summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-06ipa: ipu3: Move the AWB stats structuresJean-Michel Hautbois
The structure Ipu3AwbCell describes the AWB stats layout on the kernel side. We will need it to be used by the AGC algorithm to be introduced later, so let's make it visible from ipa::ipu3::algorithms and not only for the AWB class. The IspStatsRegion will be needed by AGC too, so let's move it in the same namespace too. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-06android: camera_stream: Set right format for processor output bufferHirokazu Honda
CameraStream always sets the format of processor output buffer to MJPEG. This fixes the issue. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-05libcamera: Fix crash caused by reading uninitialised delayed controlsDavid Plowman
The cause is that we read out delayed values using a frame's sequence number (DelayedControls::get). But we fill the values up (DelayedControls::applyControls) incrementing writeCount by only one even if the sequence number has jumped by several since last time. This is exactly what happens when frames are being dropped. So the fix is to increment writeCount by "as much as the sequence number has jumped since last time", which means that we just follow the sequence number directly. Bug: https://bugs.libcamera.org/show_bug.cgi?id=74 Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-05cam: kms_sink: Print display pipeline configurationLaurent Pinchart
It can be useful, for diagnosis purpose, to know what plane and CRTC the KMS sink auto-selects. Print the display pipeline configuration at start time. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-10-05libcamera: camera_sensor: Reverse the key and value of test pattern mode mapHirokazu Honda
The key and value of the test pattern mode are originally the index of v4l2 control and the corresponding test pattern mode control value. This key and value are useful in the initialization for reporting available test pattern modes. However, the map of the reversed key and value is much more useful in applying a requested test pattern mode. Reverses the key and value of the map as the initialization is one time but the test pattern mode request will be multiple times. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-05gstreamer: Check if Stream configurations were generated correctlyJavier Martinez Canillas
Currently, the gst_libcamera_device_new() function assumes that a call to Camera::generateConfiguration() will always succeed, but that may not be the case and the return value must to be checked. Otherwise, this could lead to a NULL pointer dereference if the pipeline handler fails to generate a config for the VideoRecording stream role. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-04test: gstreamer: Remove unnecessary header file includesVedant Paranjape
Remove header files which were not being used in the test code. The following headers were removed from the gstreamer_single_stream_test: - libcamera/base/utils.h - libcamera/internal/source_paths.h Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-30android: camera_device: Send capture results by inspecting the queueUmang Jain
There is a possibility that an out-of-order completion of capture request happens by calling process_capture_result() directly on error paths. The framework expects that errors should be notified as soon as possible, but the request completion order should remain intact. An existing instance of this is abortRequest(), which sends the capture results on flushing state, without considering order-of-completion. Since we have a queue of Camera3RequestDescriptor tracking each capture request placed by framework to libcamera HAL, we should be only sending back capture results from a single location, by inspecting the queue. As per the patch, this now happens in CameraDevice::sendCaptureResults(). Each descriptor is now equipped with its own status to denote whether the capture request is complete and ready to be send back to the framework or needs to be waited upon. This ensures that the order of completion is respected for the requests. Since we are fixing out-of-order request completion in abortRequest(), change the function to read from the Camera3RequestDescriptor directly, instead of camera3_capture_request_t. The descriptor should have all the information necessary to set the request buffers' state to error. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-30android: camera_device: Mark abortRequest() and notifyError() as constUmang Jain
abortRequest() and notifyError() do not modify any members of CameraDevice hence, these functions can be const. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-30android: camera_device: Transform descriptors_ map to queueUmang Jain
The descriptors_ map holds Camera3RequestDescriptor(s) which are per-capture requests placed by the framework to libcamera HAL. CameraDevice::requestComplete() looks for the descriptor for which the camera request has been completed and removes it from the map. Since the requests are placed in form of FIFO and the framework expects the order of completion to be FIFO as well, this calls for a need of a queue rather than a std::map. This patch still keeps the same lifetime of Camera3RequestDescriptor as before i.e. in the requestComplete(). Previously, a descriptor was extracted from the map and its lifetime was bound to requestComplete(). The lifetime is kept the same by manually calling .pop_front() on the queue. In the subsequent commit, this is likely to change with a centralized location of dropping descriptors from the queue for request completion. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-30android: camera_worker: Use Camera3RequestDescriptor as cookieUmang Jain
