test
- test: timer-thread: Destroy Object from correct thread context
- libcamera: object: Document and ensure Object deletion constraints
- libcamera: object: Add and use thread-bound assertion
- utils: mojom: Fix build error caused by the mojom tool update
- include: linux: Add RKISP1_V_IMX8MP version
- libcamera: utils: Add to_underlying() helper function
- libcamera: Use utils::to_underlying()
- libcamera: formats: Fix typos in PixelFormatInfo documentation
- utils: checkstyle.py: Don't presume python3 location
- utils: checkstyle.py: Update LogCategoryChecker regexp
- utils: rkisp1: gen-csc-table.py: Don't presume python3 location
- libcamera: formats: Fix planes bounds check
- utils: ipu3: Fix return value check on file output
- README.rst: Report py dependencies
- meson_options: Autodetect pycamera support
- libcamera: controls: Fix typo on thermal
- guides: pipeline-handler: Fix controlInfo_ initialization
- libcamera: v4l2_subdevice: Add 14-bit Bayer formats
- utils: checkstyle.py: Add Co-developed-by to known_trailers
- utils: checkstyle.py: Fix known_trailers sort order
- libcamera: framebuffer_allocator: Move from argument in constructor
- libcamera: framebuffer_allocator: Use default destructor
- libcamera: framebuffer_allocator: Remove entry if allocation fails
- libcamera: controls: Add policy parameter to ControlList::merge()
- libcamera: v4l2_subdevice: Rename V4L2SubdeviceFormatInfo
- libcamera: v4l2_subdevice: Add code member to MediaBusFormatInfo
- libcamera: v4l2_subdevice: Expose media bus format info as internal API
- libcamera: v4l2_subdevice: Extend MediaBusFormatInfo with metadata formats
- libcamera: v4l2_subdevice: Drop V4L2SubdeviceFormat::bitsPerPixel()
- libcamera: v4l2_subdevice: Rename V4L2SubdeviceFormat::mbus_code to code
- libcamera: v4l2_subdevice: Add stream support to get/set functions
- libcamera: v4l2_subdevice: Replace Routing::toString() with operator<<()
- libcamera: v4l2_subdevice: Add V4L2Subdevice::Route structure
- libcamera: camera_sensor: Move related classes to subdirectory
- libcamera: camera_sensor: Drop updateControlInfo() function
- libcamera: camera_sensor: Reorder functions
- libcamera: camera_sensor: Test for read-only HBLANK with READ_ONLY flag
- libcamera: camera_sensor: Expose the Bayer order
- checkstyle: Work around bug in difflib
- utils: tuning: readme: Improve names of dependency packages
- libcamera: internal: Move dma_heaps.[h, cpp] to common directories
- libcamera: dma_heaps: extend DmaHeap class to support system heap
- libcamera: internal: Move SharedMemObject class to a common directory
- libcamera: shared_mem_object: Rename SIZE constant to `size'
- libcamera: shared_mem_object: Reorganize the code and document the SharedMemObject class
- libcamera: software_isp: Add SwStatsCpu class
- libcamera: software_isp: Add Debayer base class
- libcamera: software_isp: Add DebayerCpu class
- libcamera: Introduce SoftwareIsp
- libcamera: swstats_cpu: Add support for 8, 10 and 12 bpp unpacked bayer input
- libcamera: debayer_cpu: Add support for 8, 10 and 12 bpp unpacked bayer input
- libcamera: debayer_cpu: Add BGR888 output support
- libcamera: Add "Software ISP benchmarking" documentation
- libcamera: software_isp: Apply black level compensation
- Documentation: coding-style: Clean up header guard style
- utils: checkstyle.py: Use r'' strings for regular expressions
- utils: checkstyle.py: Drop period at end of Doxygen one liners
- libcamera: device_enumerator: Fix spell error
- libcamera: Fix output spelling error
- libcamera: utils: Avoid infinite recursion with strtod()
- libcamera: shared_mem_object: Fix compilation with uClibc
- meson: Deprecate bitwise operations between different enumeration type
- Revert "meson: Deprecate bitwise operations between different enumeration type"
- test: Don't add current build directory to include path
- libcamera: controls: Generate enum value-name maps
- libcamera: Drop file name from header comment blocks
- libcamera: Drop file name from header comment blocks in templates
- libcamera: Drop remaining file name from header comment blocks
- test: gstreamer: Simplify single stream test
- Documentation: Add option to treat Doxygen warnings as errors
- libcamera: camera_manager: Add environment variable to order pipelines match
- include: linux: Add RGB48 formats
