summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-05libcamera: request: Add operator<<()Jacopo Mondi
With the recent addition of operator<<() in most libcamera core classes to replace usage of the toString() function the Request class was left behind. Add operator<<() for the Request class and reimplement toString(). Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-05libcamera: ipu3: Fix rogue whitespaceChristian Rauch
Fix a comment line wrongly indented with spaces instead of tabs. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-04py: Merge read_event() and get_ready_requests()Tomi Valkeinen
We always call CameraManager.read_event() and CameraManager.get_ready_requests(), so to simplify the use merge the read_event() into the get_ready_requests(). This has the side effect that get_ready_requests() will now block if there is no event ready. If we ever need to call get_ready_requests() in a polling manner we will need a new function which behaves differently. However, afaics the only sensible way to manage the event loop is to use select/poll on the eventfd and then call get_ready_requests() once, which is the use case what the current merged function supports. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-03utils: checkstyle.py: Fix color bleedTomi Valkeinen
If issue.line is None, the the terminal color is never reset back to normal. This causes the yellow color to bleed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-03libcamera: v4l2_subdevice: Add YUV8_1X24 media bus formatLaurent Pinchart
The format is used by the i.MX8 ISI driver that will be supported by the simple pipeline handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-03libcamera: v4l2_subdevice: Add RGB565_1X16 media bus formatLaurent Pinchart
The format is used by the i.MX8 ISI driver that will be supported by the simple pipeline handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-03libcamera: v4l2_subdevice: Use MEDIA_BUS_FMT_* macrosLaurent Pinchart
The V4L2_MBUS_FMT_* macros that define media bus formats are deprecated. Use the MEDIA_BUS_FMT_* macros instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-03libcamera: formats: Add YUV444 and YVU444 pixel formatsLaurent Pinchart
Extend planar YUV format support with 4:4:4 formats. Those formats are used by the i.MX8 ISI driver that will be supported by the simple pipeline handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-03libcamera: formats: Add YVU422 pixel formatLaurent Pinchart
The YVU422 pixel format is defined in both DRM and V4L2. libcamera already supports YUV422, add support for the opposite chroma order. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-06-01py: cam: cam_qt: mmap the fbs only onceTomi Valkeinen
Instead of doing an mmap and munmap every time a Request is complete, mmap all the buffers once at the start of the program. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: MappedFrameBuffer: Add 'fb' propertyTomi Valkeinen
Add 'fb' property to expose the underlying FrameBuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: MappedFrameBuffer: Support non-contextmanager useTomi Valkeinen
Implement non-contextmanager use to MappedFrameBuffer so that we can either: with MappedFrameBuffer(fb) as mfb: ... or mfb = MappedFrameBuffer(fb) mfb.mmap() ... mfb.munmap() While at it, improve the error handling a bit. Note that the mmap() returns self. In other words, one can do this: mfb = MappedFrameBuffer(fb).mmap() ... mfb.munmap() Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: Implement FrameBufferPlaneTomi Valkeinen
Implement FrameBufferPlane class and adjust the methods and uses accordingly. Note that we don't expose the fd as a SharedFD, but as an int. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: Add FrameMetadataPlaneTomi Valkeinen
Add FrameMetadataPlane class and adjust the methods and uses accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: Add Request.__str__()Tomi Valkeinen
Add Request.__str__() which maps directly to Request::toString(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: cam: Drop PIL dependencyTomi Valkeinen
We can use Qt directly to accomplish the same as we do with PIL. A minor downside is that loading MJPEG frame with Qt produces a "Corrupt JPEG data" warning. The resulting picture looks fine, though. So add a message handler to ignore that warning. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: cam: Move conversion funcs to helpers.pyTomi Valkeinen
Move conversion functions from cam_qt.py to helpers.py to clean up the code and so that they can be used from other cam renderers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: unittests: Fix test_select()Tomi Valkeinen
The test_select() currently uses self.assertTrue(len(ready_reqs) > 0) to see that cm.get_ready_requests() returns something. This is not always the case, as there may be two eventfd events queued, and the first call to cm.get_ready_requests() returns all the requests, and thus the second call returns none. Remove the self.assertTrue(len(ready_reqs) > 0) assert. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01py: unittests: Fix test_sleep()Tomi Valkeinen