Use Camera3RequestDescriptor as cookie for the Capture Request. The cookie is used to lookup descriptors map in CameraDevice::requestComplete(). The map will be transformed to a queue in subsequent commit. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-29android: Wait on fences in CameraStream::process()Jacopo Mondi
Acquire fences for streams of type Mapped generated by post-processing are not correctly handled and are currently ignored by the camera HAL. Fix this by adding CameraStream::waitFence(), executed before starting the post-processing in CameraStream::process(). The change applies to all streams generated by post-processing (Mapped and Internal) but currently acquire fences of Internal streams are handled by the camera worker. Postpone that to post-processing time by passing -1 to the Worker for Internal streams. Also correct the release_fence handling for failed captures, as the framework requires the release fences to be set to the acquire fence value if the acquire fence has not been waited on. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-29libcamera: Simplify header install paths with shortcut variablesLaurent Pinchart
Create local install_dir meson variable to store the full path to the installation directory for the libcamera and ipa headers. This shortens lines and avoids duplicating calls to get_option('includedir'). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-28libcamera: Fix base and ipa include dirLaurent Pinchart
All libcamera headers are meant to be installed in ${prefix}/include/libcamera/libcamera, with pkgconfig specifying the include directory as `-I ${prefix}/include/libcamera`. Applications then include the headers with `#include <libcamera/camera.h>`. The base and ipa headers are meant to be installed in subdirectories of the libcamera headers directory, but are mistakenly installed one level too high, in ${prefix}/include/libcamera. This leads to compilation failures when including the base or ipa header. Fix this by setting the meson libcamera_include_dir variable to the libcamera headers directory. All other header paths are derived from that variable and are now correct. Reported-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Bug: https://bugs.libcamera.org/show_bug.cgi?id=79 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-28meson: Set a SONAME version in the libcamera librariesJavier Martinez Canillas
The libcamera and libcamera-base libraries are currently unversioned, but donwstream users expect these to have a proper SONAME version in order to package them. A stable release has not yet happened because the project is still under development and the API/ABI might change. But having a versioned SONAME would allow distributions to package libcamera, without the need to add any downstream patch to set the version. Since the "0.0.0" version is already used in different places, let's also use that as the library version. The meson build system will use the first part of the version ("0") as the SONAME version, which is aligned with the convention used by other projects: $ ls /lib64/libcamera*so* -1 /lib64/libcamera-base.so /lib64/libcamera-base.so.0 /lib64/libcamera-base.so.0.0.0 /lib64/libcamera.so /lib64/libcamera.so.0 /lib64/libcamera.so.0.0.0 $ objdump -p /lib64/libcamera.so.0.0.0 | grep SONAME SONAME libcamera.so.0 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-28android: camera_device: Fix race on queuing capture requestUmang Jain
The Camera3RequestDescriptor containing the capture request is added to the descriptors_ map after a call to CameraWorker::queueRequest(). This is a race condition since CameraWorker::queueRequest() queues requests to libcamera::Camera asynchronously. The requests may thus complete before they get added to descriptors_, in which case requestComplete() will fail to lookup the request in the map. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-28gstreamer: Fix spelling of the work manager used in a util functionVedant Paranjape
Fix all name in all instances of the function gst_libcamera_get_camera_mananger to gst_libcamera_get_camera_manager. Spelling of manager was incorrect. This patch has no functional changes. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-28libcamera: control_serializer: Fix usage of uninitialized variableLaurent Pinchart
The idMap variable may be used uninitialized in the ControlSerializer::deserialize<ControlList>() function as reported by gcc 11: ../../src/libcamera/control_serializer.cpp: In member function ‘T libcamera::ControlSerializer::deserialize(libcamera::ByteStreamBuffer&) [with T = libcamera::ControlList]’: ../../src/libcamera/control_serializer.cpp:609:33: error: ‘idMap’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 609 | ControlList ctrls(*idMap); | This is due to a missing default case in a switch/case. Fix it by adding the default case. Fixes: 6b1404fc4836 ("libcamera: control_serializer: Fix usage of uninitialized variable") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-27Documentation: application-developer: Add camera detection checkLaurent Pinchart