- libcamera: formats: Add RGB48 formats
- include: linux: Add PiSP specific image and config buffer formats
- libcamera: formats: Add PiSP specific image and config buffer formats
- libcamera: v4l2_subdevice: Add missing MEDIA_BUS_FMT_xxxx16_1X16 info
pipeline:
- pipeline: rpi: Always initialize the embedded buffer in tryRunPipeline
- pipeline: rpi: vc4: Use an unpacked format if no packed one is available
- pipeline: simple: Add support for MediaTek MT8365 platforms
- libcamera: pipeline: Add Mali-C55 ISP pipeline
- libcamera: pipeline: simple: fix size adjustment in validate()
- libcamera: pipeline: simple: Rename converterBuffers_ and related vars
- libcamera: pipeline: simple: Enable use of Soft ISP and Soft IPA
- ipu3: Use posix basename
- pipeline: rpi: Avoid duplicating size range for the same pixel format
- libcamera: pipeline: Rename pipelines to a shorter name
- libcamera: pipeline: Add a get factory by name helper
ipa:
- libipa: camera_sensor_helper: Mark createInstance() with override
- utils: ipc: extract-docs: Fix escape characters in regex
- ipa: rkisp1: agc: Wrap variable length C arrays in spans
- ipa: rkisp1: Store hardware parameters in IPA context
- ipa: rkisp1: Fix histogram weights configuration
- ipa: rkisp1: Support the i.MX8MP ISP version
- ipa: rpi: cam_helper: Extend embedded data parsing to RAW14 modes
- utils: ipc: Fix event functions with no parameters
- utils: ipc: Fix async main interface functions with no parameters
- libcamera: ipa: Add Soft IPA
- libcamera: libipa: camera_sensor: Add Sony IMX283 sensor properties
- libcamera: libipa: camera_sensor: Add Sony IMX335 sensor properties
- libcamera: libipa: camera_sensor: Add Sony IMX415 sensor properties
- ipa: libipa: Allow creation of empty Histogram
- ipa: libipa: Add ExposureModeHelper
- ipa: libipa: Add AgcMeanLuminance base class
- ipa: ipu3: Derive ipu3::algorithms::Agc from AgcMeanLuminance
- ipa: ipu3: Remove bespoke AGC functions from IPU3
- ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminance
- ipa: rkisp1: Remove bespoke Agc functions
- ipa: libipa: histogram: Add transform parameter to constructor
- ipa: rpi: Fix for incorrectly reported max shutter speed
- ipa: rkisp1: agc: Fix histogram construction
- ipa: libipa: histogram: Fix documentation of constructor
- ipa: rpi: Add HDR support
- ipa: rpi: Add accessor function for monoSensor_
apps:
- gstreamer: Add meson devenv support
- apps: common: dng_writer: Add a default case for switch-case on a modulo
- doc: gstreamer: Add missing queues
- gstreamer: Map R8/R16 pixel format
- gstreamer: Map 10/12/14/16 bayer formats supports
- cam: capture_script: Make parseRectangles work for non-array
- apps: lc-compliance: Check that requests complete successfully
- apps: lc-compliance: Fix typo in comment
- apps: lc-compliance: Re-organize source directory
- android: camera_device: Save capture settings unconditionally
- v4l2: Unset _TIME_BITS in addition to _FILE_OFFSET_BITS
- v4l2: meson: Keep defines sorted alphabetically
- apps: cam: Add support for PPM output format
- android: camera_device: Always clear descriptors_ in stop()
- apps: cam: Fix C++20 deprecation warning
- apps: qcam: Use standard key sequence for quit action
- gstreamer: Fix string memory leak
- gstreamer: Use copied camera name
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The monoSensor_ member variable will be used by the derived IPAs in an
upcoming commit, so add an accessor function for it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for the following HDR modes in the Raspberry Pi IPA:
- Night mode
- Single exposure mode
- Multi-exposure (merged and unmerged)
The algorithm is updated to expect the HDR short channel to meter
explicitly for highlights. This means that it will not in general
under-expose the short channel more than is actually necessary.
When images don't have much saturation, it's good to detect this so
that some of the boost we want to apply to the dark areas can be
implemented as regular gain. This means we can then adjust the tone
curve less, leading to less flat looking images.
The impact on the HDR algorithm is then that this determines how we
build tonemaps dynamically. The highlights are more-or-less correct
now, so we have to build a power-type curve that gives us the
appropriately configured targets in the lower part of the histogram.