Waiting for 0.5 secs and expecting that the requests have been completed is... bad. Fix the test case by using cam.read_event() as a blocking wait, and wait until we have received all the requests that we queued. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-01libcamera: base: log: Log to std::cerr if log file can't be openedLaurent Pinchart
If the log file specified through LIBCAMERA_LOG_FILE can't be opened, logging is currently completely disabled. This doesn't match the documented behaviour that tells std::cerr is used instead. Fix it to match the documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01libcamera: base: log: Replace stderr with std::cerr in documentationLaurent Pinchart
While std::cerr and stderr both target the same file by default, this may be overridden by applications. Update the documentation to use std::cerr instead of stderr to be accurate. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01libcamera: base: log: Remove unnecessary local variableLaurent Pinchart
The output local variable in Logger::logSetTarget() isn't necessary. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01libcamera: Use "..." instead of <...> consistently for internal headersLaurent Pinchart
libcamera uses double quotes for #include directives for internal headers. A few <...> have found their way in the code base over time. Fix them. While at it, move an Android header include to the right location. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01utils: checkstyle: Ensure "..." include style for internal headersLaurent Pinchart
libcamera uses the "..." include style for internal headers. Enforce it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01utils: checkstyle: Run the CLangFormatter lastLaurent Pinchart
The IncludeOrderFormatter will be extended with more formatting rules that should be applied before clang-format gets run, as it will influence its output. Add a priority mechanism for formatters, and give a negative priority to the CLangFormatter to make it run last. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01libcamera: Fix incorrect toString() to operator<<() conversionsLaurent Pinchart
Commit 8a845ab078c3 ("libcamera: Replace toString with operator<<() for format classes") incorrectly converted some of the toString() usages, resulting in pointer values being printed instead of formats. Fix it. Fixes: 8a845ab078c3 ("libcamera: Replace toString with operator<<() for format classes") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-27py: Use ln --relative to create symlinksTomi Valkeinen
We create symlinks from the Python bindings build dir to the source dir so that 1) the build dir can be used to use the bindings, and 2) to allow modifications of the source .py files to be used right away without rebuilding. The symlinks were recently fixed and changed to use absolute paths. However, absolute paths ruin one main use case I have: using the bindings from the build dir via nfs from an ARM device. So move back to relative paths, but accomplish this with the --relative parameter for ln, instead of guessing the right relative path as was done before the above-mentioned fix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Generate bindings for propertiesTomi Valkeinen
Generate bindings for properties in a very similar way as done for controls. We do need to distinguish between the two, and thus I added --properties flag to gen-py-controls.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Rename 'efd' to 'event_fd'Tomi Valkeinen
Perhaps it's better to have a more descriptive name here. I also considered just renaming 'efd' to 'fd', but 'event_fd' won. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Re-structure the controls APITomi Valkeinen
Add ControlInfo class and change the controls related methods to resemble the C++ API (e.g. no more string based control methods). We don't implement ControlList or ControlInfoMap but just expose the same data via standard Python dict. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Re-implement controls genenerationTomi Valkeinen
The Python bindings controls generation was not very good. It only covered the enums and they were in the main namespace. This adds the controls somewhat similarly to the C++ side. We will have e.g.: libcamera.controls.Brightness libcamera.controls.AeMeteringModeEnum.CentreWeighted Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: Convert ctx and state to classesTomi Valkeinen
Convert ctx and state dicts to classes. No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: Drop WA_ShowWithoutActivatingTomi Valkeinen
Drop WA_ShowWithoutActivating from the Qt renderers. I added the flag during development phase as I didn't want the window to take the focus, but it should be removed now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: MappedFrameBuffer: Add type hints & docsTomi Valkeinen
Add a few type hints and (minimal) docs to MappedFrameBuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Move MappedFrameBuffer to libcamera.utilsTomi Valkeinen
