summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-08ipa: ipu3: Inline fillParams() in fillParamsBuffer()Umang Jain
Since we have moved away from switch/case on the operation ID, there's little reason to split the operation in two functions. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-08ipa: ipu3: Replace event-based ops with dedicated functionsUmang Jain
The IPAIPU3 interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of actions to signals are: ActionSetSensorControls => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadataReady => metadataReady The translated naming scheme of events to dedicated functions are: EventProcessControls => queueRequest() EventStatReady => processStatsBuffer() EventFillParams => fillParamsBuffer() The dedicated functions are called from pipeline-handler to the IPA using IPC. These functions run asynchronously and when completed, the IPA emits the respective signals as stated above in the translated naming scheme. The EventProcessControls is translated to queueRequest() to bring symmetry to the IPU3 interface with other IPA interfaces. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-07test: v4l2_videodevice: Fix format configuration in the vimc pipelineLaurent Pinchart
The V4L2VideoDeviceTest class configures the capture pipeline with parameters that are partly hardcoded, and partly come from the current configuration of the device. In particular, with the vimc pipeline, the sensor subdevice is configured with the size retrieved from the capture video node, and the video node is then reconfigured to 640x480. Relying on the current (and thus possibly random) device configuration can lead to broken pipes when starting streaming. This currently causes failures of the dequeue_watchdog test when run after the formats test. Fix it by explicitly setting the same size for both the vimc subdevs and the video capture device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07test: v4l2_videodevice: dequeue_watchdog: Check return value of streamOnLaurent Pinchart
If the streamOn() call fails, there is no way the test will then succeed. Catch it and return a failure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07test: v4l2_videodevice: dequeue_watchdog: Log message on failuresLaurent Pinchart
Failing a test without an error message makes it difficult to debug issues. Add a message when buffer allocation fails. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-07libcamera: v4l2_videodevice: Fix uninitialised watchdogDuration_Umang Jain
Initialise the watchdogDuration_ member to 0ms before it is used in rest of the code base. Failing to do so, spews out log warnings regarding dequeue timer being expired. Fixes: 16f3d2de50ff ("libcamera: v4l2_videodevice: Add a dequeue timer") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-07libcamera: base: utils: Add missing constructor for DurationLaurent Pinchart
The Duration class is missing the equivalent to the std::chrono::duration constructor that takes a number of ticks expressed as a scalar. Fix it, which allows initializing a Duration instance to 0 or 0.0. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-06libcamera: camera_sensor: Drop const on the return value of sizes()Laurent Pinchart
The sizes() function returns a value, not a reference. There's no need for it to be const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-06libcamera: v4l2_videodevice: Fix typos in a commentNaushir Patuck
Is/ingore/ignore/ and s/prevetn/prevent/ Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06test: v4l2_videodevice: Verify the Dequeue WatchdogKieran Bingham
Add a test that captures 5 frames, with a short (5ms) watchdog. The default framerate of the VIMC pipeline should ensure that we never meet this watchdog, and the timeout should activate. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06pipeline: raspberrypi: Add a Unicam dequeue timeoutNaushir Patuck
Enable the V4L2VideoDevice dequeue timeout for the Unicam Image node, and connect the timeout signal to a slot in the pipeline handler. This slot will log an error message informing the user of a possible hardware stall. The timeout is calculated as 2x the maximum frame length possible for a given mode, returned by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06libcamera: v4l2_videodevice: Add a dequeue timerNaushir Patuck
Add a timer that gets reset on every buffer dequeue event. If the timeout expires, optionally call a slot in the pipeline handler to handle this condition. This may be useful in detecting and handling stalls in either the hardware or device driver. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06ipa: raspberrypi: alsc: Limit the calculated lambda valuesNaushir Patuck