The simple-cam application has a check to ensure that at least one camera is present before attempting to access the first camera, to avoid a crash. Update the application developer's guide to match this behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-27Documentation: application-developer: Use correct type to store sizeLaurent Pinchart
The return type of std::vector::size() is size_t. Use the same type, instead of unsigned int, to store its return value when retrieving the number of allocated buffers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-27Documentation: application-developer: Make global variable staticLaurent Pinchart
The global "camera" variable isn't accessed outside of its compilation unit. Make it static. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-27android: Fix generation of thumbnail for EXIF dataUmang Jain
Generation of thumbnail is not occuring currently because ANDROID_JPEG_THUMBNAIL_SIZE is not set for request metadata passed to PostProcessorJpeg::process(). The commit 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata") introduced the mechanism to retrieve the thumbanil size from request metadata, however it didn't add the counterpart i.e. inserting the size in the request metadata in request metadata template, at the first place. The patch fixes this issue by setting ANDROID_JPEG_THUMBNAIL_SIZE in the request metadata template populated by CameraCapabilities::requestTemplatePreview(). The value for ANDROID_JPEG_THUMBNAIL_SIZE is set to be the first non-zero size reported by static metadata ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES. Fixes: 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-27android: camera_capabilities: Clarify CameraMetadata allocationUmang Jain
CameraMetadata's constructor take in number of entries and number of bytes to be allocated for those entries. However, CameraMetadata is already capable of resizing its container on the fly, in case more entries are added to it. Hence, the numbers passed in during the construction acts as hint values for initialization. Clarify this in CameraCapabilities::requestTemplatePreview() and remove the \todo, as the arguments and the \todo gives the perspective that we need to be quite accurate with the numbers of entries / bytes, which is not the case. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-27libcamera: control_serializer: Separate the handles spaceJacopo Mondi
Two independent instances of the ControlSerializer class are in use at the IPC boundaries, one in the Proxy class that serializes data from the pipeline handler to the IPA, and one in the ProxyWorker which serializes data in the opposite direction. Each instance operates autonomously, without any centralized point of control, and each one assigns a numerical handle to each ControlInfoMap it serializes. This creates a risk of potential collision on the handle values, as both instances will use the same numerical space and are not aware of what handles has been already used by the instance "on the other side". To fix that, partition the handles numerical space by initializing the control serializer with a seed according to the role of the component that creates the serializer and increment the handle number by 2, to avoid any collision risk. While this is temporary and rather hacky solution, it solves an issue with isolated IPA modules without too much complexity added. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27libcamera: control_serializer: Serialize info::def()Jacopo Mondi
The ControlInfo class was originally designed to only transport the control's minimum and maximum values which represent the control's valid limits. Later the default value of the control has been added to the ControlInfo class, but the control serializer implementation has not been updated accordingly. This causes issues in IPA modules making use of ControlInfo::def() as, when running in isolation, they would receive 0. Fix that by serializing and deserializing the additional ControlValue and update the protocol description accordingly. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27libcamera: control_serializer: Use the right idmapJacopo Mondi
When a ControlList is deserialized, the code searches for a valid ControlInfoMap in the local cache and use its id map to initialize the list. If no valid ControlInfoMap is found, as it's usually the case for lists transporting libcamera controls and properties, the globally defined controls::controls id map is used unconditionally. This breaks the deserialization of libcamera properties, for which a wrong idmap is used at construction time. As the serialization header now transports an id_map_type field, store the idmap type at serialization time, and re-use it at deserialization time to identify the correct id map. Also make the validation stricter by imposing to list of V4L2 controls to have an associated ControlInfoMap available, as there is no globally defined idmap for such controls. To be able to retrieve the idmap associated with a ControlList, add an accessor function to the ControlList class. It might be worth in future using a ControlInfoMap to initialize the deserialized ControlList to implement controls validation against their limit. As such validation is not implemented at the moment, maintain the current behaviour and initialize the control list with an idmap. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27ipa: proxy_worker: Reset ControlSerializer on workerJacopo Mondi