Move MappedFrameBuffer to libcamera.utils, instead of extending FrameBuffer class with a new mmap() method. This keeps us more aligned to the C++ API. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Add CameraManager.read_event()Tomi Valkeinen
Add CameraManager.read_event() so that the user does not need to call os.read(). We use eventfd, and we must always read 8 bytes. Hiding that inside read_event() makes sense. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Fix None value in ControlType enumTomi Valkeinen
"None" is not a valid name for an enum value, so change it to "Null". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Fix SceneFlicker enum valuesTomi Valkeinen
Stripping 'SceneFlicker' prefix from the enum value names leads to '50Hz' and '60Hz', which are not valid names. So add another heuristics to keep the prefix for SceneFlicker. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: CleanupsTomi Valkeinen
No functional changes. Drop unused variables, reduce typechecker warnings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam_qt: Use libcamera.formatsTomi Valkeinen
Use the new libcamera.formats in cam_qt.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Generate pixel formats listTomi Valkeinen
Generate a list of pixel formats under 'libcamera.formats'. The 'formats' is a "dummy" container class, the only purpose of which is to contain the read-only pixel format properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27libcamera: ipa: Move IPA control serialization structures to libcamera namespaceLaurent Pinchart
The C structures used to serialize controls are currently defined in the root namespace, which places them at the root level in the class list generated by Doxygen. Move them to the libcamera namespace to fix that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libcamera: pipeline: uvcvideo: Infer camera location from removable attributeLaurent Pinchart
Use the removable attribute exposed by the USB device in sysfs to infer if the camera is an external (when removable) or front (when non-removable) camera. This is likely not perfect as the removable attribute is derived from ACPI data which may not always be accurate, and non-ACPI platforms likely report all devices as removable. Still, this is a first step upon which a better method could be built. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libcamera: media_device: Return string references to avoid copiesLaurent Pinchart
The MediaDevice::driver(), deviceNode() and model() functions return a const std::string, copying the string stored internally in the class. Return references instead to avoid copies. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libipa: camera_sensor_helper: Add Sony IMX477 helperNaushir Patuck
Add support for the Sony IMX477 sensor in the camera helper database. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27libcamera: camera_sensor: Add IMX477 sensor propertiesNaushir Patuck
Add an entry to the sensor properties for Sony IMX477. Currently no test pattern modes are supported by the device driver. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-26ipa: camera_sensor_helper: Fix equation in exponential gain documentationLaurent Pinchart
The exponential gain documentation is missing a '\' in the equation. Fix t. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-25libcamera: controls: Controls for driving AF (autofocus) algorithmsDavid Plowman
This patch describes a series of controls that allow applications to drive AF algorithms: AfMode - manual, auto or continuous AfRange - full, macro or normal AfSpeed - fast or slow AfMetering - how to choose where to measure focus AfWindows - AF window locations AfTrigger - start (trigger) an AF scan or cancel AfPause - pause continuous AF LensPosition - set or retrieve position of lens AfState - reports whether scanning/success/failure AfPauseState - reports whether continuous AF paused or not Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add MJPG support to SDL sinkEric Curtin
So we have at least two supported capturing pixel formats (although many possible output pixel formats thanks to SDL conversion). MJPG support only built in if SDL2_image is available, provides decompression. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add SDL sink with initial YUYV supportEric Curtin
This adds more portability to existing cam sinks. You can pass a YUYV camera buffer and SDL will handle the pixel buffer conversion to the display. This allows cam reference implementation to display images on VMs, Mac M1, Raspberry Pi, etc. This also enables cam reference implementation, to run as a desktop application in Wayland or X11. SDL also has support for Android and ChromeOS which has not been tested. Also tested on simpledrm Raspberry Pi 4 framebuffer successfully where existing kms sink did not work. Can also be used as kmsdrm sink. Only supports one camera stream at present. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-29 02:10:10 +0000