We allow the tuning file to supply the maximum spatial gain value,
rather than the whole curve (though it can supply this if it
wants). Some parameter defaults are tweaked to be generally better
across the range of our cameras.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the missing 16-bit MEDIA_BUS_FMT_xxxx16_1X16 definitions to the
mediaBusFormatInfo table.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2:
- V4L2_PIX_FMT_PISP_COMP1_xxx
- V4L2_PIX_FMT_PISP_COMP2_xxx
Add the Raspberry Pi 5 PiSP Frontend and Backend config formats:
- V4L2_META_FMT_RPI_FE_CFG
- V4L2_META_FMT_RPI_BE_CFG
Add the Raspberry Pi 5 PiSP Frontend statistics format:
- V4L2_META_FMT_RPI_FE_STATS
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2:
- V4L2_PIX_FMT_PISP_COMP1_xxx
- V4L2_PIX_FMT_PISP_COMP2_xxx
Add the Raspberry Pi 5 PiSP Frontend and Backend config formats:
- V4L2_META_FMT_RPI_FE_CFG
- V4L2_META_FMT_RPI_BE_CFG
Add the Raspberry Pi 5 PiSP Frontend statistics format:
- V4L2_META_FMT_RPI_FE_STATS
The corresponding changes submitted to the linux-media mailing list can
be found at:
(series "media: raspberrypi: Add support for PiSP Back End")
https://lore.kernel.org/linux-media/20240502110503.38412-4-jacopo.mondi@ideasonboard.com/
https://lore.kernel.org/linux-media/20240502110503.38412-5-jacopo.mondi@ideasonboard.com/
and for the DRM mailing at:
(patch "[RFC] drm/fourcc: Add RPI modifiers")
https://lore.kernel.org/dri-devel/20240226153854.99471-1-jacopo.mondi@ideasonboard.com/
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 16-bps (48-bpp) RGB output formats to libcamera. These
new formats are defined for the RGB and BGR ordering.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 16-bps (48-bpp) RGB output formats in the uapi headers.
These new formats are defined for the RGB and BGR ordering.
The corresponding change submitted to the linux-media and DRM mailing
lists can be found at:
https://lore.kernel.org/linux-media/20240502110503.38412-3-jacopo.mondi@ideasonboard.com/
and
https://lore.kernel.org/dri-devel/20240226132544.82817-1-jacopo.mondi@ideasonboard.com/
respectively.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To match the enumerated media devices, each registered pipeline handler
is used in no specific order. It is a limitation when several pipelines
can match the devices, and user has to select a specific pipeline.
For this purpose, environment variable LIBCAMERA_PIPELINES_MATCH_LIST is
created to give the option to define an ordered list of pipelines to
match on.
LIBCAMERA_PIPELINES_MATCH_LIST="<name1>[,<name2>[,<name3>...]]]"
Example:
LIBCAMERA_PIPELINES_MATCH_LIST="rkisp1,simple"
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a static helper to the PipelineHandlerFactoryBase class to
allow retrieving a pipeline by name.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PipelineHandlerFactoryBase class has a name that is propagated to
the PipelineHandler instance it creates.
In present implementation, this name comes from the
REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the
stringified name of the PipelineHandler derived class. Therefore,
PipelineHandler factories and instances names can be quite long such as
"PipelineHandlerRkISP1".
A libcamera user may have to explicitly refer to a PipelineHandler name
for configuration purpose: one usage of the name can be to define a
pipeline handlers match list and their priorities. It is desired, for
user convenience, to use a short name to designate a pipeline handler.
Reusing the short pipeline names already defined in the meson option
files is an existing and consistent way of naming pipelines.
This change adds an explicit name parameter to the
REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to
define the name of a pipeline handler factory, instead of the current
pipeline handler class name.
Each pipeline registration is updated accordingly. The short name
assigned corresponds to the pipeline directory name in the source tree.
It is consistent with pipelines names used in meson.
Changing the pipeline name has an impact on the IPA modules: each module
defines a IPAModuleInfo structure. This structure has a pipelineName
member defining the pipeline handler name it shall match with.
Therefore, each internal IPA module definition has to be changed to have
its IPAModuleInfo pipelineName name updated with the short pipeline
handler name.
In addition to this pipelineName member, the IPAModuleInfo structure
also has a name member, associated to the IPA module name. Having
renamed the pipelines to a short name, the pipeline name and the IPA
module names of the IPAModuleInfo structure are the same: for in-tree
IPA, they correspond to the respective pipeline and IPA subdirectories
in the source tree. However the IPA name could be different, for
instance with a close source IPA implementation built out-of-tree. Thus,
it makes sense to keep the IPA name in that structure, as the 2
definitions may not always be redundant.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust for clang-format style fix, reformat commitmsg]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The camera name is copied in gst_libcamera_src_open() as we can't hold
the lock protecting the name while calling GST_ELEMENT_ERROR(). The
GST_ELEMENT_ERROR() macro sends a message on the bus, taking more locks
and possibly causing issues.
However, the current code makes the copy, but does not actually use it.
So fix that.
Fixes: 58feb69f852289 ("gst: libcamerasrc: Implement selection and acquisition")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The string returned by `gst_video_colorimetry_to_string()`
has to be freed, this was missing.
Fixes: fc9783acc6083a ("gstreamer: Provide colorimetry <> ColorSpace mappings")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