When running the IPA in isolated mode, each side of the IPC boundary has an instance of the ControlSerializer class which is used to serializer/deserialize controls before transmitting them on the wire. The IPAProxyWorker, which creates and manages the process the IPA runs in, does not reset its ControlSerializer upon an IPA::configure() call, while the IPAProxy does, effectively creating a misalignment between the two sides of the fence. This obviously creates issues as one side of the IPC runs with a populated and possibly stale cache of ControlInfoMap references, while the other side gets reset every time a new configuration is applied to the Camera. Fix that by resetting the IPAProxyWorker ControlSerializer on an IPA configure() call. This change fixes an issue which is easily triggered by running two consecutive capture sessions with the IPA running in isolated mode: ERROR Serializer control_serializer.cpp:520 Can't deserialize ControlList: unknown ControlInfoMap Fixes: 7832e19a599e ("utils: ipc: add templates for code generation for IPC mechanism") Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-27libcamera: ipu3: Drop entityControls mapJacopo Mondi
The IPA::configure() function has an IPAConfigInfo parameters which contains a map of numerical indexes to ControlInfoMap instances. This is a leftover of the old IPA protocol, where it was not possible to specify a rich interface as it is possible today and each entity ControlInfoMap was indexed by a numerical id and stored in a map. Now that the IPA interface allows to specify parameters by name, drop the map and send the sensor's control info map only. If we'll need more ControlInfoMap to be shared with the IPA, a new parameter can be added to IPAConfigInfo. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-26libcamera: camera_manager: Fix utils.h #include locationLaurent Pinchart
The utils.h header #include is separate from the rest of the group for no reason. Move it to where it should be. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-24libcamera: Standardize URLs to git repositoriesLaurent Pinchart
When the libcamera project was started, we had no public git tree hosted on git.libcamera.org. The problem has been addressed a while ago, and the git.linuxtv.org libcamera repository is now a mirror of the main git tree. The mirror is useful to benefit from the linuxtv.org automated compile tests, but it can also confuse users who don't know where the official version is. To try and clarify this, use the git.libcamera.org URL consistently through the project. This doesn't void the validatity of the linuxtv.org repository which will continue to mirror the libcamera.org repository. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-24android: camera_device: Return unique_ptr from createFrameBufferLaurent Pinchart
Returning a non-managed pointer can cause leaks. Use a unique_ptr<> instead to avoid possible future issues. The std::move() for the planes argument to the FrameBuffer constructor is dropped as it's misleading. FrameBuffer has no constructor that takes an rvalue reference to planes, so the vector was copied despite the move. This only clarifies the intent, no functional change is introduced. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-24libcamera: v4l2_videodevice: Don't move planes to construct FrameBufferLaurent Pinchart
The FrameBuffer class has no constructor that takes an rvalue reference to planes. The std::move() is thus misleading as a copy will still take place. Drop it to clarify the code, no functional change is introduced. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-24test: gstreamer: Add a test for gstreamer multi streamVedant Paranjape
This patch adds a test to test if multi stream using libcamera's gstreamer element works. Test will run only on devices that support multistream capture, eg., devices that use IPU3 and raspberrypi pipeline. This was tested on a Raspberry Pi 4B+. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: v4l2_compat: Skip vimc as a test candidatePaul Elder
As the vimc scaler prevents us from passing v4l2-compliance, skip it until the fix has been merged. Instead of removing it from the supported_pipelines list, add an extra check, since we will have the same construct later when we check for the kernel version. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-23test: gstreamer: Simplify elements' ownershipsVedant Paranjape
In gstreamer, when elements are created, usually a floating [1] reference is returned which simply means, there is no ownership transfer (yet). Once can simply check for NULL and return through an error path, without bothering to clean up. Hence, g_autoptr is not much of help here. If the NULL checks have been passed successfully, elements are ready to use. However, we must claim ownership/reference it before using them via g_object_ref_sink(). This patch build upon this principle and removes the g_autoptr from gstreamer test base class (gstreamer_test.cpp) whereever necessary to tide up the code. [1] https://gstreamer.freedesktop.org/documentation/additional/design/MT-refcounting.html?gi-language=c#refcounting1 Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: gstreamer: Simplify single stream test using functions from GstUtilsVedant Paranjape