Under the right circumstances, the alsc calculations could spread the colour errors across the entire image as lambda remains unbound. This would cause the corrected image chroma values to slowly drift to incorrect values. This change adds a config parameter (alsc.lambda_bound) that provides an upper and lower bound to the lambda value at every stage of the calculation. With this change, we now adjust the lambda values so that the average across the entire grid is 1 instead of normalising to the minimum value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-06Documentation: Briefly document the mail-based contribution processLaurent Pinchart
While familiarity with git is nowadays common, many developers are not familiar with mail-based patch submission. Add a paragraph to the contribution guide to mention that libcamera uses a mail-based process (which seems to have been taken for granted so much that we forgot to say it explicitly), and link to git-send-email.io to help newcomers setup git-send-email. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-06ipa: raspberrypi: Correct some of the ControlInfo ranges and defaultsDavid Plowman
Some of the values were listed incorrectly. Specifically: ExposureValue: the range is now centred correctly on zero Brightness: the default value (0.0) is made explicit Contrast: the default value is corrected to be 1.0 Saturation: the default value is corrected to be 1.0 Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-02Documentation: guides: introduction: Fix spelling errorsKunal Agarwal
Fixes two spelling mistakes in introduction.rst This patch has no functional changes. Signed-off-by: Kunal Agarwal <kunalagarwal1072002@gmail.com> Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-04-02ipa: vimc: Rename processControls() to queueRequest()Umang Jain
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1) that uses queueRequest() to pass in the request controls to IPA. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-02ipa: rkisp1: Split queuing of request and parameter fillingUmang Jain
Queuing of request (i.e. passing of controls to the IPA) and filling of the parameters buffer are two separate operations. Treat them as such by splitting them into two functions in the rkisp1 IPA interface. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add OV5640 helperPaul Elder
The OV5640 is an OmniVision sensor with a linear gain model, expressed in 1/16 steps. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-01libipa: camera_sensor_helper: Add IMX296 helperLaurent Pinchart
The IMX296 is a Sony sensor that expresses its gain in 0.1dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add IMX290 helperLaurent Pinchart
The IMX290 is a Sony sensor that expresses its gain in 0.3dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Implement exponential gain modelLaurent Pinchart
The CameraSensorHelper specifies two gain models, linear and exponential. They are modelled after the MIPI CCS specification. Only the linear model has been implemented, the exponential model was left for later. We now need to support sensors that configure their gain in a hardware register with a value expressed in dB. This has similarities with the MIPI CCS exponential gain model, but is only has an exponential factor, while CCS also allows sensors to support a configurable linear factor. The full CCS exponential model needs two values (for the linear and exponential factors) to express a gain, while IPAs use a single linear gain value internally. However, the exponential gain model example in the CCS specification has a fixed linear factor, which may indicate that it could be common for sensors that implement the exponential gain model to only use the exponential factor. For this reason, implement the exponential gain model with a fixed linear factor, but with a sensor-specific coefficient for the exponential factor that allows expressing the gain in dB (or other logarithmical units) instead of limiting it to powers of 2 as in the MIPI CCS specification. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Reorganize gain constantsLaurent Pinchart
To prepare for other gain models than the linear model, store the gain constants in a union with per-model members. Due to the lack of designated initializer support in gcc with C++17, initializing a single complex structure that includes a union will be difficult. Split the gain model type to a separate variable to work around this issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libcamera: v4l2_videodevice: Fix potential errno overwriteLaurent Pinchart
The errno variable can potentially be overwritten by operator<<(). Store it in a local variable before logging the error message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-29libcamera: camera_sensor: Add IMX290 sensor propertiesLaurent Pinchart
The Sony IMX290 is a rolling shutter sensor with a 1945x1109 pixel array size, with a recommended resolution after CFA interpolation of 1920x1080. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-29gstreamer: Fix typo in commentLaurent Pinchart
Possibly the most trivial patch. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-28ipa: ipu3: Ensure controls exists in before they are queriedUmang Jain
Add a validation check for sensor controls validateSensorControls() before they are queried in IPAIPU3::updateSessionConfiguration(). Fail the IPAIPU3::configure() if the required sensor controls are not found. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Drop sensor controls private members from IPAIPU3Umang Jain
Drop exposure, gain private members from IPAIPU3 because the values are handled directly via IPAFrameContext. Move the default vblank value from IPAIPU3 to IPASessionConfiguration structure as it is a default static value not expected to change for a session. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: ipu3: Consolidate querying of exposure and gain limitsUmang Jain
The exposure and gain limits are required for AGC configuration handled in IPAIPU3::updateSessionConfiguration(), which is happening already. Therefore the max/min private members in IPAIPU3 class for exposure/gain serve no use except setting initial values of exposure_ and gain_ members. Drop the max/min private members from IPAIPU3 class and set initial gain_ and exposure_ in IPAIPU3::updateSessionConfiguration(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Introduce AWBJean-Michel Hautbois
The RkISP1 ISP calculates a mean value for Y, Cr and Cb at each frame. There is a RGB mode which could theoretically give us the values for R, G and B directly, but it seems to be failing right now. Convert those values into R, G and B and estimate the gain to apply in a grey world. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: agc: Add a histogram-based gainJean-Michel Hautbois
As for the IPU3, we can estimate the histogram of the luminance. The RkISP1 can estimate multiple ones, the R, G and B ones, the Y only one and a combination of RGB. The one we are interested by in AGC is the Y histogram. Use the hardware revision to determine the number of bins of the produced histogram. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: libipa: Histogram: Constify the constructor spanJean-Michel Hautbois
The Histogram constructor does not modify the data. Pass it a Span<const uint32_t> instead of a Span<uint32_t>. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Introduce Black Level CorrectionJean-Michel Hautbois
In order to have the proper pixel levels, apply a fixed black level correction, based on the imx219 tuning file in RPi. The value is 4096 on 16 bits, and the pipeline for RkISP1 is on 12 bits, scale it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28ipa: rkisp1: Use frame counter for the request queuedJean-Michel Hautbois
Introduce a frameCount variable in the IPAFrameContext which increments each time a request is queued. It is reset at configure call, when the camera is started. This will allow the frameCount to be used by other algorithms, without having to keep multiple private frame counters. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28utils: hooks: pre-push: Catch commits without author's SoBLaurent Pinchart
The pre-push git hook script catches commits without a SoB line corresponding to the committer, but doesn't perform the same check on the author. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-28test: Test V4L2BufferCache::isEmpty() member functionNaushir Patuck
Add a test for V4L2BufferCache::isEmpty() for various levels for cache fullness. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28libcamera: v4l2_videodevice: Empty the V4L2 buffer cache on streamOff()Naushir Patuck
When streamOff() is called, ensure the cache entries for the remaining queued buffers are freed since this will not happen via the dequeueBuffer() mechanism. Additionally, add a V4L2BufferCache::isEmpty() function and assert that the cache is empty at the end of the streamOff() call. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28libcamera: v4l2_videodevice: Do not allow buffer queueing in stopping stateNaushir Patuck
If the device is in the process of being stopped (i.e. Stopping state), any call to queueBuffer() must fail. This is to ensure the integrity of the buffer queue, as it gets cleared at the end of streamOff. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28libcamera: v4l2_videodevice: Better tracking of the device stateNaushir Patuck
Replace the existing streaming_ state variable with an enum to track the following three state: Streaming, Stopping, and Stopped. The alternate states will be used in a subsequent commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Repurpose RPi::Stream::reset()Naushir Patuck
The original use of RPi::Stream::reset() was to clear the external flag state and free/clear out the framebuffers for the stream. However, the latter is now done through PipelineHandlerRPi::configure(). Rework PipelineHandlerRPi::configure() to call RPi::Stream::setExternal() instead of RPi::Stream::reset() to achieve the same thing. Repurpose RPi::Stream::reset() to instead reset the state of the buffer handling logic, where all internally allocated buffers are put back into the queue of available buffers. As such, rename the function to RPi::Stream::resetbuffers(). This resetbuffers() is now called from PipelineHandlerRPi::start(), allowing the pipeline handler to correctly deal with start()/stop()/start() sequences and reusing the buffers allocated on the first start(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Free buffers in the RPiCamera destructor and re-configureNaushir Patuck