Simplify memory handling and complexity of the test by using gst_parse_bin_from_description_full [1]. [1]: https://gstreamer.freedesktop.org/documentation/gstreamer/gstutils.html?gi-language=c#gst_parse_bin_from_description_full Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: gstreamer_single_stream_test: Fix memory leakVedant Paranjape
The test hold a valid reference to convert0_ and sink0_ but not released. This results in a memory leak and can be checked via valgrind. Drop the references with test cleanup() virtual function. Valgrind log (glib and gst suppression files were used): ==345380== LEAK SUMMARY: ==345380== definitely lost: 1,688 bytes in 2 blocks ==345380== indirectly lost: 7,069 bytes in 42 blocks The patch fixes the leaks reported by valgrind above to: ==348870== LEAK SUMMARY: ==348870== definitely lost: 0 bytes in 0 blocks ==348870== indirectly lost: 0 bytes in 0 blocks Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22gstreamer: Convert cm_singleton_ptr to static variableVedant Paranjape
The global pointer pointing to libcamera's CameraManager isn't used outside of the gstlibcamera-utils.cpp compilation unit. Make it static. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-22gstreamer: Support planar formatsKieran Bingham
Existing pipeline handlers already support planar YUV formats. Extend the gstreamer format map to incorporate them. While here, split the formats into distinct groups. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2021-09-22qcam: viewfinder_gl: Support configurable stride in shadersLaurent Pinchart
The RGB and YUV conversion doesn't take the stride into account, neither when creating the textures, nor when sampling them. Fix it by using the stride as the texture width, and multiplying the x coordinate in the vertex shaders by a factor to only sample the active portion of the image. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Add fully-planar YUV formats supportLaurent Pinchart
Add support for the YUV420, YVU420 and YUV422 formats supported by libcamera. YUV420 can be produced by the Raspberry Pi pipeline handler, being able to display it is useful for testing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Rename YUV and NV to YUVPacked and YUVSemiPlanarLaurent Pinchart
To prepare for fully-planar YUV support, rename the existing format families YUV and NV to YUVPacked and YUVSemiPlanar respectively. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Add configurable stride supportLaurent Pinchart
Make the stride configurable to support conversion of images with padding at the end of lines. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: viewfinder: Pass stride value to viewfinderLaurent Pinchart
qcam currently assumes that no padding is used at end of lines, and uses the image width as the stride. This leads to rendering failures with some formats on some platforms. To prepare for stride support, add a stride parameter to the ViewFinder::setFormat() function to pass the stride from the stream configuration to the viewfinder. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22android: camera_device: Configure one stream for identical stream requestsHirokazu Honda
An Android HAL client may request multiple identical streams. It is redundant that a native camera device produces a separate stream for each of the identical requests. Configure the camera with a single stream in that case. The other identical HAL streams will be produced by the YUV post-processor. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-22android: camera_stream: Support PostProcessorYuv in CameraStreamHirokazu Honda
CameraStream creates PostProcessorYuv if the destination format is NV12. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-22android: camera_stream: Create post processor in configure()Hirokazu Honda
CameraStream creates PostProcessor and FrameBufferAllocator in the constructor. CameraStream assumes that a used post processor is JPEG post processor. Since we need to support various post processors, we would rather move the creation to configure() so as to return an error code if no proper post processor is found. This also moves FrameBufferAllocator and Mutex creation for consistency. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-21android: jpeg: Rectify variable naming style.Umang Jain
Rectify variable renaming style for YPlaneSize, UVPlaneSize. libcamera uses camelCase where first letter should be in lower case. Fixes: e355ca0087cd9("android: jpeg: Split and pass the thumbnail planes to encoder") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-21android: yuv: Remove CameraDevice forward-declareUmang Jain
YUV post-processor doesn't need any instance reference from CameraDevice class. Remove it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-19libcamera: base: Add libatomic dependencyFabrice Fontaine
Add libatomic dependency which is needed since the addition of the base support library in commit 27aff949fbc1 ("libcamera/base: Move extended base functionality") to avoid the following build failure: /tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/libcamera/base/libcamera-base.so.p/message.cpp.o: in function `libcamera::Message::registerMessageType()': message.cpp:(.text+0x290): undefined reference to `__atomic_fetch_add_4' Fixes: 27aff949fbc1 ("libcamera/base: Move extended base functionality") Fixes: http://autobuild.buildroot.org/results/6e3471df8e9312a1789ca05ae70cc2283bfeec23 Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>