Currently, all framebuffer allocations get freed and cleared on a stop in PipelineHandlerRPi::stopDevice(). If PipelineHandlerRPi::start() is then called without an intermediate PipelineHandlerRPi::configure(), it will re-allocate and prepare all the buffers again, which is unnecessary. Fix this by not freeing the buffer in PipelineHandlerRPi::stopDevice(), but insted doing it in PipelineHandlerRPi::configure(), as the buffers might have to be resized. Add a flag to indicate that buffer allocations need to be done on the next call to PipelineHandlerRPi::start(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Move freeBuffers() to the RPiCameraData classNaushir Patuck
This function used to clear the camera buffers does not belong in the PipelineHandlerRPi class as it only access members of the RPiCameraData, so move it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-28pipeline: raspberrypi: Avoid over-allocation for ISP Output 1Naushir Patuck
The V4L2DeviceFormat structure for the ISP Output 1 node was a copy of what is used ISP Output 0 node, but with the size changed. However, the plane size and stride values were not updated. So there is a possibility that the buffer might be over-sized for the requested resolution. Fix this by only copying the relevant fields from the ISP Output 0 V4L2DeviceFormat structure, and let the device driver size the planes as needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-25libcamera: base: timer: Drop start() overload with int argumentLaurent Pinchart
The start(unsigned int msec) overload is error-prone, as the argument unit can easily be mistaken in callers. Drop it and update all callers to use the start(std::chrono::milliseconds) overload instead. The callers now need to use std::chrono_literals. The using statement could be added to timer.h for convenience, but "using" is discouraged in header files to avoid namespace pollution. Update the callers instead, and while at it, sort the "using" statements alphabetically in tests. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-25pipeline: rkisp1: Match sensor aspect ratio when generating configurationsLaurent Pinchart
The RkISP1Path::generateConfiguration() function limits the maximum resolution to the sensor resolution, to avoid upscaling. It however doesn't take the sensor aspect ratio into account, which leads to a maximum (and default) resolution of 1920x1920 when using the self path with a sensor that has a higher resolution. Fix it by constraining the minimum and maximum resolutions to match the sensor's aspect ratio. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-25cam: Fix indentation in meson.buildLaurent Pinchart
One if...endif block is incorrectly indented. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: rkisp1: Replace event-based ops with dedicated functionsUmang Jain
The IPARkISP1Interface currently uses event-type based structures in order to communicate with the pipeline-handler (and vice-versa). Replace the event based structures with dedicated functions associated to each operation. The translated naming scheme of operations to dedicated functions: ActionV4L2Set => setSensorControls ActionParamFilled => paramsBufferReady ActionMetadata => metdataReady EventSignalStatBuffer => processStatsBuffer() EventQueueRequest => queueRequest() The lexical of IPARkISP1::metadataReady() will now conflict with the metadataReady Signal being introduced in this patch as part of the interface change. Hence, rename IPARkISP1::metadataReady() to IPARkISP1::prepareReady() to prevent the conflict. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23ipa: rkisp1: Drop private exposure and gain limitsUmang Jain
The private members of exposure and gain limits can be dropped from IPARkISP1 since they are not used class-wide and can be easily replaced by local counter-parts. In case they are required to be widely available, these should then sit in IPASessionConfiguration. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-23libcamera: framebuffer: Add a missing space in documentationUmang Jain
s/bytesused/bytes used/ Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-23libcamera: v4l2_videodevice: Clarify setting of v4l2_buffer timestampUmang Jain
Add a comment to clarify why we set v4l2_buffer timestamp while queuing the buffer (VIDIOC_QBUF). The timstamps are required to be supplied for memory-to-memory devices for output streams which then are copied to capture stream buffers with the help of V4L2_BUF_FLAG_TIMESTAMP_COPY (set by the driver). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>